Description
This product comes with a 3-year warranty.
The UT196 True RMS solar multimeter from UNI-T is a professional-grade product designed for professionals who install or maintain photovoltaic or wind power plants. The device’s design allows it to operate in harsh outdoor environments – it has IP65 protection and can withstand a drop from a height of 2 m. This multimeter measures DC voltage up to 1700 V and AC voltage (true RMS) up to 1500 V at a frequency range of 45 to 1000 Hz. With the optional UT-CS09D Flex current loop, it allows non-contact measurement of AC currents from 1.5 to 3000 A, even in confined spaces. In addition, the UT196 measures frequency, resistance, capacitance, semiconductor transitions and electrical circuit continuity.
The low-pass function allows you to filter out RF interference generated by the inverter. The low-impedance mode can help with troubleshooting sensitive circuits, as well as circuits that may contain stray voltages. A built-in torch, a bright backlight, and audible and visual alarms allow users to complete their work safely and efficiently, even in dark and noisy environments.
The UT196 solar digital multimeter is designed with overload protection of 1700V DC, 1500Vrms AC and tested for safe use in a CAT III 1000V, CAT IV, UK and CA600V, UK and CA 600Vrms certified environment. cETLus.
Product specifications:
- Multifunctional multimeter designed for use in both outdoor and indoor photovoltaic and wind power installations
- measurement of AC/DC voltage, resistance, capacitance, frequency, diodes, circuit continuity, with external current loop and AC current
- LCD display
-, backlit maximum value
-- display: ± 6000, values are updated 2 to 3 times per second
- analogue bar graph: yes, 31 segments, measurement rate of 30 times per second
- range switching: automatic / manual
- automatic AC/DC voltage detection: yes
- non-contact electromagnetic field measurement (NCV): yes
- diode testing (semiconductor junctions): yes, open-circuit voltage approx. 3V
- electrical circuit continuity test: yes, the circuit is considered closed when R ≤ 10Ω, then the buzzer emits a beep
- built-in low-pass filter (LPF): yes, when the LPF is activated, interfering voltages above 1.2 kHz are attenuated by ≥ -3 dB/0>Hz relative to the measured attenuation
Hz. yes
- Peak Hold: yes
- Data Hold: yes
- Max/Min mode: yes
- Power supply: 9V battery / 6F22,
- Low battery indication: yes, when voltage drops below <7.5V, - automatic switch-off during inactivity
-1
- minutes
- Built-in torch: yes
- audible and visual indicator: yes
Technical parameters:
DC voltage measurement (V): Range / Resolution / Accuracy
600.0 mV / 0.1 mV / ±(0.5%/1 V/5.0)
±(0.2%+5)
60.00 V / 0.01 V / ±(0.2% + 5)
600.0 V / 0.1 V / ±(0.2% + 5)
1700V / 1V / ±(0.2%+5)
The input range is approximately mV/DC. 1GΩ.
AC voltage measurement (V): Range / Resolution / Accuracy
600.0 mV / 0.1 mV / 45 Hz to 500 Hz: ± (0.8%+3); 500 Hz to 1 kHz: ± (1.8%+3)
6.000V / 0.001V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
60.00 V / 0.01 V / 45 Hz to 500 Hz: ± (0.8% + 3); 500 Hz to 1 kHz: ± (1.8% + 3)
600.0V / 0.1V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
1500 V / 1 V / 45 Hz to 500 Hz: ± (0.8% + 3); 500 Hz to 1 kHz: ± (1.8% + 3)
Input impedance in the mV/AC range is approx. 10MΩ.
Automatic AC/DC voltage measurement: automatic range / Resolution / Accuracy
0V to 600.0V / 0.1V / DC to 500Hz: ± (2.0%+3); 500 Hz to 1 kHz: ± (4.0%+3)
With automatic range selection, LPF, Peak Hold selection is not possible; the input impedance is 2 MΩ
Resistance measurement: range / resolution / accuracy
600.0Ω / 0.10Ω / ±20.10Ω / ±20.10Ω 1Ω / ± (0.8%+2)
60.00 kΩ / 10 Ω / ± (0.8% + 2)
600.0 kΩ / 100 Ω / ± (0.8% + 2)
6,000 MΩ / 1 kΩ / ± (1.2%/+6 Ω)<0br/>+3 Ω. (2.5%+5)
Capacitance measurement: Range / Resolution / Accuracy
60.00 nF / 0.01 nF / in REL mode: ± (3%+10)
600.0 nF / 0.1 nF / ± (1.9% > +5.00 μF / 0.00 μF / 0.00 μF / 5.00 μF) ± (1.9% + 5)
60.00 μF / 0.01 μF / ± (1.9% + 5)
600.0μF / 0.1μF / ± (1.9%+5)
6,000 mF / 0.001 mF / ± (5% > +5)
0.001 mF / 0.001 mF / ± (5% >+5) ± (5%+5)
Measurement of AC currents with a UT-CS09D Flex current loop: Range / Resolution / Accuracy
30.00A / 0.01A / ± (0.8%+8)
300.0A / 0.1A /+300.0A / 0.1A /+0. ± (0.8%+8)
Frequency measurement: Range / Resolution / Accuracy
60.00 Hz to 1,000 MHz / 0.1 Hz to 0.001 MHz / ± (0.08% +4)
Other operating parameters: -0.001 MHz 40°C (32°F – 104°F)
- Storage temperature: -10°C to 50°C (14°F to 122°F)
- relative humidity: ≤75% RH (0°C - 30°C), ≤50% RH (30°C) operating altitude -
≤2000m
- EMC immunity: in accordance with EN61326-1: 2013, EN61326-2-2: 2013
- Power supply: 9V battery / 6F22
- External dimensions: 195 x 95 x 58 mm
- Weight: 4–85 g
- Drop test: 2m
- Certification: CE, UKCA, cETLus (CAT III 1000V, CAT IV 600V)
- Complies with standards: EN61010-1, EN61010-2-033, EN/IEC 61010-031 :-Contents of individual packaging :-/>
UT196 Solar PRO multimeter: 1 pc
- test leads: 1 pair
- 9V/6F22 battery: 1 pc
- user manual: 1 pc
Manufacturer:
UNI-TREND
-
