In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Pylontech power cable set is required to connect the battery to the photovoltaic inverter. This cable kit is compatible with the Pylontech US2000C, US3000C or Pytes battery models. Each battery unit includes the interconnect cables between batteries (parallel connection to another battery), whilst this cable kit is for connection to the inverter.
2 x 2 m power cables (positive and negative)
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Pytes V5° battery with built-in heating
How does it work?
The integrated battery heating system is powered exclusively by the charging source, such as the inverter or charge controller (regardless of the devices supplying current to charge the battery). The heater draws up to 180 W from the charging source (per battery) and will heat the battery by up to 10°C per hour. The heater operates within a typical operating range of -20°C to 10°C. If the battery temperature drops below 5°C, the heater will switch on, using power from the charging source to raise the temperature to 10°C. If the battery temperature is between 2°C and 5°C, the heater will switch on and the battery will be charged (at the same time) until the battery reaches a temperature of 10°C, at which point the heater will switch off and the battery will continue to be charged. If the battery is below 2°C, the charging current will be directed solely to the heating system until the battery rises above 5°C, at which point the battery will charge normally. The heating system will not affect the battery’s SOC.
The Pytes V5° battery requires 4U of space to allow the bus to connect correctly between batteries and to facilitate adequate cooling. For example, you will need a server rack of at least 12U to allow for the installation of three batteries.
Features:
- Charging below freezing point
- Long-life battery module integrated with LFP cells, with a lifespan of ≥6000 cycles
- Intelligent energy management with sophisticated BMS to maximise reliability and longevity, remote update
- Easy connection: up to 300 A in parallel
- High charge/discharge rate: fully charged in 1 hour, high output power (1C)
Specifications:
Nominal voltage: 51.2 V
Rated capacity: 100 Ah
Nominal energy: 5.12 kWh
Chemistry: Lithium Iron Phosphate (LiFePO4)
Maximum continuous charging current: 100A (1C)
Maximum continuous discharge rate: 100A (1C)
Communication protocol: RS485, CAN
Dimensions (L*W*H): 44cm x 53cm x 14cm
Weight: ~44kg
Included with the battery:
2 x 300A flexible busbars
1 CAN / RS485 daisy-chain communication cable
1 x 10AWG earthing cable
Download the technical data sheet
Download the list of compatible inverters (CAN/RS485)
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The V-TAC VT-12040-1 10.24kWh photovoltaic battery is an advanced energy storage solution, designed for residential and commercial photovoltaic systems that require high performance and reliability in all conditions.
Based on LiFePO4 (lithium iron phosphate) technology, this battery offers an extended lifespan of over 6,000 cycles, superior thermal stability and a high level of operational safety.
With a capacity of 10.24kWh (200Ah) and a nominal voltage of 51.2V, it is ideal for low-voltage hybrid photovoltaic systems, being compatible with most inverters on the market (e.g. Deye).
Thanks to its IP65 protection rating, the battery can be installed both indoors and outdoors, as it is resistant to dust and moisture.
✔ High capacity for extended runtime✔ Stable operation in extreme conditions✔ Flexible indoor/outdoor installation✔ Ideal solution for self-consumption and backup
Advantages & benefits
✔ Can be installed outdoors (no need for a technical room)✔ Long runtime for high-demand consumers✔ High safety (stable LiFePO4 chemistry)✔ Ideal for areas with low temperatures✔ Scalable system for expansion
General information
Brand
V-TAC
Model
VT-12040-1
Battery type
LiFePO4
Electrical data
Capacity
10.24 kWh
Capacity (Ah)
200 Ah
Nominal voltage
51.2V
Standard charging voltage
57.6V
Maximum charging voltage
57.6V
Minimum discharge voltage
43.2V
Rated current
90A
Maximum current
100A
Capabilities
Cell chemistry
LiFePO4
Protection rating
IP65
Charging temperature
0°C ~ +60°C
Discharge temperature
0°C to +60°C
Physical details
Dimensions
460 x 265 x 800 mm
Weight
95.8 kg
Installation
Floor
Colour
Grey
Other
Product code
VT-12040-1
EAN code
3800170260658
Warranty
10 years
✅Capacity: 10.24kWh (200Ah)
✅Nominal voltage: 51.2V
✅Technology: LiFePO4 (LFP)
✅Lifespan: ≥6000 cycles
✅Protection rating: IP65
✅Current: 90A nominal / 100A maximum
✅Installation: floor-✅10-year warranty
Download technical data sheet
Download manual
Download RED certificate
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Deye SE-F5 Pro-C 5.12kWh LiFePO4 battery is a modern and reliable energy storage solution for small to medium-sized residential or commercial photovoltaic systems. Designed for high performance and long-term durability, this battery utilises LiFePO4 (Lithium Iron Phosphate) technology, renowned for its safety, thermal stability and extended cycle life.
With a capacity of 5.12 kWh and 100Ah, the battery offers efficient energy utilisation thanks to a depth of discharge of up to 90%, allowing for maximum use of stored energy. The integrated intelligent BMS constantly monitors the battery parameters and provides protection against overvoltage, overcurrent or extreme temperatures.
The Deye SE-F5 Pro-C battery is designed for flexibility and scalability, with up to 32 units able to be connected in parallel, making it ideal for both residential systems and commercial applications or off-grid systems.
Its robust design, lifespan of over 6,000 cycles and international safety certifications make this model a safe choice for modern photovoltaic projects.
Advantages of the Deye SE-F5 Pro-C battery
High discharge power – up to 100A continuous and 150A maximum, for loads with high energy requirements.
Optimised usable capacity – 5.12 kWh nominal energy with a 90% depth of discharge.
High scalability – up to 32 batteries can be connected in parallel for larger storage systems.
Advanced safety – integrated smart BMS and international certifications for comprehensive protection.
Extended lifespan – over 6,000 charge/discharge cycles for long-term use.
Simple installation – compatible with modern photovoltaic systems and smart monitoring.
General information
Model
SE-F5 Pro
Battery chemistry
LiFePO4 (Lithium Iron Phosphate)
Capacity
100 Ah
Scalability
Max. 32 units in parallel
Electrical data
Nominal voltage
51.2 V
Operating voltage
44.8 V – 57.6 V
Rated power
5.12 kWh
Physical data
Approximate weight
44 kg
Dimensions (W × H × D)
547 × 404 × 141 mm
Certifications and safety
Certifications
UN38.3, MSDS, CE, CB, VDE2510-50, CEC
✅ Capacity 5.12 kWh / 100Ah
✅ Safe LiFePO4 technology
✅ Intelligent BMS with multiple safety features
✅ Up to 32 batteries in parallel
✅ Over 6000 charge cycles
Download the technical data sheet
Download Manual
Download certificate
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The E-BOX series: the new-generation LiFePo4 battery for energy storage systems. Battery manufacturer Pytes offers a safe, well-designed and high-performance LiFePo4 solution. The battery pack is compact, easy to install, maintenance-free and can be integrated into an energy storage system by connecting multiple units in parallel. It is widely used in domestic applications, small commercial and industrial energy storage systems, as well as telecommunications stations.
Download the technical data sheet
Download the list of compatible inverters (CAN/RS485)
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Felicity Solar FLA48314-EU 16kWh LiFePO4 battery is a modern and safe energy storage solution, designed for residential and commercial applications. Based on lithium iron phosphate (LiFePO4) technology, this battery offers an extended service life, stable performance and a high level of operational safety.
With a nominal voltage of 51.2V and a capacity of 16kWh, the battery is optimised for hybrid and off-grid photovoltaic systems. The system integrates an intelligent BMS, multiple protections, safety features and a circuit breaker, ensuring reliable operation even under demanding conditions.
Technical specifications
Battery type: LiFePO4
Rated energy: 16kWh
Nominal voltage: 51.2V
Operating voltage: 44.8 – 57.6V
Maximum continuous charge/discharge current: 160A
Maximum peak current (15s): 300A
Maximum power (15s): 8,000W
Depth of discharge (DOD): ≥95%
Cycle life: ≥8,000 cycles
Scalability: up to 15 units (240kWh)
Communication: RS485 / CAN
Protection rating: IP21
Charging temperature: 0°C – +55°C
Discharge temperature: -20°C – +55°C
Display: LCD + LED
Installation: floor-mounted
Product weight: 121.5 kg
Warranty: 10 years
Certification: UN38.3
A major advantage of the FLA48314-EU model is its high scalability, allowing up to 15 units to be connected in parallel, for a total capacity of up to 240kWh. Communication via RS485 / CAN ensures broad compatibility with leading inverter brands.
For advanced monitoring, the battery features integrated WiFi and Bluetooth, providing real-time access to operational data. Furthermore, it is equipped with an aerosol fire suppression system, an essential feature for added safety.
Its compact design, floor-mounted installation and operation across a wide temperature range make this battery an excellent choice for long-term energy storage projects.
Equipped with an integrated aerosol fire suppression system and an IP21 protection rating, the Felicity Solar LiFePO4 FLA48314-EU 16kWh battery offers a safe, reliable and scalable solution for energy storage in modern photovoltaic systems.
✅ 16kWh / 51.2V✅ Integrated aerosol fire suppression system✅ WiFi & Bluetooth for monitoring✅ CAN / RS485 communication✅ Over 8,000 charge cycles ✅ 10-year warranty
Download user manual
Download the technical data sheet
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Ensure a safe, stable and professional installation of Pytes 5.12kWh LiFePO4 batteries with this modular metal rack, specially designed for use in photovoltaic systems.
Compatible with the E-BOX-48100R modelRobust construction, made from corrosion-resistant metalCompact design, ideal for installation in technical rooms, cabinets or dedicated roomsQuick assembly – the structure is supplied with all necessary componentsAllows for the safe, vertical stacking of multiple batteries
Ideal for residential, commercial or industrial projects requiring an organised system for supporting and protecting solar batteries.
Technical specifications:
Compatibility: Pytes 5.12kWh LiFePO4 batteries
Material: Steel
Installation: Floor-mounted, with a stable guide system
Dimensions: Perfectly suited to E-BOX-48100R enclosures
Delivery: Supplied unassembled, with mounting system included
Load capacity: Maximum 400 kg
Benefits:
Excellent organisation of the storage system
Professional and clean appearance
Reduces the risk of damage or overloading of connectors
Ensures optimal ventilation between modules
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Note: Depending on stock availability, the cables may differ from the image shown. It is possible that both wires (positive and negative) are black.
Power cable set for connecting batteries to the inverter. The set contains a red positive cable, a black negative cable and cable lugs with an M10 hole.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The V-TAC VT-10240W LiFePo4 photovoltaic battery is a state-of-the-art energy storage solution, ideal for residential and commercial photovoltaic systems. With a nominal capacity of 10.24kWh and a voltage of 51.2V, this battery offers high efficiency and an extended service life, ensuring a reliable power supply for your customers.
✔ Advanced LiFePo4 technology – Long service life and optimal performance.
✔ Power and efficiency – 200Ah capacity and 90A charge and discharge current.
✔ Guaranteed safety – IP20 protection and CAN communication system for effective monitoring.
✔ Extended 10-year warranty – Long-term reliability for your investment.
✔ Manufacturer’s recommendation – Charge at 90A up to 58.4V, then maintain the voltage at 58.4V until the charging current reaches 10.3A.
Technical Specifications:
Nominal capacity: 200Ah
Nominal voltage: 51.2V
Nominal energy: 10.24kWh
Standard charge/discharge current: 90A
Maximum continuous charge/discharge current: 100A
Standard charging voltage: 58.4V
Charging limit voltage: 58.4V
End-of-discharge voltage: 43.2V
Communication: CAN
Internal resistance: 16mΩ
Dimensions (L x W x H): 420 × 237 × 775 mm
Protection rating: IP20
Operating temperature (charging): 0 ~ 55°C
Operating temperature (discharge): -20 ~ 60°C
Connection mode: maximum 16 units in parallel
https://www.tiktok.com/@solartech.ro/video/7464962714566216992?lang=en
✅ Floor mounting
✅ CAN communication port
✅ Up to 16 units can be connected in parallel
✅ Over 6,000 cycles at 80% DOD
✅ Nominal capacity: 200Ah
✅ Nominal voltage: 51.2V
✅ Nominal energy: 10.24kWh
✅ 10-year warranty
Download the technical data sheet
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Note: Depending on stock availability, the cables may differ from the image shown. It is possible that both wires (positive and negative) are black.
Power cable set for connecting batteries to the inverter. The set contains a red positive cable, a black negative cable and M12 cable lugs.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The V-TAC VT-91600 9.6kWh photovoltaic battery is a high-performance energy storage solution designed for residential and commercial photovoltaic systems requiring greater autonomy and high efficiency.
Based on LiFePO4 (lithium iron phosphate) technology, this battery offers an extended lifespan of over 6,000 cycles, high thermal stability and a superior level of operational safety. With a capacity of 9.6kWh (200Ah) and a nominal voltage of 48V, it is ideal for low-voltage systems and compatible with most hybrid inverters (Deye, etc.).
A major advantage of this model is the integrated Wi-Fi module, which allows real-time monitoring and control of the battery, giving the user complete visibility over energy consumption and storage.
✔ High capacity for extended runtime✔ Smart monitoring via Wi-Fi✔ Integrated BMS for complete protection✔ Ideal for hybrid and off-grid systems
? The 19” rack design allows for easy integration into switchboards or technical rooms, saving space and facilitating system expansion.
Advantages & benefits
✔ Longer runtime compared to 5kWh batteries✔ Real-time monitoring (total control over energy)✔ Safe and stable system (LiFePO4)✔ Scalable – you can connect multiple units in parallel✔ Ideal for high-demand users or extended backup
General information
Brand
V-TAC
Model
VT-91600
Battery type
LiFePO4
Lifespan
≥6000 cycles
Electrical data
Capacity
9.6 kWh
Capacity (Ah)
200 Ah
Nominal voltage
48V
Recommended current
90A
Maximum current
100A
Capabilities
BMS
Integrated
Connectivity
Wi-Fi
Charging temperature
0°C to +60°C
Discharge temperature
-20°C to +60°C
Protection rating
IP20
Physical details
Dimensions
505 x 576 x 135.2 mm
Mounting
Rack
Colour
Black
Other
Product code
VT-91600
Warranty
10 years
✅Capacity: 9.6kWh (200Ah)
✅Nominal voltage: 48V
✅Technology: LiFePO4 (LFP)
✅Lifespan: ≥6,000 cycles
✅Built-in Wi-Fi for monitoring
✅Maximum current: 100A
✅Mounting: rack (19”)
✅Compatible with 48V hybrid inverters
Download the technical data sheet
Download user manual
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 12V 100Ah LiFePO4 battery – DATB12100 is a modern, safe and highly efficient solution for solar applications, off-grid systems, caravans, boats, UPS systems and portable equipment. It utilises lithium iron phosphate chemistry, renowned for its superior thermal stability, long service life and excellent safety.
With a capacity of 1280Wh and an integrated smart BMS, the battery offers high charge/discharge currents, stable performance over time and complete cell protection.
It is ideal for users who want a reliable, maintenance-free battery with a significantly longer lifespan than AGM or GEL batteries.
Key benefits
Over 6,000 cycles at 80% DoD – long service life
Very safe LiFePO4 chemistry – zero risk of explosion, high thermal stability
High discharge current: 120A
High charging current: 50A
High efficiency: 95% during charging and 90% during discharging
Low weight: much lighter than lead-acid batteries
Maintenance-free – no need for topping up with water or regular servicing
Operates in extreme temperatures: -20°C to +65°C
Perfect for off-grid solar systems thanks to its stability and high cycle life
Recommended applications
Off-grid / hybrid photovoltaic systems
Caravans, motorhomes, campers
Boats, marine systems
UPS and backup systems for homes or businesses
Telecommunications systems
Portable equipment, camping
Light electric vehicles
Technical data – DATB12100
Specification
Value
Nominal voltage
12V – 12.8V
Nominal capacity
100Ah
Total energy
1280Wh
Chemistry
LiFePO4
Cycle life
6000 cycles
Maximum charging current
50A
Maximum discharge current
120A
Charging voltage
14.4V ±0.2V
Charging temperature
0°C – 45°C
Operating temperature
-20°C – 65°C
Charging efficiency
95%
Discharge efficiency
90%
Cell material
LiFePO4
Weight
11.8 kg
Dimensions
33 × 17.4 × 21.5 cm
Integrated BMS
Yes
Battery type
Solid-state
Brand
DATUBOSS
Model
DT12-100
User benefits
Low consumption and maximum efficiency in solar systems
Longer service life per cycle
Stability and safety for sensitive equipment
A sustainable long-term investment
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 12V 200Ah LiFePO4 battery – DATB12200 is a high-performance battery designed for applications requiring high power, excellent safety and a very long service life. With a total capacity of 2560Wh, this model is ideal for solar systems, caravans, boats, backup systems and industrial applications.
Thanks to LiFePO4 technology and the intelligent BMS, the battery offers advanced protection, high thermal stability and over 8,000 cycles, significantly outperforming AGM, GEL or lead-acid batteries.
It is an excellent solution for users who require constant power, heavy-duty operation and long-term reliability.
Key benefits
Over 8,000 cycles – extremely long service life
Very high discharge current: 200A
Maximum charging current: 100A
Ultra-safe LiFePO4 chemistry – stable and with no thermal risk
High efficiency: 95% at charge
Performance in extreme temperatures: -20°C to +65°C
Low weight for the capacity offered
Maintenance-free – no periodic procedures required
Compatible with solar systems and high-power UPS
Recommended applications
Off-grid / hybrid photovoltaic systems
Caravans and motorhomes
Boats and marine systems
Professional UPS and backup systems
Telecommunications
Industrial equipment
Camping, off-grid areas
Technical data – DATB12200
Feature
Value
Nominal voltage
12V – 12.8V
Nominal capacity
200Ah
Total energy
2560Wh
Cell type
LiFePO4 (LFP)
Cycle life
8,000 cycles
Maximum charging current
100A
Maximum discharge current
200A
Charging voltage
14.4V ±0.2V
Charging efficiency
95%
Discharge efficiency
90%
Charging temperature
0°C – 45°C
Operating temperature
-20°C – 65°C
Dimensions
50.5 × 24.5 × 24 cm
Battery weight
16.3 kg
Total package weight
17 kg
Battery type
Solid state
Brand
DATUBOSS
Model
DT12-200
BMS protection
Yes
User benefits
Perfect for high-capacity solar systems
Ensures stable long-term consumption
Ideal for off-grid homes, caravans or marine applications
Higher efficiency and lower total cost compared to lead-acid
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Ensure a safe, stable and professional installation of V-TAC 5.12kWh LiFePO4 batteries with this modular metal rack, specially designed for use in photovoltaic systems.
Compatible with modelVT-48100E-P2Robust construction, made from corrosion-resistant metalCompact design, ideal for installation in technical rooms, cabinets or dedicated roomsQuick assembly – the structure is supplied with all necessary componentsAllows for the safe, vertical stacking of multiple batteries
Ideal for residential, commercial or industrial projects requiring an organised system for supporting and protecting solar batteries.
Technical specifications:
Compatibility: V-TAC 5.12kWh LiFePO4 batteries
Material: Steel
Installation: Floor-mounted, with a stable guide system
Dimensions: Perfectly suited for VT-48100E-P2 enclosures
Delivery: Supplied unassembled, with mounting system included
Load capacity: Maximum 250 kg
Benefits:
Excellent organisation of the storage system
Professional and clean appearance
Reduces the risk of damage or overloading of connectors
Ensures optimal ventilation between modules
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Pytes Frame Set / Mount for 48V – 5kWh LiFePO₄ batteries, compatible with Pytes V5° and V5°α
The Pytes Frame Set is specially designed for the safe and efficient stacking of Pytes V5° and V5°α batteries. It offers a practical solution for organising energy storage systems, ensuring optimal airflow, excellent stability and quick installation.
The intelligent fastening system allows for mechanical connection between frames, keeping the modules perfectly aligned and preventing them from slipping during operation. Pytes has developed this mount to reduce installation costs and improve assembly efficiency, offering a compact alternative to traditional storage cabinets.
Applications
The frame set is used for the safe stacking of Pytes V5° and V5°α storage modules, either in a single configuration (with a single battery) or in a multi-unit system.It can be used in both residential and commercial applications where a stable mounting solution with effective ventilation is required.
Key benefits
Optimal air circulation – the space between modules allows for natural cooling of the batteries
Up to 6 Pytes V5°/V5°αmodules can be stacked
Safe and stable design – locking system with side clips
Quick and easy installation – no bulky cabinets
Reduced installation costs – a cost-effective and efficient solution
Installation method
For a single battery:The kit contains 4 fixing brackets that are mounted on the edge of the battery for secure positioning. Installation on a flat, horizontal surface is recommended to avoid scratching the battery’s insulating layer.
For multiple battery packs:Mount the frames onto the first module, then onto the second. After stacking two battery packs, the upper and lower clamps lock together. The same procedure is repeated for subsequent modules.
The base of each frame is 35 mm high, ensuring optimal airflow between units.
The price shown is for a single unit.
Download the technical data sheet
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The V-TAC VT-16076W LiFePo4 photovoltaic battery is a high-capacity energy storage solution designed for residential and commercial applications requiring reliable performance and extended runtime. With a total energy capacity of 16.07kWh and a nominal voltage of 51.2V, this model is ideal for photovoltaic systems aiming for energy independence and maximum efficiency.
Equipped with a CAN communication protocol, it allows for easy integration with compatible inverters, whilst its sleek and compact design makes it suitable for indoor installations.
Key features:
Nominal capacity: 314Ah
Nominal energy: 16.07 kWh
Nominal voltage: 51.2V
Standard charging current: 140A
Maximum continuous charging current: 150A
Standard discharge current: 140A
Maximum continuous discharge current: 150A
Standard charging voltage: 57.6V
Charging cut-off voltage: 57.6V
End-of-discharge voltage: 43.2V
Charging temperature range: 0 ~ 55°C
Discharge temperature range: -20 ~ 60°C
Dimensions: 510 × 242 × 862 mm
Protection: IP20
Communication: CAN
Connection mode: maximum 16 units in parallel
Internal resistance: 16 mΩ
Lifespan: ≥7000 cycles
Internal structure: 16 cells in series, 1 in parallel
Charging recommendation:
It is recommended to charge at a constant current of 140A until a voltage of 57.6V is reached, then continue charging at a constant voltage of 57.6V until the charging current drops to 15.7A.
Warranty:
The V-TAC VT-16076W battery comes with a 10-year warranty, ensuring long-term durability and reliability.
Why choose this model?
✔ High storage capacity – 16.07kWh✔ High compatibility via CAN communication✔ Over 7,000 charge cycles – outstanding durability✔ Ideal for high-energy-consumption applications✔ Easy to install and scalable – up to 16 units in parallel
The V-TAC VT-16076W battery is the perfect choice for those seeking energy efficiency, autonomy and consistent performance in all conditions. A smart solution for a sustainable future!
✅ Floor mounting
✅ CAN communication port
✅ Up to 16 units can be connected in parallel
✅ Service life:≥7,000 cycles
✅ Nominal capacity: 314Ah
✅ Nominal voltage: 51.2V
✅ Nominal energy: 16.07 kWh
✅ 10-year warranty
Download the technical data sheet
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Ensure a safe, stable and professional installation of V-TAC 5.12kWh LiFePO4 batteries with this modular metal rack, specially designed for use in photovoltaic systems.
Compatible with modelVT-48100E-P2Robust construction, made from corrosion-resistant metalCompact design, ideal for installation in technical rooms, cabinets or dedicated roomsQuick installation – the structure is supplied with all necessary componentsAllows for the safe, vertical stacking of multiple batteries
Ideal for residential, commercial or industrial projects requiring an organised system for supporting and protecting solar batteries.
Technical specifications:
Compatibility: V-TAC 5.12kWh LiFePO4 batteries
Material: Steel
Installation: Floor-mounted, with a stable guide system
Dimensions: Perfectly suited for VT-48100E-P2 enclosures
Delivery: Supplied unassembled, with mounting system included
Load capacity: Maximum 250 kg
Benefits:
Excellent organisation of the storage system
Professional and clean appearance
Reduces the risk of damage or overloading of connectors
Ensures optimal ventilation between modules
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Ensure a safe, stable and professional installation of V-TAC 5.12kWh LiFePO4 batteries with this modular metal rack, specially designed for use in photovoltaic systems.
Compatible with modelVT-48100E-P2Robust construction, made from corrosion-resistant metalCompact design, ideal for installation in technical rooms, cabinets or dedicated roomsQuick assembly – the structure is supplied with all necessary componentsAllows for the safe, vertical stacking of multiple batteries
Ideal for residential, commercial or industrial projects requiring an organised system for supporting and protecting solar batteries.
Technical specifications:
Compatibility: V-TAC 5.12kWh LiFePO4 batteries
Material: Steel
Installation: Floor-mounted, with a stable guide system
Dimensions: Perfectly suited for VT-48100E-P2 enclosures
Delivery: Supplied unassembled, with mounting system included
Load capacity: Maximum 400 kg
Benefits:
Excellent organisation of the storage system
Professional and clean appearance
Reduces the risk of damage or overloading of connectors
Ensures optimal ventilation between modules
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
PowerBrickPro is a modular low-voltage (48V) battery pack featuring high-density LiFePO4 technology, designed for residential and commercial applications. With a capacity of 14.33kWh, advanced IP65 protection and an intelligent automatic heating system, it ensures consistent performance even in adverse weather conditions.
Key features:
Useful capacity: 14.33kWh
Technology: Lithium Iron Phosphate (LiFePO4) – enhanced durability and safety
Integrated heating: reliable operation at low temperatures
IP65 protection rating: ideal for outdoor installation
Scalability: up to 50 units connected in parallel
Cycle life: over 6,000 cycles at 90% DoD
Smart BMS: advanced protection against overcharging, short circuits and extreme temperatures
Compatibility: GoodWe, Victron, Solis, Growatt, LuxPower, Deye inverters and others
Recommended applications:
On-grid and off-grid photovoltaic systems
Single-family homes
Shopping centres or offices with medium to high consumption
Battery backup solutions for power outages
✅ Energy capacity: 14.33 kWh
✅ IP65 protection rating
✅ Integrated heating
✅ Warranty: 10 years
Download the technical data sheet
Download manual
Download list of compatible inverters
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Power, come rain or shine
The weather-resistant construction and IP65 certification guarantee protection against rain, mud, dust and salt corrosion. Optimised ventilation protects the internal components, making the AC240P a reliable companion on any journey or activity.
More than just technology – it’s a revolution
The Bluetti AC240P combines design and innovation in a modular power station, with advanced performance for professional applications or long-term adventures.
Ideal for caravans and yachts
The dedicated RV port ensures power to all systems in your caravan or boat. Whether you’re at sea or off-road, the AC240P offers you total autonomy without compromise, wherever you are.
Pushing the boundaries of portable power stations
Power Lifting Mode
Delivers 2,400W in normal mode and up to 3,600W with Power Lifting activated – perfect for high-power devices, without the need for a petrol generator.
Modular design – like a LEGO set for power
You can add up to 4 B210P batteries (each with IP65 protection and its own USB-A & USB-C ports) to reach a total capacity of 10,443Wh.
Charge any way, anywhere
Whether you choose solar panels, a wall socket, car charging, a lead-acid battery or shore power (for yachts), the AC240P adapts to your needs.*An additional cable (sold separately) is required for Turbo Charging and shore power.
A decade of autonomy. Total protection.
Intelligent BMS (Bluetopus AI) – protection against overcharging, over-discharging and overcurrent
LiFePO₄ battery – over 3,500 cycles
Lifespan: 10 years | Warranty: 6 years
✅ IP65-rated – water and dust resistant
✅ 2,400W AC output / Power Lifting up to 3,600W
✅ Extended capacity up to 10,443Wh with 4 B210P batteries
✅ 0–80% charge in 45 minutes with 2,200W AC
✅ Maximum solar input: 1,200W
✅ Smart control via the BLUETTI app (Bluetooth & WiFi)
✅ UPS function with 15ms seamless switching
Download the user manual
Download the technical data sheet
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 400A V-TAC busbar is designed for the efficient distribution of current in high-performance electrical systems. With its robust construction and high-quality materials, this busbar ensures a safe and durable connection in a variety of applications, including solar, marine and industrial systems.
Technical specifications:
Rated current: 400A
Maximum voltage: 48V DC / 300V AC
Dimensions: 168 x 79 x 40 mm
Base and cover material: Glass fibre-reinforced nylon
Busbar material: Tin-plated copper
Number of terminals: 4 M10 (3/8") screws
Colour: Red (positive) and Black (negative)
Protection: Protective cover included to prevent accidental contact
Key benefits:
High current capacity: Withstands up to 400A, ideal for applications with high current requirements.
Durable construction: High-quality materials for long service life and corrosion resistance.
Easy installation: Compact design and standard M10 terminals for quick and secure connection.
Enhanced safety: The protective cover prevents short circuits and ensures safe handling.
Recommended applications:
Photovoltaic systems and solar installations
Electric and marine vehicles
Industrial distribution panels
Backup power systems and UPS
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The VT-48100-W photovoltaic battery from V-TAC is an innovative and efficient solution for storing solar energy, perfectly suited for wall mounting. This model offers an impressive rated capacity of 100Ah and a rated energy of 5.12kWh, making it ideal for use in domestic or commercial renewable energy systems.
Key specifications include:
Nominal Capacity: 100Ah at 0.2C, 25°C
Nominal Voltage: 51.2V
Rated Energy: 5.12kWh at 0.2C, 25°C
Charging Voltage: 56.8V
Standard Charging Current: 20A at 25°C
Maximum Continuous Charging Current: 100A at 25°C
Standard Discharge Current: 20A at 25°C
Maximum Continuous Discharge Current: 100A at 25°C
Discharge Cut-off Voltage: 42.0V
Operating Temperature during Charging: 0° to +60°C
Operating Temperature during Discharge: -20° to +60°C
Permissible Humidity: ≤95% RH
Protection: IP20
Built to withstand a variety of operating conditions, the VT-48100-W battery is wall-mounted, saving space and facilitating integration into any environment. It comes with a 10-year warranty, underlining V-TAC’s commitment to quality and long-term reliability. Ideal for those wishing to maximise their energy independence, this battery is an excellent choice for the efficient storage of renewable energy.
✅ Display
✅ Power cables included
✅ CAN/RS485 communication port
✅ Up to 16 units can be connected in parallel
✅ Over 6,000 cycles at 80% DOD
✅ Compatible with most low-voltage inverters
✅ 10-year warranty
Download user manual
Download technical data sheet
Compatibility list
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The lithium iron phosphate (LiFePO4) battery is an energy storage solution used in photovoltaic systems to manage and supply electricity efficiently.
With a capacity of 5.12 kWh, this LiFePO4 battery provides a significant amount of energy that can be stored and released gradually, depending on the needs of the photovoltaic system. The high storage capacity allows it to power household appliances and equipment for several hours or even days, depending on energy consumption.
The LiFePO4 battery offers several advantages. Firstly, it is a battery with a long service life. LiFePO4 technology allows for a large number of charge-discharge cycles without significantly affecting the battery’s performance. This means the battery can be used over a long period of time without the need for frequent replacement.
Secondly, the LiFePO4 battery has high chemical stability, making it safer compared to other types of batteries. There is no risk of explosion or fire, even in the event of overcharging or overheating. This makes it an ideal choice for safety-critical applications.
Furthermore, the LiFePO4 battery is characterised by high charging and discharging efficiency. It has a low self-discharge rate, meaning that the stored energy is retained over a longer period without significant loss. Furthermore, the charging time is relatively short, allowing the battery to recharge quickly when necessary.
In conclusion, the LiFePO4 battery with a capacity of 5.12kWh is a reliable and efficient solution for energy storage in photovoltaic systems. With a long service life, high chemical stability and high efficiency, this battery ensures a constant and safe power supply for equipment and appliances connected to the photovoltaic system, helping to optimise the use of solar energy and reduce dependence on conventional energy sources.
Chemistry: LFP (lithium iron phosphate)
Nominal voltage: 51.2V
Operating voltage: 42V–56.8V
Nominal capacity: 100Ah
Dimensions: 445*400*130mm
Weight: 41kg
Charge/discharge current: 20A
Communication protocol: RS485, CAN
Number of 80% DOD cycles: ≥6000@25°C
Operating temperature: Charge 0°C–60°C / Discharge -20°C–60°C
Connection mode: Single or up to 16 in parallel
✅ Display
✅ Power cables included
✅ CAN/RS485 communication port
✅ Up to 16 units can be connected in parallel
✅ Over 6,000 cycles at 80% DOD
✅ Compatible with most low-voltage inverters
✅ 10-year warranty
Download user manual (RO)
Download technical data sheet
Compatibility list
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download Energy Storage System DatasheetDownload Energy Storage System ManualDownload Certificate of Conformity
The DEYE BOS-B Pro-A3 kit is a modular high-voltage energy storage solution designed for commercial and industrial energy systems. The configuration includes 16 LiFePO4 modules connected in series, providing a total nominal energy of 257.23kWh and 231.51kWh of usable energy, calculated at the recommended 90% depth of discharge.
Each BOS-B-Pack16-A3 module provides a nominal energy of 16.08kWh, a capacity of 314Ah and a nominal voltage of 51.2V. The complete system reaches a nominal voltage of 819.2V and supports a maximum charging or discharging current of 180A.
The system uses the BOS-B-PDU-2-A high-voltage control unit to manage the battery modules, communicate with the PCS and monitor the state of charge and system alarms. Thermal management is provided by intelligent fan cooling.
The BOS-B Pro-A3 is designed for integration into DEYE C&I ESS solutions incorporating PCS, MPPT and STS equipment. The final configuration must be determined according to the system power, on-grid or off-grid operating mode and photovoltaic circuit voltage.
Key Features
LiFePO4 technology
High-voltage system for commercial and industrial applications
16 modules connected in series
257.23kWh total nominal energy
231.51kWh usable energy
819.2V nominal voltage
180A maximum charging and discharging current
TCP, RS485 and CAN communication
CAN communication with the BMS
State-of-charge and error-code display
High-voltage presence indicator
System alarm indicator
Intelligent fan cooling
Rack-mounted installation
IP20 protection rating
10-year warranty
Benefits
High Storage Capacity
The usable energy of 231.51kWh provides substantial energy storage for later consumption, peak-load reduction or maintaining the operation of compatible loads.
Modular Construction
The system uses 16 individual battery modules, simplifying transportation, installation, monitoring and technical servicing.
Integrated Management
The BOS-B-PDU-2-A unit manages the high-voltage connections, communication with compatible equipment and transmission of battery information.
Long Service Life
The manufacturer specifies more than 6,000 cycles under the following conditions: 25±2°C, charging and discharging at 0.5C and a minimum end-of-life remaining capacity of 70%.
Recommended Applications
Commercial and industrial photovoltaic systems
Industrial buildings and manufacturing facilities
Warehouses and logistics centres
Shopping centres and office buildings
Peak-load reduction and peak shaving
Time-of-use energy optimisation
Energy export limitation
Power systems for critical loads
Microgrids and commercial and industrial energy solutions
Kit Contents
16 × BOS-B-Pack16-A3 battery modules, 16.08kWh each
1 × BOS-B-PDU-2-A high-voltage control unit
Rack structures required for the BOS-B Pro-A3 configuration
The PCS, MPPT module, STS module and other equipment presented as part of the C&I ESS solution are not considered included in this kit unless they are listed separately in the commercial offer.
The BOS-B-AP-A cable package is presented by the manufacturer as an accessory for integration with the 125kW PCS. Its inclusion must be confirmed separately.
General Information
Manufacturer
DEYE
System Model
BOS-B Pro-A3
System Type
Modular high-voltage battery system
Battery Technology
LiFePO4
Application
Commercial and industrial energy storage – C&I ESS
BOS-B Pro-A3 System Parameters
Number of Modules Connected in Series
16 modules
Nominal System Energy
257.23kWh
Usable System Energy
231.51kWh
Nominal System Voltage
819.2V
Maximum Charging/Discharging Current
180A
Recommended Depth of Discharge
90%
BOS-B-Pack16-A3 Battery Module
Nominal Energy per Module
16.08kWh
Nominal Voltage per Module
51.2V
Nominal Capacity per Module
314Ah
Maximum Charging/Discharging Current
180A
Module Dimensions – W × D × H
795.9 × 526 × 274.2mm
Approximate Weight per Module
126kg
Module Protection Rating
IP20
Charging Temperature
0°C to +55°C
Discharging Temperature
-20°C to +55°C
Storage Temperature
0°C to +35°C
BOS-B-PDU-2-A High-Voltage Control Unit
Operating Voltage Range
200–1000V DC
Rated Charging/Discharging Current
180A
Operating Temperature
-20°C to +60°C
Protection Rating
IP20
Auxiliary AC Power Supply
220V AC ±10% / 2A
Dimensions – W × D × H
788.6 × 526 × 167.2mm
Weight
32kg
Operation and Communication
Thermal Management
Intelligent fan cooling
Display
State of charge and error codes
Communication Ports
TCP / RS485 / CAN
BMS Communication
CAN
Permissible Humidity
5–85%
Maximum Altitude
≤3000m
System Protection Rating
IP20
Installation Location
Rack-mounted in a suitable indoor environment
Dimensions, Service Life and Certifications
System Dimensions – W × H × D
2150 × 1305 × 800mm
Approximate System Weight
2240kg
Cycle Life
≥6000 cycles at 25±2°C, 0.5C/0.5C and 70% EOL capacity
Warranty
10 years
Referenced Certifications
CE / IEC 62619 / IEC 62040 / UN 38.3
Compatibility and Integration
For a configuration with 16 battery modules, the manufacturer specifies the following options:
16 modules for on-grid or off-grid PCS applications
16 modules in a PCS + MPPT configuration when the MPPT module’s open-circuit voltage does not exceed 800V
For other configurations, the datasheet allows between 5 and 16 modules to be connected in series, with different requirements for on-grid operation, off-grid operation and MPPT module integration.
Compatibility depends on the PCS model, system architecture, MPPT and STS equipment and firmware version. The complete configuration should be checked and designed before purchase.
Important Information
This product is a high-voltage system and must not be treated as a standalone residential battery. Operation requires integration with the PCS and with the protection, control and communication equipment specified in the system design.
The IP20 protection rating requires installation in a dry, ventilated indoor technical area protected against unauthorised access, water, dust and condensation.
The system dimensions, approximate weight of 2240kg and resulting floor load must be considered when preparing the installation site.
The usable energy is calculated at the recommended depth of discharge of 90%. Actual autonomy depends on the power demand of the connected loads, system losses, operating temperature and configured operating limits.
Installation, configuration and commissioning must be carried out by qualified personnel in accordance with the manufacturer’s instructions and all applicable regulations.
