In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT511 Insulation Resistance Tester
This product comes with a 3-year warranty. SPECIFICATIONS:
Insulation resistance: 500 kOhm ~ 10 GOhm
- Best accuracy: +/- (3%+5)
Low resistance:
000 Ohm Testing:
000 250V / 500V / 1000V
- best accuracy: 0 ~ 20%
DC voltage: 1000 V
- best accuracy: +/- (1%+3)
AC voltage: 750 V
- best accuracy: +/- (SPIAL%>
FUNCTIONS:
Automatic adjustment
Short-circuit current (< 2 mA)
Data logging (18)
Standby mode
Polarisation index (PI)
Dielectric absorption (DAR)
Timer (approx. 30 minutes)
Backlight
/>Backlight
/>Compare
/>Backlight display. Display: 9999 (123 x 58 mm)
Overrange and high voltage warning
Analogue bar graph
GENERAL FEATURES:
Power: 8 x 1.5 V batteries (R14)
Product dimensions: 202 x 155 x 94 mm
Product weight: 2 kg
ACCESSORIES: alligator clips, batteries, manual, toolbox
/en/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT512 Insulation Resistance Tester
This product comes with a 3-year warranty. SPECIFICATIONS:
Insulation resistance: 0.5 MΩ ~ 100 GΩ
- Best accuracy: +/- (3%+5)
Test voltage: 1500V / 1000V / 2500V
- best accuracy: 0 ~ 20%
DC voltage: 600V
- best accuracy: +/- (2%+5)
AC voltage: 600V
- best accuracy: +/- (2%+5)
- best accuracy: +/- (2%+5)
AC voltage: 600V
- Best accuracy: +/- (2%+5)
Operating current: < 1.8 mA
Data logging: 18
Standby mode
Polarisation index (PI)
Dielectric absorption (DAR)
Timer Approx.: 15 minutes
Compare
Battery display
White display backlight
White display
War
Great War
V/B>
Max. Display: 9999 (123 x 58 mm)
Analogue bar graph
GENERAL FEATURES
Power: 8 x 1.5V alkaline batteries (LR14)
Product dimensions: 202×155×94 mm
Product weight: 1.>
Includes: clamps, batteries, manual, toolbox, USB cable, CD, power adapter
/ro/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT526 Electrical Tester
The UT526 is a universal measuring and testing device for inspecting electrical equipment. It allows for the testing of switchgear, measurement of earth loop resistance, measurement of insulation resistance, measurement of AC voltage frequency, and measurement of DC and AC voltage. The device features a newly designed, durable housing with new analogue, digital and microprocessor circuits.
This device has been designed, manufactured and tested in accordance with the IEC 61010 safety standard (Safety requirements for electrical equipment) in the CAT III 600 V overvoltage category. It fully complies with the ČSN EN 61557 standard for insulation and transient resistance measurement.
Product parameters:
- maximum display: 9999
- display dimensions: 71 x 34 mm
- display shows: operating modes, value switching units and automatic symbols:/>-
measurement of circuit breaker trip time: types 10mA, 30mA, 100mA, 300mA
- earth loop measurement: in the range 0.01Ω to 2000Ω
- insulation resistance measurement: 0.05 MΩ to 1 MΩ when measuring AC frequency
- 0.05 MΩ to 1 MΩ - within the voltage measurement range
- 2000Ω 100 Hz
- AC and DC voltage measurement: 0 V to 440 V
- Power supply: 6 x 1.5V AA alkaline batteries
- An indispensable tool for every inspection technician
- Calibration certificate must be ordered separately
- Outstanding value for money
Technical specifications
:
Circuit breaker trip time measurement
Current measurement: 10mA / 30mA / 100mA / 300mA
Measurement voltage: 220V ± 10%, frequency 45Hz to 65Hz
Measurement accuracy: ± 20V AC: ± 20V 2)
Time measurement range at 10mA current: 0 to 2000msec
Time measurement range at 30mA current: 0 to 500msec
Time measurement range at 100mA current: 0 to 300ms
Time measurement range at a measurement current of 300msec/30): 300msec > measurement current
Accuracy: ± (5% + 2)
Earth loop measurement
Nominal voltage measurement: approx. 5.0 V
Measurement current: >200 mA, for <2 Ω
Earth loop resistance measurement range: 0.01Ω to 2000Ω
Measurement accuracy: 0.01Ω to 2000Ω ± (2% + 5)
Insulation voltage/resistance measurement range: voltage/insulation test 250 V ± 10% or 500 V ± 10% or 1000 V ± 10%
Measurement range: 0.05 to 200MΩ or 0.05 to 300MΩ or 0.05 to 500MΩ
Rated measurement resistance: 1500 kΩ or 2500 kΩ Measurement current: 1500 kΩ 0.9 mA to 1.1 mA
Short-circuit current: <1.8 mA
Measurement accuracy in the range 0.05 MΩ to 500 MΩ: ± (5% + 5)
AC and DCV voltage measurement
AC and DC measurement range:
Measurement range:
DC ± 440 0 to 440V (50 / 60Hz)
Resolution: 1V
Measurement accuracy: ± (2% + 3)
Voltage measurement in the <10V range: reference only
Frequency measurement
Measurement range:
resolution:
200 Hz 1 Hz
Measurement accuracy: for reference only
General parameters:
- low battery indicator: yes, symbol “” on display
- Overload indication (out of range): yes, “OL” symbol on display
- Power supply: 1.5V DC 10mA, approx. 50mA at 1000V range
- LCD display dimensions: 71 x 34 mm
- Operating environment: temperature 0 to +40 °C, humidity max. 85% RH
- Specified accuracy is guaranteed in the following environment: temperature 23 ± 5 °C, humidity: 45–75% RH
- Storage conditions: temperature -20 °C to +60 °C, humidity max. 90% RH
- device dimensions: 160 x 100 x 71 mm
- Device colour: red and grey
- device weight: 380g
- Weight: 0.7 kg (including batteries)
Contents of individual package:
device:
battery:
1.5V, AA: 6 pcs
- test leads with alligator clips: 3 pcs (red, green, blue)
- case: 1 pc
- user manual: 1 pc
Wholesale packaging:
- standard quantity per standard box: 104 x 40 pcs.
- 40 pcs. 180 mm (0.063 CBM)
- total. Standard box weight: 12.8 kg
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT513A Insulation Resistance Tester
This product comes with a 3-year warranty. SPECIFICATIONS:
Insulation resistance: 0.5 MΩ ~ 1000 GΩ
- Best accuracy: +/- (3%+5)
Test voltage: 5000V // 2500V/5000V
- Best accuracy: 0 ~ 20%
DC voltage: 600V
- best accuracy: +/- (2%+5)
AC voltage: 600V
- best accuracy: +/- (2%+5)
AUTOMATIC OPERATION
Engagement
Short-circuit current: < 1.8 mA
Data logging: 18
Standby mode
Polarisation index (PI)
Dielectric absorption rate (DAR)
Timer Approx.: 15 minutes
Compare
Battery display
White display
Backlight
White light range
Warning
USB
Max. Display: 9999 (123 x 58 mm)
Analogue bar graph
GENERAL FEATURES
Power: 8 x 1.5V alkaline batteries (LR14)
Product dimensions: 202×155×94 mm
Product weight: 2 kg,
ACCESSORIES:
batteries, manual, toolbox, USB cable
/en/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT595 Multifunctional Electrical Tester
The UT 595 is a universal measuring and testing device for inspecting electrical equipment. It allows automatic testing of circuit breaker trip times, measurement of leakage currents, measurement of earth loop impedance and earth continuity, measurement of insulation resistance, measurement of AC voltage frequency, and measurement of DC and AC voltage, as well as phase sequence in three-phase systems. It features a durable casing and new analogue, digital and microprocessor circuits.
This device has been designed, manufactured and tested in accordance with the IEC 61010 safety standard (Safety requirements for electrical equipment) in the CAT III 300 V overvoltage category. It fully complies with the ČSN EN 61557 standard for insulation and transient resistance measurement.
The UT595 is the ideal tool for the maintenance, testing and inspection of electrical protection components for every electrician and inspection technician.
Product specifications:
- backlit LCD display:
- backlit LCD display dimensions: 995:00, 125 mm × 37 mm
- The display shows: operating modes, values, units and symbols
- function switch: 15-position rotary switch
- Range switching: automatic
- current measurement of current protectors: types 10mA, 30mA, 100mA, 300mA, phase shift angle 3000mA
- option to change the phase of 300mA by 0° or 180° to detect the fastest response time of the protective equipment
- optional half-wave/full-wave test mode and countdown timer (30 sec)
- automatic circuit breaker tests: sequential switching of leakage currents, smooth increase of leakage current up to the circuit breaker
- storage in memory of the impedance value measured in the loop
- Test (PFC) / short-circuit current (PSC): in the range 0.05Ω to 2000Ω
- earth continuity measurement: in the range 0.01Ω to 200Ω
- Insulation resistance measurement: 0.05 MΩ to 1 MΩ at test voltage 250 V / 500 V AC / AC<br//500 V: frequency from 20 Hz to 100 Hz
- AC and DC voltage measurement: 0 V to 440 V, automatic AC/DC/polarity resolution
- Phase sequence measurement: phase sequence indication, direction of rotation
- Power supply: 6 x 1.5V AA alkaline batteries
- The automatic calibration protocol must be ordered separately
- Must be ordered separately. Device
- Key lock
- An indispensable assistant for every inspection technician
Technical specifications:
- Circuit breaker measurement
Measurement current selection I: 10mA / 30mA / 100mA / 300mA / 300mA
voltage 220V ± 10%, frequency 45Hz to 65Hz
Current measurement accuracy at 220V AC: ± (10% + 2)
Automatic circuit breaker test with current I: 50%, 100%, 200%, 500% of the trip current, at 0% trip current, at Δn trip current interval: 2000 ms
Time measurement range at current 1 * I, Δn: 0 to 500 ms (with countdown function)
Time measurement interval at current 1 * I, Δn: 0 to 300 ms
Time measurement interval at current 2 * I, Δn: 0m0 (with countdown function) to <20:0m0 Measurement range at current 2 * I, Δn: 0 to 150 ms
Time measurement range for current 5 * I, Δn: 0 to 40 ms
Time measurement accuracy: ± (5% + 5)
option to change phase angle 0° / 180° / 180° / 180° short-circuit phase current measurement (PSC)
Operating voltage: 220V ± 10% / 195V to 440V / 45Hz to 65Hz
Current and time measurement: 20A / 20ms
Measurement ranges: 0.05Ω to 1.99Ω; 2.0Ω to 19.9Ω; 20Ω to 2000Ω
Minimum resolution: 0.01Ω
Short-circuit current: 0kA to 26kA
Accuracy: ± (5% + 5)
- Earth continuity measurement
Nominal measurement voltage: approx. 5V
Measurement current: more than 200mA
Measurement range: 0.01Ω to 200Ω
Accuracy in the range 0.01Ω to 200Ω: ± (2% + 5)
- Insulation resistance measurement
Insulation voltage test rate
± 20 V: ± 10% or 500 V ± 10% or 1000 V ± 10%
Measurement range: 0.05 to 250 MΩ, or 0.05 to 500 MΩ, or 0.05 to 1000 MΩ
Nominal measurement current at 250kΩ, or 0.5A at 500kΩ, or 0.5A at 50kΩ: 1.1 mA
short-circuit current: <1.8 mA
Measurement accuracy in the range 0.05 MΩ to 1000 MΩ: ± (5% + 5)
- AC and DCV voltage measurement
AC measurement range: 40 V to ± 40 V DC
Measurement range: 440 V (50/60 Hz)
Resolution: 1 V
Measurement accuracy: ± (2% + 3)
Voltage measurement in the <10V range: for information purposes only
- Frequency measurement
Measurement range:
measurement range:
resolution: 200 Hz
1 Hz
Measurement accuracy: reference only
- Phase sequence measurement
For voltage: Three-phase AC 100 V to 440 V / 45 to 65 Hz
Phase sequence: L1 → L2 → L3 forward rotation; L1 → L2 → L3 reverse rotation
Phase voltage drop: Phase drop in L1, L2 or L3 will be displayed on the LCD screen
General parameters:
- automatic range selection function: yes
- low battery indication: yes, symbol "" on display
, "overload" symbol: yes (indication "out of range"): display
- Power supply: 1.5V AA batteries, 6 pcs
- Current consumption: standby approx. 10mA, approx. 50mA at 1000V
- LCD display dimensions: 125 × 37 mm
- operating environment: temperature 0°C to +40°C, humidity max. 85% RH
- Declared accuracy is guaranteed in the following environment: temperature 23 ± 5 °C, humidity: 45–75% RH
- Storage conditions: temperature -20 °C to +60 °C, humidity max. 90% RH
- Weight: 1 kg (including batteries)
- device dimensions: 210 x 90 x 175 mm
- Device colour: red and grey
Contents of individual package:
- UT595 device: 1 test lead
, 1 × 1)
- 1.5V AA alkaline battery: 6 pcs
- carrying case: 1 pc
- user manual: 1
Wholesale packaging:
- standard quantity per box: 4 pcs
- Standard box dimensions: 510 × 300 mm, total weight 15 kg
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT502A Insulation Resistance Tester
This product comes with a 3-year warranty. UT502A Insulation Resistance Tester.
The UT500 series electrical insulation testers are used to measure the insulation resistance of electrical equipment and household appliances during routine inspections. This is achieved by measuring the insulation resistance between electrical circuits or between circuits and earth (the equipment’s earth). The UT500 series can measure insulation resistance, AC voltage, low resistance, PI (polarisation index) and DAR (dielectric absorption). The individual units in the UT500 series differ from one another in their test voltage ranges (UT501A 100V to 1000V, UT501B 250V to 1000V, UT502A 500V to 2500V), maximum measured insulation resistance (UT501A 5GΩ to 5GΩ, UT502A 0MΩ to 20GΩ) and other parameters.
These testing and inspection devices ensure the correct operation of transformers, generators, high-voltage motors, power capacitors, power cables, surge arresters, circuit breakers, and electrical machinery and equipment. They are ideal devices for carrying out electrical maintenance and are manufactured in accordance with IEC 61010 and IEC 61557 standards.
UT502A specifications:
- insulation resistance measurement from 0 MΩ to 5.5 GΩ
- DC voltage testing 500V /
- measurement of 500V / 12,000V /
dielectric loss tangent and dielectric absorption
- low resistance measurement from 0 to 200Ω
- AC voltage measurement in the range from 30 to 600V (50 / 60Hz)
- overload indication at > 22GΩ
- Backlit LCD display with automatic secondary display switching range
--999 voltage and start functions
- Red warning light
- Powered by 6 x 1.5V (AA) batteries
- low battery indicator
- CAT III 600 V overvoltage protection
UT502A technical specifications:
- insulation resistance measurement / internal voltage measurement / insulation voltage resistance
500V / 0.00MΩ to 5.5GΩ / 1.00 mA to 1.10mA / 500kΩ
1000V / 0.00MΩ to 5.5GΩ / 1.00 mA to 1.10mA / 1M200mA / 1MV / 200kΩ 1.00 mA to 1.10 mA / 1 MΩ
- open-circuit voltage tolerance: +10%
- short-circuit current of test voltage: less than 1.8 mA
- Accuracy range for insulation resistance measurement: 0.00 MΩ to 99.9 MΩ: ±3 Ω; 10 GΩ: ±(5% + 5) Ω; 10 GΩ to 20 GΩ: ±(10% + 5) Ω
- Polarisation index measurement for a measurement time of 10 minutes / 1 minute
- PI value / criterion: ≥ 4 / excellent, 4 to 2.0 / good, ≤ 1.0 / warning, 1.0 / poor
- Measurement of dielectric absorption for 60 sec / 30 sec
- DAR value / criterion: ≥ 1.4 / best, 1.25 to 1.0 / good, ≤ 1 / poor
- low resistance measurement (circuit: 000000000) 200Ω
- resolution: 0.01Ω
- Display reset for more accurate measurements: yes, ZERO button
- open-circuit voltage before measurement: approx. 5.0 V
- current during measurement: approx. 200mA
- Accuracy: ± (2% + 3)
- AC voltage measurement - range: 30 V to 600 V (50 / 60 Hz)
- resolution: 1 V
- Accuracy: ± (2% + 3)
- 60 mm multifunctional LCD display. 34 mm, range 1999
- Display backlight: option for white or red backlight during warning
- automatic range switching: yes
- buzzer: yes, high voltage indication
- Automatic discharge of internal capacitance after measurement: yes
- power supply: 6x alkaline battery (test mode) 1 voltage (test mode) 1 voltage
- low battery indicator: yes, when voltage drops below 7V
- Weight: 0.7kg (including battery)
- Product dimensions: 150 x 100 x 71mm
- Calibration conditions for product colour: red 2 and grey
- Calibration environmental conditions: ±5 °C, humidity 45% to 75%
- Recommended calibration: once a year; the calibration protocol must be ordered separately
- operating conditions: 0 °C to +40 °C / relative humidity 85% or less
- Storage conditions: -20 °C to +60 °C / relative humidity <90% – max. 2000 m
Contents of individual package:
- UT502A unit: 1 pc
- test leads: 1 pair
- alligator clips: 1 pair
- 1.5V AA battery (LR6): 6 pcs
- instructions: English, Czech, Slovak: 1 copy
Wholesale packaging:
- standard quantity per box: 20 pcs
- standard box dimensions: 500 x 380 x 330 mm
- total weight of the box: approx. 18.9 kg
Manufacturer:
https://www.uni-trend.com/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT572 Earth Resistance Tester
This product comes with a 3-year warranty. The UT572 is a smart device for measuring earth resistance and soil resistivity (specific earth resistance). The device is widely used in the design and testing of earthing systems for new electrical installations and lightning protection in construction, industry, substations, telecommunications, etc. (ρ), voltage and frequency of induced interference signals Ust and Fst.
The device features a new design with a large, backlit multifunctional display. It has a durable, double-insulated and reinforced casing.
This device has been designed, manufactured and tested in accordance with safety standards IEC 61010 (Safety requirements for electrical equipment) in the CAT III 300 V overvoltage category, EN 61010-2-033, EN 61010-2-033, EN 61010-031, EN 61010-031.Product parameters.
:
- maximum display: 9999
- backlit multifunctional LCD display with dimensions: 125 mm × 37 mm
- display shows: operating modes, values, units and symbols
- Function and range selection: 8-position rotary switch
- soil resistivity measurement method (ρ, 2-wire) 4-wire
- earth resistance test: RK, RH, RS
- display of interference voltage Ust: up to 50V / AC / DC
- display of interference frequency Fst: in the range from 40 to 500Hz
- test signal frequency: 94Hz and/or 128Hz: probe spacing
128-z: 40 m
- memory storage: up to 20 measurement sets
- Power supply: 8 x 1.5 V AA alkaline batteries
- battery status display: yes, if it drops below 9.5 V, replace the batteries
- automatic switch-off on inactivity: yes, switches off after overcharging
- protection
Technical parameters:
Earth resistance measurement (Re)
Measurement range / resolution / accuracy (Re)
4Ω / 0.01Ω / ± (3% + 15)
40Ω / 0.1Ω / ± 0.1Ω / ± 0.1Ω / ± 0.1Ω / ± (3%/1Ω / 5) (3% + 5)
4kΩ / 0.01kΩ / ± (3% + 5)
40 kΩ / 0.1 kΩ / ± (3% + 5)
Measurement of soil resistivity (ρ)
in the ranges: 4Ω, 40kΩ, Ω, 404kΩ, Ω, 4Ω, max. 1000kΩm
Measurement accuracy (ρ) depending on the test result Re: ρ = 2 × π × L × Re
Measurement of interference signals
amplitude / resolution / measurement accuracy range (Ust)
1 to 50Vrms / 1V / ±>resolution /frequency / 1V / ±) measurement accuracy (Fst)
40 Hz to 500 Hz / 1 Hz / ± (1% + 2)
Other parameters:
- backlit multifunctional LCD display with dimensions: 125 × 37 mm
- test signal frequency and test signal frequency range: or 94H/2-Hz probes: 1m to 40m
- memory storage: up to 20 measurement sets
- Overload protection: 220V AC for 10s between terminals E-S, E-H
- insulation resistance between PCB circuits and casing: ≥ 50MΩ (1000V) 3540V / AC 50 / 60Hz for 5s, spark-free
- power supply: 8 x 1.5V AA alkaline batteries
- automatic shut-off on inactivity: yes, after 5 minutes
- low battery indication: yes, at ≤ 9.5V
0 °C to: operating temperature, 40°C max. 80% RH, n.m.v. ≤ 2000
- Storage conditions: temperature from -20 °C to +60 °C, humidity ≤ 75% RH
- Device dimensions: 210 x 175 x 90 mm
- Weight: 1.1 kg (including batteries)
- device colour: red and grey/
Packaging:
- UT572 device: 1 pc
- Green precision test lead, 5 m with alligator clip: 1 pc
- yellow precision test lead, 10m with alligator clip: 1 pc
- Red precision test lead, 20m with alligator clip: 1 precision alligator clip: 1-2 alligator test leads: 1-2 black clips: 1 pc
- red precision test lead, 40m with alligator clip: 1 pc
- standard test leads with crocodile clips: 2 pcs
- earth probe (probe) approx. 20 cm long: 4 pcs
- 1.5V AA alkaline battery: 8 pcs
- case: 1 pc
- user manual: 1 pc
Wholesale packaging:
- standard quantity per box: 2 pcs
- standard box dimensions: 30 x 347 mm (CBM)
- standard total box weight: 14kg
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT658 USB Tester
This product comes with a 3-year warranty. This tester uses an input and an output connector to measure not only the actual voltage and current drawn from the USB, but also calculates the total current from which it calculates the charging capacity. The tester is suitable for checking the capacity of power banks, mobile phone batteries, tablets and anything else that charges via this port. We can also measure the usage of a flash drive or external hard drive, which often exceeds the limits of USB 2.0. This tester has an independent power memory for 10 values, so you can recall the last value after disconnecting and reconnecting.
UT658 - Wireless USB Cable
UT658B - USB connector with 10 cm cable
Product specifications:
- memory: 10 values
- LCD display
Technical specifications:
- Input voltage range: 3 V: ---9
- Voltage monitoring accuracy: ± 1 %
- Current monitoring range: 0 A – 3 A
- Current monitoring accuracy: ± (1 % + 2)
- Current resolution: 0.01 A
- Energy: 0–9999 mAh
- Dimensions: 8 x 28 mm x 28 mm
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT682 UTP Cable Tester (RJ45)
This product comes with a 3-year warranty. The UNI-T UT682 wire tracing system consists of a transmitter and a receiver. It features functions such as telephone wire tracing, network cable tracing (RJ45/UTP), cable tracing, network cable testing, etc., and offers fast and accurate measurement. The UT682 is an ideal tool for personnel involved in the installation and maintenance of low-voltage systems, such as communication cables and integrated circuits.
FEATURES:
Product name: Wire Tracker
Power supply: 9V battery (NOT included)
Signal transmission mode: multi-frequency pulse
Telephone line short circuit test
Open circuit polarity test
√
Audio signal test range: ≥1000m
Video line distance: ≥100m
Low battery indicator (transmitter): √
Telephone line monitoring function
A. Connect the telephone line plug to the transmitter’s RJ11 interface;
B. Set the transmitter’s function selector switch to the ‘TEST’ position. The ‘Status’ line tracing indicator will light up, indicating that the transmitter is operating correctly;
C. Hold down the receiver’s “Press to Test” button and search for the target cable with the receiver’s probe.
D. During testing, gently press the “Switch” button to toggle between single and dual audio test modes.
Network line tracing function
A: Connect the network line with a crystal head to the transmitter’s RJ45 interface;
B. Set the transmitter’s function selector switch to the “TEST” position; the “Status” line tracing indicator will flash, indicating that the transmitter is functioning correctly;
C. Hold down the receiver’s ‘Press to Test’ button and search for the target cable with the receiver’s probe.
D. During testing, gently press the “Switch” button to toggle between single and dual audio test modes.
Power cable line tracing function (the power cable must not be live)
A. Connect the transmitter to the metal cable using crocodile clip adapter cables;
B. Set the transmitter’s function selector switch to the ‘TEST’ position; the ‘Status’ line tracing indicator will flash, indicating that the transmitter is functioning correctly;
C. Hold down the receiver’s “Press to Test” button and search for the target cable with the receiver’s probe.
D. During testing, gently press the “Switch” button to toggle between single and dual audio test modes.
ACCESSORIES:
1 x UNI-T UT682 transmitter
1 x UNI-T UT682 receiver
1 x RJ11 adapter cable
1 x RJ11 adapter cable
1 x Croco45 adapter cable
1 x RJ11 adapter cable
1 x canvas bag
1 x user manual in English
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT681L Cable Tester (RJ45, RJ11)
This product comes with a 3-year warranty. Product specifications and features:
- tests Ethernet cables and telephone lines
- equipped with an RJ45 interface for Ethernet cables and an RJ11 interface for testing Ethernet/unshielded cables
Shielded test
- visible LED indication
- automatically checks for open circuits, short circuits and cross-connections
- Can switch between fast and slow test modes
- Single-button operation
- Manual/automatic shut-off (after 10 minutes of inactivity)
- low battery indicator
- powered by a 9V battery
9V parameters:
- tests RJ45 / RJ11
- fast speed test: LED1-LED8, LED_G
- slow speed test mode: LED1-LED8, LED_G
- power supply: 9V battery
- storage temperature: -10 to 50 °C; operating temperature
--4 °C Humidity: 20–80% RH
- Storage humidity: 10–90% RH
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT681C Cable Tester (RJ45, RJ11, BNC)
This product comes with a 3-year warranty. Product specifications and features:
- tests Ethernet cables and telephone lines
- equipped with an RJ45 interface for Ethernet cables and an RJ11 interface for testing unshielded telephone/Ethernet lines
- shielded test
- visible LED indicator
- automatically checks for open circuits, short circuits and cross-connections
- can switch between fast and slow test modes
- single-button operation
- manual/automatic shut-off (after 10 minutes of inactivity)
- low battery indicator
- powered by a 9V battery
9V parameters:
- tests RJ45, RJ11, BNC - you must use the RJ45 to BNC adapter
- fast speed test mode: LED1-LED8, LED_G
- slow speed test mode: LED1-LED8, LED_G
- power supply: 9V battery
- storage temperature: 5/10˚ storage temperature:
-- storage temperature: 5/10˚ 0-40 ˚C
- Operating humidity: 20–80% RH
- Storage humidity: 10–90% RH
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT681 HDMI Cable Tester
This product comes with a 3-year warranty. Product specifications and features:
- tests HDMI/MINI-HDMI cables
- Fastline connection types: A to A, A to C and C to C
- checks for open circuits, short circuits and cross-short circuits via visible LED indicators
Visible cross-short indicators
- Can switch between scan and full display test modes
- single-button operation
- manual/automatic switch-off (after 10 minutes of inactivity)
- low battery indicator
- Power supplied by a built-in 9V battery
Technical/test parameters:/-
HDMI/MINI-HDMI
- scan test mode: LED1-LED19, LED_S
- Full display test mode: LED1-LED19, LED_S
- Power supply: 9V battery
- Storage temperature: -10 to 50 °C
- operating temperature: 0–40 °C
- Operating humidity: 0–40 °C
- Operating humidity: 10–90% RH
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT658B USB Tester
This product comes with a 3-year warranty. This tester uses an input and an output connector to measure not only the actual voltage and current drawn from the USB port, but also to calculate the total current, from which it calculates the charged capacity. The tester is suitable for checking the capacity of power banks, mobile phone batteries, tablets and anything else that charges via this port. We can also measure the usage of a flash drive or external hard drive, which often exceeds the limits of USB 2.0. This tester has an independent power memory for 10 values, so you can recall the last value after disconnecting and reconnecting.
UT658 - Wireless USB Cable
UT658B - USB connector with 10 cm cable
Product specifications:
- memory: 10 values
- LCD display
Technical specifications:
- Input voltage range: 3 V: ---9
- Voltage monitoring accuracy: ± 1 %
- Current monitoring range: 0 A – 3 A
- Current monitoring accuracy: ± (1 % + 2)
- Current resolution: 0.01 A
- Energy: 0–9999 mAh
- Dimensions: 8 x 28 mm x 28 mm
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT501A Insulation Resistance Tester
This product comes with a 3-year warranty. UT501A Insulation Resistance Tester.
The UT500 series electrical insulation testers are used to measure the insulation resistance of electrical equipment and household appliances during routine inspections. This is achieved by measuring the insulation resistance between electrical circuits or between circuits and earth (the equipment’s earth). The UT500 series can measure insulation resistance, AC voltage, low resistance, PI (polarisation index) and DAR (dielectric absorption). The individual units in the UT500 series differ from one another in their test voltage ranges (UT501A 100V to 1000V, UT501B 250V to 1000V, UT502A 500V to 2500V), maximum measured insulation resistance (UT501A 5GΩ to 5GΩ, UT502A 0MΩ to 20GΩ) and other parameters.
These testing and inspection devices ensure the correct operation of transformers, generators, high-voltage motors, power capacitors, power cables, surge arresters, circuit breakers, and electrical machinery and equipment. They are ideal devices for carrying out electrical maintenance and are manufactured in accordance with IEC 61010 and IEC 61557 standards.
UT501A product specifications:
- Insulation resistance measurement from 0 MΩ to 5.5 GΩ
- DC test voltage 100 V / 520 V / 500 V / 1000 V
- AC voltage measurement in the range from 30 to 750 V (50 / 60 Hz)
- Overload indication at >5.5 GΩ
- Backlit LCD display with a range of 1999
- Automatic range switching
- Secondary display for red light warning function
Power supply: 6 x 1.5V (AA) batteries
- Low battery indicator
- CAT III 600 V overvoltage protection
Technical specifications of the UT501A:
- Rated test voltage / insulation resistance measurement range / rated measurement current / internal resistance 1000V //>000V //> 100MΩ / 1.00mA to 1.10mA / 100kΩ
250V / 0.00MΩ to 5.5GΩ / 1.00mA to 1.10mA / 250kΩ
500V / 0.00MΩ to 5.5GΩ / 5.1.0mA / 5.1.0mA 500kΩ
1000V / 0.00MΩ to 5.5GΩ / 1.00mA to 1.10mA / 1MΩ
- open-circuit voltage tolerance: +10%
- test voltage short-circuit current: less than 1.8mA to 0.00mA, resistance measurement range at 0000mA
00. 99.9MΩ: ± (3% + 5) / 100MΩ to 5.5GΩ: ± (5% + 5)
- AC voltage measurement - range: 30 V to 750 V (50 / 60 Hz)
- resolution: 1V
- (display accuracy: 1V
- ± 2%/-: 3) 70.6 mm x 34 mm multifunction LCD, 1999-digit range
- Display backlight: option of white backlight or red backlight during warning
- automatic range switching: yes
- buzzer: yes, high voltage indication
- Automatic discharge of internal battery after measurement: yes (AA)
- low battery indicator: yes, when voltage drops below 7V
- weight: 0.5kg (including battery)
- product dimensions: 150 x 100 x 71mm
- product colour: red and grey
- factory calibration conditions: ambient temperature 23 °C, humidity ± 23 °C, ± 75% humidity
- recommended calibration: once a year; the calibration protocol must be ordered separately
- operating conditions: 0°C to +35°C / relative humidity 75% or less
- storage conditions: -20°C to +60°C / relative humidity 80% or less
- Altitude: max. 2000 m
Contents of individual package:
- UT501A unit: 1 pc
- test leads: 1 pair
- Alligator clips: 1 pair
- 1.5V AA battery (LR6): 6 pcs
- instructions: English, Czech, Slovak: 1 copy
Wholesale packaging:
- standard quantity per box: 20 pcs
- standard box dimensions: 500 x 380 x 330 mm
- total weight of the box: approx. 17.7 kg
Manufacturer:
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT682D Cable Tester
This product comes with a 3-year warranty. UT682D Wire Tracker
The UT682 Wire Tracker consists of a transmitter and a receiver and is capable of tracing Ethernet, telephone and power cables without stripping the insulation. The UT682 can troubleshoot Ethernet cables and is a recommended tool for troubleshooting communication cables and audio/video cables
Specifications:
Wire tracking features
Wire types: twisted pair telephone line
Telephone line tracing distance: ≥30/>000m of telephone lines for DC function, range: ±(5V~52V)
Distinguishes between telephone lines and LAN cables Distinguishes between plugs √
Transmitter output voltage: 8V DC with a new battery
Transmitter power supply: 9V battery
Receiver power supply: 9V battery
Maximum operating current of the receiver A/√ max. <40mA (AC, RMS) √
Transmitter input voltage protection: 60V DC
Operating environment:
Operating temperature: 0–40°C; Storage temperature: –10–50°C
Operating humidity: 20–75% RH; Storage humidity: 10–90% RH; Altitude: ≤2000 m
General features:
Product colour: Red and grey
Net product weight: Transmitter-150g, Receiver-130g
Product dimensions: Transmitter – 74mm x 68mm x 28mm, Receiver – 208mm x 3mm x 308mm> Accessories: 9V battery x 2
Standard individual packaging: English manual
Standard quantity per box: 20 pcs
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT343D Coating Thickness Tester
This product comes with a 3-year warranty. The UT343D coating thickness gauge can measure the thickness of coatings on ferrous and non-ferrous materials. This device is designed with a unique quick-test feature, allowing users to set a thickness range and use a 3-colour LED and an audio alarm to quickly determine whether the tested coating falls within the preset range, greatly increasing work efficiency.
The UT343 display rotates automatically. This CE-certified device can store up to 500 sets of data for further analysis via the included PC analysis software.
Applications:
It is widely used in manufacturing, metalworking, aerospace, marine engineering, rail transport, scientific research, quality control and other industries.
Specifications
Measurement range: 0–1250 µm
Accuracy: ±(3%H+1) µm
Resolution: 0.1 µm (0–99.9 µm); 1 µm (100–1250 µm)
Measurement method: Single/Continuous
Measurement mode: Max/Min/Avg
Metal type: ferrous/non-ferrous
Features
Display type: 2.0-inch TFT LCD (brightness) (243,200 pixels) control: √
Automatic screen rotation: √
Unit conversion: √
Audio alarm: √
LED alarm: √
PC analysis software: √
USB communication: √
Quick test mode: √
Automatic data group shutdown:
0 √
Low battery indicator: √
General features
Power: 3V battery (R03) x 2
Display: 48mm x 36mm
Product colour: red and grey
Net product weight: 175g.<br/x15mm.
63 mm. 41 mm
Standard accessories: micro USB interface cable, standard earpiece, batteries, cloth pouch
Standard individual packaging: gift box, manual
Standard quantity per box: 10 pcs.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT658DUAL USB Tester
This product comes with a 3-year warranty. The UT658DUAL USB Tester is the second generation of the UT658 series. It can test USB chargers, portable power banks, USB-A and USB-C cables, and other electronic chargers. The UT658DUAL measures output voltage, current, power, capacitance, internal resistance of the power supply, and the D+ and D- voltages of USB data cables. If the measured input voltage exceeds 24 V or the measured current exceeds the permitted current, the device automatically switches off and ‘OL’ appears on the screen. The warning symbol ‘LO’ appears when the input voltage is below 4 V. This range is designed to be accurate, reliable, stable and portable. They are great tools for applications such as production verification, technical testing and DIY.
Product specifications:
- designed to control USB-A and USB-C charging outputs
- the four-line display shows voltage, current output, delivered capacity in mAh and charging time simultaneously
0 hours, including the charging process (up to 100 mAh) recording of 10 sets of measurements
- supports QC protocols for fast charging
- max. input voltage: 24V
- Max. charging current via USB-A: 3A
- max. charging current via USB-C: 4A
Technical parameters:
- Input and output ports: USB-A + USB-C
- Input voltage measurement range: 4 ~ 24VDC, resolution 0.01 V
- Input current measurement range via USB-A, input resolution: 30.0 A
- Input current measurement range via USB-C input: 0.05 ~ 5A / DC, resolution 0.01 A
- Measurement range for capacity delivered to the connected battery: 0 ~ 99999 mAh, resolution 1 mAh
- Measurement range of energy supplied to the equivalent circuit Wh10/0-00000 ~ Wh of the connected battery: measurement: 1 ~ 480Ω
- USB data cable voltage measurement (D+, D-): 0 ~ 3.3 V
- Saving measurement records to data storage: 10 sets
- Maximum measurement recording time: 99h, 59min, 59sec; resolution 1s
- Fast charging (USB-A input): fast charging protocol up to QC 3.0
- fast charging (USB-C input): fast charging protocol up to QC 4.0
- product dimensions: 93 mm x 55 mm x 13 mm
- net product weight: 65.8 g product colour:
- white
Package contents:
- UT658DUAL tester
- user manual
Wholesale packaging:
- standard quantity per box: 60 pcs
- standard box dimensions: 280 mm x 220 mm x 225 mm gross box weight:
- 5 kg gross weight
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT683KIT cable tester is a smart cable detector comprising a transmitter and a receiver. The receiver can quickly and accurately locate the target cable. This kit can automatically identify open circuits, short circuits, polarity and other conditions to help you quickly identify cable faults. It is an ideal device for integrated connection, installation and maintenance of low-voltage electrical systems.
Product parameters:
- network cable monitoring
- telephone line monitoring
- electrical cable monitoring
- testing: RJ45 cable, RJ11 cable
-/>- flash ON function
-/>-V lamp OFF
-/>-V switch
- polarity indicator
- sensitivity setting
Technical specifications:
- power supply: 3.7 V / 1050 mAh rechargeable lithium battery
- signal mode: modulated signal (125 kHz carrier)
- (connection range)
- 300 m (visual mode)
- Switch monitoring range: ≥100 m (connected mode)
- Operating temperature: -10°C – 50°C
- operating humidity: 20–75% relative humidity, non-condensing
- operating altitude: 2,000 m
- Transmitter dimensions: 2 × 130 mm; Receiver dimensions: 197 mm × 48 mm × 34 mm
- Transmitter weight: approx. 95 g
- Receiver weight: approx. 127 g
- Operating time: transmitter > 8 hours, receiver > 5 hours
- Package contents: transmitter, receiver, USB charging cable, RJ1 adapter, RJ11 adapter, RJ1 to RJ45 adapter, RJ45 adapter cable, instructions, packaging
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. UT501B insulation resistance tester.
The UT500 series electrical insulation testers are used to measure the insulation resistance of electrical equipment and household appliances during routine inspections. This is achieved by measuring the insulation resistance between electrical circuits or between circuits and earth (the equipment’s earth). The UT500 series can measure insulation resistance, AC voltage, low resistance, PI (polarisation index) and DAR (dielectric absorption). The individual units in the UT500 series differ from one another in their test voltage ranges (UT501A 100V to 1000V, UT501B 250V to 1000V, UT502A 500V to 2500V), maximum measured insulation resistance (UT501A 5GΩ to 5GΩ, UT502A 0MΩ to 20GΩ) and other parameters.
These testing and inspection devices ensure the correct operation of transformers, generators, high-voltage motors, power capacitors, power cables, surge arresters, circuit breakers, and electrical machinery and equipment. They are ideal devices for carrying out electrical maintenance and are manufactured in accordance with IEC 61010 and IEC 61557 standards.
UT501B product specifications:
- insulation resistance measurement from 0 MΩ to 5.5 GΩ
- DC test voltage measurement 250V /
- Low resistance measurement from 0 to 200Ω
- AC voltage measurement in the range from 30 to 600V (50 / 60Hz)
- Overload indication at >5.5GΩ
- Backlit LCD display with automatic secondary display switching
- 199> voltage and start-up functions
- Red warning light
- Powered by 6 x 1.5 V (AA) batteries
- Low battery indicator
- CAT III 600 V overvoltage protection
Technical specifications of the UT501B:
- internal voltage measurement / insulation resistance / insulation resistance
250V / 0.00MΩ - 5.5GΩ / 1.00mA - 1.10mA / 250kΩ
500V / 0.00MΩ - 5.5GΩ / 1.00mA - 1.10mA / 500kΩ - 500kΩ - 0V0Ω /M500. / 1.00mA - 1.10mA / 1MΩ
- open-circuit voltage tolerance: +10%
- short-circuit current of test voltage: approx. 2mA
- insulation resistance measurement accuracy range: 0.00MΩ to 99.9MΩ: ± (3% + 5) / 100MΩ to 5.5GΩ: ± (5% + 5)
- Polarisation index measurement for a criterion value measurement duration of 10 minutes /⥥: 10 minutes PI /⥥ 1 minute 4 / best, 4 to 2 / good, 2.0 to 1.0 / warning, ≤ 1.0 / poor
- Dielectric absorption measurement for 60 sec / 30 sec
- DAR value / criterion: ≥ 1.4 / best, 1.25 / 1, ≤ / 1 / 1. poor
- low resistance measurement (circuit continuity) - range: 0.00Ω to 200Ω
- resolution: 0.01Ω
- Display reset for more accurate measurements: yes, ZERO button
- open-circuit voltage before measurement: approx. 5.0 V
- current during measurement: approx. 200mA
- Accuracy: ± (2% + 3)
- AC voltage measurement - range: 30 V to 600 V (50 / 60 Hz)
- resolution: 1 V
- Accuracy: ± (2% + 3)
- 60 mm multifunctional LCD display. 34 mm, range 1999
- Display backlight: option for white or red backlight during warning
- automatic range switching: yes
- buzzer: yes, high voltage indication
- Automatic discharge of internal capacitance after measurement: yes
- power supply: 6x alkaline (5V battery, low battery indicator)
- Voltage drops below 7V
- weight: 0.7kg (including battery)
- product dimensions: 150 x 100 x 71mm
- product colour: red and grey
- factory calibration conditions: ambient temperature 23°C ± 5°C, humidity 45% to 75%/year; calibration protocol recommended once a year. Ordered separately
- operating conditions: 0 °C to +40 °C / relative humidity 85% or less
- Storage conditions: -20 °C to +60 °C / relative humidity 90% or less
- Altitude: max. 2000 m
Contents of individual package:
- UT501B unit: 1 pc
- test leads: 1 pair
- Alligator clips: 1 pair
- 1.5 V AA battery (LR6): 6 pcs
- instructions: English, Czech, Slovak: 1 copy
Wholesale packaging:
- standard quantity per box: 20 pcs
- standard box dimensions: 500 x 380 x 330 mm
- total weight of the box: approx. 20.9 kg
Manufacturer:
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT07B-EU Socket Tester
This product comes with a 3-year warranty. The UNI-T UT07B-EU is a tester designed for simple checking of 230V / AC socket connections. Using three indicator LEDs, it signals the correct connection of all three supply wires and the functionality of the switch connection.
Product specifications:
Indication of seven socket connection statuses via three LEDs:
- OK, RCD test passed.
-- green wire - No. phase - brown or black wire.
- Neutral wire missing (reversed) - blue wire.
- Phase connected in reverse.
- Phase connected in reverse and earth missing.
Technical parameters:
- Operating voltage: 230V/AC:
- Operating frequency:>-/AC:
- 50Hz to 60Hz
- RCD function test: with a current of approx. 30 mA
- Product colour: red and grey
- Weight: 80.5 g
- Dimensions: 65 x 65 x 61 mm
Contents of individual pack:
- UT07B-EU tester (in blister pack): 1 pc
- instructions for use- 1 pc
:
- standard quantity per box: 48 pcs
- standard box dimensions: 430 x 330 x 365 mm
- standard box weight: 5.4 kg
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT673A is a portable tester for lead-acid car batteries, allowing you to analyse the condition of batteries with capacities ranging from 30 to 250 Ah without removing them. It is equipped with state-of-the-art technology that allows you to measure battery voltage, the car system’s charging currents, the battery’s internal resistance, starting currents, the battery’s remaining capacity as a percentage, and the battery’s remaining service life as a percentage. Before starting the test, you must select the battery type – standard lead-acid battery, flat AGM battery, spiral AGM battery, gel battery, EFB battery and standard battery – CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah. If the standard cannot be determined, the CCA standard is selected, for example 60Ah, cold cranking current 500A, and tested.
Product parameters:
- 12V lead-acid car battery tester for various models
- allows testing of 12V / 24V systems with vehicle charging resolution
- x1 64-pixel display
- Coloured LED indicating the test result
- Test mode settings: Battery test, Start-up test, Charge test, Results display, System settings, Details
- CE, FCC, RoHS certified
Technical parameters:
- For testing 12V lead-acid batteries: - Standard lead-acid batteries, standard GM batteries: battery, AGM spiral battery, GEL battery, EFB battery
- Measurement standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah
- Tested battery capacity: 3 to 250Ah
- For testing 12V/24V charging systems: yes, including alternator/12V testing for 2V/12V starting
- Systems: yes
- Power supply: from the battery under test
- Voltage display: 7.00V to 16.00V (battery test)
- Voltage display: 7.00V to 30.00V (start/charge test)
- high voltage protection: yes
- reverse polarity protection
- reverse polarity indication
- yes
- battery status display: yes
- battery life display: yes
- battery capacity display: yes
- battery internal resistance display: yes
- language selection: yes (Chinese/English)
- Operating temperature: -20 °C to +50 °C
- Net product dimensions: 2/6 x 2 x 2 g
- 142 mm
- Product colour: red and grey
Contents of individual pack:
- UT673A device: 1 pc
- Velcro strap: 1 pc
- user manual: 1 pc
MANUFACTURER
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT675A is a portable tester for automotive lead-acid batteries, allowing you to analyse the condition of batteries with capacities ranging from 30 to 250Ah without removing them. It is equipped with state-of-the-art technology that allows you to measure battery voltage, the car system’s charging currents, the battery’s internal resistance, starting currents, the battery’s remaining capacity as a percentage, and the battery’s remaining service life as a percentage. Before starting the test, you must select the battery type – standard lead-acid battery, AGM flat battery, AGM spiral battery, gel battery, EFB battery and standard battery – CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah. If the standard cannot be determined, the CCA standard is selected, for example 60Ah, cold cranking current 500A, and tested.
Product parameters:
- 12V lead-acid car battery tester for various models
- allows testing of 12V to 24V charging systems with an LCD screen
- 128 x 64 pixels
- Test mode settings: battery test, start-up test, charge test, results display, results printout, system settings
- System time setting
- Built-in printer for printing values in real time
- Data transfer via USB interface
- CE, FCC, RoHS certification
:
- Technical test parameters for 12V lead-acid batteries: yes
- Battery types tested: standard lead-acid battery, AGM flat battery, AGM spiral battery, GEL battery, EFB battery
- Measurement standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah
- Battery capacity tested: 3 to 24V/25V-Ah for charging system testing: yes, including alternator diode test
- for testing 12V / 24V starting systems: yes
- System time setting: yes, (year, month, day, hour, minute)
- Power supply: from the battery under test
- Voltage display: 7.00 V to 16.00 V
- 0 V (battery test)
- 0 V to 30.00 V (start-up/charging test)
- high voltage protection: yes
- reverse polarity protection: yes
- Faulty contact information: yes
- battery status display: yes
- battery life display: yes
- Battery capacity display: yes
- Internal battery selection display: yes (English)
- Operating temperature: -20 °C to +50 °C
- Transfer of the last data set to a computer: yes, after downloading the software to the computer
- Net product weight: 413 g
- Product dimensions: 95 x 47 x 183 mm
- Product colour: red and grey
Contents of individual packaging
:
- UT675A device: 1 pc
- USB interface cable: 1 pc
- printing paper: 3 pcs
- Cloth bag: 1 pc
- User manual: 1
MANUFACTURER: UNI-TREND
