10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE SUN-25K-SG01HP3-EU-AM2 hybrid inverter is a high-performance three-phase solution for large-scale commercial and industrial photovoltaic systems. With a power output of 25 kW, hybrid functionality and two MPPT trackers, this inverter ensures the efficient integration of solar energy, smart battery storage and a constant supply to consumers. It is ideal for prosumers and businesses looking to optimise their energy consumption and reduce their reliance on the grid.
Key technical data
Nominal output power: 25,000 W (25 kW)
Max. apparent AC power: 27,500 VA
Max. AC output current: 40 A
Number of MPPT channels: 2
Photovoltaic input voltage: up to 1,000 V
PV input current per tracker: 37.5 A
Max. PV input power: 32,000 W
Recommended PV input power: 24,000 W
Maximum efficiency: 97.6%
European efficiency: 97%
Protection rating: IP65 (dust and water resistant)
Weight: 90.5 kg
Dimensions: 408×638×237 mm (excluding connectors and brackets)
Connections: RS485 / RS232 / CAN, monitoring via GPRS/Wi-Fi/Bluetooth/4G
Key benefits
High power output of 25 kW – ideal for commercial and industrial applications.
Hybrid functionality – manages both solar generation and battery energy storage.
High efficiency (97.6%) – for minimal energy loss.
2 independent MPPT trackers – maximises output by adapting to different panel orientations and tilt angles.
Extensive compatibility – support for a wide range of Li-ion batteries.
Integrated protections – overvoltage, overcurrent, short-circuit, thermal protection and islanding detection.
Smart communication – via Wi-Fi, Bluetooth or GPRS for remote monitoring.
Robust IP65 construction – suitable for outdoor conditions.
Easy installation and maintenance – compact design and intuitive interface.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel function
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without high-voltage batteries
✅ 32,000W input from solar panels
✅ 25kW three-phase output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download EN user manual
Download the certificate of conformity
The inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by a diesel generator to ensure an uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by a diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE 80kW Hybrid Inverter, 6xMPPT, SUN-80K-SG02HP3-EU HV is the ideal solution for large-scale commercial and industrial applications. With 6 independent MPPT trackers, compatibility with high-voltage batteries and parallel connection capability, this inverter offers maximum flexibility and efficiency in any advanced photovoltaic system, whether on-grid or off-grid.
Compatible with 160–1000V LiFePO4 batteriesAlso works with diesel generatorsCompact design, IP65 – easy indoor or outdoor installationIntegration with monitoring systems: RS485 / CAN / WiFi / LAN / 4G (optional)
Key features:
Nominal AC power (grid): 80,000W
Maximum photovoltaic panel power: 160,000W
Number of MPPT: 6 independent trackers
PV operating voltage: 150 – 850V DC
HV battery compatibility: 160 – 1,000V DC
Battery charge/discharge current: 160A
Output voltage: 3-phase / 400V
Max. efficiency: 97.6%
Cooling: fan-cooled (intelligently controlled)
Dimensions: 606 × 927 × 314 mm
Weight: 97.5 kg
Protection rating: IP65 – suitable for outdoor use
Advanced features:
Up to 10 inverters can operate in parallel
Supports off-grid and backup operation (active phase L1)
Support for installation in self-consumption or grid-feed-in systems
Extensive communication: RS485 / CAN / WiFi / LAN / 4G (optional)
Compatible with EMS (Energy Management System)
Integrated protections:
Reverse polarity protection
AC/DC short-circuit protection
Residual current monitoring (RCD)
Type II overvoltage protection (AC and DC)
Anti-islanding protection and grid detection
Arc fault protection (optional)
The DEYE Hybrid 80kW, 6xMPPT, SUN-80K-SG02HP3-EU HV inverter is ideal for commercial, industrial or large prosumer applications. It can be integrated with high-capacity storage solutions, operates stably in any operating mode and delivers excellent performance in all seasons.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Deye 5kW inverter + 5.12kWh storageunit , model RW-F5.3-1H3, is a complete, ready-to-install photovoltaic solution . The system comprises a 5kW single-phase hybrid inverter and a 5.12kWh LiFePO₄ storage unit , pre-assembled into a compactvertical unit .
It is ideal for homes seeking energyindependence , high efficiency and uninterrupted power supply , even in the event of powercuts .
See also: Complete photovoltaic kits – SolarTech
Technicalspecifications :
Invertermodel :RW-F5.3-1H3
Inverterpower : 5,000 W (5 kW)
Invertertype :Single-phase hybrid
Storagecapacity : 5.12 kWh (LiFePO₄)
Nominal voltage of storageunit : 51.2 V
MaximumPV voltage : 600 Vdc
Number ofMPPTtrackers : 2
Maximum inputcurrent : 14 A / 14 A
Inverterefficiency : up to 97.6%
UPSswitching time :≤10 ms
Communication: RS485 / CAN / Wi-Fi / Bluetooth
Total systemweight :71 kg
Dimensions: 616x 690 x 191 mm
Protectionrating : IP65 (for outdoor/indooruse )
Keyfeatures :
Plug & Play – pre-assembled system , ready for installation
IntegratedLiFePO₄ storage unit – lifespan≥6000 cycles
2 MPPTinverter – optimised performance even in shadedconditions
Rapidbackup system (UPS) – ensures instant power supply in the event of an outage
Compactdesign – suitable for small spaces , can also be installed indoors
Real-timemonitoring – mobile app and onlineplatform
Scalability – option to add additionalstorage units (with compatibleequipment )
Installation and use:
The Deye 5kW inverter + 5.12kWh storage unitis quick and easy to install , with all main connections pre-configured. It requires only:
Wallmounting (or floor mounting with a stand)
Connection to solarpanels
Connection to the grid and consumers
Advantages of the All-in-Onesystem :
Deye 5kW inverter + integrated 5.12kWhstorage – all ina single unit
Instantbackup in the event of a powercut (UPS≤10 ms)
Real-timemonitoring via mobileapp
Compactvertical design , ideal for smallspaces
LiFePO₄technology – over 6 ,000 chargecycles
Quickinstallation – pre-configuredconnections
All-in-One system featuring a 5kW Deye inverter and 5.12kWh LiFePO₄ battery storage , ideal for self-consumption, backup power and residential applications . Compact design , high efficiency and quickinstallation .
Download the technical data sheet
Download the manual
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This 5-metre cable for Deye micro-inverters is designed to provide a stable and secure connection within photovoltaic systems. Ideal for professional installations, the cable ensures efficient power transmission between the solar panels and the inverter, contributing to the optimal performance of your green energy generation system.
Key features:
Length: 5 metres, ideal for installation flexibility
Compatibility: Specially designed for Deye micro-inverters
Durability: High-quality materials, resistant to harsh weather conditions
Secure connection: Reduces energy loss and ensures consistent operation
Easy to install: Ideal for both professional and DIY installers
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Quattro offers a wide range of advanced features.
The Quattro-II has two AC inputs (AC-in-1 and AC-in-2) for connecting two independent power sources. For example, two generators or a mains supply and a generator. The Quattro automatically selects the input to which power is present.
If power is present at both inputs, the Quattro-II selects the AC-in-1 input to which the generator is normally connected.
Automatic and uninterrupted switching
In the event of a power failure or when the generator set is switched off, the Quattro-II will switch to inverter operation and take over the power supply to the connected devices. This happens so quickly that the operation of computers and other electronic devices is not disrupted (continuous power supply or UPS functionality). This makes the Quattro-II very suitable as an emergency power supply system in industrial and telecommunications applications,
Product details
PowerControl & PowerAssist
Yes
Transfer switch
50A
Maximum AC input current
50A
Continuous output power at 25°C
5000VA
Maximum power
9000W
Maximum efficiency %
96
Maximum battery charging current
70A
Battery temperature sensor
Yes
Programmable relay
Yes
Operating temperature range
from -40 to +65°C (fan-assisted cooling)
Degree of protection
IP22
Weight
30 kg
Dimensions (H x W x D) mm
560 x 328 x 148
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The VE.Direct port can be connected to:
A computer (requires a VE.Direct to USB cable)
Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Dual Bluetooth)
Fully configurable:
Triggering and resetting low battery voltage alarms
Battery voltage cut-off and restart levels
Dynamic disconnection: load-dependent cut-off level
Output voltage: 210–245 V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO sensitivity level
Monitoring:
Input and output voltage
Charging and alarms
Phoenix inverters are part of a range designed for high-quality services, based on advanced SinusMAX photovoltaic technology, with the unique feature of starting at full load.
Superior technology – SinusMAX
The Phoenix range of inverters has been designed for professional applications and is suitable for a variety of uses. The design focuses on achieving a sinusoidal output with maximum efficiency, without compromising performance.
Key features:
HF hybrid technology: a compact, lightweight, reliable product capable of supplying power to any type of load.
Full-load start-up: ideal for demanding loads such as computers or power tools.
VE.Direct communication port: can be connected to computers, smartphones, tablets and other devices, offering flexibility and ease of use.
Proven reliability: toroidal transformer technology provides protection against short circuits, overheating and overloads, ensuring long-term reliability.
ECO mode: the inverter enters standby mode when the load drops below a preset value, saving energy. If the load exceeds a preset level, it restarts automatically.
On/off remote control: a remote control can be connected to a two-pin connector, available on all models.
Automatic load transfer to another AC source: for low-power models, we recommend the Filax automatic transfer switch, which ensures a very short transfer time (<20 ms), so that electronic equipment will continue to operate without interruption.
Technical specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 3 kg
Power output at 25°C: 375VA
Power output at 25°C/40°C: 300/260W
Peak power: 700W
Output voltage: 230VAC ± 3%, 50Hz or 60Hz ± 0.1%
Input voltage range: 36.8–62.0V
Low battery voltage alarm: 43.6V
Battery power cut-off: 37.2V
Self-regeneration battery voltage: 56.0V
Maximum efficiency: 90%
No-load power: 8.5W
Operating temperature range: -40°C to +65°C (fan-cooled)
Humidity: max. 95% (non-condensing)
Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
4°C
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The VE.Direct port can be connected to:
A computer (VE.Direct to USB cable required)
Apple and Android smartphones, tablets, MacBooks and other devices
(VE.Direct Dual Bluetooth required)
Fully configurable:
Low battery voltage alarm triggers and reset levels
Battery voltage cut-off and battery restart levels
Dynamic disconnection: load-dependent cut-off level
Output voltage 210–245 V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO sensitivity level
Monitoring:
Input and output voltage
Charging and alarms
Phoenix inverters are part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX – featuring the unique ability to start at maximum load.
Superior technology – SinusMAX
The Phoenix range of inverters, designed for photovoltaic panel systems, is created for professional use and is suitable for a wide range of applications.
The design focuses on optimal efficiency without compromising on performance, delivering a high-quality sinusoidal output.
Using HF hybrid technology, Phoenix offers a product:
High quality
Compact in size
Lightweight
Highly reliable
Capable of supplying power for any type of load.
Start-up at full load – A unique feature of SinusMAX technology.
Wide range of applications
Phoenix inverters are recommended for powering demanding loads. They can be integrated into stand-alone photovoltaic kits – independent photovoltaic systems.
VE.Direct communication port
This can be connected to computers, smartphones (Apple, Android), tablets, MacBooks and other compatible devices.
Proven reliability
The toroidal transformer design has proven its long-term reliability.
Phoenix inverters offer protection against:
Short circuits
Overload
Overheating
High ambient temperatures
ECO mode
In ECO mode, the inverter goes into standby when the load drops below a preset level.
After entering standby mode, it activates for a short period (2.5 seconds, factory setting). If the load exceeds the preset level, the inverter remains on.
Remote control on/off
Can be connected to a two-pin connector, available on all Phoenix models.
Automatic transfer switch
For low-power models, we recommend using the Filax automatic transfer switch.
Filax has a very short transfer time (under 20 milliseconds), allowing computers or electronic equipment to operate without interruption.
Technical specifications:
Dimensions: 86 x 172 x 275 mm
Weight: 3.9 kg
AC power output at 25°C: 500VA
Power output at 25°C / 40°C: 400 / 350W
Peak power: 900W
AC output voltage / frequency: 230VAC +/- 3%, 50Hz or 60Hz +/- 0.1%
Input voltage: 36.8 - 62.0V
Low battery voltage alarm: 43.6V
Battery power cut-off: 37.2V
Low battery voltage (self-regeneration): 56.0V
Maximum efficiency: 91%
No-load power consumption: 9W
Inverter protection: a - f
Operating temperature: -40 to +65°C (with fan)
Maximum humidity: 95% (non-condensing)
Standards: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX solar photovoltaic technology, and feature the unique ability to start up at full load.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage: Integrated functions for low voltage management.
Disconnection and restart: Configurable levels for low battery voltage.
Dynamic disconnection: Adjustment of the disconnection level according to load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode:
Automatic start/stop.
Level sensor for ECO mode.
Alarm relay.
Monitoring:
Monitoring of input and output voltage.
Load and alarm monitoring.
VE.Direct communication port:
Allows connection to a computer (VE.Direct to USB interface cable required) for configuration and parameter monitoring.
Proven reliability:
Complex topology: H-bridge toroidal transformer, demonstrating reliability over the years.
The inverters are short-circuit resistant and protected against overheating caused by overload or high ambient temperatures.
ECO mode:
In ECO mode, the inverter switches to standby when the load falls below a certain preset value. In standby, the inverter starts up every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter remains on.
Technical specifications:
Dimensions: 485 x 285 x 150 mm
Weight: 19 kg
AC power output at 25°C: 3000 VA
Power output at 25°C / 40°C: 2400 / 2200 W
Peak power: 6000 W
AC output voltage / frequency: 230 VAC ± 2% 50 Hz ± 0.1%
Input voltage range: 37.2–68 V
Maximum efficiency: 95%
No-load power: 15 W
Photovoltaic panel system protection: A - G
Operating temperature range: -40 °C to +50 °C (fan-cooled)
Humidity (non-condensing): maximum 95%
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX solar photovoltaic technology, and feature the unique ability to start up at full load.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage: Integrated functions for low voltage management.
Disconnection and restart: Configurable levels for low battery voltage.
Dynamic disconnection: Adjustment of the disconnection level according to load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode:
Automatic start/stop.
Level sensor for ECO mode.
Alarm relay.
Monitoring:
Monitoring of input and output voltage.
Load and alarm monitoring.
VE.Direct communication port:
Allows connection to a computer (VE.Direct to USB interface cable required) for configuration and parameter monitoring.
Proven reliability:
Complex topology: H-bridge toroidal transformer, demonstrating reliability over the years.
The inverters are short-circuit resistant and protected against overheating caused by overload or high ambient temperatures.
ECO mode:
In ECO mode, the inverter switches to standby when the load falls below a certain preset value. In standby, the inverter starts up every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter remains on.
Technical specifications:
Maximum power: 10,000 W
AC output voltage: 230 V
DC input voltage: 37.2–68 V
Maximum efficiency: 95%
Operating temperature: -40 °C to +50 °C
Dimensions: 555 x 295 x 160 mm
Weight: 28 kg
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Quattro offers a wide range of advanced features.
The Quattro-II has two AC inputs (AC-in-1 and AC-in-2) for connecting two independent power sources. For example, two generators or a mains supply and a generator. The Quattro automatically selects the input to which power is present.
If power is present at both inputs, the Quattro-II selects the AC-in-1 input to which the generator is normally connected.
Automatic and uninterrupted switching
In the event of a power failure or when the generator set is switched off, the Quattro-II will switch to inverter operation and take over the power supply to the connected devices. This happens so quickly that the operation of computers and other electronic devices is not disrupted (continuous power supply or UPS functionality). This makes the Quattro-II very suitable as an emergency power supply system in industrial and telecommunications applications,
Product details
PowerControl & PowerAssist
Yes
Transfer switch
50A
Maximum AC input current
50A
Continuous output power at 25°C
5000VA
Maximum power
9000W
Maximum efficiency %
96
Maximum battery charging current
120A
Battery temperature sensor
Yes
Programmable relay
Yes
Operating temperature range
from -40 to +65°C (fan-assisted cooling)
Degree of protection
IP22
Weight
31 kg
Dimensions (H x W x D) mm
607 x 330 x 149
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters with SinusMAX Technology – Performance and Reliability
VE.Direct Port
The VE.Direct communication port offers connectivity with:
Computers ( VE.Direct to USB cable required)
Apple and Android smartphones, tablets, MacBooks and other devices ( VE.Direct Dual Bluetooth adapter required).
Configurable Features
Setting low battery voltage alarms and reset levels
Adjustment of battery cut-off and restart levels
Dynamic load-dependent disconnection
Output voltage: 210–245V
Frequency: 50Hz or 60Hz
ECO mode: enable/disable and sensitivity adjustment
Real-time monitoring: input/output voltage, charge status and alarms.
SinusMAX technology – Optimised efficiency and performance
Phoenix inverters stand out thanks to:
SinusMAX technology, specially designed to support start-up at maximum load, ideal for demanding applications.
The use of HF hybrid technology to provide a balance between performance and compact dimensions, low weight and high reliability.
Recommended for powering sensitive equipment: computers, LED/halogen lamps, low-power electrical tools.
ECO Mode and Remote Control
In ECO Mode, the inverter automatically switches to standby when the load falls below a preset threshold. It restarts automatically when a higher load is detected.
A remote control for switching on/off can be connected to a two-pin connector available on all models.
Automatic Load Transfer – Filax Switch
For low-power models, the Filax automatic transfer switch is recommended. The transfer time is under 20 milliseconds, ideal for sensitive electronic equipment, with no interruptions.
Technical Specifications
Dimensions: 86 x 172 x 275 mm
Weight: 3.9 kg
Rated power at 25°C: 500VA
Power at 25°C / 40°C: 400W / 350W
Peak power: 900W
Output voltage / Frequency: 230VAC ±3%, 50Hz or 60Hz ±0.1%
Input voltage: 18.4V – 34V
Low battery voltage alarm: 21.8V
Cut-off voltage: 18.6V
Regeneration voltage: 28V
Maximum efficiency: 90%
No-load power: 6.5W
Operating temperature: -40°C to +65°C (with fan)
Humidity: Maximum 95% (non-condensing)
Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters with SinusMAX Technology – Maximum Load Performance
Superior Technology – SinusMAX
Phoenix inverters in the professional range are designed for photovoltaic applications, offering optimum efficiency without compromising performance. SinusMAX technology allows for start-up at maximum load, making them ideal for powering demanding loads such as computers and low-power electric tools.
HF Hybrid Technology
Phoenix inverters utilise HF hybrid technology to combine compact dimensions, low weight and increased reliability, delivering consistent power for various types of loads.
Advanced Features
Full-load start-up: A unique feature of SinusMAX technology, delivering high performance even under heavy loads.
Filax automatic transfer switch: Transfer time of less than 20 milliseconds, ideal for computers and other sensitive equipment, which will continue to operate without interruption.
Remote on/off control: All models are equipped with a remote control connector, allowing for easy switching of the inverter.
LED diagnostics and multiple sockets
Phoenix models are equipped with an LED diagnostic system and are available with three types of output sockets for maximum flexibility.
Technical Specifications
Dimensions: 105 x 216 x 305 mm
Weight: 5.5 kg
Rated power at 25°C: 800VA
Power at 25°C / 40°C: 650W / 560W
Peak power: 1500W
Output voltage / Frequency: 110VAC or 230VAC ±3%, 50Hz or 60Hz ±0.1%
Input voltage: 18.4V – 34V DC
Low battery voltage alarm: 21.8V
Cut-off voltage: 18.6V
Regeneration voltage: 28V
Maximum efficiency: 90%
No-load power: 7W
Operating temperature: -40°C to +65°C (with fan)
Humidity: Maximum 95% (non-condensing)
Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The VE.Direct port can be connected to:
A computer (VE.Direct to USB cable required)
Apple and Android smartphones, tablets, MacBooks and other devices (VE.Direct Bluetooth required)
Fully configurable:
Low battery voltage alarm triggers and reset levels
Battery voltage cut-off and battery restart levels
Dynamic disconnection: load-dependent cut-off level
Output voltage: 210–245 V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO sensitivity level
Monitoring:
Input and output voltage
Charging and alarms
Phoenix inverters are part of a range designed for high-quality performance, based on superior photovoltaic technology – SinusMAX. This technology allows for start-up at full load.
Superior technology – SinusMAX
The Phoenix range of inverters is designed for professional use and is suitable for a wide range of applications. The design focuses on optimum efficiency, without compromising on performance.
Key features:
HF hybrid technology: a compact, reliable product capable of supplying power to any type of load.
Full-load start-up: Phoenix inverters are ideal for powering demanding loads.
VE.Direct communication port: allows connection to computers, smartphones, tablets and other devices.
Proven reliability: thanks to the toroidal transformer, Phoenix inverters offer protection against short circuits, overheating and overloads.
ECO mode: in this mode, the inverter enters standby when the load drops below a preset value, saving energy.
Remote on/off control: a remote control can be connected to a two-pin connector, available on all models.
Automatic transfer switch: recommended for low-power models, the Filax device ensures a very short transfer time, so that electronic equipment will continue to operate without interruption.
Technical specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 2.4 kg
Power output at 25°C: 250VA
Peak power: 400W
Output voltage: 230VAC ± 3%, frequency 50Hz/60Hz
Input voltage: 36.8 - 62.0V
Maximum efficiency: 88%
No-load power: 7.9W
Operating temperature range: -40°C to +65°C
Maximum humidity: 95%
Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The VE.Direct port can be connected to:
A computer (VE.Direct to USB cable required)
Apple and Android smartphones, tablets, MacBooks and other devices
(VE.Direct Dual Bluetooth required)
Fully configurable:
Low battery voltage alarm triggers and reset levels
Battery voltage cut-off and battery restart levels
Dynamic disconnection: load-dependent cut-off level
Output voltage 210–245 V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO sensitivity level
Monitoring:
Input and output voltage
Charging and alarms
Phoenix inverters are part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX – featuring the unique capability of starting at maximum load.
Superior technology – SinusMAX
The Phoenix range of inverters, designed for photovoltaic panel systems, is created for professional use and is suitable for a wide range of applications.
The design focuses on optimal efficiency without compromising on performance, delivering a high-quality sinusoidal output.
Using HF hybrid technology, Phoenix offers a product:
High quality
Compact in size
Lightweight
Highly reliable
Capable of supplying power for any type of load.
Start-up at full load – A unique feature of SinusMAX technology.
Wide range of applications
Phoenix inverters are recommended for powering demanding loads. They can be integrated into stand-alone photovoltaic kits – independent photovoltaic systems.
VE.Direct communication port
This can be connected to computers, smartphones (Apple, Android), tablets, MacBooks and other compatible devices.
Proven reliability
The toroidal transformer design has proven its long-term reliability.
Phoenix inverters offer protection against:
Short circuits
Overload
Overheating
High ambient temperatures
ECO mode
In ECO mode, the inverter goes into standby when the load drops below a preset level.
After entering standby mode, it activates for a short period (2.5 seconds, factory setting). If the load exceeds the preset level, the inverter remains on.
Remote control on/off
Can be connected to a two-pin connector, available on all Phoenix models.
Automatic transfer switch
For low-power models, we recommend using the Filax automatic transfer switch.
Filax has a very short transfer time (under 20 milliseconds), allowing computers or electronic equipment to operate without interruption.
Technical specifications:
Dimensions: 117 x 232 x 327 mm
Weight: 7.4 kg
AC power output at 25°C: 1200 VA
Power output at 25°C / 40°C: 1000 / 850 W
Peak power: 2200 W
AC output voltage / frequency: 110 VAC or 230 VAC +/- 3%, 50 Hz or 60 Hz +/- 0.1%
Input voltage range: 36.8 - 62.0 V
Low battery voltage alarm: 43.6 V
Battery power cut-off: 37.2 V
Low battery voltage (self-regeneration): 56 V
Maximum efficiency: 92%
Zero-load power: 10 W
Photovoltaic panel system inverter protection: IP21 / a - f
Operating temperature range: -40 to +65°C (fan-cooled)
Maximum humidity (non-condensing): 95%
Standards: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX solar photovoltaic technology, and feature the unique ability to start up at full load.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage: Integrated functions for low voltage management.
Disconnection and restart: Configurable levels for low battery voltage.
Dynamic disconnection: Adjustment of the disconnection level according to load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode:
Automatic start/stop.
Level sensor for ECO mode.
Alarm relay.
Monitoring:
Monitoring of input and output voltage.
Load and alarm monitoring.
VE.Direct communication port:
Allows connection to a computer (VE.Direct to USB interface cable required) for configuration and parameter monitoring.
Proven reliability:
Complex topology: H-bridge toroidal transformer, demonstrating reliability over the years.
The inverters are short-circuit resistant and protected against overheating caused by overload or high ambient temperatures.
ECO mode:
In ECO mode, the inverter switches to standby when the load falls below a certain preset value. In standby, the inverter starts up every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter remains on.
Technical specifications:
Dimensions: 485 x 219 x 125 mm
Weight: 13 kg
AC power output at 25°C: 2000 VA
Power output at 25°C / 40°C: 1600 / 1450 W
Peak power: 4000 W
AC output voltage / frequency: 230 VAC ± 2% 50 Hz or 60 Hz ± 0.1%
Input voltage range: 37.2–68 V
Maximum efficiency: 94%
No-load power: 11 W
Photovoltaic panel system protection: A - G
Operating temperature range: -40 °C to +50 °C (fan-cooled)
Humidity (non-condensing): maximum 95%
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters with SinusMAX Technology – Performance and Reliability for Professional Applications
VE.Direct Port The VE.Direct port allows Phoenix inverters to be connected to a wide range of devices:
Computers ( VE.Direct to USB cable required)
Apple and Android smartphones, tablets, MacBooks and other devices ( VE.Direct Bluetooth adapter required)
Full configuration and monitoring Inverters can be configured to optimise performance:
Setting low battery voltage alarms and reset levels
Dynamic battery disconnection, depending on load
Output voltage adjustment between 210V and 245V
Adjustable operating frequency: 50Hz or 60Hz
Enabling/disabling and adjusting the sensitivity of ECO mode
Real-time monitoring:
Input and output voltage
Charging and active alarms
Superior technology – SinusMAX
Phoenix inverters are equipped with SinusMAX technology, optimised for starting at full load. Their design focuses on delivering a high-quality sinusoidal output without compromising efficiency or reliability. Thanks to HF hybrid technology, these inverters are compact, lightweight and ideal for powering demanding loads.
Reliability and comprehensive protection
Phoenix inverters feature comprehensive protection against short circuits, overloads and overheating. Using a toroidal transformer, these inverters have proven their reliability over time, making them the perfect choice for powering sensitive devices such as computers, power tools and LED or halogen lighting.
ECO Mode
In ECO Mode, the inverter enters standby mode when the load drops below a preset level, saving energy. Once activated, the inverter periodically checks whether the load exceeds the set threshold, remaining in operation only when necessary.
On/Off remote control and automatic transfer switch
For low-power models, we recommend using the Filax automatic transfer switch, which has an extremely fast transfer time (under 20 milliseconds). This ensures a seamless transition between AC power sources, maintaining continuous operation of sensitive devices.
Technical specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 2.4 kg
Rated power at 25°C: 250VA
Power at 25°C/40°C: 200W / 175W
Peak power: 400W
Output voltage/frequency: 230VAC ±3%, 50Hz or 60Hz ±0.1%
Input voltage: 18.4V - 34V
Low battery voltage alarm: 21.8V
Battery cut-off voltage: 18.6V
Battery regeneration voltage: 28V
Maximum efficiency: 88%
No-load power: 5.2W
Operating temperature range: -40°C to +65°C (with fan)
Maximum humidity: 95% (non-condensing)
Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters with SinusMAX Technology – Superior Performance and Reliability
VE.Direct Port
The VE.Direct port allows inverters to be connected to various devices, providing easy access for configuration and monitoring:
Computers (requires VE.Direct to USB cable)
Smartphones (Apple, Android), tablets, MacBooks and other devices ( VE.Direct Dual Bluetooth adapter required)
Fully configurable
Setting alarms for low battery voltage and reset levels
Adjustment of battery cut-off and restart levels
Dynamic load-dependent disconnection
Adjustable output voltage: 210–245V
Selectable frequency: 50Hz or 60Hz
ECO mode: on/off and adjustable sensitivity
Real-time monitoring
Input and output voltage
Charging and alarms
SinusMAX Technology – Optimised Efficiency and Performance
Phoenix inverters are equipped with SinusMAX technology, designed to handle demanding loads and start-up at full load. Using hybrid HF technology, these inverters offer a perfect balance between performance and efficiency, without compromising reliability.
Proven reliability
Using a toroidal transformer, Phoenix inverters offer protection against short circuits, overheating and overloading, making them ideal for sensitive devices such as computers, LED lighting or power tools.
ECO Mode – Energy Efficiency
In ECO Mode, the inverter automatically enters standby when the load drops below a preset value. The inverter will restart automatically when the load exceeds this threshold, thereby saving energy.
On/Off Remote Control
A two-pin connector allows connection of a remote control for remote on/off operation.
Filax Automatic Transfer Switch
Recommended for low-power models, this switch offers a transfer time of less than 20 milliseconds, maintaining the continuous operation of electronic equipment without interruption.
Technical Specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 3 kg
Rated power at 25°C: 375VA
Power at 25°C / 40°C: 300W / 260W
Peak power: 700W
Output voltage / frequency: 230VAC ±3%, 50Hz or 60Hz ±0.1%
Input voltage: 18.4V – 34V
Low battery voltage alarm: 21.8V
Battery cut-off voltage: 18.6V
Battery regeneration voltage: 28V
Maximum efficiency: 89%
No-load power: 6.1W
Protections: Short-circuit, overcharge and overheating protection
Operating temperature: -40°C to +65°C (with fan)
Maximum humidity: 95% (non-condensing)
Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters – SinusMAX Technology
Phoenix inverters form part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX. These inverters are distinguished by their unique full-load start-up feature.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage
Low battery voltagecut-off and restart levels.
Dynamic disconnection: disconnection level depending on load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode: start/stop and level sensor for ECO mode.
Alarm relay.
Monitoring:
Input and output voltage
Load
Alarms
VE.Direct communication port
The VE.Direct port allows connection to a computer (VE.Direct to USB interface cable required) for configuration and monitoring of parameters.
Proven reliability
The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and protected against overheating caused by overload or high ambient temperatures.
ECO mode
In ECO mode, the inverter switches to standby mode when the load falls below a preset value. In standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on.
Technical specifications:
Dimensions: 485 x 219 x 125 mm
Weight: 12 kg
AC power output at 25°C: 1600 VA
Power output at 25°C / 40°C: 1300 / 1200 W
Peak power: 3000 W
AC output voltage / frequency: 230 VAC +/- 2%, 50 Hz +/- 0.1%
Input voltage range: 18.6 - 34 V
Maximum efficiency: 94%
No-load power: 9 W
Photovoltaic panel system inverter protection: a - g
Operating temperature range: -40 to +50 °C (fan-cooled)
Humidity (non-condensing): maximum 95%
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters – SinusMAX Technology
Phoenix inverters form part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX. These inverters are distinguished by their unique full-load start-up feature.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage
Low battery voltagecut-off and restart levels.
Dynamic disconnection: disconnection level depending on load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode: start/stop and level sensor for ECO mode.
Alarm relay.
Monitoring:
Input and output voltage
Load
Alarms
VE.Direct communication port
The VE.Direct port allows connection to a computer (VE.Direct to USB interface cable required) for configuration and monitoring of parameters.
Proven reliability
The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and protected against overheating caused by overload or high ambient temperatures.
ECO mode
In ECO mode, the inverter switches to standby mode when the load falls below a preset value. In standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on.
Technical specifications:
Dimensions: 485 x 219 x 125 mm
Weight: 13 kg
AC power output at 25°C: 2000 VA
Power output at 25°C / 40°C: 1600 / 1450 W
Peak power: 4000 W
AC output voltage / frequency: 230 VAC +/- 2%, 50 Hz +/- 0.1%
Input voltage range: 18.6 - 34 V
Maximum efficiency: 94%
No-load power: 9 W
Photovoltaic panel system inverter protection: a - g
Operating temperature range: -40 to +50 °C (fan-cooled)
Humidity (non-condensing): maximum 95%
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-2 / IEC 61000-6-3
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters – SinusMAX Technology
Phoenix inverters form part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX. These inverters are distinguished by their unique full-load start-up feature.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage
Low battery voltagecut-off and restart levels.
Dynamic disconnection: disconnection level depending on load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode: start/stop and level sensor for ECO mode.
Alarm relay.
Monitoring:
Input and output voltage
Load
Alarms
VE.Direct communication port
The VE.Direct port allows connection to a computer (VE.Direct to USB interface cable required) for configuration and monitoring of parameters.
Proven reliability
The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and protected against overheating caused by overload or high ambient temperatures.
ECO mode
In ECO mode, the inverter switches to standby mode when the load falls below a preset value. In standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on.
Technical specifications:
Dimensions: 485 x 285 x 150 mm
Weight: 19 kg
AC power output at 25°C: 3000 VA
Power output at 25°C / 40°C: 2400 / 2200 W
Peak power: 6000 W
AC output voltage / frequency: 230 VAC +/- 2%, 50 Hz +/- 0.1%
Input voltage range: 18.6 - 34 V
Maximum efficiency: 94%
No-load power: 13 W
Photovoltaic panel system inverter protection: a - g
Operating temperature range: -40 to +50 °C (fan-cooled)
Humidity (non-condensing): maximum 95%
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
VE.Direct port: The VE.Direct port allows connection to:
A computer (requires a VE.Direct to USB cable)
Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth module with Dual Bluetooth)
Available settings:
Alarms for low battery voltage and reset levels
Battery cut-off and restart voltage
Dynamic disconnection: load-dependent adjustment
Output voltage: 210V – 245V
Frequency: 50Hz or 60Hz
ECO mode: on/off and adjustable sensitivity level
Parameter monitoring: input and output voltage, charge level and alarms
Superior SinusMAX technology: Phoenix inverters are designed for professional use, based on innovative SinusMAX technology. This technology allows for start-up at full load, delivering high performance without compromising on efficiency. Utilising HF hybrid technology, these inverters are compact, lightweight, extremely reliable and capable of handling any type of load.
Reliability and performance: The toroidal transformer design has proven its reliability over the years. Phoenix inverters offer protection against short circuits, overloads, overheating and high ambient temperatures. Starting at full load is a unique feature, making these inverters ideal for powering sensitive equipment such as computers, LEDs, halogen lamps or low-power electrical tools.
ECO Mode: In ECO Mode, the inverter enters standby when the load drops below a preset threshold. In standby mode, it will switch on periodically to check the load (the default setting is 2.5 seconds). If the load exceeds the preset threshold, the inverter remains switched on.
Remote on/off control: All models allow the connection of a remote control to switch the inverter on/off via a two-pin connector.
Automatic transfer switch (Filax): For low-power models, we recommend using the Filax automatic transfer switch, which offers an extremely short transfer time (under 20 milliseconds), ensuring the continuous operation of electronic equipment.
Technical specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 2.4 kg
Rated power (at 25°C): 250VA
Power at 25°C/40°C: 200W / 175W
Peak power: 400W
Output voltage: 230VAC ± 3%, 50Hz or 60Hz ± 0.1%
Input voltage: 9.2V – 17V
Low voltage alarm: 10.9V
Battery cut-off protection: 9.3V
Low battery voltage recovery: 14.0V
Maximum efficiency: 87%
No-load power consumption: 4.2W
Protections: short circuit, overcurrent, overtemperature, overheating
Operating temperature: -40°C to +65°C (with ventilation)
Maximum humidity (non-condensing): 95%
Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
VE.Direct communication port:
Compatible with:
Computers (requires VE.Direct to USB cable)
Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Dual module)
Fully configurable features:
Alarm triggers for low battery voltage and reset levels
Setting battery cut-off and restart levels
Dynamic disconnection: load-dependent cut-off adjustment
Output voltage adjustable between 210V and 245V
Selectable frequency: 50 Hz or 60 Hz
ECO mode: enable/disable and sensitivity adjustment
Monitoring of input and output voltage, load level and alarms
Superior SinusMAX technology: Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX technology. This offers a unique full-load start-up feature, enabling the power supply of devices requiring high current at start-up, without compromising efficiency or performance.
Compact design and high reliability: Thanks to HF hybrid technology, Phoenix inverters are compact, lightweight and extremely reliable, capable of handling a wide range of loads, from sensitive equipment to power tools. The toroidal transformer design has proven its reliability over the years, offering protection against short circuits, overheating, overloads and high temperatures.
Full-load start-up: SinusMAX technology enables full-load start-up, a feature rarely found in other high-frequency inverters. This makes Phoenix inverters ideal for powering demanding loads, such as computers, LED and halogen lamps, or low-power power tools.
ECO mode: In ECO mode, the inverter automatically enters standby when the load drops below a preset level. In this standby mode, the inverter starts up periodically (default setting of 2.5 seconds) to monitor the load. If the load exceeds a certain threshold, the inverter will remain switched on.
Remote on/off: All Phoenix inverter models allow the connection of a remote control for start and stop control via a two-pin connector.
Automatic transfer switch (Filax): For low-power models, we recommend using the Filax automatic transfer switch, which ensures an extremely short transfer time (under 20 milliseconds). This allows electronic equipment, such as computers, to operate without interruption.
Technical specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 3 kg
Power output at 25°C: 375VA
Rated power at 25°C / 40°C: 300W / 260W
Peak power: 700W
Output voltage: 230VAC ± 3%, frequency 50Hz or 60Hz ± 0.1%
Input voltage: 9.2V - 17V
Low voltage alarm: 10.9V
Battery power cut-off: 9.3V
Low battery voltage recovery: 14.0V
Maximum efficiency: 89%
No-load power consumption: 5.6W
Protection against short circuit, overcurrent, overtemperature
Operating temperature range: -40°C to +65°C (ventilated)
Maximum humidity: 95% (non-condensing)
Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
VE.Direct port:
Compatible with:
Computer (requires VE.Direct to USB cable)
Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Dual module)
Configurable features:
Alarms for low battery voltage and reset
Settings for battery shutdown and restart
Dynamic load-dependent disconnection
Output voltage adjustable between 210V and 245V
Frequency: 50Hz or 60Hz
ECO mode on/off and adjustable sensitivity
Monitoring of input and output voltage, charging and alarms
SinusMAX technology: Phoenix inverters use advanced SinusMAX technology, offering full-load start-up, ideal for equipment requiring high-current start-up.
Reliability and Performance:
Toroidal transformer design for superior reliability
Protection against short circuits, overloads and overheating
Compatible with demanding loads: computers, LED/halogen lamps, power tools
Smart ECO Mode: The inverter automatically switches to standby when the load drops below a preset level and resumes operation when the load increases.
On/Off Remote Control: Remote control option for remote operation, connectable to a two-pin connector.
Automatic Transfer Switch (Filax): Very short transfer time (under 20 ms) to ensure uninterrupted operation of sensitive equipment, such as computers.
Technical Specifications:
Dimensions: 86 x 172 x 275 mm
Weight: 3.9 kg
Power output (25°C): 500VA
Rated power (25°C/40°C): 400W / 350W
Peak power: 900W
Output voltage/frequency: 230VAC ± 3%, 50Hz or 60Hz ± 0.1%
Input voltage: 9.2V - 17V
Low battery voltage alarm: 10.9V
Battery cut-off: 9.3V
Battery voltage recovery: 14.0V
Maximum efficiency: 90%
Power consumption at no load: 6W
Protections: short circuit, overload, overtemperature
Operating temperature range: -40°C to +65°C (with fan)
Maximum humidity: 95% (non-condensing)
Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
![[Re-sealed] DEYE SUN-12K-SG04LP3-EU 12kW Three-Phase Hybrid Inverter](//solartech.eu/cdn/shop/files/SUN-10K-SG04LP3-EU_2_be01c37c-336c-4dbe-bf10-e2aa05fcc36d.jpg?v=1781008139&width=645)
![[Re-sealed] DEYE SUN-12K-SG04LP3-EU 12kW Three-Phase Hybrid Inverter](//solartech.eu/cdn/shop/files/SUN-10K-SG04LP3-EU_affbfe88-925e-4d92-8038-f9d12510a207.jpg?v=1781008139&width=645)
![[Re-sealed] DEYE SUN-12K-SG04LP3-EU 12kW Three-Phase Hybrid Inverter](http://solartech.eu/cdn/shop/files/SUN-10K-SG04LP3-EU_2_be01c37c-336c-4dbe-bf10-e2aa05fcc36d.jpg?v=1781008139&width=645)
![[Re-sealed] DEYE SUN-12K-SG04LP3-EU 12kW Three-Phase Hybrid Inverter](http://solartech.eu/cdn/shop/files/SUN-10K-SG04LP3-EU_affbfe88-925e-4d92-8038-f9d12510a207.jpg?v=1781008139&width=645)
