In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UNI-T 2117R True RMS 1000A clamp meter is an excellent choice for measuring alternating current. It features a voltage measurement range of 1000V AC/DC, a resistance measurement range of 60MΩ and a bright backlight. Dual NCV allows users to detect live voltage without contact. The multimeter is CE/UKCA approved and has a safety rating of CAT II 1000V / CAT III 600V with 1000V overload protection.
Product specifications:
- True RMS
- 1000A AC current measurement
- Large LCD voltage display
-/DC
-/100V Backlight
- AC frequency measurement: 20 Hz–10 kHz
- Overload protection 1000V
- NCV (dual high/low mode)
Technical parameters:
- AC current measurement (A): 1000 A ±() AC frequency (+-4)
- AC voltage (V): 1000 V ±(1.0%+2)
- DC voltage measurement (V): 1000 V ±(0.7%+3)
- Resistance (Ω): 60 MΩ > ±(2)
Capacitance (0.7%+2)
6mF ±(4%+5)
- Display range: 6000
- Jaw opening: 33 mm
- True RMS
- Auto range
- Diode test
- NCV
- Data log
- LCD backlight
- Auto-off: approx. 15 minutes
- Low battery indication ≤2.5V approx.
- Input protection
- Power supply: 2 x AAA 1.5V (LR03)
- Product weight: 210 g
- Dimensions: 204 x 63 x 38 mm
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT333 Mini Temperature and Humidity Meter
This product comes with a 3-year warranty. UNI-T UT333 Mini Temperature and Humidity Meter
SPECIFICATIONS
Temperature range -10°C to 60°C
Temperature accuracy: ±1°C
Temperature resolution 0.1°C
Humidity range 0–100% RH
Humidity accuracy ±5% RH
Humidity resolution 0.1% RH
Sampling rate 1/s
FEATURES
Data logging
Automatic battery shut-off
MAX indication/Disabled
Auto power off
Mode
MIN mode
LCD backlight
On/Off
Overload Indication
°C/°F unit selection
GENERAL FEATURES
Power 1.5V Battery (AAA*3)
LCD size 32x26mm
Product dimensions
Weight
Dimensions 155x50x28mm
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T LM600 Distance and Speed Meter
This product comes with a 3-year warranty. The LM series laser rangefinder can accurately measure distance, height and angle. The speed measurement function uses a low-power pulsed laser, which is harmless to the human eye. The LM600 has a built-in battery, 7x magnification, a maximum measurable distance of 550m (600yd) and a height of 230m (250yd). These rangefinders are suitable for various inspections, construction, navigation, golf, hunting, etc.
Technical parameters:
Distance range: 4.572 ~ 548.64m (5 ~ 600yd)
Accuracy: ± 0.9144m, ±2%<br/0.9144m. 7x
Lens size: 25mm
Height: 228.6m (250yd)
Elevation deviation: ± 0.45m (0.5yd)
Speed range: 0–300 km/h
Angle: ± 45°
Angle deviation 3.7V 1500mAh Li-ion battery
Weight: 230g
Dimensions 114 mm x 76 mm x 48 mm
Standard accessories: Carrying case, hanging cable, USB cable
Product parameters:
Measures heart rate at a safe distance from the body.
LCD display
Auto power off
Standard accessories Carrying case, lanyard, USB cable
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T A37 CO₂ Meter This product comes with a 3-year warranty. The A37 air quality meter can monitor the concentration of carbon dioxide in the ambient air. Carbon dioxide (CO2) is a natural gas produced in large quantities by human activity and is one of the many greenhouse gases in our atmosphere. CO2 usually occurs in the air at a concentration of just 0.0407% by volume = 407ppm. If you breathe in a higher concentration of CO2, you may be at risk of carbon dioxide poisoning. Symptoms of carbon dioxide poisoning include headaches, irregular heartbeat, nausea, loss of consciousness or even death.
The A37 monitors carbon dioxide levels, temperature and relative humidity. This device can be widely used in homes, offices, vehicles, laboratories, hotels, schools, factories, conference rooms, airports, hospitals, restaurants, shopping centres and many other public places. The CO₂ measurement range is from 400 ppm (0.04%) to 5000 ppm (0.5%). The device features automatic CO₂ calibration and then measures the CO₂ value once every 3 seconds, with the option to set the system time and date. Then, by briefly pressing the MODE button, you can display the held data (HOLD), or the maximum and minimum values (MAX and MIN), or the average values (AWG), or the average occupational CO₂ exposure over an 8-hour working day or a 40-hour working week (TWA function). ), or an acceptable limit for short-term CO2 exposure (time-weighted average), usually 15 minutes (STEL function). CO2 values are also indicated by six levels of emoticons.The device contains a rechargeable Li-ion battery, which you can charge using the included USB/micro USB cable from a 5V/1A power source, such as a phone charger.
Product specifications:
- carbon dioxide concentration measuring device based on the CO2 measurement method. NDIR (non-dispersive infrared) CO2 sensor principle- CO2 value updated every 3 seconds- Audible and visual alarm if the CO2 concentration exceeds 1,000 ppm- Measurement of temperature and relative humidity- Built-in backlit LCD display 42 x 65 mm- automatic shut-off- 65 mm rechargeable Li-ion battery, 3.7 V DC- charges via the included micro USB/USB cable
Technical specifications:
Measurement accuracy:CO2 measurement range / Resolution / Measurement accuracy400 ppm / ± 500 ppm / ± 500 ppm / 50 ppm in the range of 400 ppm to 2000 ppm
Temperature measurement range / Resolution / Measurement accuracy -10.0 °C ~ 50.0 °C / 0.1 °C / typically ± 1 °C
Humidity measurement range / resolution / measurement accuracy % 0.0 °C ~ 99% RH / 1% RH / typically ± 5% RH (10% RH ~ 90% RH) at 25 °C
Other parameters:
- display: backlit LCD, dimensions 42 x 65 mm- Automatic and manual CO₂ calibration: - 1 CO₂ calibration interval: 3 sec- Built-in rechargeable battery: 3.7V DC Li-ion- Charging: via the included micro USB/USB cable- Product dimensions: 75 x 55 x 130 mm- net product weight: 195 g- product colour: white and grey>
>
> C02 A37: 1 pc- USB cable: 1 pc- blister pack: 1 pc- protective cap: 1 pc- User manual: 1 pc
Package contents for wholesale customers:
- Standard quantity per cardboard box:
- 5 pcs. 140 mm- Total weight of the box: 2.35 kg
MANUFACTURER: UNI-TRENDhttps://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT333S Mini Thermometer and Hygrometer
This product comes with a 3-year warranty. The UT333S is a precise, safe and reliable digital thermometer with a hygrometer and compact dimensions. The display is split and shows the temperature and humidity readings simultaneously, facilitating measurement in various conditions and environments. It is widely used in grain storage, transport, archives, materials processing, forestry, animal husbandry, healthcare, educational institutions, the public sector and households.
Product specifications:
- Accurate digital thermometer and hygrometer in a single device
- Split digital display, flexible coiled cable
- 1-second sampling frequency, wide range of applications, compact size
Technical specifications:
Temperature measurement: °F/> Units of measurement: °C
Measuring range °C: -10 to 60
Measuring range °F: 14 to 140
Resolution: 0.1 °C / 0.2 °F
Measurement deviation: ± 1.0 °C / 2.0 °F
Measurement range:
0.0 °F
Measurement range:
0.0 °C humidity
Resolution: 0.1% relative humidity
Measurement deviation: ± 5%
Other functions:
Min. and max. values
Data hold
Overload indication
Display backlight
Low battery warning
Auto-off when idle
Display dimensions: 32 x 35 mm
Dimensions: 110 x 53 x 26 mm
Power: AAA
Battery life: 3 x AAA
1 m
Operating temperature: 0 to 40°C
Altitude: 2000 m
Pollution class: 2
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT309E PRO Infrared Thermometer
The UT309E professional non-contact infrared thermometer can quickly and accurately determine surface temperatures ranging from -35 °C to +850 °C by measuring the infrared energy radiated by the target surface. For easier and more intuitive targeting of the device onto the target surface, a dual-wavelength rotating laser is built in, which indicates correct targeting of the thermometer. The distance-to-spot ratio is 20:1 with this instrument. This thermometer also features IP65 protection against water and dust and can withstand a drop of up to 3 metres. It is possible to preset the emissivity of the measured surface within the range of 0.1 to 1.0. The display of preset functions and measured values is provided by a clear, high-contrast EBTN colour display, whilst limit values are indicated by LEDs. You can set the system time and schedule repeated measurements in the future with a maximum interval of up to 96 hours between two measurements, and store up to 99 measured values in memory. The measurement time is also stored for each stored value. For these measurements, you will use the built-in standard socket for mounting on a tripod. The temperature measurement time is up to 250 ms in 95% of cases. It is possible to set minimum and maximum value limits, and measurements outside this range are indicated by an audible and visual signal. It is possible to display minimum, maximum and average temperatures, as well as deviations from the average (MIN, MAX, AVG, DIF). The thermometer switches off automatically to reduce power consumption if not used for 8 seconds. This automatic switch-off can be disabled.
Product specifications:
- infrared thermometer for non-contact measurement of surface temperatures
- temperature range: -35°C to +850°C, switchable to °F
- Laser-measured surface area ratio delimited by a circular distance indicator - Surface area indication at +850°C; the diameter of the measured surface is 30:1 with this instrument
- 32 x 32 mm high-contrast colour EBTN display
- LED indication of limit values
- Accurate system time, programming of temperature measurement intervals
- memory for 99 measurement sets
- Tripod mounting hole
Technical specifications
range: -35℃ to +850℃ (-32℉ to 1562℉)
- temperature measurement accuracy ≥0℃: ± 1.8℃ or ± 1.8% of the reading, whichever is greater
- Temperature measurement accuracy <0°C / ± ℃: ± ℃ of the reading, whichever is greater
- Temperature measurement accuracy ≥32℉: ± 3.6℉ or ± 1.8% of the reading, whichever is greater
- temperature measurement accuracy <32℉: ± (3.6℉ + 0.1℉ / ℉, spectral measurement response, whichever is greater)
- 14μm
- response time in 95% of cases: 250 ms
- the ratio of distance to the diameter of the measured surface is 20 : 1 with this instrument
- Circular laser measurement area delimitation: yes
- Class 2 rotating dual laser: output wavelength 630 nm, power 630 nm ≤1 mW
- display: high-contrast EBTN with backlight, measuring 32 x 32 mm
- Temperature limits indicated by LED
- Setting of the emissivity of the measured surface in the range from 0.1 to 1.0
- Measurement hold for processes requiring long-term temperature monitoring, temperature monitoring memory
time interval for temperature programming
99 measurement sets
- automatic switch-off when inactive
- power supply: 9V battery (1604A)
- battery life: continuous temperature measurement ≥16 hours
- low battery indicator: yes
- drop test from a height: 3 m
- Indicator)
- MAX / MIN / AVG / DIF value hold
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Operating humidity: <90% RH (non-condensing)
- Storage temperature: -20℉ to (-60℃) 140℉)
- Product colour: red and grey
- Net product weight: 292 g
- Product dimensions: 189 x 118 x 55 mm
Package contents:
- UT309E PRO thermometer: 1 pc: battery cover
- 1 pc
- 1 blister pack
- manual: 1 pc
Packaging for wholesale customers:
- standard quantity per box: 10 pcs
- standard box dimensions: 475 x 335 x 325 mm
- total box weight: 5.8 kg
>
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The UNI-T UT261A phase sequence tester is designed to check the phase sequence and direction of rotation in three-phase motors. It is an essential tool for electricians and technicians, used in switchboards and industrial installations where the motor’s direction of rotation must be checked with precision.
After connecting the test leads to the L1, L2, L3 terminals of the unit and to the motor leads, the LCD display quickly indicates the direction of rotation: clockwise or anti-clockwise.
Key features
Checks the phase sequence and direction of rotation of three-phase motors
3 input terminals for connecting the phases
Measurement category CAT III 600V – safe use in switchboards
Battery-free operation, inductive power supply from the circuit under test
Clear, easy-to-read LCD display
Technical specifications
Measuring voltage: 90 – 600V AC
Frequency: 15 – 400 Hz
Measuring current per phase: up to 1 mA
Standards: IEC61010 / EN61010, IEC61557-7
Dimensions: 123 x 71 x 29 mm
Weight: 160 g
Operating temperature: 0°C – 40°C
Storage temperature: 0°C – 50°C
Maximum altitude: 2000 m
Relative humidity: ≤95%
Pollution class: 2
Protection rating: IP40
Package contents
UNI-T UT261A phase sequence tester
3 × CAT III, 600V test leads
3 × extension leads with alligator clips
User manual (English)
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UT219PV Professional AC/DC clamp meter specially designed for high-voltage photovoltaic environments. It offers exceptional accuracy and performance with a wide range of features. With automatic range selection and a clear display capable of showing up to 9999 digits, this clamp multimeter enables precise measurements of AC/DC voltage, current, low-frequency filtered voltage/current, inrush current, peak current, DC power, resistance, circuit continuity, diodes, capacitance and temperature. Its versatility extends beyond photovoltaic applications, as it can also be used in other high-voltage devices, such as energy storage systems, uninterruptible power supplies (UPS) and large motors. DC
- Current measurement: AC / DC 1000A
- DC power supply: 2500 kVA
- External clamp sensor: UT-CS09D (AC 3000 A)
- Solar panel polarity indication: when <-10 DCV, audible and visual alarm
- AC/LP pass filter
- Bluetooth-F pass filter
voltage/current.
- Measurement of alternating start-up current and peak value
- Automatic backlight and auto-off
- Certificates: CE (EMC, LVD), cETLus, RoHS
- Safety category: CAT III 1500V / CAT IV 600V
- Protection rating: IP6/Technical
Parameters:
- AC current (A): 999.9 A 40Hz–100Hz ±(2.0%+5), 100Hz–1000Hz ±(2.5%+5)
- DC current (A): 999.9 A ±(2.0%+5):/AC voltage (2.0%>-5)
- DC voltage (V): 999.9 V / 2500 V ±(1.0%+5)
- DC voltage (mV): 999.9 mV ±(1.0%+5)
V (with L.0%+5)
- AC voltage ±(2.0%+9)
- AC current (with LPF): 999.9 A ±(2.5%+9)
- Flexible clamp AC current sensor (with LPF): 30.00 A / 300.0 A / 3000 A ±(4.0%+9)
- 0.00 A / 300.0 A / 3000 A ±(4.0%+9)
-3p. 300.0 A / 3000 A ±(3.0%+5)
- DC power: 999.9 kVA / 2500 kVA ±(1.0%+5)
- Frequency: 50 Hz – 999.9 kHz ±(0.5%+5)
- Resistance (0.5%+5)
-999 Ω. 99.99 kΩ ±(1.0%+3)
- Capacitance: 100.0 μF / 1000 μF ±(1.0%+5)
- temperature: -40°C – 4000°C ±(1.0%+30)
- True RMS
- max. display: 9999
- LCD display: dual display (V+A)
- Jaws (max. conductor diameter) 35 mm
- Diode test
- Solar panel polarity indication: at <-10 V DC, audible and visual alarm
- high voltage alarm
- HOLD range exceeded indicator
-/AUTO
- current
- PEAK
- Bluetooth BT 5.0 app
- automatic backlight
- low battery indicator √
- flexible clamp compatible with UT-CS09D (optional)
- protection rating: IP65
- Power supply: 1.5V AA battery × 5 mm × 5 mm × 2 mm
Accessories:
- test probe
- temperature probe
- battery
manufactured by UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT210D Clamp Meter
This product comes with a 3-year warranty. UT210D Clamp Meter
The UT210 series mini clamp meters are designed to perform well in confined spaces. They are essential tools for the maintenance of mechanical and electrical equipment, the installation of household appliances and electrical work.
1. NCV
2. Ergonomic and lightweight
3. Automatic range, sampling rate of 2–3 times per second
4. True RMS
5. ZERO mode
6. LCD backlight, data hold
7. Auto power off, low battery indicator
Specifications: Range
AC current (A): 200A ±(2.5%+8)
DC current (A): 200A ±(2%+3)
AC voltage (V): 600V ±(1%+3)
DC voltage (V/>60)
±(0.7%+3)
Resistance (Ω): 20MΩ ±(1%+2)
Frequency (Hz): 60kHz ±(0.1%+4)
Capacitance (F): 20mF ±(4%+5)
Temperature:
±0°C ±0%+4)
-40~1832℉ ±(1.5%+5)
Features:
Display count: 2000
Continuity buzzer √
Automatic range √
Jaw opening />170 mm
17 mm
General features:
Power: 1.5V battery (R03) x 2
Display: 39.3 mm x 26.5 mm
Product colour: red and grey
Net product weight: 170g
Product dimensions: 175mm x 3.5mm x 3.5mm x 3.5mm Accessories: batteries, test leads, spot contact temperature probe
Standard individual packaging: gift box, English manual, carrying case
Standard quantity per box: 40 pcs
www.uni-trend.com
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT196 True RMS solar multimeter from UNI-T is a professional-grade product designed for professionals who install or maintain photovoltaic or wind power plants. The device’s design allows it to operate in harsh outdoor environments – it has IP65 protection and can withstand a drop from a height of 2 m. This multimeter measures DC voltage up to 1700 V and AC voltage (true RMS) up to 1500 V at a frequency range of 45 to 1000 Hz. With the optional UT-CS09D Flex current loop, it allows non-contact measurement of AC currents from 1.5 to 3000 A, even in confined spaces. In addition, the UT196 measures frequency, resistance, capacitance, semiconductor transitions and electrical circuit continuity.
The low-pass function allows you to filter out RF interference generated by the inverter. The low-impedance mode can help with troubleshooting sensitive circuits, as well as circuits that may contain stray voltages. A built-in torch, a bright backlight, and audible and visual alarms allow users to complete their work safely and efficiently, even in dark and noisy environments.
The UT196 solar digital multimeter is designed with overload protection of 1700V DC, 1500Vrms AC and tested for safe use in a CAT III 1000V, CAT IV, UK and CA600V, UK and CA 600Vrms certified environment. cETLus.
Product specifications:
- Multifunctional multimeter designed for use in both outdoor and indoor photovoltaic and wind power installations
- measurement of AC/DC voltage, resistance, capacitance, frequency, diodes, circuit continuity, with external current loop and AC current
- LCD display
-, backlit maximum value
-- display: ± 6000, values are updated 2 to 3 times per second
- analogue bar graph: yes, 31 segments, measurement rate of 30 times per second
- range switching: automatic / manual
- automatic AC/DC voltage detection: yes
- non-contact electromagnetic field measurement (NCV): yes
- diode testing (semiconductor junctions): yes, open-circuit voltage approx. 3V
- electrical circuit continuity test: yes, the circuit is considered closed when R ≤ 10Ω, then the buzzer emits a beep
- built-in low-pass filter (LPF): yes, when the LPF is activated, interfering voltages above 1.2 kHz are attenuated by ≥ -3 dB/0>Hz relative to the measured attenuationHz. yes
- Peak Hold: yes
- Data Hold: yes
- Max/Min mode: yes
- Power supply: 9V battery / 6F22,
- Low battery indication: yes, when voltage drops below <7.5V, - automatic switch-off during inactivity
-1
- minutes
- Built-in torch: yes
- audible and visual indicator: yes
Technical parameters:
DC voltage measurement (V): Range / Resolution / Accuracy
600.0 mV / 0.1 mV / ±(0.5%/1 V/5.0)
±(0.2%+5)
60.00 V / 0.01 V / ±(0.2% + 5)
600.0 V / 0.1 V / ±(0.2% + 5)
1700V / 1V / ±(0.2%+5)
The input range is approximately mV/DC. 1GΩ.
AC voltage measurement (V): Range / Resolution / Accuracy
600.0 mV / 0.1 mV / 45 Hz to 500 Hz: ± (0.8%+3); 500 Hz to 1 kHz: ± (1.8%+3)
6.000V / 0.001V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
60.00 V / 0.01 V / 45 Hz to 500 Hz: ± (0.8% + 3); 500 Hz to 1 kHz: ± (1.8% + 3)
600.0V / 0.1V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
1500 V / 1 V / 45 Hz to 500 Hz: ± (0.8% + 3); 500 Hz to 1 kHz: ± (1.8% + 3)
Input impedance in the mV/AC range is approx. 10MΩ.
Automatic AC/DC voltage measurement: automatic range / Resolution / Accuracy
0V to 600.0V / 0.1V / DC to 500Hz: ± (2.0%+3); 500 Hz to 1 kHz: ± (4.0%+3)
With automatic range selection, LPF, Peak Hold selection is not possible; the input impedance is 2 MΩ
Resistance measurement: range / resolution / accuracy
600.0Ω / 0.10Ω / ±20.10Ω / ±20.10Ω 1Ω / ± (0.8%+2)
60.00 kΩ / 10 Ω / ± (0.8% + 2)
600.0 kΩ / 100 Ω / ± (0.8% + 2)
6,000 MΩ / 1 kΩ / ± (1.2%/+6 Ω)<0br/>+3 Ω. (2.5%+5)
Capacitance measurement: Range / Resolution / Accuracy
60.00 nF / 0.01 nF / in REL mode: ± (3%+10)
600.0 nF / 0.1 nF / ± (1.9% > +5.00 μF / 0.00 μF / 0.00 μF / 5.00 μF) ± (1.9% + 5)
60.00 μF / 0.01 μF / ± (1.9% + 5)
600.0μF / 0.1μF / ± (1.9%+5)
6,000 mF / 0.001 mF / ± (5% > +5)
0.001 mF / 0.001 mF / ± (5% >+5) ± (5%+5)
Measurement of AC currents with a UT-CS09D Flex current loop: Range / Resolution / Accuracy
30.00A / 0.01A / ± (0.8%+8)
300.0A / 0.1A /+300.0A / 0.1A /+0. ± (0.8%+8)
Frequency measurement: Range / Resolution / Accuracy
60.00 Hz to 1,000 MHz / 0.1 Hz to 0.001 MHz / ± (0.08% +4)
Other operating parameters: -0.001 MHz 40°C (32°F – 104°F)
- Storage temperature: -10°C to 50°C (14°F to 122°F)
- relative humidity: ≤75% RH (0°C - 30°C), ≤50% RH (30°C) operating altitude -
≤2000m
- EMC immunity: in accordance with EN61326-1: 2013, EN61326-2-2: 2013
- Power supply: 9V battery / 6F22
- External dimensions: 195 x 95 x 58 mm
- Weight: 4–85 g
- Drop test: 2m
- Certification: CE, UKCA, cETLus (CAT III 1000V, CAT IV 600V)
- Complies with standards: EN61010-1, EN61010-2-033, EN/IEC 61010-031 :-Contents of individual packaging :-/>
UT196 Solar PRO multimeter: 1 pc
- test leads: 1 pair
- 9V/6F22 battery: 1 pc
- user manual: 1 pc
Manufacturer:
UNI-TREND
-
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. UNI-T UT18E tester. The UT18 series tester is designed to test AC/DC voltage (up to 1000V), three-phase voltage, phase sequence, continuity and much more. This series is CAT IV 600V rated and meets the IP65 protection standard. The voltage tester is designed to make life easier for electricians, technicians and other professionals working with electricity in all environments.
It is equipped with several useful functions for voltage identification. It has an automatic mode that detects AC or DC voltage and signals the presence of voltage via an audible and visual warning.
Product specifications:
- 8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 400V, 1/900V, 1/900V
sequence test
- automatic polarity test
- RCD function - residual current device test
- automatic shut-off
- Frequency measurement
- low impedance measurement
- Simultaneous LED and LCD display
- Audible alarm
- built-in LED torch
- CAT III 1000V / CAT III 10 600V
Technical specifications:
- voltage (AC/DC)
6V ±(1.5% + 1)
12V ±(1.5% + 2)
24V ±(1.5% + 2)
50V ±(1.5% + 1)
50V ±(1.5% + 4)
230V ±(1.5% + 5)
400V ±(1.5% + 5)
690V ±(1.5% + 5)
1000V ±(1.5% + 5)
phase rotation test 1.5% + 5)
-0 V AC, ~ 4–0 V AC 50 Hz–60 Hz
- continuity test
- audible and visual LED indication
- residual current device test 230V (50-400Hz)
- polarity detection
- automatic range: full range
- 1100V surge protection
- automatic standby current<br/1:0; full range
- Low battery indication: approx. 2.4 V
- LCD display (voltage): 6V–1000V
- LCD display (frequency): 40Hz–400Hz ±(3%+5)
- IP65 protection
- CAT III 1000V; CAT IV 600V
- Product colour: red, black
- Power supply: 2 x 1.5V AAA LR03 batteries
- Product weight (including batteries): 277g
- product dimensions: 272 x 85 x 31 mm
- Standard quantity per cardboard box: standard dimensions: 4 pcs. 380 x 365 mm
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. UNI-T LM60i mini laser distance meter. This mini distance meter is a small, compact and unique tool, not only for DIY enthusiasts but also for professionals, helping you to quickly measure any area. It is smaller in size and lighter in weight. It is characterised by high accuracy, excellent design and many functions. The hard metal casing provides the user with an excellent grip and can be used in harsher environments. It is widely used in exterior decoration, engineering projects, etc.
Product specifications:
- compact size and portable design
- multiple measurement modes
- high accuracy
- custom calibration
- LCD backlight
- unit switch
- CE certification
Rohn
>
Specifications:
- measurement range: 0.05 to 60 m
- measurement accuracy: ± (2 mm + 5 × 10⁻⁵ D)
- continuous measurement: yes
- area and volume measurement: yes
- circumference measurement: yes
- Pythagoras
- max. yes
- unit switch: m, in, ft
- laser type: class II, 630–670 nm, <1 mW
- automatic laser shut-off: 20s (one measurement)
- automatic shut-off: approx. 150 s
- battery life: up to 8,000 measurements
- storage temperature: -20 °C to 60 °C
- operating temperature: 0 to 40 °C
- Storage humidity: 20 to 80 %RH
- Power supply: 3.7 V, 370 mAh/6.5 x 3.7 V, battery dimensions 370 mAh/6. x 19 mm
- Product weight: 75 g
Accessories: Mini laser rangefinder, Type-C cable, manual, wrist strap.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UNI-T A56 BT Bluetooth temperature and humidity data logger utilises a high-precision digital temperature and humidity sensor module and a low-power microprocessor. It features high accuracy, large memory capacity, automatic logging, time display, LED alarm with sound and light, and logging at very low temperatures, etc. At the same time, it supports editing logs, viewing data and exporting PDF reports via the mobile app or PC software. The data logger meets the requirements for high-precision measurement and long-term recording of temperature and humidity under various conditions and is widely used in food processing, cold chain transport, storage, etc. ±3 °C
- Bluetooth app
- PC analysis software
- Audible and visual alarm
- IP54 protection
- 64,000 data storage groups
- Magnetic design for wall mounting
Technical specifications:
- Temperature measurement range °C: 8–4 °C Humidity range: 0% to 100% RH
Temperature:
0 °C < t ≤ 60 °C (±0.3 °C)
-40 °C ≤ t ≤ 0 °C (±0.5 °C)
60 °C ＜ ≤ 8 °C (±0.5 °C)
Humidity:
0% ≤ RH ≤ 90% / ±2.5% RH (25°C)
90% < RH ≤ 100% / ±3.5% RH (25°C)
-6 data storage groups: -0/4
-6 measurement: MAX, MIN, AVG
- LED indicator
- Backlight
- Alarm
- PC software
- Mobile app: yes (TempLink)
- Low battery indicator
- Recording interval: 10 s to 24 hours (set via PC/app trigger button) / Scheduled recording trigger method:
- Timer: 15 s ± 2 s (set via PC/app)
- USB port: USB Type-C
- Power supply: USB
- Mounting: wall-mounted or magnetic
- Operating temperature and humidity: -40°C to +85°C, ≤99% RH
- EMC certification: EN-161302:2021, IP54 protection
- Power supply: 3.6V 2700mAh Li-SOCl2 battery (ER14505)
- Dimensions: 104 × 62 × 25 mm
- Weight approx. 100 g
- Accessories: instructions, screws + wall plugs, USB cable
- standard quantity per box: 20 pcs
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT372D 2-in-1 tachometer is a reliable and safe device that combines contact and non-contact measurement modes. It is mainly used for measuring revolutions per minute (RPM), frequency, speed and surface length in the fields of motors, fans, automotive, paper manufacturing, etc.
Product specifications:
- contact and non-contact measurement
- measurement of rotational speed, frequency, count, surface speed and length
- AVG-H > MIN/MIN > MAX. Rotating LCD display with backlight
- unit conversion
- a Bluetooth app that facilitates data viewing, graph export and other operations on a smartphone
- automatic shut-off
- data storage (10 data sets)
- two measurement buttons
Technical specifications:
-/contact:
-/contact: measurement:
- rotational speed (rpm): 1–99,999
- frequency (Hz): 1–1,666
- count (REV): 1–99,999
- target distance: 50–500 mm
Contact measurement:
-9 Rotational speed (r/min):
- 9 (Hz): 1–333
- surface speed:
0.1 m/min
0.1–1.999 m/min
0.4–6,550 ft/min
4–78,700 in/min
6" wheel
0525-1.. m/min
0.5–5,000 ft/min
6–60,000 rpm
- length 0–99,999 (m/ft/in)
- accuracy ±0.02% ±1 digit
- measurement modes: contact speed/contact speed/contact frequency/measurement speed/contact frequency/surface frequency/surface area unit: m/min, ft/min, in/min, m, ft, in
- statistical measurement: Max/Min/last reading/average
- data storage: 10 groups
- Operating temperature/humidity: 0 °C to 50 °C, ≤80% RH
- Storage temperature: -20 °C ≤ 8% RH; at a height of 1 m
- automatic shut-off after approximately 15 minutes of inactivity
- Product colour: red and grey
- Product weight: 181 g (without batteries)
- Product dimensions: 176 × 63 × 38 mm
- Power supply: 3 x AAA 1.5 V batteries (contact type):
shaft (con/con internal)
- contact wheels (6in/0.1 m)
- fabric bag
- reflective tape
- standard cardboard box measuring 395 mm x 330 mm x 330 mm
- standard quantity per box: 10 pcs.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT-D07A Bluetooth Adapter UNI-T Bluetooth 4.0 Adapter
Compatible with UNI-T UT71, UT171, UT181
Supports iPhone; you must download the iDMM app from this website.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UNI-T UT 381A is a digital luxmeter, characterised by a wide measurement range, high safety and reliability, and is widely used for measuring illuminance in lighting equipment, laboratories, offices, commercial premises and other locations. Ix.- The probe includes integrated, split and rotating types; the product is suitable for measurement in various locations.- It has a function for recording measured data; up to 99 sets of data can be recorded.- Real-time display- Users can view maximum, minimum and average values. 0–400,000 lx- Resolution: 0–99.99 lx (99.99 fc) / 0.01 lx (0.01 fc) 100–999.9 lx (999.9 fc) / 0.1 lx (0.1 fc)<000–04 lx (0.01 fc) (37,160 fc) / 1 lx (1 fc)
- accuracy: ±3%, at a temperature of 2856 K, calibration is performed against a standard light source +6%, for other visible light sources
- unit switching: Ix, fc, automatic range 1x, fc, Ix, 1 fc = 10.76 - 1 fc switching- MAX, MIN, AVG values- Data log- Colour correction factor (CCF)- Backlight: ✓- Bluetooth app- Data logging: 99 sets- Recording interval: 1–59 s- Real-time measurement type- Integrated survey type: time is updated automatically via manual setting or by connecting to the phone app- Interval exceeded indicator: displays OL- low battery indicator: automatic shutdown when the low battery icon flashes for 10 seconds- automatic switch-off: switches off automatically after 10 minutes of inactivity; automatic switch-off can be disabled- Power supply: 3 x LR03/AAA batteries (included in the pack)- battery life: more than 100 hours (alkaline battery; Bluetooth and backlight are switched off)- Operating temperature and humidity: -10 °C to 50 °C, less than 90% RH (non-condensing) - Storage temperature: -20 °C to 70 °C, less than 80% RH (non-condensing) -20°C to 70°C, less than 80% RH (non-condensing)- dimensions: 235 x 64.5 x 40 mm- Weight: approx. 257 g, excluding battery
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UTP3315TFL-II DC Power Supply
This product comes with a 3-year warranty.
The UTP3315TFL-II is a linear DC power supply with a conventional transformer. Maximum voltage 30V DC, max. current 5A DC. This type of power supply is an ideal tool for universities and technical colleges, electronics production lines, appliance repairers, DIY enthusiasts, etc.
Two 4-digit LED displays for simultaneous display of voltage (red) and current (white), reverse polarity protection, short-circuit protection, overload protection. When the internal temperature of the transformer reaches 130 °C, the reversible thermal fuse cuts off the power supply to the transformer and automatically reconnects the power supply when the temperature drops. The device can be operated as a constant voltage source or as a constant current source. Coarse and fine voltage adjustment with a resolution of 10 mV, coarse and fine current limit adjustment with a resolution of 1 mA. The + and - terminals are galvanically isolated from the power supply housing and the earth conductor; if necessary, one pole can be connected to the earth terminal. The maximum ripple (noise) of the DC voltage is 2 mV rms and 3 mA rms.
Product parameters:
- number of digits on the LED display: 4 digits
- two displays
Technical parameters:
-
-
V
- output current range: 0–5 A
- maximum output power: 150 W
- number of digits on the red LED voltage display: 4
- number of digits on the white LED current display: 4
- load control mode: CV <0.01% + 5 mV
- load control mode
- Accuracy (25 °C ± 5 °C) Voltage display: ＜ 0.5% + 20 mV
- Current display accuracy (25 ℃ ± 5 ℃): ＜ 0.5% + 10 mA
- CV output control resolution: 10 mV (typical) output control resolution
- 1 CCA (typical) (typical)
- Ripple and noise: ≤2 mVrms, 3 mA rms
- Product colour: white and grey
- Weight: 4 kg
- Dimensions: 105 x 165 x 249 mm
- power supply: AC 110V / 230Hz ± 230Hz
- detachable three-pin power cable
- standard accessories: output cables
- packaging: 1 unit
- Standard quantity per box: 4 pcs
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UTP3313TFL-II DC Power Supply
This product comes with a 3-year warranty.
The UTP3313TFL-II is a linear DC power supply with a conventional transformer. Maximum voltage 30V DC, max. current 3A DC. This type of power supply is an ideal tool for universities and technical colleges, electronics production lines, domestic appliance repairers, DIY enthusiasts, etc.
Two 4-digit LED displays for simultaneous display of voltage (red) and current (white), reverse polarity protection, short-circuit protection, overload protection. When the internal temperature of the transformer reaches 130 °C, the reversible thermal fuse cuts off the power supply to the transformer and automatically reconnects the power supply when the temperature drops. The device can be operated as a constant voltage source or as a constant current source. Coarse and fine voltage adjustment with a resolution of 10 mV, coarse and fine current limit adjustment with a resolution of 1 mA. The + and - terminals are galvanically isolated from the power supply housing and the earth conductor; if necessary, one pole can be connected to the earth terminal. The maximum ripple (noise) of the DC voltage is 1 mV rms and 3 mA rms.
Product parameters:
- number of digits on the LED display: 4 digits
- two displays
Technical output parameters:
- DC voltage range: 0 V
- Output current range: 0–3 A
- maximum output power: 90 W
- number of digits on the red LED voltage display: 4
- Number of digits on the white LED current display: 4
- load control mode: CV <0.01% + 3 mV
- load control mode
-
- Accuracy
- m. (25 ℃ ± 5 ℃) Voltage display: ＜ 0.5% + 20 mV
- Display current accuracy (25 ℃ ± 5 ℃): ＜ 0.5% + 5 mA
- DC output control resolution: 10 mV (typical) AC output control resolution<br:/- 1 AC
- ripple and noise: ≤1 mVrms, 3 mA rms
- Product colour: white and grey
- Weight: 3 kg
- Dimensions: 105 x 165 x 249 mm
- Power supply: AC 110V / 230Hz ± 230Hz
- detachable three-pin power cable
- standard accessories: output cables
- packaging: 1 unit
- Standard quantity per carton: 4 pcs
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UTP3305-II laboratory power supplies are high-quality power supplies with three independent channels from the manufacturer UNI-T. The power supplies contain a classic linear transformer, and channels CH1 and CH2 allow operation in constant output voltage mode within the range of 0 to 32V or in constant output current mode from 0 to 5A. Channel CH3 provides a constant output voltage of 5V and features overload protection when the current draw reaches 3A. Channels CH1 and CH2 can operate independently of each other, or can be connected internally in series or in parallel, then supply voltages from 0 to 64V / 0 to 5A or from 0 to 32V / 10A. The laboratory power supplies have four LED displays that show voltages and currents simultaneously, with 4-digit accuracy on each of the CH1 and CH2 channels. The power supply contains a temperature-controlled fan; the long-term thermal overload of the laboratory power supply’s transformer is monitored by a sensor, which shuts down the power supply when the limit value is reached and restarts it after cooling. The device is CE certified.
Product parameters:
- setting of currents and voltages using fine multi-turn potentiometers
- four four-digit LED displays for immediate monitoring of voltages and currents in channels CH1 and CH2
- Voltage setting from 0 to 32V with a resolution of 0 to 32V with a resolution from 0/10V to
-m resolution of 1mA
- operation of channels CH1 and CH2 in constant voltage and constant current modes
- option to connect channels CH1 and CH2 internally in series or in parallel
- CH3 channel with fixed voltage of 5V, max. 3A
- temperature-controlled cooling fan
- disconnection from the power supply when the transformer is thermally overloaded
- 110V / 120V / 220V / 230V (AC 50 / 60Hz) input voltage selector on the rear
Technical output voltage
CH1 and CH2: 0 to 32 V
- CH1 and CH2 rated output current: 0 to 5 A
- CH3 rated output voltage / current: 5 V / max. 3 A
- total rated output power: 335W
- voltage / current setting resolution: 10 mV / 1 mA
- voltage setting accuracy: ± (0.1% of measured value + 30 mV)
- current setting accuracy: ± (0.3% of measured value)
- 0.3% of measured value + 0.1% of measured value plus noise (0–20 MHz) at CH1 and CH2 outputs: ≤1 mV RMS / ≤3 mA RMS
- ripple and noise at the CH3 output: ≤2mV
- temperature coefficient: voltage ≤300 ppm/°C // current ≤300 ppm/°C
Recovery time:
50%, minimum load: 0.5A)
- Rated supply voltage: AC 110V / 120V / 220V / 230V / (50 / 60Hz)
- protection via tubular fuse type: F10AL250V (when powered by 110/120V AC), (powered by 110/120V AC) 230V AC)
- power consumption: 700W
- dimensions: 319 x 146 x 226mm
- weight: 10.5kg
Package contents:
- UTP3305-II laboratory power supply
power cable
clips
- user manual
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UTP3303-II laboratory power supplies are high-quality power supplies with three independent channels from the manufacturer UNI-T. The power supplies contain a classic linear transformer, and channels CH1 and CH2 allow operation in constant output voltage mode within the range of 0 to 32V or in constant output current mode from 0 to 3A (or 0 to 5A for the UTP3305-II model). Channel CH3 provides a constant output voltage of 5V and features overload protection when the current draw reaches 3A. Channels CH1 and CH2 can operate independently of each other, or can be connected internally in series or in parallel, then supply voltages from 0 to 64V / 0 to 3A (5A) or 0 to 32V / 6A (10A). The laboratory power supplies have four LED displays that show voltages and currents simultaneously, with 4-digit accuracy on each of the CH1 and CH2 channels. The power supply contains a temperature-controlled fan; the long-term thermal overload of the laboratory power supply’s transformer is monitored by a sensor, which shuts down the power supply when the limit value is reached and restarts it after cooling. The device is CE certified.
Product parameters:
- setting of currents and voltages using fine multi-turn potentiometers
- four four-digit LED displays for immediate monitoring of voltages and currents in channels CH1 and CH2
- Voltage setting from 0 to 32V with a resolution of 0 to 32V; current setting from 0 to 10V with a resolution of 0/10V and a resolution of 1mA
- operation of channels CH1 and CH2 in constant voltage and constant current modes
- option to connect channels CH1 and CH2 internally in series or in parallel
- CH3 channel with fixed voltage of 5V, max. 3A
- temperature-controlled cooling fan
- Disconnection from the power supply when the transformer is thermally overloaded
- 110V / 120V / 220V / 230V (AC 50 / 60Hz) input voltage selector on the rear
Technical output voltage
CH1 and CH2: 0 to 32 V
- CH1 and CH2 rated output current: 0 to 3 A
- CH3 rated output voltage / current: 5 V / max. 3 A
- total rated output power: 207W
- voltage / current setting resolution: 10 mV / 1 mA
- voltage setting accuracy: ± (0.1% of measured value + 30 mV)
- current setting accuracy: ± (0.3% of measured value)
- 0.3% of measured value + 0.1% of measured value plus noise (0–20 MHz) at CH1 and CH2 outputs: ≤1 mV RMS / ≤3 mA RMS
- ripple and noise at the CH3 output: ≤2mV
- Temperature coefficient: voltage ≤300 ppm/°C // current ≤300 ppm/°C
Recovery time:
50%, minimum load: 0.5A)
- Rated supply voltage: AC 110V / 120V / 220V / 230V / (50 / 60Hz)
- fuse protection: tubular type: F6.3AL250V (when powered by 110 / 120V / 230V AC) 220 / 230V AC)
- Power consumption: 450W
- dimensions: 319 x 146 x 226mm
- Weight: 9.2kg
Package contents:
- UTP3305 laboratory power supply -- spare cable
>- Spare II
> alligator clips
- user manual
MANUFACTURER: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The UNI-T UTi740H professional thermal imager is specially designed for industrial use, with a wide temperature range: -30℃ to 650℃. Its large 4.3" IPS screen clearly displays the 384 × 288 IR resolution and 5MP digital camera. The professional manual focus lens can flexibly adjust the focal length and provide a high-quality image. The UTi740H camera also features other functions, such as WiFi, isotherm, on-screen analyser, etc. It is a perfect tool for troubleshooting many industrial applications.
Specifications:
- 4.3″ IPS display (800×480)
- IR resolution: 384 × 288
- Surface temperature measurement from -30 ℃ to 650 ℃
- Object temperature analysis: 5 points/ 1 line/ 5 MP digital camera resolution:/>- 5 MP rectangles
- 5 circles
- Focus: manual focus
- Digital zoom: 2x, 4x
- image modes: thermal, visual image, fusion, PIP
- automatic monitoring of the highest and lowest temperatures in the image
- high/low temperature alarm icon
- adjustable high and low temperature alarms
- blending of visible and thermal images
-
-
-
7 colour palettes for thermal image rendering: (White, Black, Red, Ironbow, HC Rainbow, Rainbow, Lava)
- Isotherm: 2 (automatic/manual)
- Wi-Fi connection via mobile app
- PC software: real-time image analysis and projection
- Saving images to a 3/2 GB micro SD card 5200mAh / 3.7 V Li-ion battery
- USB-C connector for battery charging, image transfer to a PC and image projection
- Protection: IP54
- ¼" tripod mounting thread
- Withstands drops from 2 m
Total infrared resolution: 3,288 pixels
- Temperature measurement range: -30℃ to 500℃ (-22℉ to 1202℉)
- Temperature measurement accuracy: from -10℃ to 650℃ (whichever is higher (ambient temperature 25 °C)
- Temperature measurement unit (℃/default), field of view (FOV): 28° x 21°
- Thermal sensitivity (NETD): < 60 mK
- IFOV (Instantaneous Field of View): 1.3 mrad
- Frame rate: ≤ 25 Hz
- Infrared measurement: infrared spectral band:
- μm manual focus
- 14 μm/m Emissivity: 0.01–1.00 adjustable (default 0.95)
- Digital zoom: 2x, 4x
- power supply: removable Li-ion battery (3.7 V/ 5200 mAh)
- operating time per charge: approx. 5 hours (with Wi-Fi disabled)
- Image/video certification,
- BMP: video/video format
- UKCA, ROHS
- Thermal imaging sensor: uncooled vanadium oxide
- Thermal imaging sensor pixel size: 17 μm
- Net weight: 806 g
- Product dimensions: 266 × 126 × 136 mm
- Standard box dimensions: 400 × 345 mm; packaging weight: 4.13 kg
- Standard accessories: Micro SD card, USB Type-C cable, manual, Li-ion battery, wrist strap
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UTi730E thermal imaging camera is a top-of-the-range model operating in the infrared spectrum, designed to measure the surface temperature of objects within a range of -40°C to +400°C.
The camera contains 76,800 uncooled vanadium oxide pixels, each with a 12μm vanadium dioxide sensor. The thermal image of objects, converted into a visible image using the selected colour palette, can be overlaid onto the image in the visible light range. A further 2 million pixels for visible light handle this. Setting the system date and time and generating QR codes for each photograph facilitates the subsequent classification of photographs. Manual or automatic triggering of the camera shutter at preset intervals. Saving images to the supplied microSD card or transferring them via Wi-Fi Hotspot, for example, to a laptop. Real-time image output via the USB-C connector to a laptop and TV. Switching temperature units between Celsius, Kelvin and Fahrenheit. Automatic monitoring of the hottest and coldest spots in the image with temperature indication, simultaneous temperature analysis of multiple objects: point, line, circular, rectangular. Setting temperature alarms. Image analysis on a PC or mobile phone using the supplied Vitta software and app. Removable 5200mAh Li-ion battery, which can be charged in the device or via an external charger.
The UTi730E thermal imager will find wide application in the construction industry for detecting heat loss from masonry, roofs or pipes, in the energy sector for identifying electrical faults, in management, in cold stores, in service centres for locating overloaded equipment, and in scientific research.
On the manufacturer’s website, you can download software in (.zip) or (.exe) format for connection to a PC, or for mobile applications in (.apk) or (.zip) format. You can also download the user manual here in English, French, German, Russian and Spanish:
https://thermal.uni-trend.com/product/uti730e/#Downloadsf52d-5897
Product specifications:
- surface temperature measurement from -40°C, analysis of the object’s temperature profile from +40°C to
(line), circle, rectangle
- 7 colour palettes for rendering the thermal image
- automatic monitoring of the highest and lowest temperatures in the image
- adjustable high and low temperature alarms
- blending of the thermal image with the visible image
- free-focus lens, very low digital zoom
, 4x pixel image
12 μm
- adjustable emissivity of measured objects
- setting the system time and date
- Saving images to the supplied micro SD card
- USB-C port for battery charging, image transfer to a computer and image projection
- Built-in Wi-Fi to create an LCD Hotspot
with a resolution of 5"-60,480px
- Built-in LED light
- Removable 5200mAh Li-ion battery
- ¼" tripod mounting thread
Technical specifications:
- total infrared resolution: 320 x 240 pixels (total resolution 76/240 pixels)
visible light sensor: 76/>-200 million pixels
- Temperature measurement range: -40 ℃ to 400 ℃ (-40 ℉ to 752 ℉)
- Temperature measurement unit: ℃ (default), ℉, K
- Temperature resolution: 0.1 °C
- thermal imaging sensor: uncooled thermal imaging sensor: uncooled pixel size 12 μm
- Measurement in the infrared spectral band: 8 μm to 14 μm
- Field of view (FOV): 56° x 42°
- thermal sensitivity (NETD): < 65 mK @25°C
- IFOV (instant focus):
- Instant focus mode:
- Instant focus lens
- Focal length: 4.0 mm
- digital zoom: 2x, 4x
- Frame rate: 9 Hz
- Temperature measurement accuracy: -10℃ to 400℃ (at a room temperature of 25℃ and ± 2℃ / ± 2%) to reach the maximum value on the LCD display:
- image mode: thermal imaging, visible light, fusion (0%, 25%, 50%, 75% and 100%) and picture-in-picture
- adjustable emissivity: 0.01 to 1.0 (default, analysis circle, temperature circle, rectangle, point 95, temperature circle: 0/>-95) (up to 6 objects at a time)
- thermal image mapping to a colour palette: iron red, rainbow, black heat, white heat, red heat, lava, high-contrast rainbow
- high and low temperature alarm: yes (LED light alarm and LCD animation alarm)
- analytical software: Vitta, APP, automatic trigger mode: manual trigger interval
- 1000 sec
- image save format: JPG
- Interface: microSD card with a maximum capacity of 32 GB, USB-C (charging, real-time image viewing and saving to disk, Wi-Fi hotspot
- menu language: English/French/German/Russian
- Certification: CE, FCC, ℃, ROHS, ℃; 50℃ (32℉ to 122℉)
- Storage temperature: -10℃ to 60℃ (14℉ to 140℉)
- Operating humidity: 10% to 95% RH (non-condensing)
- Power supply: removable battery: auto-off, removable battery: 0.0 mAh Optional Off/5/10/20/30/45/60/90 minutes
- Charging time: less than 4 hours
- Operating time per charge: more than 3 hours (with Wi-Fi off)
- IP rating: IP54 (IEC 60529:1989+A1:1999+A1:1999+A2:201 – net drop test)
-
weight: 654 g
- Product dimensions: 260 × 97 × 99 mm
- Standard box dimensions: 400 × 185 × 345 mm
- standard cardboard packaging weight GW: 3.6 kg
Package contents:
- 1 UTi thermal battery/thermal camera: 1 pc. 5200mAh: 1 pc
- USB Type-C cable: 1 pc
- 16 GB micro SD card: 1 pc
- instruction manual: 1 pc
Manufacturer:
UNI-TREND
