EV Chargers

Transform the way you charge your electric vehicle with the Deye SUN-EVSE22K01-EU-AC, a smart AC EV charging station designed for both residential and commercial applications. Compatible with both single-phase and three-phase electrical systems, it delivers up to 22 kW of charging power while seamlessly integrating with the Deye hybrid inverter ecosystem to maximize the use of solar energy generated by your photovoltaic system. The charging station can operate independently or together with a Deye hybrid inverter. Through LoRa communication, it intelligently optimizes the charging process based on solar power production and household energy consumption. This allows your EV to be charged using surplus solar energy, significantly reducing electricity costs. With Wi-Fi, Bluetooth, and LoRa connectivity, monitoring and configuration are quick and convenient via the Deye mobile application or directly through the device interface. The charger supports multiple intelligent charging modes, including instant charging, scheduled charging, and solar-only charging. Designed for outdoor installation, the robust IP66-rated enclosure provides excellent protection against water, dust, and harsh weather conditions, ensuring reliable long-term operation. Key Features Up to 22 kW AC charging power (three-phase) Compatible with both single-phase and three-phase power supplies Adjustable charging current from 6 A to 32 A Intelligent charging using surplus solar energy Seamless integration with Deye hybrid inverters LoRa, Wi-Fi, and Bluetooth communication Automatic charging schedule Plug & Charge functionality Remote monitoring and control via mobile app Suitable for indoor and outdoor installation Durable IP66 weatherproof enclosure Compatible with most European electric vehicles equipped with a Type 2 connector Charging Modes Plug & Charge Scheduled Charging Solar-Only Charging Smart Charging Based on Household Energy Consumption Charging During Off-Peak Electricity Tariffs Smart Functions Real-time energy monitoring Mobile app control Remote firmware updates Intelligent Load Balancing Solar energy prioritization Direct LoRa communication with Deye hybrid inverters Integrated Protection Overvoltage Protection Undervoltage Protection Overload Protection Short-Circuit Protection Overtemperature Protection Low Temperature Protection Ground Fault Protection DC Residual Current Protection Surge Protection (SPD Type II) Technical Specifications Feature Specification Model SUN-EVSE22K01-EU-AC Charging Type AC Maximum Charging Power 22 kW (Three-Phase) / 7 kW (Single-Phase) Supply Voltage 230 V / 230–400 V Adjustable Charging Current 6–32 A Maximum Current 32 A Frequency 50/60 Hz Electrical Connection L+N+PE / 3L+N+PE Vehicle Connector Type 2 (IEC 62196-2) Communication LoRa, Wi-Fi, Bluetooth Protection Rating IP66 Operating Temperature -40°C to +55°C Noise Level <25 dB Installation Wall-mounted Application Indoor / Outdoor Compatibility The charging station is recommended for: Residential photovoltaic systems Deye hybrid inverter systems Commercial buildings Private parking areas Electric vehicle fleets Most electric vehicles and plug-in hybrid vehicles equipped with a Type 2 charging connector Package Contents Deye SUN-EVSE22K01-EU-AC EV Charging Station Integrated Type 2 Charging Cable Wall Mounting Bracket Installation Accessories RFID Authentication Cards User Manual Download User ManualDownload Technical Datasheet

Read more less

High-power electric vehicle charging station The EV Charging Station has three-phase and single-phase capabilities. It supplies a maximum of 22 kW in three-phase operation or 7.3 kW in single-phase operation. WiFi communication WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point mode or Station mode for both initial configuration and monitoring. Easy operation and control via Bluetooth and the VictronConnect app Get complete control and an overview of all operating parameters and session statistics at a glance. Touchscreen LCD Built-in 4.3-inch LCD touchscreen for monitoring and control. Light ring for quick device status view Fully programmable RGB light ring around the charging port, for quick determination of the device’s status. Can be programmed via the integrated web interface to display different lighting effects depending on the current status (off, charging, charged, etc.). Three operating modes available: 1. Manual mode for configuring the output current Manual mode allows an output current to be set between 6 and 32 A. The charging power is controlled in two ways: using the slider on the LCD touchscreen or via the web page. It allows manual start or stop the charging process when a vehicle is connected to the charging station. 2. Automatic mode to ensure maximum efficiency of the photovoltaic system It detects when excess power is available and uses only the power required to charging the vehicle. 3. Scheduled mode for charging an electric vehicle at specific times A fully programmable controller allows charging at different times, such as specific hours the night, when grid energy is cheaper. Integration with GX and VRM devices Control and monitor the EV Charging Station via the GX device’s touchscreen, the remote console and the VRM portal. The VRM portal provides real-time and customised reports for configurable time periods.

Read more less

High-power electric vehicle charging station The EV Charging Station NS (NS electric vehicle charging station) supports both three-phase and single-phase operation. It supplies up to 22 kW in three-phase operation or 7.3 kW in single-phase. It has a blue front panel. A white or black front panel can be purchased separately. WiFi communication WiFi: 802.11 b/g/n for configuration, monitoring and control. The internal WiFi module can be configured in Access Point mode or in Station mode for both initial configuration and monitoring. Easy operation and control via Bluetooth and the VictronConnect app Get full control and an overview of all operating parameters and session statistics at a glance. Light ring for quick device status overview Fully programmable RGB light ring around the charging port, for quick determination of the device’s status. Can be programmed via the integrated web interface to display different lighting effects depending on the current status (off, charging, charged, etc.). Three operating modes available: 1. Manual mode for configuring the output current Manual mode allows an output current to be set between 6 – 32 A. The charging power can be adjusted in various ways: via the web interface, from a GX and VRM device, and via VictronConnect. It allows the manually stopping the charging process when a vehicle is connected to the charging station. 2. Automatic mode to ensure maximum efficiency of the photovoltaic system It detects when excess power is available and uses only the power required to charging the vehicle. 3. Scheduled mode to charge an electric vehicle at specific times A fully programmable controller allows charging at different times, such as specific hours the night, when grid energy is cheaper. Integration with GX and VRM devices Control and monitor the NS EV Charging Station via the GX device’s touchscreen, the remote console and the VRM portal. The VRM portal provides real-time and customised reports for configurable time periods.

Read more less

Optimal Performance and Flexibility: The Sinexcel IZAR charging station offers an efficient and powerful solution for charging electric vehicles, with a rated power of 7kW. It supports a single-phase input voltage of 230V and a current of 6–32A, making it ideal for residential use. The included 5m cable offers increased flexibility in various installation scenarios. Durable and Safe Design: With an IP65 and IK10 protection rating, the station is designed to withstand harsh outdoor conditions, including protection against dust and water ingress. It features a built-in Type A+DC 6mA residual current device (RCD) for added safety. Advanced Technology: The station utilises cutting-edge technology, including an optional MID meter for consumption measurement and multiple authorisation options, such as NFC/RFID (optional), ‘Plug and Charge’, and app control. It supports the OCPP 1.6J communication protocol, upgradeable to 2.0, and can connect via LAN, Wi-Fi or 4G (optional), offering versatility in charging management and monitoring. Security and Management Features: The station incorporates advanced cybersecurity features and enables remote management, diagnostics, configuration, maintenance and updates via the Sinexcel platform. It also allows user authorisation management via the Sinexcel AC APP. Simple and Intuitive Installation: The station is easy to install and comes equipped with all the necessary installation accessories, including anti-theft screws and cable ties. Durability and Certifications: The product complies with European standards and is CE, TR25, TUV Mark and RCM certified. It is built to operate in temperatures ranging from -30 ℃ to +55 ℃ and can function at altitudes of up to 2000m.

Read more less

Electric vehicle charging station, 22 kW, three-phase, 32A, 400VAC ± 10% power supply, Type 2 cable, LEDs indicating charging status, 50Hz frequency, IP65 weatherproofing, IK10 vandal-proofing, dimensions 170x210x105mm, aluminium housing. Management and access via Android & iOS mobile app, Bluetooth, option to configure the charging current via the app and set any value within the range of 8A – 32A. The station includes electronic differential protection: AC 30mA + DC 6mA. Product manufactured in ROMANIA

Read more less