Phoenix
-
Victron Energy Phoenix 48V 375VA Schuko Inverter
The VE.Direct port can be connected to: A computer (requires a VE.Direct to USB cable) Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Dual Bluetooth) Fully configurable: Triggering and resetting low battery voltage alarms Battery voltage cut-off and restart levels Dynamic disconnection: load-dependent cut-off level Output voltage: 210–245 V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO sensitivity level Monitoring: Input and output voltage Charging and alarms Phoenix inverters are part of a range designed for high-quality services, based on advanced SinusMAX photovoltaic technology, with the unique feature of starting at full load. Superior technology – SinusMAX The Phoenix range of inverters has been designed for professional applications and is suitable for a variety of uses. The design focuses on achieving a sinusoidal output with maximum efficiency, without compromising performance. Key features: HF hybrid technology: a compact, lightweight, reliable product capable of supplying power to any type of load. Full-load start-up: ideal for demanding loads such as computers or power tools. VE.Direct communication port: can be connected to computers, smartphones, tablets and other devices, offering flexibility and ease of use. Proven reliability: toroidal transformer technology provides protection against short circuits, overheating and overloads, ensuring long-term reliability. ECO mode: the inverter enters standby mode when the load drops below a preset value, saving energy. If the load exceeds a preset level, it restarts automatically. On/off remote control: a remote control can be connected to a two-pin connector, available on all models. Automatic load transfer to another AC source: for low-power models, we recommend the Filax automatic transfer switch, which ensures a very short transfer time (<20 ms), so that electronic equipment will continue to operate without interruption. Technical specifications: Dimensions: 86 x 165 x 260 mm Weight: 3 kg Power output at 25°C: 375VA Power output at 25°C/40°C: 300/260W Peak power: 700W Output voltage: 230VAC ± 3%, 50Hz or 60Hz ± 0.1% Input voltage range: 36.8–62.0V Low battery voltage alarm: 43.6V Battery power cut-off: 37.2V Self-regeneration battery voltage: 56.0V Maximum efficiency: 90% No-load power: 8.5W Operating temperature range: -40°C to +65°C (fan-cooled) Humidity: max. 95% (non-condensing) Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 4°C
€131,84
-
Victron Energy Phoenix 48V 500VA Schuko Inverter
The VE.Direct port can be connected to: A computer (VE.Direct to USB cable required) Apple and Android smartphones, tablets, MacBooks and other devices (VE.Direct Dual Bluetooth required) Fully configurable: Low battery voltage alarm triggers and reset levels Battery voltage cut-off and battery restart levels Dynamic disconnection: load-dependent cut-off level Output voltage 210–245 V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO sensitivity level Monitoring: Input and output voltage Charging and alarms Phoenix inverters are part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX – featuring the unique ability to start at maximum load. Superior technology – SinusMAX The Phoenix range of inverters, designed for photovoltaic panel systems, is created for professional use and is suitable for a wide range of applications. The design focuses on optimal efficiency without compromising on performance, delivering a high-quality sinusoidal output. Using HF hybrid technology, Phoenix offers a product: High quality Compact in size Lightweight Highly reliable Capable of supplying power for any type of load. Start-up at full load – A unique feature of SinusMAX technology. Wide range of applications Phoenix inverters are recommended for powering demanding loads. They can be integrated into stand-alone photovoltaic kits – independent photovoltaic systems. VE.Direct communication port This can be connected to computers, smartphones (Apple, Android), tablets, MacBooks and other compatible devices. Proven reliability The toroidal transformer design has proven its long-term reliability. Phoenix inverters offer protection against: Short circuits Overload Overheating High ambient temperatures ECO mode In ECO mode, the inverter goes into standby when the load drops below a preset level. After entering standby mode, it activates for a short period (2.5 seconds, factory setting). If the load exceeds the preset level, the inverter remains on. Remote control on/off Can be connected to a two-pin connector, available on all Phoenix models. Automatic transfer switch For low-power models, we recommend using the Filax automatic transfer switch. Filax has a very short transfer time (under 20 milliseconds), allowing computers or electronic equipment to operate without interruption. Technical specifications: Dimensions: 86 x 172 x 275 mm Weight: 3.9 kg AC power output at 25°C: 500VA Power output at 25°C / 40°C: 400 / 350W Peak power: 900W AC output voltage / frequency: 230VAC +/- 3%, 50Hz or 60Hz +/- 0.1% Input voltage: 36.8 - 62.0V Low battery voltage alarm: 43.6V Battery power cut-off: 37.2V Low battery voltage (self-regeneration): 56.0V Maximum efficiency: 91% No-load power consumption: 9W Inverter protection: a - f Operating temperature: -40 to +65°C (with fan) Maximum humidity: 95% (non-condensing) Standards: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
€164,56
-
Victron Energy Phoenix 48/3000 Smart 48V 3000VA Inverter
Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX solar photovoltaic technology, and feature the unique ability to start up at full load. Key features: Built-in Bluetooth: Fully configurable via a tablet or smartphone. Low battery voltage: Integrated functions for low voltage management. Disconnection and restart: Configurable levels for low battery voltage. Dynamic disconnection: Adjustment of the disconnection level according to load. Output voltage: 210–245 V. Frequency: 50 Hz or 60 Hz. ECO mode: Automatic start/stop. Level sensor for ECO mode. Alarm relay. Monitoring: Monitoring of input and output voltage. Load and alarm monitoring. VE.Direct communication port: Allows connection to a computer (VE.Direct to USB interface cable required) for configuration and parameter monitoring. Proven reliability: Complex topology: H-bridge toroidal transformer, demonstrating reliability over the years. The inverters are short-circuit resistant and protected against overheating caused by overload or high ambient temperatures. ECO mode: In ECO mode, the inverter switches to standby when the load falls below a certain preset value. In standby, the inverter starts up every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter remains on. Technical specifications: Dimensions: 485 x 285 x 150 mm Weight: 19 kg AC power output at 25°C: 3000 VA Power output at 25°C / 40°C: 2400 / 2200 W Peak power: 6000 W AC output voltage / frequency: 230 VAC ± 2% 50 Hz ± 0.1% Input voltage range: 37.2–68 V Maximum efficiency: 95% No-load power: 15 W Photovoltaic panel system protection: A - G Operating temperature range: -40 °C to +50 °C (fan-cooled) Humidity (non-condensing): maximum 95% Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
€702,80
-
Victron Energy Phoenix 48/5000 Smart 48V 5000VA Inverter
Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX solar photovoltaic technology, and feature the unique ability to start up at full load. Key features: Built-in Bluetooth: Fully configurable via a tablet or smartphone. Low battery voltage: Integrated functions for low voltage management. Disconnection and restart: Configurable levels for low battery voltage. Dynamic disconnection: Adjustment of the disconnection level according to load. Output voltage: 210–245 V. Frequency: 50 Hz or 60 Hz. ECO mode: Automatic start/stop. Level sensor for ECO mode. Alarm relay. Monitoring: Monitoring of input and output voltage. Load and alarm monitoring. VE.Direct communication port: Allows connection to a computer (VE.Direct to USB interface cable required) for configuration and parameter monitoring. Proven reliability: Complex topology: H-bridge toroidal transformer, demonstrating reliability over the years. The inverters are short-circuit resistant and protected against overheating caused by overload or high ambient temperatures. ECO mode: In ECO mode, the inverter switches to standby when the load falls below a certain preset value. In standby, the inverter starts up every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter remains on. Technical specifications: Maximum power: 10,000 W AC output voltage: 230 V DC input voltage: 37.2–68 V Maximum efficiency: 95% Operating temperature: -40 °C to +50 °C Dimensions: 555 x 295 x 160 mm Weight: 28 kg Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
€1.052,70
-
Victron Energy Phoenix 24V 500VA Inverter with Schuko plug
Phoenix Inverters with SinusMAX Technology – Performance and Reliability VE.Direct Port The VE.Direct communication port offers connectivity with: Computers ( VE.Direct to USB cable required) Apple and Android smartphones, tablets, MacBooks and other devices ( VE.Direct Dual Bluetooth adapter required). Configurable Features Setting low battery voltage alarms and reset levels Adjustment of battery cut-off and restart levels Dynamic load-dependent disconnection Output voltage: 210–245V Frequency: 50Hz or 60Hz ECO mode: enable/disable and sensitivity adjustment Real-time monitoring: input/output voltage, charge status and alarms. SinusMAX technology – Optimised efficiency and performance Phoenix inverters stand out thanks to: SinusMAX technology, specially designed to support start-up at maximum load, ideal for demanding applications. The use of HF hybrid technology to provide a balance between performance and compact dimensions, low weight and high reliability. Recommended for powering sensitive equipment: computers, LED/halogen lamps, low-power electrical tools. ECO Mode and Remote Control In ECO Mode, the inverter automatically switches to standby when the load falls below a preset threshold. It restarts automatically when a higher load is detected. A remote control for switching on/off can be connected to a two-pin connector available on all models. Automatic Load Transfer – Filax Switch For low-power models, the Filax automatic transfer switch is recommended. The transfer time is under 20 milliseconds, ideal for sensitive electronic equipment, with no interruptions. Technical Specifications Dimensions: 86 x 172 x 275 mm Weight: 3.9 kg Rated power at 25°C: 500VA Power at 25°C / 40°C: 400W / 350W Peak power: 900W Output voltage / Frequency: 230VAC ±3%, 50Hz or 60Hz ±0.1% Input voltage: 18.4V – 34V Low battery voltage alarm: 21.8V Cut-off voltage: 18.6V Regeneration voltage: 28V Maximum efficiency: 90% No-load power: 6.5W Operating temperature: -40°C to +65°C (with fan) Humidity: Maximum 95% (non-condensing) Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
€164,56
-
Victron Energy Phoenix 24V 800VA Schuko Inverter
Phoenix Inverters with SinusMAX Technology – Maximum Load Performance Superior Technology – SinusMAX Phoenix inverters in the professional range are designed for photovoltaic applications, offering optimum efficiency without compromising performance. SinusMAX technology allows for start-up at maximum load, making them ideal for powering demanding loads such as computers and low-power electric tools. HF Hybrid Technology Phoenix inverters utilise HF hybrid technology to combine compact dimensions, low weight and increased reliability, delivering consistent power for various types of loads. Advanced Features Full-load start-up: A unique feature of SinusMAX technology, delivering high performance even under heavy loads. Filax automatic transfer switch: Transfer time of less than 20 milliseconds, ideal for computers and other sensitive equipment, which will continue to operate without interruption. Remote on/off control: All models are equipped with a remote control connector, allowing for easy switching of the inverter. LED diagnostics and multiple sockets Phoenix models are equipped with an LED diagnostic system and are available with three types of output sockets for maximum flexibility. Technical Specifications Dimensions: 105 x 216 x 305 mm Weight: 5.5 kg Rated power at 25°C: 800VA Power at 25°C / 40°C: 650W / 560W Peak power: 1500W Output voltage / Frequency: 110VAC or 230VAC ±3%, 50Hz or 60Hz ±0.1% Input voltage: 18.4V – 34V DC Low battery voltage alarm: 21.8V Cut-off voltage: 18.6V Regeneration voltage: 28V Maximum efficiency: 90% No-load power: 7W Operating temperature: -40°C to +65°C (with fan) Humidity: Maximum 95% (non-condensing) Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
€267,64
-
Victron Energy Phoenix 48V 250VA Schuko Inverter
The VE.Direct port can be connected to: A computer (VE.Direct to USB cable required) Apple and Android smartphones, tablets, MacBooks and other devices (VE.Direct Bluetooth required) Fully configurable: Low battery voltage alarm triggers and reset levels Battery voltage cut-off and battery restart levels Dynamic disconnection: load-dependent cut-off level Output voltage: 210–245 V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO sensitivity level Monitoring: Input and output voltage Charging and alarms Phoenix inverters are part of a range designed for high-quality performance, based on superior photovoltaic technology – SinusMAX. This technology allows for start-up at full load. Superior technology – SinusMAX The Phoenix range of inverters is designed for professional use and is suitable for a wide range of applications. The design focuses on optimum efficiency, without compromising on performance. Key features: HF hybrid technology: a compact, reliable product capable of supplying power to any type of load. Full-load start-up: Phoenix inverters are ideal for powering demanding loads. VE.Direct communication port: allows connection to computers, smartphones, tablets and other devices. Proven reliability: thanks to the toroidal transformer, Phoenix inverters offer protection against short circuits, overheating and overloads. ECO mode: in this mode, the inverter enters standby when the load drops below a preset value, saving energy. Remote on/off control: a remote control can be connected to a two-pin connector, available on all models. Automatic transfer switch: recommended for low-power models, the Filax device ensures a very short transfer time, so that electronic equipment will continue to operate without interruption. Technical specifications: Dimensions: 86 x 165 x 260 mm Weight: 2.4 kg Power output at 25°C: 250VA Peak power: 400W Output voltage: 230VAC ± 3%, frequency 50Hz/60Hz Input voltage: 36.8 - 62.0V Maximum efficiency: 88% No-load power: 7.9W Operating temperature range: -40°C to +65°C Maximum humidity: 95% Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
€102,10
-
Victron Energy Phoenix 48V 1200VA Inverter with Schuko plug
The VE.Direct port can be connected to: A computer (VE.Direct to USB cable required) Apple and Android smartphones, tablets, MacBooks and other devices (VE.Direct Dual Bluetooth required) Fully configurable: Low battery voltage alarm triggers and reset levels Battery voltage cut-off and battery restart levels Dynamic disconnection: load-dependent cut-off level Output voltage 210–245 V Frequency: 50 Hz or 60 Hz ECO mode on/off and ECO sensitivity level Monitoring: Input and output voltage Charging and alarms Phoenix inverters are part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX – featuring the unique capability of starting at maximum load. Superior technology – SinusMAX The Phoenix range of inverters, designed for photovoltaic panel systems, is created for professional use and is suitable for a wide range of applications. The design focuses on optimal efficiency without compromising on performance, delivering a high-quality sinusoidal output. Using HF hybrid technology, Phoenix offers a product: High quality Compact in size Lightweight Highly reliable Capable of supplying power for any type of load. Start-up at full load – A unique feature of SinusMAX technology. Wide range of applications Phoenix inverters are recommended for powering demanding loads. They can be integrated into stand-alone photovoltaic kits – independent photovoltaic systems. VE.Direct communication port This can be connected to computers, smartphones (Apple, Android), tablets, MacBooks and other compatible devices. Proven reliability The toroidal transformer design has proven its long-term reliability. Phoenix inverters offer protection against: Short circuits Overload Overheating High ambient temperatures ECO mode In ECO mode, the inverter goes into standby when the load drops below a preset level. After entering standby mode, it activates for a short period (2.5 seconds, factory setting). If the load exceeds the preset level, the inverter remains on. Remote control on/off Can be connected to a two-pin connector, available on all Phoenix models. Automatic transfer switch For low-power models, we recommend using the Filax automatic transfer switch. Filax has a very short transfer time (under 20 milliseconds), allowing computers or electronic equipment to operate without interruption. Technical specifications: Dimensions: 117 x 232 x 327 mm Weight: 7.4 kg AC power output at 25°C: 1200 VA Power output at 25°C / 40°C: 1000 / 850 W Peak power: 2200 W AC output voltage / frequency: 110 VAC or 230 VAC +/- 3%, 50 Hz or 60 Hz +/- 0.1% Input voltage range: 36.8 - 62.0 V Low battery voltage alarm: 43.6 V Battery power cut-off: 37.2 V Low battery voltage (self-regeneration): 56 V Maximum efficiency: 92% Zero-load power: 10 W Photovoltaic panel system inverter protection: IP21 / a - f Operating temperature range: -40 to +65°C (fan-cooled) Maximum humidity (non-condensing): 95% Standards: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
€353,88
-
Victron Energy Phoenix 48/2000 Smart 48V 2000VA Inverter
Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX solar photovoltaic technology, and feature the unique ability to start up at full load. Key features: Built-in Bluetooth: Fully configurable via a tablet or smartphone. Low battery voltage: Integrated functions for low voltage management. Disconnection and restart: Configurable levels for low battery voltage. Dynamic disconnection: Adjustment of the disconnection level according to load. Output voltage: 210–245 V. Frequency: 50 Hz or 60 Hz. ECO mode: Automatic start/stop. Level sensor for ECO mode. Alarm relay. Monitoring: Monitoring of input and output voltage. Load and alarm monitoring. VE.Direct communication port: Allows connection to a computer (VE.Direct to USB interface cable required) for configuration and parameter monitoring. Proven reliability: Complex topology: H-bridge toroidal transformer, demonstrating reliability over the years. The inverters are short-circuit resistant and protected against overheating caused by overload or high ambient temperatures. ECO mode: In ECO mode, the inverter switches to standby when the load falls below a certain preset value. In standby, the inverter starts up every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter remains on. Technical specifications: Dimensions: 485 x 219 x 125 mm Weight: 13 kg AC power output at 25°C: 2000 VA Power output at 25°C / 40°C: 1600 / 1450 W Peak power: 4000 W AC output voltage / frequency: 230 VAC ± 2% 50 Hz or 60 Hz ± 0.1% Input voltage range: 37.2–68 V Maximum efficiency: 94% No-load power: 11 W Photovoltaic panel system protection: A - G Operating temperature range: -40 °C to +50 °C (fan-cooled) Humidity (non-condensing): maximum 95% Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
€494,64
-
Victron Energy Phoenix 24V 250VA Schuko Inverter
Phoenix Inverters with SinusMAX Technology – Performance and Reliability for Professional Applications VE.Direct Port The VE.Direct port allows Phoenix inverters to be connected to a wide range of devices: Computers ( VE.Direct to USB cable required) Apple and Android smartphones, tablets, MacBooks and other devices ( VE.Direct Bluetooth adapter required) Full configuration and monitoring Inverters can be configured to optimise performance: Setting low battery voltage alarms and reset levels Dynamic battery disconnection, depending on load Output voltage adjustment between 210V and 245V Adjustable operating frequency: 50Hz or 60Hz Enabling/disabling and adjusting the sensitivity of ECO mode Real-time monitoring: Input and output voltage Charging and active alarms Superior technology – SinusMAX Phoenix inverters are equipped with SinusMAX technology, optimised for starting at full load. Their design focuses on delivering a high-quality sinusoidal output without compromising efficiency or reliability. Thanks to HF hybrid technology, these inverters are compact, lightweight and ideal for powering demanding loads. Reliability and comprehensive protection Phoenix inverters feature comprehensive protection against short circuits, overloads and overheating. Using a toroidal transformer, these inverters have proven their reliability over time, making them the perfect choice for powering sensitive devices such as computers, power tools and LED or halogen lighting. ECO Mode In ECO Mode, the inverter enters standby mode when the load drops below a preset level, saving energy. Once activated, the inverter periodically checks whether the load exceeds the set threshold, remaining in operation only when necessary. On/Off remote control and automatic transfer switch For low-power models, we recommend using the Filax automatic transfer switch, which has an extremely fast transfer time (under 20 milliseconds). This ensures a seamless transition between AC power sources, maintaining continuous operation of sensitive devices. Technical specifications: Dimensions: 86 x 165 x 260 mm Weight: 2.4 kg Rated power at 25°C: 250VA Power at 25°C/40°C: 200W / 175W Peak power: 400W Output voltage/frequency: 230VAC ±3%, 50Hz or 60Hz ±0.1% Input voltage: 18.4V - 34V Low battery voltage alarm: 21.8V Battery cut-off voltage: 18.6V Battery regeneration voltage: 28V Maximum efficiency: 88% No-load power: 5.2W Operating temperature range: -40°C to +65°C (with fan) Maximum humidity: 95% (non-condensing) Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
€102,10
-
Victron Energy Phoenix 24V 375VA Schuko Inverter
Phoenix Inverters with SinusMAX Technology – Superior Performance and Reliability VE.Direct Port The VE.Direct port allows inverters to be connected to various devices, providing easy access for configuration and monitoring: Computers (requires VE.Direct to USB cable) Smartphones (Apple, Android), tablets, MacBooks and other devices ( VE.Direct Dual Bluetooth adapter required) Fully configurable Setting alarms for low battery voltage and reset levels Adjustment of battery cut-off and restart levels Dynamic load-dependent disconnection Adjustable output voltage: 210–245V Selectable frequency: 50Hz or 60Hz ECO mode: on/off and adjustable sensitivity Real-time monitoring Input and output voltage Charging and alarms SinusMAX Technology – Optimised Efficiency and Performance Phoenix inverters are equipped with SinusMAX technology, designed to handle demanding loads and start-up at full load. Using hybrid HF technology, these inverters offer a perfect balance between performance and efficiency, without compromising reliability. Proven reliability Using a toroidal transformer, Phoenix inverters offer protection against short circuits, overheating and overloading, making them ideal for sensitive devices such as computers, LED lighting or power tools. ECO Mode – Energy Efficiency In ECO Mode, the inverter automatically enters standby when the load drops below a preset value. The inverter will restart automatically when the load exceeds this threshold, thereby saving energy. On/Off Remote Control A two-pin connector allows connection of a remote control for remote on/off operation. Filax Automatic Transfer Switch Recommended for low-power models, this switch offers a transfer time of less than 20 milliseconds, maintaining the continuous operation of electronic equipment without interruption. Technical Specifications: Dimensions: 86 x 165 x 260 mm Weight: 3 kg Rated power at 25°C: 375VA Power at 25°C / 40°C: 300W / 260W Peak power: 700W Output voltage / frequency: 230VAC ±3%, 50Hz or 60Hz ±0.1% Input voltage: 18.4V – 34V Low battery voltage alarm: 21.8V Battery cut-off voltage: 18.6V Battery regeneration voltage: 28V Maximum efficiency: 89% No-load power: 6.1W Protections: Short-circuit, overcharge and overheating protection Operating temperature: -40°C to +65°C (with fan) Maximum humidity: 95% (non-condensing) Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
€131,84
-
Victron Energy Phoenix 24/1600 Smart 24V 1600VA Inverter
Phoenix Inverters – SinusMAX Technology Phoenix inverters form part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX. These inverters are distinguished by their unique full-load start-up feature. Key features: Built-in Bluetooth: Fully configurable via a tablet or smartphone. Low battery voltage Low battery voltagecut-off and restart levels. Dynamic disconnection: disconnection level depending on load. Output voltage: 210–245 V. Frequency: 50 Hz or 60 Hz. ECO mode: start/stop and level sensor for ECO mode. Alarm relay. Monitoring: Input and output voltage Load Alarms VE.Direct communication port The VE.Direct port allows connection to a computer (VE.Direct to USB interface cable required) for configuration and monitoring of parameters. Proven reliability The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and protected against overheating caused by overload or high ambient temperatures. ECO mode In ECO mode, the inverter switches to standby mode when the load falls below a preset value. In standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on. Technical specifications: Dimensions: 485 x 219 x 125 mm Weight: 12 kg AC power output at 25°C: 1600 VA Power output at 25°C / 40°C: 1300 / 1200 W Peak power: 3000 W AC output voltage / frequency: 230 VAC +/- 2%, 50 Hz +/- 0.1% Input voltage range: 18.6 - 34 V Maximum efficiency: 94% No-load power: 9 W Photovoltaic panel system inverter protection: a - g Operating temperature range: -40 to +50 °C (fan-cooled) Humidity (non-condensing): maximum 95% Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-2 / IEC 61000-6-3
€568,98
-
Victron Energy Phoenix 24/2000 Smart 24V 2000VA Inverter
Phoenix Inverters – SinusMAX Technology Phoenix inverters form part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX. These inverters are distinguished by their unique full-load start-up feature. Key features: Built-in Bluetooth: Fully configurable via a tablet or smartphone. Low battery voltage Low battery voltagecut-off and restart levels. Dynamic disconnection: disconnection level depending on load. Output voltage: 210–245 V. Frequency: 50 Hz or 60 Hz. ECO mode: start/stop and level sensor for ECO mode. Alarm relay. Monitoring: Input and output voltage Load Alarms VE.Direct communication port The VE.Direct port allows connection to a computer (VE.Direct to USB interface cable required) for configuration and monitoring of parameters. Proven reliability The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and protected against overheating caused by overload or high ambient temperatures. ECO mode In ECO mode, the inverter switches to standby mode when the load falls below a preset value. In standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on. Technical specifications: Dimensions: 485 x 219 x 125 mm Weight: 13 kg AC power output at 25°C: 2000 VA Power output at 25°C / 40°C: 1600 / 1450 W Peak power: 4000 W AC output voltage / frequency: 230 VAC +/- 2%, 50 Hz +/- 0.1% Input voltage range: 18.6 - 34 V Maximum efficiency: 94% No-load power: 9 W Photovoltaic panel system inverter protection: a - g Operating temperature range: -40 to +50 °C (fan-cooled) Humidity (non-condensing): maximum 95% Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-2 / IEC 61000-6-3
€678,02
-
Victron Energy Phoenix 24/3000 Smart 24V 3000VA Inverter
Phoenix Inverters – SinusMAX Technology Phoenix inverters form part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX. These inverters are distinguished by their unique full-load start-up feature. Key features: Built-in Bluetooth: Fully configurable via a tablet or smartphone. Low battery voltage Low battery voltagecut-off and restart levels. Dynamic disconnection: disconnection level depending on load. Output voltage: 210–245 V. Frequency: 50 Hz or 60 Hz. ECO mode: start/stop and level sensor for ECO mode. Alarm relay. Monitoring: Input and output voltage Load Alarms VE.Direct communication port The VE.Direct port allows connection to a computer (VE.Direct to USB interface cable required) for configuration and monitoring of parameters. Proven reliability The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and protected against overheating caused by overload or high ambient temperatures. ECO mode In ECO mode, the inverter switches to standby mode when the load falls below a preset value. In standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on. Technical specifications: Dimensions: 485 x 285 x 150 mm Weight: 19 kg AC power output at 25°C: 3000 VA Power output at 25°C / 40°C: 2400 / 2200 W Peak power: 6000 W AC output voltage / frequency: 230 VAC +/- 2%, 50 Hz +/- 0.1% Input voltage range: 18.6 - 34 V Maximum efficiency: 94% No-load power: 13 W Photovoltaic panel system inverter protection: a - g Operating temperature range: -40 to +50 °C (fan-cooled) Humidity (non-condensing): maximum 95% Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
€912,94
-
Victron Energy Phoenix 12V 250VA Schuko Inverter
VE.Direct port: The VE.Direct port allows connection to: A computer (requires a VE.Direct to USB cable) Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth module with Dual Bluetooth) Available settings: Alarms for low battery voltage and reset levels Battery cut-off and restart voltage Dynamic disconnection: load-dependent adjustment Output voltage: 210V – 245V Frequency: 50Hz or 60Hz ECO mode: on/off and adjustable sensitivity level Parameter monitoring: input and output voltage, charge level and alarms Superior SinusMAX technology: Phoenix inverters are designed for professional use, based on innovative SinusMAX technology. This technology allows for start-up at full load, delivering high performance without compromising on efficiency. Utilising HF hybrid technology, these inverters are compact, lightweight, extremely reliable and capable of handling any type of load. Reliability and performance: The toroidal transformer design has proven its reliability over the years. Phoenix inverters offer protection against short circuits, overloads, overheating and high ambient temperatures. Starting at full load is a unique feature, making these inverters ideal for powering sensitive equipment such as computers, LEDs, halogen lamps or low-power electrical tools. ECO Mode: In ECO Mode, the inverter enters standby when the load drops below a preset threshold. In standby mode, it will switch on periodically to check the load (the default setting is 2.5 seconds). If the load exceeds the preset threshold, the inverter remains switched on. Remote on/off control: All models allow the connection of a remote control to switch the inverter on/off via a two-pin connector. Automatic transfer switch (Filax): For low-power models, we recommend using the Filax automatic transfer switch, which offers an extremely short transfer time (under 20 milliseconds), ensuring the continuous operation of electronic equipment. Technical specifications: Dimensions: 86 x 165 x 260 mm Weight: 2.4 kg Rated power (at 25°C): 250VA Power at 25°C/40°C: 200W / 175W Peak power: 400W Output voltage: 230VAC ± 3%, 50Hz or 60Hz ± 0.1% Input voltage: 9.2V – 17V Low voltage alarm: 10.9V Battery cut-off protection: 9.3V Low battery voltage recovery: 14.0V Maximum efficiency: 87% No-load power consumption: 4.2W Protections: short circuit, overcurrent, overtemperature, overheating Operating temperature: -40°C to +65°C (with ventilation) Maximum humidity (non-condensing): 95% Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
€92,20
-
Victron Energy Phoenix 12V 375VA Schuko Inverter
VE.Direct communication port: Compatible with: Computers (requires VE.Direct to USB cable) Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Dual module) Fully configurable features: Alarm triggers for low battery voltage and reset levels Setting battery cut-off and restart levels Dynamic disconnection: load-dependent cut-off adjustment Output voltage adjustable between 210V and 245V Selectable frequency: 50 Hz or 60 Hz ECO mode: enable/disable and sensitivity adjustment Monitoring of input and output voltage, load level and alarms Superior SinusMAX technology: Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX technology. This offers a unique full-load start-up feature, enabling the power supply of devices requiring high current at start-up, without compromising efficiency or performance. Compact design and high reliability: Thanks to HF hybrid technology, Phoenix inverters are compact, lightweight and extremely reliable, capable of handling a wide range of loads, from sensitive equipment to power tools. The toroidal transformer design has proven its reliability over the years, offering protection against short circuits, overheating, overloads and high temperatures. Full-load start-up: SinusMAX technology enables full-load start-up, a feature rarely found in other high-frequency inverters. This makes Phoenix inverters ideal for powering demanding loads, such as computers, LED and halogen lamps, or low-power power tools. ECO mode: In ECO mode, the inverter automatically enters standby when the load drops below a preset level. In this standby mode, the inverter starts up periodically (default setting of 2.5 seconds) to monitor the load. If the load exceeds a certain threshold, the inverter will remain switched on. Remote on/off: All Phoenix inverter models allow the connection of a remote control for start and stop control via a two-pin connector. Automatic transfer switch (Filax): For low-power models, we recommend using the Filax automatic transfer switch, which ensures an extremely short transfer time (under 20 milliseconds). This allows electronic equipment, such as computers, to operate without interruption. Technical specifications: Dimensions: 86 x 165 x 260 mm Weight: 3 kg Power output at 25°C: 375VA Rated power at 25°C / 40°C: 300W / 260W Peak power: 700W Output voltage: 230VAC ± 3%, frequency 50Hz or 60Hz ± 0.1% Input voltage: 9.2V - 17V Low voltage alarm: 10.9V Battery power cut-off: 9.3V Low battery voltage recovery: 14.0V Maximum efficiency: 89% No-load power consumption: 5.6W Protection against short circuit, overcurrent, overtemperature Operating temperature range: -40°C to +65°C (ventilated) Maximum humidity: 95% (non-condensing) Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
€118,96
-
Victron Energy Phoenix 12V 500VA Schuko Inverter
VE.Direct port: Compatible with: Computer (requires VE.Direct to USB cable) Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Dual module) Configurable features: Alarms for low battery voltage and reset Settings for battery shutdown and restart Dynamic load-dependent disconnection Output voltage adjustable between 210V and 245V Frequency: 50Hz or 60Hz ECO mode on/off and adjustable sensitivity Monitoring of input and output voltage, charging and alarms SinusMAX technology: Phoenix inverters use advanced SinusMAX technology, offering full-load start-up, ideal for equipment requiring high-current start-up. Reliability and Performance: Toroidal transformer design for superior reliability Protection against short circuits, overloads and overheating Compatible with demanding loads: computers, LED/halogen lamps, power tools Smart ECO Mode: The inverter automatically switches to standby when the load drops below a preset level and resumes operation when the load increases. On/Off Remote Control: Remote control option for remote operation, connectable to a two-pin connector. Automatic Transfer Switch (Filax): Very short transfer time (under 20 ms) to ensure uninterrupted operation of sensitive equipment, such as computers. Technical Specifications: Dimensions: 86 x 172 x 275 mm Weight: 3.9 kg Power output (25°C): 500VA Rated power (25°C/40°C): 400W / 350W Peak power: 900W Output voltage/frequency: 230VAC ± 3%, 50Hz or 60Hz ± 0.1% Input voltage: 9.2V - 17V Low battery voltage alarm: 10.9V Battery cut-off: 9.3V Battery voltage recovery: 14.0V Maximum efficiency: 90% Power consumption at no load: 6W Protections: short circuit, overload, overtemperature Operating temperature range: -40°C to +65°C (with fan) Maximum humidity: 95% (non-condensing) Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
€148,70
-
Victron Energy Phoenix 12V 800VA Schuko Inverter
VE.Direct port: Compatible with: Computer (requires VE.Direct to USB cable) Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Dual module) Configurable features: Alarms for low battery voltage and reset Settings for battery shutdown and restart Dynamic load-dependent disconnection Output voltage adjustable between 210V and 245V Frequency: 50Hz or 60Hz ECO mode on/off and adjustable sensitivity Monitoring of input and output voltage, charging and alarms SinusMAX technology: Phoenix inverters use advanced SinusMAX technology, offering full-load start-up, ideal for equipment requiring high-current start-up. Reliability and Performance: Toroidal transformer design for superior reliability Protection against short circuits, overloads and overheating Compatible with demanding loads: computers, LED/halogen lamps, power tools Smart ECO Mode: The inverter automatically switches to standby when the load drops below a preset level and resumes operation when the load increases. On/Off Remote Control: Remote control option for remote operation, connectable to a two-pin connector. Automatic Transfer Switch (Filax): Very short transfer time (under 20 ms) to ensure uninterrupted operation of sensitive equipment, such as computers. Technical Specifications: Dimensions: 86 x 172 x 275 mm Weight: 3.9 kg Power output (25°C): 500VA Rated power (25°C/40°C): 400W / 350W Peak power: 900W Output voltage/frequency: 230VAC ± 3%, 50Hz or 60Hz ± 0.1% Input voltage: 9.2V - 17V Low battery voltage alarm: 10.9V Battery cut-off: 9.3V Battery voltage recovery: 14.0V Maximum efficiency: 90% Power consumption at no load: 6W Protections: short circuit, overload, overtemperature Operating temperature range: -40°C to +65°C (with fan) Maximum humidity: 95% (non-condensing) Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
€240,88
-
Victron Energy Phoenix 24V 1200VA Inverter with Schuko plug
Phoenix Inverters with SinusMAX Technology – Superior Performance for Photovoltaic Applications Cutting-edge technology – SinusMAX SinusMAX technology is a benchmark in the photovoltaic sector thanks to its unique ability to start at full load, offering an ideal solution for applications requiring a high level of reliability. Phoenix inverters in this range are designed for professional use and are perfect for use with 24V photovoltaic kits. Designed for Professional Performance These inverters have been designed to deliver a clean and efficient sinusoidal output without compromise. HF hybrid technology enables compact dimensions, low weight and superior reliability, making them suitable for powering a wide range of loads, from sensitive equipment to high-consumption loads. Key Features Full-Load Start-up: SinusMAX technology ensures exceptional performance, even at high loads. This makes Phoenix inverters ideal for powering computers, low-power electric tools and other demanding loads. Filax Automatic Transfer Switch: Recommended for low-power models, Filax has a transfer time of under 20 milliseconds, ensuring uninterrupted operation of sensitive electronic equipment such as computers. LED Diagnostics and Multiple Output Sockets: Phoenix models are equipped with an LED diagnostic system and offer multiple types of output sockets for maximum flexibility. On/Off Remote Control: Available on all models, it allows easy control of the inverter via a remote control. Technical Specifications Dimensions: 117 x 232 x 327 mm Weight: 7.4 kg Rated power at 25°C: 1200VA Power at 25°C / 40°C: 1000W / 850W Peak power: 2200W Output voltage / Frequency: 110VAC or 230VAC ±3%, 50Hz or 60Hz ±0.1% Input voltage: 18.4V – 34V Low battery voltage alarm: 21.8V Battery cut-off voltage: 18.6V Regeneration voltage: 28V Maximum efficiency: 91% No-load power consumption: 8W Protection: IP20 / a-f Operating temperature range: -40°C to +65°C (with active cooling) Humidity: Maximum 95% (non-condensing) Standards: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
€337,02
-
Victron Energy Phoenix 12/2000 Smart 12V 2000VA Inverter
Built-in Bluetooth Fully configurable via a tablet or smartphone. This feature allows users to monitor and configure the inverters with ease. Monitoring and configuration functions: Low battery voltage Low batterycut-off and restart levels Dynamic disconnection: disconnection level depending on load Output voltage: 210–245 V Frequency: 50 Hz or 60 Hz ECO mode: start/stop and level sensor for ECO mode Alarm relay Monitoring: Input and output voltage Load Alarms VE.Direct communication port The VE.Direct port allows connection to a computer (via a VE.Direct to USB interface cable) to configure and monitor the same parameters. Proven reliability The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and are protected against overheating caused by overload or high ambient temperatures. ECO mode When activated, the inverter switches to standby mode when the load falls below a preset value. In standby mode, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on. Technical specifications: Maximum power: 4000 W AC output voltage: 230 V Input voltage: 9.3–17 V DC Maximum efficiency: 92% Operating temperature: -40 to +50 °C Dimensions: 485 x 219 x 125 mm Weight: 13 kg
€644,30
-
Victron Energy Phoenix 12/3000 Smart 12V 3000VA Inverter
Built-in Bluetooth Fully configurable via a tablet or smartphone. This feature allows users to monitor and configure the inverters with ease. Monitoring and configuration functions: Low battery voltage Low batterycut-off and restart levels Dynamic disconnection: disconnection level depending on load Output voltage: 210–245 V Frequency: 50 Hz or 60 Hz ECO mode: start/stop and level sensor for ECO mode Alarm relay Monitoring: Input and output voltage Load Alarms VE.Direct communication port The VE.Direct port allows connection to a computer (via a VE.Direct to USB interface cable) to configure and monitor the same parameters. Proven reliability The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and are protected against overheating caused by overload or high ambient temperatures. ECO mode When activated, the inverter switches to standby mode when the load falls below a preset value. In standby mode, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on. Technical specifications: Maximum power: 6000 W AC output voltage: 230 V Input voltage: 9.3–17 V DC Maximum efficiency: 93% Operating temperature: -40 to +50 °C Dimensions: 533 x 285 x 150 mm Weight: 19 kg
€867,34
-
Victron Energy Phoenix 12/1600 Smart 12V 1600VA Inverter
Built-in Bluetooth Fully configurable via a tablet or smartphone. This feature allows users to monitor and configure the inverters with ease. Monitoring and configuration functions: Low battery voltage Low battery voltagecut-off and restart levels Dynamic disconnection: disconnection level depending on load Output voltage: 210–245 V Frequency: 50 Hz or 60 Hz ECO mode: start/stop and level sensor for ECO mode Alarm relay Monitoring: Input and output voltage Load Alarms VE.Direct communication port The VE.Direct port allows connection to a computer (via a VE.Direct to USB interface cable) to configure and monitor the same parameters. Proven reliability The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and are protected against overheating caused by overload or high ambient temperatures. ECO mode When activated, the inverter switches to standby mode when the load falls below a preset value. In standby mode, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on. Technical specifications: Maximum power: 3000 W AC output voltage: 230 V Input voltage: 9.3–17 V DC Maximum efficiency: 92% Operating temperature: -40 to +50 °C Dimensions: 485 x 219 x 125 mm Weight: 12 kg
€568,98
-
Victron Energy Phoenix C 12/1200 12V 1200VA Inverter
Superior technology – SinusMAX When it comes to solar photovoltaic technology, SinusMAX represents superior technology, thanks to which the system starts up at maximum load. Within the range of inverters for photovoltaic panels, the Phoenix range of inverters stands out because they are designed for professional use. Designed for professional use, the Phoenix range of inverters for photovoltaic panel systems is suitable for a wide range of applications. The design criteria focus on creating a sinusoidal output inverter with optimum efficiency, without compromising on performance. Using HF hybrid technology, a high-quality product has been created, featuring compact dimensions, low weight, high reliability and the ability to supply power for any type of load. Full-load start-up A unique feature of SinusMax technology is start-up at full load. Conventional high-frequency technology does not offer such high performance. However, Phoenix inverters are ideally suited for powering demanding loads, such as refrigeration compressors, electric motors or similar devices. Transferring the load to another AC source: automatic transfer switch If an automatic transfer switch is required, we recommend using the MultiPlus inverter/charger. The switch is included in these products, and the MultiPlus’s charging function can be disabled. Computers or other electronic equipment will continue to operate without interruption as the MultiPlus features a very short transfer time (less than 20 milliseconds). LED diagnostics and available with three different output sockets On/off remote control The remote control connector is available on all models. Selected technical specifications: Dimensions: 375x214x110 mm; Weight: 10 kg; AC power output at 25°C: 1200VA; Power output at 25°C / 40°C: 1000 / 900W; Peak power: 2400W; AC output voltage / frequency: 230VAC +/- 2% 50Hz +/- 0.1% Input voltage range: 9.5–17 V; Maximum efficiency: 92%; No-load power: 8W; Photovoltaic panel system inverter protection: a - g; Operating temperature range: -40 to +65°C (fan-cooled); Humidity (non-condensing): maximum 95%; Standards: EN 60335-1 / EN 55014-1 / EN 55014-2;
€414,34
-
Victron Energy Phoenix C 12/2000 12V 2000VA Inverter
Phoenix inverters form part of a range designed for high-quality service, based on superior photovoltaic solar technology – SinusMAX – with the unique feature of starting at full load. Superior technology – SinusMAX Designed for professional use, the Phoenix range of inverters for photovoltaic panel systems is suitable for a wide range of applications. The design criteria focus on creating an inverter with a sinusoidal output and optimum efficiency, without compromising on performance. Using HF hybrid technology, a high-quality product has been created, featuring compact dimensions, low weight, high reliability and the ability to supply power to any type of load. A unique feature of SinusMax technology is the ability to start at full load. Selected technical specifications: AC power at 25°C (VA) 2000; Maximum power (W) 4000; AC output voltage (V) 230; Input voltage (V DC) 9.5–17; Maximum efficiency (%) 92; Operating temperature -40 to +65°C; Dimensions (mm) 520 x 255 x 125; Weight (kg) 12;
€669,10
You have seen 24 out of 30 products