10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT333S Mini Thermometer and Hygrometer
This product comes with a 3-year warranty. The UT333S is a precise, safe and reliable digital thermometer with a hygrometer and compact dimensions. The display is split and shows the temperature and humidity readings simultaneously, facilitating measurement in various conditions and environments. It is widely used in grain storage, transport, archives, materials processing, forestry, animal husbandry, healthcare, educational institutions, the public sector and households.
Product specifications:
- Accurate digital thermometer and hygrometer in a single device
- Split digital display, flexible coiled cable
- 1-second sampling frequency, wide range of applications, compact size
Technical specifications:
Temperature measurement: °F/> Units of measurement: °C
Measuring range °C: -10 to 60
Measuring range °F: 14 to 140
Resolution: 0.1 °C / 0.2 °F
Measurement deviation: ± 1.0 °C / 2.0 °F
Measurement range:
0.0 °F
Measurement range:
0.0 °C humidity
Resolution: 0.1% relative humidity
Measurement deviation: ± 5%
Other functions:
Min. and max. values
Data hold
Overload indication
Display backlight
Low battery warning
Auto-off when idle
Display dimensions: 32 x 35 mm
Dimensions: 110 x 53 x 26 mm
Power: AAA
Battery life: 3 x AAA
1 m
Operating temperature: 0 to 40°C
Altitude: 2000 m
Pollution class: 2
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT331+ and UT332+ measuring instruments measure temperature and humidity with high precision; they determine the dew point temperature and wet-bulb temperature. They allow you to set the system time and date and to store the measured data in memory, either manually or automatically at set intervals. The measured data can subsequently be exported to computer software for further analysis. These meters can be used in factories, the food industry, healthcare, laboratories, environmental protection and other fields. The devices contain a high-precision sensor and a low-power microprocessor; 4 x 1.5V AAA alkaline batteries are sufficient for power supply. The UT332+ differs from the UT331+ in terms of higher accuracy and greater data storage capacity.
Parameters:
- Temperature measurement in the range -20 °C to 70 °C with a resolution of 0.1 °C RH
- measurement response time approximately 1 second
- choice of units: °C or °F
- display of minimum and maximum values
- large backlit display
- Alarm setting with red or blue backlit display
- Measurement hold function
- System time setting
- Data storage interval
- manual or 60-second interval data storage for 999 data sets
- Dew point temperature measurement
- wet bulb temperature measurement
- powered by 4 x 1.5V AAA alkaline batteries
- USB data cable for transferring measured values to a PC
- option to display measured data on a PC in real time, with a +/5V power supply PC specifications:
- temperature measurement range: -20.0 °C to 70.0 °C, measurement accuracy ± 0.3 °C
- Dew point temperature measurement range: -78.2 °C to 70.0 °C, measurement accuracy ± 0.8 °C
- Temperature measurement range: 7 °C
- 21 °C to 60 °C, measurement accuracy ± 0.3 °C
- Humidity measurement range: 0 to 99.9% RH; measurement accuracy within the range of 10% to 80% RH is ±2%, outside this range the accuracy is ±2.5%
- Temperature resolution: 0.1 °C, humidity
-1 RH
- display: multi-line LCD, backlit, dimensions 26.5 x 35.5 mm
- alarm setting: lower temperatures indicated in blue and higher temperatures in red
- data storage: for 999 data sets
- power supply: 4 x 1.5V AAA alkaline batteries, product dimensions
-8 x 5
- 33.8 mm
- Product weight: 130 g
Contents of individual package:
- UT332+ device: 1 pc
- USB data cable: 1 pc
- 1.5V AAA battery (R03): 4 pcs
- Standard
box: 10 pcs
- Standard box dimensions: 280 x 275 x 230 mm
- Total box weight: approx. 3.7 kg
Manufacturer:
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT331+ and UT332+ measuring instruments measure temperature and humidity with high precision; they determine the dew point temperature and wet-bulb temperature. They allow you to set the system time and date and to store the measured data in memory, either manually or automatically at set intervals. The measured data can subsequently be exported to computer software for further analysis. These meters can be used in factories, the food industry, healthcare, laboratories, environmental protection and other fields. The devices contain a high-precision sensor and a low-power microprocessor; 4 x 1.5V AAA alkaline batteries are sufficient for power supply. The UT332+ differs from the UT331+ in terms of higher accuracy and greater data storage capacity.
List of features:
- Temperature measurement in the range -20 °C to 70 °C with a resolution of 0.1 °C
- Humidity measurement in the range of 1% RH with a resolution of 10% RH
- Measurement response time approximately 1 second
- choice of units: °C or °F
- display of minimum and maximum values
- large backlit display
- Alarm setting with red or blue backlit display
- Measurement hold function
- System time setting
- Data storage interval
- manual or 60-second interval data storage for 299 data groups
- Dew point temperature measurement
- wet-bulb temperature measurement
- powered by 4 x 1.5V AAA alkaline batteries
- USB data cable for transferring measured values to a PC
- ability to display measured data on a PC in real time, with a +5V power supply PC specifications:
- temperature measurement range: -20.0 °C to 70.0 °C, measurement accuracy ± 0.5 °C
- dew point temperature measurement range: -78.2 °C to 70.0 °C, measurement accuracy ± 1 °C
- temperature measurement range, °7 °C, thermometer: -21 °C to 60 °C, measurement accuracy ± 0.5 °C
- Humidity measurement range: 0 to 99.9% RH, measurement accuracy within the range of 10% to 90% RH is ± 3%, outside this range the accuracy is ± 3.5%
- temperature resolution: 0.1 °C, humidity
-1 RH
- display: multi-line LCD, backlit, dimensions 26.5 x 35.5 mm
- alarm setting: lower temperatures indicated in blue and higher temperatures in red
- data storage: for 299 data sets
- power supply: 4 x 1.5V AAA alkaline batteries, automatic switch-off
-; product dimensions: 185 x 54.8 x 33.8 mm
- product weight: 130 g
Contents of individual package:
- UT331+ device: 1 pc
- USB data cable: 1
- 1.5V AAA battery (R/03/>
):
- standard quantity per box: 10 pcs
- Standard box dimensions: 280 x 275 x 230 mm
- Total weight of the box: approx. 3.7 kg
Manufacturer:
https://www.uni-trend.com/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT330T USB data logger features a large reusable storage capacity, real-time online measurement and a standard USB connector design. It can be plugged into a PC and data can be easily viewed or exported in PDF or XLS format. The logger is primarily intended for applications requiring high measurement accuracy and long-term recording of temperature and humidity, such as medicines and foodstuffs that are prone to rapid deterioration during transport and storage.
Product specifications:
- 64,000 data storage groups
- automatic recording interval / adjustable LED settings /<br/
alarm
- alarm threshold value
- low battery indicator
- alarm mode setting
- auto-off
- USB interface
- °C / °F selection
Technical specifications:
- measurement range: -30 to 70 °C measurement accuracy: ± 0.1 °C
- protection: IP65
- resolution: 0.1°C
- Humidity: 0% RH ~ 99.9% RH ±2.5% RH
- resolution: 0.1% RH
- Humidity offset setting
- data storage: 64,000 records/cycle setting
- recording/setting range
Interval: 10 s to 24 h
- auto-off: 10 s
- power supply: CR2032
- display: 23 mm x 20 mm
- net product weight: 57.4 g
- product dimensions: 105 mm x 38 mm x 14 mm, accessories: battery, stand
Screw, battery holder
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT330T USB data logger features a large reusable storage capacity, real-time online measurement and a standard USB connector design. It can be plugged into a PC and data can be easily viewed or exported in PDF or XLS format. The logger is primarily intended for applications requiring high measurement accuracy and long-term temperature recording, such as food processing and cold chain transport,
Product parameters:
- 64,000 data storage groups
- Adjustable sampling interval
- Adjustable sampling interval
- IP65-rated automatic recording duration setting
- cyclic recording
- low battery indicator
- LED alarm
Technical parameters:
- Measurement range: -30 ~ 70 °C
- measurement accuracy: ±0.4 °C
- Protection: IP65
-1°C
-°C 64,000 groups
- cyclic recording support
- adjustable sampling interval: 10 s to 24 h
- unit/alarm setting: default unit °C; alarm type is divided into standard single/cumulative alarm, single alarm
- start mode: button/software (immediate, delayed, timer)
- recording delay: 0 min ～ 240 min (default 0), can be set via PC software
- Alarm delay: 0 s ～ software ～ ～ 10 Default auto-off: 10s
- power supply: CR2032
- display: 23 mm x 20 mm
- Net product weight: 41 g
- Product dimensions: 98 mm x 38 mm x 14 mm
Standard accessories: battery, stand, screws, stickers
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT325F four-channel digital contact thermometer, which uses a thermocouple as a temperature probe, ensures accurate temperature measurement and is suitable for a wide range of applications, whether in industry, research and education, or at home. The package includes four temperature probes with a Type K thermocouple,
Product specifications:
- Suitable for K, J, T, E, R, S and N-type thermocouples
- Four temperature measurement channels are available. It can display the temperature difference between any two channels
- Users can set time intervals for automatic data logging
- Can store 72,000 data sets
- measurement in °C and °F, display of minimum, maximum and average temperatures
- Offset compensation can be set
- Can connect via Bluetooth to Android and iOS apps for control. Users can view recorded data, save and export graphs
- Can connect to PC software via USB for operation, and users can view recorded data, save and export graphs
Technical parameters:
- Measurement range:
Type K thermocouple: -200 °C to 13028 °C (2192 °F)
Type J thermocouple: -210 °C to 1200 °C (-346 to 2192 °F)
Type T thermocouple: -250 °C to 400 °C (-418 to 752 °F)
Type E thermocouple: -150 °C to 102 °C (150 °F)
Type R thermocouple: 0 °C to 1767 °C (-32 to 3212 °F)
Type S thermocouple: 0 °C to 1767 °C (-32 to 3212 °F)
Type N thermocouple: -200 °C to 1328 °C (2–328 °F)
- display resolution: 0.1 °C / °F / K (<1000), 1.0 °C / °F / K (≥1000)
- accuracy: ±(0.2% + 0.5 °C) / ±(0.2% + 0.9 °F) below -10 °C; basic + 2 °C; Type T below -200 °C: For reference only. Accuracy applies at an ambient temperature of 18 °C to 28 °C and does not include thermocouple error
- measurement deviation: ± 0.1% + 0.3 °C
- response time: approx. 500 ms - shutdown mode
- automatic measurement
- MIN / MAX / AVG
- Timed measurement: the recording interval can be set to 1 s–24 h for regular recording of measured data
- Backlight: on / off
- Data transfer: USB Type-C, Bluetooth
- low battery warning
- Drop resistance: 1m
- Operating temperature: approx. -10°C to 50°C (14°F to 122°F)
- Power supply: 3 x AAA batteries (included in the pack)
- contents: 4 x thermocouples, product, user manual
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT325 Digital Thermometer
This product comes with a 3-year warranty. The UT325 device manufactured by UNI-T is a precision digital thermometer with two thermocouple inputs and contact temperature measurement. The device allows you to select three different temperature measurement units: °C / °F / K. A type K thermocouple probe rated up to +260 °C is supplied as standard with the instrument, but it is possible to purchase probes for measuring temperatures up to 1767 °C, for example the UNI-T T03 to T07. Up to 100 sets of measurements can be stored in the device’s memory and subsequently transferred via USB to a computer for further processing – data analysis using PC software. The device is powered by a 9V battery (6F22) or via USB from a computer.
Product specifications:
- high accuracy and the ability to connect to a PC at an affordable price
- 2 x 4-digit LCD displays
- temperature reading resolution: 0.1 °C; in the range ＞ 999.9 °C then 1 °C
- ability to connect thermocouples of types: K, J, T, E, R, S, N
- selection of units of measurement: °C / °F / K
- data storage: yes, for 100 sets of measurements
- data transfer via USB interface:
-; yes
- automatic calibration: yes
Technical parameters:
Temperature ranges // accuracy:
- Type K thermocouple: from -200.0 °C to +1372 °C // ± (0.2% + 0.6)
-210 °C type J: -20 °C to thermocouple C // ± (0.2% + 0.6)
- Type T thermocouple: from -250.0 °C to +400.0 °C // ± (0.2% + 0.6)
- Type E thermocouple: -150.0 °C to + 1000 °C // ± (0.2% + 0.6)
- Type E thermocouple: -150.0 °C to +1000 °C // ± 0.2%: Type R thermocouple 0.0 °C to +1767 °C // ± (0.2% + 2)
- Type S thermocouple: 0 °C to + 1767 °C // ± (0.2% + 2)
- Type N thermocouple: -200 °C to +1300 °C // ± (0.2% + 2)
- Type N thermocouple: -200 °C to +1300 °C // ± (0.2% + 2)
30 x 32 mm, 2 four-digit data points
- temperature reading resolution: 0.1 °C; in the range ＞ 999.9 °C then 1 °C
- selection of units of measurement: °C / °F / K
- automatic calibration: yes
- two probe inputs: yes
- MAX / MIN / AVG mode: yes
- High and low alarm: yes
- data logging
-
- PC transfer: yes, USB interface
- automatic backlight: yes, when working with USB connected
- automatic calibration: yes
- automatic switch-off: yes
- low battery indicator: yes
- Power supply: USB battery or 9V (6F22)
General product features:/
Product weight: 270 g
- Product dimensions: 175 x 85 x 30 mm
Contents of individual package:
- UT325 device: 1 pc
- 9V battery (6F22): 1 pc
- USB interface cable: 1 pc
- for PC
- 1 pc
Wholesale package contents:
- Standard quantity per box: 10 pcs
- standard box dimensions: 405 x 290 x 165 mm
- standard box weight: 4.3 kg
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT320D Digital Thermometer
This product comes with a 3-year warranty. The UT320D dual-input digital contact thermometer ensures accurate temperature measurement and a wide range of applications, whether in industry, research and education, or in the home. Two temperature probes with a K-type thermocouple are included, but the J-type can also be used.
Product specifications:
- precise digital thermometer with two inputs and two UNI-T T01 temperature probes (K-type)
- measurement in °C and °F, display of minimum, maximum and average temperatures
- Measurement of the difference between the two inputs, two-line display, 4x sampling frequency per second, compact dimensions
Technical parameters:
Units of measurement: °C / °F
Measuring range °C: -50 to 1300
Measuring range °F: -58 to 2372
Resolution: 0.1 °C / 0.2 °F Accuracy: ± 1% / ± 1 °F
Sampling frequency: 4 times per second
Attached temperature probes: 2 x UTI-T T01 (Type K)
T01 measurement range: -40 to 260°C (-40 to 500°F)
Use of the T01 probe: common solid surfaces; the temperature probes are not suitable for measuring liquids, gases or gels
For measuring other materials, UNI-T probes can be used: T03, T04, T05, T06, T07
Display of minimum, maximum and average temperature
Measurement of the difference between the two inputs
Data hold
Display backlight
Low battery warning
Auto-off when inactive
Display dimensions: 36.4 mm x 3
Dimensions: 120 x 53 x 28 mm
Power: 3 x AAA batteries (included)
Weight: 0.06 kg
Drop resistance: 1 m
Operating temperature: 0 to 40°C
Relative humidity
TR
Relative humidity
TR
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UNI-T UT320T 2-in-1 thermometer combines infrared and probe measurement. Infrared measurement is used to quickly detect the surface temperature of an object by measuring the infrared energy emitted by the target surface. Probe measurement can accurately measure the internal temperature of objects. It is widely used in the refrigeration, HVAC, automotive, construction and other industries.
Product parameters:
- 2-in-1 temperature measurement
- High accuracy
- Probe folds to 180°
- Max./Min./T1-T2>- Adjustable LCD emissivity/>-T2>- Backlit display
- Protection: IP54, drop resistance from 2 m
- Simple and compact design
- Thermometer applications: car maintenance, construction measurement, air conditioning maintenance, liquid measurement
Technical parameters:
Infrared measurement
- Measurement range: – – 40 °C: – – 30 °C (572 °F)
- temperature coefficient: ±0.1 °C / °C or ±0.1% °C, whichever is greater
- Distance-to-spot ratio (D:S): 8 : 1
- emissivity: 0.1 to 1.0 (adjustable)
- spectral range: 5 μm response time:
- μm⤤ 500 ms (95% reading)
- repeatability 1.0°C or 1.0% / 2°F or 1.0%, whichever is greater
- Laser: Class 2, single point, power <1 mW, wavelength 650±20 nm
- Operating time: approx. 30 h (laser and backlight activated)
Measurement with a probe
- Measurement range: -40 °C – 300 °C (-40 °F – 572 °F)
- Probe type: NTC
- minimum test depth: 12.7 mm
- Operating time: approx. 30 h (backlight on)
- FSTN LCD display, size 18 x 28 mm
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Storage temperature: -20°C to 60°C
- Operating humidity:
- Maximum operating humidity: <- 0% RH> Altitude: 2000 m
- IP54 protection rating
- drop test from a height of 2 m
- Automatic shut-off time: 10 min
- Data logger
- Measurement lock
- Unit conversion (℃/℉)
- Measurement: Max/Min/difference
- 4 x 2 x 2 x 2 mm
- Product weight: approx. 110 g (with batteries)
- power supply: 2 x 1.5 V AAA batteries (LR03)
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UNI-T UT312A is a portable vibration tester comprising an acceleration sensor and a digital display circuit. It is primarily used to measure the acceleration, velocity and displacement of vibrations in mechanical devices. Its advantages include a wide measurement range, ease of use and convenient portability. The vibration tester is used for inspection work in the mechanical engineering, energy, chemical and metallurgical industries, aviation and many other sectors. An ideal tool for technical inspection and maintenance of rotating equipment (fans, pumps, compressors, motors and others).
Product parameters:
- simple design, compact structure, easy to carry and use
- measurement of acceleration, velocity and displacement
- high and low frequency acceleration
- multiple high- and low-frequency acceleration modes
- multiple magnetic acceleration modes
cup
- highly sensitive sensor
- torch for measurements at night or in environments with poor lighting conditions
- 2.4-inch TFT colour screen, improved display of measured values and status
- auto-rotating screen, easy to view and control
- Switchable high and low vibration frequency
- Rechargeable battery:
- UKCA-certified lithium
Technical specifications:
- acceleration (PEAK):
range: 0.1 to 199.9 m/s²
frequency response: 10 Hz to 15 kHz, 0.1 m/s², ±(5% + 2 digits)
vibration velocity measurement)
range: 0.1 to 199.9 mm/s
frequency response: 10 Hz to 1.5 kHz, 0.1 mm/s, ±(5% + 2 digits)
- oscillation amplitude measurement (P-P)
range: 0.001 to 199 Hz frequency response: z 9. , 0.001 mm , ±(10%+2dgts)
- auto-rotating screen
- High-frequency/low-frequency acceleration
- Datahold (data hold)
- torch
- LCD type: 2.4″ colour TFT display, full LCD display
-/>- 5 minutes of automatic operation
-/> probes: long and short probes (optional), U-shaped magnetic suction cup
- low battery indicator
- Battery type: 1350 mAh / 3.7 V lithium battery
- Charging interface: USB-C
- charging voltage: DC 5 V
- charging time: approx. and humidity: 0 °C to 40 °C; ≤ 80% RH, non-condensing
- Storage temperature: -20 °C to 60 °C
- Dimensions: 168 x 28 x 64 mm
- Product weight: 364 g (including short probe)
Standard magnetic suction cup (UT312A only), user manual.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT320A Digital Thermometer
This product comes with a 3-year warranty. The UT320A single-input digital thermometer offers accurate temperature measurement and a wide range of applications, whether in industry, research and education, or in the home. The package includes a temperature probe with a K-type thermocouple, but a J-type can also be used.
Product specifications:
- precise digital thermometer with UNI-T T01 temperature probe (type K)
- measurement in °C and °F, display of minimum, maximum and average temperatures
- sampling rate 4 times per second, wide range of applications, compact dimensions
Technical measurement parameters: °C: /> °C
Measurement range °C: -50 to 1300
Measurement range °F: -58 to 2372
Resolution: 0.1 °C / 0.2 °F
Measurement deviation: ± 0.5% + 1
Probe sampling frequency: 4xT per second T1 xT temperature probe: 4xT xT (Type K)
T01 probe measurement range: -40 to 260°C (-40 to 500°F)
Application of the T01 probe: common solid surfaces
The T01 probe is not suitable for measuring the temperature of liquids, gels and gases
For measuring other materials, probes T01, T03, T06 and T07 can be used
Minimum, maximum and average temperature
Data storage
Display backlight
Low battery warning
Automatic switch-off when inactive
Display dimensions: 37.4 x 36.4 mm
Dimensions: 120 x 53 x 28 mm AA (included)
Weight: 0.06 kg
Drop resistance: 1 m
Operating temperature: 0 to 40°C
Relative humidity: <80%
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UNI-T UT311A is a portable vibration tester, equipped with an acceleration sensor and a digital display circuit, designed to measure the acceleration, velocity and displacement of vibrations in mechanical equipment. The device stands out for its wide measurement range, simple operation and high portability.
It is widely used in inspection and maintenance activities in sectors such as the mechanical, energy, chemical, metallurgical and aeronautical industries, as well as in many other industrial applications. It is an ideal tool for the technical inspection and maintenance of rotating equipment: fans, pumps, compressors, motors, etc.
Key features
Measurement of acceleration, velocity and displacement of vibrations
Low and high frequency acceleration modes
High-sensitivity sensor
Compatible with multiple probes (long and short)
Built-in torch, useful for measurements in low-light environments
2.4” colour TFT screen for clear display of readings
Auto-rotating screen for ease of use
Data Hold function (freezing of displayed values)
Rechargeable lithium battery power supply
Certifications: CE, UKCA
Technical specifications
Acceleration (PEAK)
Range: 0.1 ~ 199.9 m/s²
Frequency response: 10 Hz ~ 1 kHz / 10 Hz ~ 15 kHz
Resolution: 0.1 m/s²
Accuracy: ±(5% + 2 digits)
Vibration velocity (RMS)
Range: 0.1 ~ 199.9 mm/s
Frequency response: 10 Hz ~ 1.5 kHz
Resolution: 0.1 mm/s
Accuracy: ±(5% + 2 digits)
Vibration displacement (P-P)
Range: 0.001 ~ 199.9 mm
Frequency response: 10 Hz ~ 1 kHz
Resolution: 0.001 mm
Accuracy: ±(5% + 2 digits)
Additional functions
Low/high frequency acceleration mode
Data Hold function
Built-in LED torch
Automatic shut-off after 5 minutes of inactivity
Low battery indicator
Power supply and battery life
Battery type: Lithium 3.7V / 1350 mAh
Charging: USB, DC 5V
Charging time: approx. 3 hours
Battery life: approx. 12 hours
Operating conditions
Operating temperature: 0°C ~ 40°C
Humidity: ≤ 80% RH
Dimensions and weight
Dimensions: 180 × 28 × 64 mm
Weight: approx. 191 g (with short probe)
Included accessories
Short probe
Long probe
USB charging cable
User manual
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT30R Infrared Thermometer The UT30R infrared thermometer is a non-contact thermometer offering the advantages of simple and hygienic operation, as well as fast and accurate measurement. It can accurately measure temperature in 1 second when you point the sensor at a target object from a distance of 5 to 10 cm.
Product specifications:
- Single-button operation- Backlit LCD display for use in damp conditions- Automatic data hold for 8 seconds- Auto power off- Low voltage auto-shutdown option- °C/°F- Power-off memory function
Technical specifications:
- temperature measurement range: 32°C ~ 45°C (89.6°F ~ 113°F)- resolution: 0.1°C (0.1°F)- accuracy: 0..6°C (°C)- measurement repeatability: 0.3°C (0.6°F)- response time: 500 ms- measurement distance: 5 cm ~ 10 cm- optical measurement range: 5.5μm ~ 14.0μm- at high temperature (over 37.2°C): the display flashes: flashing: yes- automatic switch-off when inactive: yes- ability to switch between °C and °F: yes- power supply: 1.5 V AAA battery (LR03) × 2- operating temperature: 15°C ~ 30°C (59°F ~ 86°F max.), at 85% humidity- temperature during storage and transport: -20°C ~ 60°C (-40°F ~ 140°F), at max. 85% humidity- Net weight of the product: 148 g- Product dimensions: 135 × 94 × 36 mm
Package contents:
UT30R- 1.5 V AAA (LR03) battery: 2 pcs- user manual
- Package dimensions: 145 × 90 × 50 mm- weight: 0.19 kg
MANUFACTURER: UNI-TRENDhttps://www.trend.com
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT309C PRO Infrared Thermometer
This product comes with a 3-year warranty. The UT309C professional non-contact infrared thermometer can quickly and accurately determine surface temperatures ranging from -35°C to +650°C by measuring the infrared energy radiated from the target surface. The UT309C is a highly durable device, suitable for everyday use. It is drop-resistant from 3m, and its excellent IP65 protection rating ensures good resistance to water and dust. For easier and more intuitive aiming of the device at the target surface, a dual-rotating laser with two wavelengths is built in, indicating the correct aiming of the thermometer. The distance-to-spot ratio is 12:1 with this instrument. You can preset the emissivity of the measured surface within the range of 0.1 to 1.0. Preset functions and measured values are displayed on a high-contrast black-and-white LCD screen, whilst temperature limits are indicated by LEDs (red for exceeding the upper limit and blue for the lower limit). It is possible to set a continuous measurement; after 2 minutes, the display backlight turns off, and once the measurement is complete by pressing the trigger button again, the temperature value remains on the display. The temperature measurement time is up to 250 ms in 95% of cases. It is possible to display the minimum, maximum and average temperatures, as well as the difference between the highest and lowest measured temperatures (MIN, MAX, AVG, DIF). The thermometer switches off automatically to reduce power consumption if not used for 8 seconds. This auto-off function can be disabled.
Product specifications:
- infrared thermometer for non-contact measurement of surface temperatures
- temperature range: -35°C to +650°C, switchable to °F
- marking of the measured surface with a double ratio of the distance to the surface using a laser measuring
is 12 : 1 with this instrument
- Backlit black-and-white LCD display with a resolution of 32 x 29 mm
- Indication of limit value exceedance via LED (red, blue)
- Tripod mounting socket
Technical parameters:
- Temperature range:
- 0 ℃ to +650 ℃: (-31 ℉ to 1202 ℉)
- Temperature measurement accuracy ≥0℃: ± 1.8℃ or ± 1.8% of the reading, whichever is greater
- Temperature measurement accuracy <0°C: ± (1.8°C + 0.1°C) of the temperature reading, regardless of the temperature reading<br/°C - Temperature measurement accuracy ≥32°F: ± 3.6°F or ± 1.8% of the reading, whichever is greater
- temperature measurement accuracy <32℉: ± (3.6℉ + 0.1℉/℉ reading, whichever is greater)
- measurement resolution: 0.1°C; repeatability: ± 1°C (1.8°F) or 0.8% of reading (whichever is greater)
- spectral response: 8μm to 14μm
- response time in 95% of cases: 250 ms
- the ratio of distance to measured surface area is 12 : 1 with this instrument
- Laser measurement class
- Laser measurement area
- 2: wavelength 630 nm to 670 nm, output power ≤1 mW
- display: high-contrast black-and-white LCD display, 32 x 29 mm
- temperature limit indication via LED (red, blue)
- setting of the emissivity of the measured surface in the range 1.0, 0.1 during automatic switch-off
on inactivity
- power supply: 9V battery (6F22)
- battery life: continuous temperature measurement with backlight on ≥10 hours
- low battery indicator: yes
- drop test from a height: 3 m
- HI/LO temperature alarm mode (high/low alarm with LED indication / MAX / AVG / MAX / MIN) value
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Operating humidity: <90% RH (non-condensing)
- Operating altitude: max. 12,000 m
- Storage temperature: -20℉ to 60℉-60℉-(-40℉) Colour: red and grey
- Net product weight: 292 g
- Product dimensions: 189 x 118 x 55 mm
Package contents:
- UT309C PRO thermometer: 1 pc
- 9V battery: 1 pc Manual:
- blister pack:
- 1 pc
Packaging for wholesale customers:
- Standard quantity per box: 10 pcs
- standard box dimensions: 430 x 335 x 330 mm
- total box weight: 6.5 kg
MANUFACTURER
–https://www.unitre.com/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT309A PRO Infrared Thermometer
This product comes with a 3-year warranty. The UT309A professional non-contact infrared thermometer can quickly and accurately determine surface temperatures ranging from -35°C to +450°C by measuring the infrared energy radiated from the target surface. The UT309A is a highly durable device, suitable for everyday use. It is drop-resistant from 3m, and its excellent IP65 protection rating ensures good resistance to water and dust. The UT309A has a fixed emissivity of 0.95 and a targeting laser, which indicates the correct aiming of the thermometer. The distance-to-spot ratio is 10:1 with this instrument. The preset functions and measured temperature values are displayed on a high-contrast black-and-white LCD screen, whilst exceeding the temperature limits is indicated by LEDs (red for exceeding the upper limit and blue for the lower limit). It is possible to set a continuous measurement; after 2 minutes, the display backlight turns off, and once the measurement is complete by pressing the trigger button again, the temperature value remains on the display. The temperature measurement time is up to 250 ms in 95% of cases. It is possible to display the minimum, maximum and average temperatures, as well as the difference between the highest and lowest measured temperatures (MIN, MAX, AVG, DIF). The thermometer switches off automatically to reduce power consumption if not used for 8 seconds. This auto-off function can be disabled.
Product specifications:
- infrared thermometer for non-contact measurement of surface temperatures
- temperature range from -35°C to +650°C, switchable to °F
- laser sighting of the measured surface
- The surface-to-distance measurement ratio is the laser diameter. 10:1 with this instrument
- 32 x 29 mm black-and-white backlit LCD display
- Indication of limit value exceedance via LED (red, blue)
- thread for attaching a tripod
Technical specifications:
- Temperature range: -3°C to +4°C (842°F)
- Temperature measurement accuracy ≥0°C: ± 1.8°C or ± 1.8% of the reading, whichever is greater
- Temperature measurement accuracy <0°C: ± (1.8°C + 0.1°C /°C of reading)
- Temperature measurement accuracy, whichever is greater ≥32℉: ± 3.6℉ or ± 1.8% of the reading, whichever is greater
- temperature measurement accuracy <32℉: ± (3.6℉ + 0.1℉/℉ of the reading, whichever is greater)
- temperature measurement resolution: 0.1°C repeatability
-1°C (1.8°F) or 0.8% of reading (whichever is greater)
- spectral response: 8μm to 14μm
- response time in 95% of cases: 250 ms
- the ratio of distance to measured surface area is 10 : 1 with this area measurement instrument
-
- laser measurement area delimitation
- laser: wavelength 630 nm to 670 nm, output power ≤1 mW
- display: high-contrast black-and-white LCD display, 32 x 29 mm
- temperature limits indicated by LEDs (red, blue)
- Fixed emissivity of the measured surface set to 0.95
- 95% idle power consumption
--> (6F22)
- battery life: continuous temperature measurement with backlight on ≥12 hours
- low battery indicator: yes
- drop test from a height: 3 m
- HI/LO temperature alarm mode (high/low alarm with LED indication)
- MAX / MIN / AVG/℃ operating value hold at ≤ 0 / IF / AVG 50℃ (32℉ to 122 ℉)
- Operating humidity: <90% RH (non-condensing)
- Operating altitude: max. 12,000 m
- Storage temperature: -20℃ to 60℃ (-4℉ to 140℉)
- Net weight of the product
-; product: 292 g
- Product dimensions: 189 x 118 x 55 mm
Package contents:
- UT309A PRO thermometer: 1 pc
- 9V battery (6F22): 1 pc
- cover: manual
- blister pack: 1 pc
Packaging for wholesale customers:
- standard quantity per cardboard box: 10 pcs
- standard box dimensions: 430 x 335 x 330 mm
- total box weight: 6.5 kg
MANUFACTURER
–https://www.unitrend.com
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT306C professional non-contact infrared thermometer can quickly and accurately measure surface temperatures ranging from -50 °C to +500 °C by measuring the infrared energy radiated by the target surface. To make aiming the device at the target surface easier and more intuitive, a ring laser is built in, which indicates correct aiming of the thermometer. The distance-to-spot ratio is 12:1 with this device. This thermometer is drop-resistant from a height of 1 metre. It is possible to preset the emissivity of the measured surface within the range of 0.1 to 1.0. The display of preset functions and measured values is provided by a clear, high-contrast EBTN colour display, whilst limit values are indicated by an audible alarm and on the display. It is possible to display minimum, maximum and average temperatures, as well as deviations from the average (MIN, MAX, AVG, DIF). The thermometer switches off automatically to reduce power consumption if left unused for 15 seconds in HOLD mode and 10 seconds in other modes. The temperature measurement time is up to 250 ms in 95% of cases. The device is powered by two 1.5V AAA zinc-manganese or alkaline batteries.
This non-contact infrared thermometer can be used in a variety of fields, such as the food industry, vehicle maintenance, metalworking, cold storage and other industries.
Product specifications for non-contact surface measurement:
- temperature range - 50 °C to +500 °C, can be switched to °F
- the measured surface is delineated by a circular laser pointer
- the ratio of distance to measured surface diameter is 12:1 with this instrument
- EBTN2 colour display contrast x/2 EBTN2 measurement limit value
- 6 mm measurement limit value indicator via a buzzer and on the display
- powered by two 1.5 V AAA ZnMn or alkaline batteries
Technical parameters:
- Temperature range: -50 ℃ to + 500 ℃ (-58 ℉ to + 500 ℃ (-58 ℉ to + 500 ℃ (-58 °F to +500 °C) -50 °C to 0 °C: ± (2 °C + 0.1 °C/°C)
- measurement accuracy between 0 °C and 500 °C: ± 2 °C or ± 2% (whichever is greater)
- measurement accuracy between -58 °F and 32 °F: ± 32 °F
- measurement accuracy between 32 °F and 932 °F: ± 4.0 °F or ± 2% (whichever is greater)
- resolution: 0.1 °C / 0.1 °F
- spectral response: 8μm to 14μm
- response time: 9 ms/≤ 25 ms/distance to measured surface diameter: 12:1
- circular laser measurement area delimitation: yes
- Class 2 ring laser: wavelength 630 nm to 670 nm, output power ≤1 mW
- display: high-contrast EBTN with backlight, measuring 25 x 26 mm; emissivity range 0.1 to 1.0; default 0.95
- measurement lock: yes
- powered by two 1.5 V AAA batteries: ZnMn or alkaline
- ZnMn battery life: continuous temperature measurement ≥6 hours (laser on + display backlight)
- Automatic switch-off when inactive: yes
- low battery indicator: yes 1 m
- Temperature alarm mode: HI / LO (high / low alarm with audible signal)
- MAX / MIN / AVG / DIF hold: yes
- Operating temperature: 0 ℃ to 50 ℃ (32 ℉ to 122 ℉)
- Operating humidity:
- 90% RH: storage temperature: -20 ℃ to 60 ℃ (-4 ℉ to 140 ℉)
- Product colour: red and grey
- Net product weight: 161.5 g
- Product dimensions: 146 x 94.5 x 46 mm
-
UT306C: 1 pc
- 1.5V / AAA batteries: 2 pcs
- cover: 1 blister pack
- manual: 1 pc
Packaging for wholesale customers:
- standard quantity per box: 20 pcs standard box: 20 pcs x box: 755 dimensions
75 mm
MANUFACTURER: UNI-TREND
https://www.uni-trend.cz/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT306A Infrared Thermometer
This product comes with a 3-year warranty. The UT306A is a portable non-contact thermometer. Thanks to its compact design, it is suitable for carrying and everyday use. This device measures temperature based on the infrared radiation of objects and is equipped with a laser pointer, making it easy to measure the temperature of an object from a distance without needing to attach a temperature probe. This measurement method is particularly suitable for measuring hard-to-reach objects and for minimising the influence of the surrounding environment on the measurement result.
Product specifications:
- accurate non-contact digital thermometer with a laser pointer
- measurement in °C and °F, display of minimum, maximum and average temperatures
- 250 ms response time, versatile use, compact dimensions, continuous measurement
Technical specifications:
Measurement units °F:
Measuring range °C: -35 to 300
Measuring range °F: -31 to 572
Resolution: 0.1 °C / 0.2 °F
Measurement deviation: ± 2.0 °C / 4.0 °F or ± 2 % of the measured value (whichever applies) ms
Ratio of field of view length to width: 6 : 1
Emissivity: 0.95
Measured wavelength: 8 μm – 14 μm
Display of minimum, maximum and average temperature
Laser pointer
Measurement lock: Continuous measurement option
Result display >Data display
Backlight
Low battery warning
Auto-off when inactive
Display dimensions: 37.4 x 36.4 mm
Dimensions: 120 x 53 x 28 mm
Power: 3 x AAA batteries (included)
Weight: 0.120 kg Operating temperature
50°C
Relative humidity: < 90%
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT305S professional non-contact infrared thermometer can quickly and accurately determine surface temperatures between -50 °C and +2000 °C by measuring the infrared energy radiated by the target surface. To make aiming the device at the target surface easier and more intuitive, a ring laser is built in, which indicates the correct alignment of the thermometer. The ratio of distance to the diameter of the measured surface is 50:1 with this instrument. This thermometer is drop-resistant from a height of 1 metre. It is possible to preset the emissivity of the measured surface within the range of 0.1 to 1.0. The display of preset functions and measured values is provided by a clear, high-contrast colour EBTN display, whilst limit values are indicated by an audible alarm and on the display. It is possible to display minimum, maximum and average temperatures, as well as deviations from the average (MIN, MAX, AVG, DIF). The thermometer switches off automatically to reduce power consumption if left unused for 15 seconds in HOLD mode and 10 seconds in other modes. The temperature measurement time is up to 250 ms in 95% of cases.
This non-contact infrared thermometer can be used in a variety of fields, such as the food industry, vehicle maintenance, metalworking, cold storage and other industries.
Product specifications:
- Infrared thermometer for measuring surface temperatures
- Temperature range: -50 °C to +2000 °C, switchable to °F
- Laser pointer to mark the measurement area
- Mounting hole for tripod
- Data storage: 99
- The ratio of distance to measured surface diameter is 50:1 with this measuring instrument: EB 1>- contrast with this instrument dimensions 35 x 35 mm
- indication of limit values via a buzzer, on the display and via the three-colour LED
- power supply: 9 V alkaline battery
Technical parameters:
- temperature range: -50 °C to +20 °C (3632 °F)
- measurement accuracy in the range -50 °C to 0 °C: ± (1 °C + 0.1 °C / °C)
- Measurement accuracy between 0 °C and 2000 °C: ± 1 °C or ± 1% (whichever is greater) between 2 °C and 2000 °C; °F: ± (2.0 °F + 0.1 °F / °F)
- measurement accuracy between 32 °F and 3632 °F: ± 2.0 °F or ± 1% (whichever is greater)
- resolution: 0.1 °C / 0.1 °F
- spectral response time at 1/4 μm: 95% of cases: ≤250 ms
- Distance to measured surface diameter: 50:1
- Class 2 ring laser: wavelength 630 nm to 670 nm, output power ≤1 mW
- display: high-contrast EBTN with backlight, measuring area 35 mm/>-5 mm measurement: emission measurement 35 x 3–5 mm in the range from 0.1 to 1.0; default 0.95
- measurement lock: yes
- power supply: 9 V alkaline battery
- battery life: continuous temperature measurement for 10 hours (laser on + display backlight)
- automatic shut-off when inactive: yes
- low battery indicator: yes
- drop-test from a height
- 1 m alarm (High/Low alarm with audible indication)
- MAX/MIN/AVG/DIF hold: yes
- Operating temperature: 5 °C to 50 °C (23 °F to 122 °F)
- Operating humidity: <90% RH (non-condensing; storage temperature: -/>- 6 °C to 20 °C) °C (-4 °F to 140 °F)
- Product colour: red and grey
- Net product weight: 310 g
- Product dimensions: 179 x 126.5 x 53 mm
Package contents:
- thermometer:
- 5 VS/ UTp>- 9 S 1 pc
- cap: 1 pc
- manual: 1 pc
Packaging for wholesale customers:
- standard quantity per cardboard box: 10 pcs
- standard box dimensions: 425 x 335 x 365 mm
UNI-TREND INVOICING
https://www.uni-trend.cz/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT305C+ professional non-contact infrared thermometer can quickly and accurately measure surface temperatures ranging from -50°C to +2200°C by detecting the infrared energy emitted by the target surface. To make aiming the device at the target surface easier and more intuitive, a laser is built in, which indicates when the thermometer is correctly aimed. The distance-to-spot ratio for this device is 55:1. This thermometer has additional built-in functions, e.g. measuring the temperature around the thermometer, measuring temperature with a K-type contact thermocouple, and measuring relative humidity around the thermometer. Based on these measured values, it automatically calculates the dew point temperature or wet bulb temperature. The system time and date can be entered into the thermometer. Measurements can be scheduled at preset intervals and a total of 999 events (data sets) can be stored in the internal memory. It is possible to preset the emissivity of the measured surface within the range of 0.1 to 1.0. The display of preset functions and measured values is provided by a bright, high-contrast colour TFT LCD screen, whilst limit values are indicated by an audible alarm and on the display. It is possible to display minimum, maximum and average temperatures, as well as deviations from the average (MIN, MAX, AVG, DIF). The device is resistant to drops from a height of 1 metre.
This non-contact infrared thermometer can be used in various fields, such as the food industry, vehicle maintenance, transport equipment, metalworking, cold storage and other industries.
Product specifications:
- Infrared thermometer for non-contact surface temperature measurement. -50°C to +2200°C, switchable to °Fahrenheit
- laser pointer to mark the measured surface
- Tripod mounting hole
- The distance-to-spot ratio for this device is 55:1
- High-contrast colour TFT LCD display with a 2/4-digit resolution. Buzzer, on-screen display and three-colour LED function
- setting of scheduled measurements based on system time and storage of 999 events in memory
- data export to a computer in PDF or CSV format
- Power supply: 3.7V/2600mAh lithium battery, type 18650
Infrared (IR) measurement: -50°C to +2200°C (-58°F to 3992°F)
- ambient temperature measurement range: -10°C to +50°C
- Temperature range for Type K thermocouple measurement: -50°C to 1370°C
- Temperature range for K-type thermocouple measurement
- -40°C to 260°C
- resolution: 0.1°C / 0.1°F
- relative humidity measurement range: 10 to 80% RH
- IR measurement accuracy in the range -50°C to 0°C: ±(1°C + 0.1°C of the measurement range/0.1°C of the measurement range/°C) 0°C to 1850°C: ±1°C or ±0.01 × t°C (whichever is greater)
- ambient temperature measurement accuracy: -10°C to 0°C: ±1°C; 0 to 40°C: ±0.5°C; 40°C to 50°C: ±1°C
- thermocouple temperature measurement accuracy: ±(0.005 × t + 1.5)°C
- relative humidity measurement accuracy: ±5% RH
- setting of the emissivity of the measured surface: yes; 0.1 to 1.0 in steps of 0.01, built-in emissivity table
- spectral response: 8μm to 14μm
- ratio of distance to measured surface diameter: 55:1
- Class 2 laser: wavelength 630 nm to 670 nm, output power ≤1 mW EN60825-1:2014
- display: 2.4" diagonal, backlit colour TFT LCD
- display resolution: 320 x 240 pixels
- Trigger lock (continuous measurement): yes
- power supply: 3.7V/2600mAh lithium battery, charging time
600mAh
-5; 3 hours
- continuous operating time: ≥ 20 hours (when fully charged)
- automatic switch-off during inactivity: yes
- low battery indicator: yes
- drop test from a height: 1 m
- temperature alarm mode: HI/LO (high/low alarm with audible suspension indication: MAX /
- AVG /
) yes
- Operating temperature: -10℃ to +50℃ (14℉ to 122℉)
- temperature coefficient: ±0.1°C/°C or ±0.1%/°C - whichever is greater
- Operating humidity: <90% RH (non-condensing storage temperature: -0℃) (-4℉ to 140℉)
- product colour: red and grey
- net product weight: 375 g
- Product dimensions (L x W x H): 124 x 65 x 205 mm
Package contents:
including battery:
- 5 USB cables – 1 pc,
- charging and data cable – USB-C: 1 pc
- Type K contact ball thermocouple with 1 m cable: 1 pc
- user manual: 1 pc
Manufacturer:
UNI-TREND
-
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT305A+ professional non-contact infrared thermometer can quickly and accurately measure surface temperatures ranging from -50°C to +1850°C by detecting the infrared energy emitted by the target surface. To make aiming the device at the target surface easier and more intuitive, a laser is built in, which indicates when the thermometer is correctly aimed. The distance-to-spot ratio for this device is 55:1. This thermometer has additional built-in functions, e.g. measuring the temperature around the thermometer, measuring temperature with a K-type contact thermocouple, and measuring relative humidity around the thermometer. Based on these measured values, it automatically calculates the dew point temperature or wet bulb temperature. The system time and date can be entered into the thermometer. Measurements can be scheduled at preset intervals and a total of 999 events (data sets) can be stored in the internal memory. It is possible to preset the emissivity of the measured surface within the range of 0.1 to 1.0. The display of preset functions and measured values is provided by a bright, high-contrast colour TFT LCD screen, whilst limit values are indicated by an audible alarm and on the display. It is possible to display minimum, maximum and average temperatures, as well as deviations from the average (MIN, MAX, AVG, DIF). The device is resistant to drops from a height of 1 metre.
This non-contact infrared thermometer can be used in various fields, such as the food industry, vehicle maintenance, transport equipment, metalworking, cold storage and other industries.
Product specifications:
- infrared thermometer for measuring surface temperature for/-- infrared temperature range
-50°C to +1850°C, can be switched to °Fahrenheit
- laser pointer for marking the measured surface
- tripod mounting hole
- the ratio of distance to measured surface diameter is 55:1 for this device
- high-contrast colour TFT LCD display with a diagonal of 2/4 limit value. Buzzer, on-screen display and three-colour LED function
- setting scheduled measurements based on system time and storing 999 events in memory
- data export to a computer in PDF or CSV format
- Power supply: 3.7V/2600mAh lithium battery, type 18650
Infrared (IR) measurement: -50°C to +1850°C (-58°F to 3362°F)
- temperature range for ambient temperature measurement: -10°C to +50°C
- Temperature range for Type K thermocouple measurement: -50°C to 1370°C
- temperature range for K-type thermocouple measurement
- -40°C to 260°C
- resolution: 0.1°C / 0.1°F
- relative humidity measurement range: 10 to 80% RH
- IR measurement accuracy in the range -50°C to 0°C: ±(1°C + 0.1°C of the measurement range/0.1°C of the measurement range/°C) 0°C to 1850°C: ±1°C or ±0.01 × t°C (whichever is greater)
- ambient temperature measurement accuracy: -10°C to 0°C: ±1°C; 0 to 40°C: ±0.5°C; 40°C to 50°C: ±1°C
- thermocouple temperature measurement accuracy: ±(0.005 × t + 1.5)°C
- relative humidity measurement accuracy: ±5% RH
- setting of the emissivity of the measured surface: yes; 0.1 to 1.0 in steps of 0.01, built-in emissivity table
- spectral response: 8μm to 14μm
- ratio of distance to measured surface diameter: 55:1
- Class 2 laser: wavelength 630 nm to 670 nm, output power ≤1 mW EN60825-1:2014
- display: 2.4" diagonal, backlit colour TFT LCD
- display resolution: 320 x 240 pixels
- Trigger lock (continuous measurement): yes
- power supply: 3.7V/2600mAh lithium battery, charging time
600mAh
-5; 3 hours
- continuous operating time: ≥ 20 hours (when fully charged)
- automatic switch-off during inactivity: yes
- low battery indicator: yes
- drop test from a height: 1 m
- temperature alarm mode: HI/LO (high/low alarm with audible suspension indication: MAX /
- AVG /
) yes
- Operating temperature: -10℃ to +50℃ (14℉ to 122℉)
- temperature coefficient: ±0.1°C/°C or ±0.1%/°C - whichever is greater
- Operating humidity: <90% RH (non-condensing storage temperature: -0℃) (-4℉ to 140℉)
- product colour: red and grey
- net product weight: 375 g
- Product dimensions (L x W x H): 124 x 65 x 205 mm
Package contents:
Package contents:
- 1 x USB charger
- 5 pcs. and data cable – USB-C: 1 pc
- Type K contact ball thermocouple with 1 m cable: 1 pc
- user manual: 1 pc
Packaging for bulk customers:
- standard quantity per cardboard box: 1 pc
- Standard carton dimensions: 10365 x 303 mm
Manufacturer:
UNI-TREND
-
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT303D+ non-contact thermometer is a durable and easy-to-use infrared thermometer offering high accuracy (95%), energy efficiency and repeatability. It features an adjustable visual/audio high and low temperature alarm with a response time of less than 250 ms, helping you to quickly detect anomalies. You can preset and save 5 sets of emissivity values and quickly switch the emissivity setting for different surfaces to achieve more accurate results. With measurement hold, MAX/MIN/AVG/DIFF hold and tripod mounting, the UT303D+ is ideal for processes requiring temperature monitoring. The UT303D+ can be used for the inspection of power distribution/transmission equipment, HVAC/equipment maintenance, vehicle troubleshooting and other applications. Backlit EBTN colour display. Can be attached to a tripod with a standard threaded hole.
Product specifications:
- Measured temperature range: -32 to 1300 °C
- Units of measurement: °C/°F
- ratio of measurement distance to measurement area diameter: measurement possible at an emission area of 0.1 to 1.0
- large multi-line LCD display EBTN 35 x 35 mm
- dual laser
- storage of 99 groups of temperature measurements
- date and time display
- user-defined visual and audible alarm
- not for medical use
laser lines that converge at the point where the thermometer measures the temperature. The lasers intersect exactly at the measurement point, allowing for precise targeting.
Advantages: the dual laser helps to focus on a specific point, which is useful for measuring smaller or more distant areas.
Usage: suitable for applications where high precision is required and where the measured area is smaller (e.g. industrial inspection or measurement of small technical components). Parameters:
- laser power: <1mW (class 2)
- display size: 35 x 35 mm
- Temperature measurement range: -32 °C to 1300 °C (-25.6 °F to 2372 °F)
- D:S ratio: 30 : 1 / 95 % emissivity:
(adjustable, stores 5 preset values)
- response time: ≤ 250 ms (95% measurement)
- spectral response: 8 μm – 14 μm
- accuracy >0°C: ± 1.5°C or ± 1.5%°C
- accuracy ± 0°C ±°C + 0.1°C /°C)
- accuracy >32°F: ± 3.0°F or ± 1.5%
- accuracy ≤32°F: ± (3.0°F + 0.1°F /°F)
- measurement repeatability: 0.7°C or 1.0.7% or 0.7°F hold: yes
- data storage: yes, 99 groups
- Scheduled measurement: yes
- auto-off: yes
- Low battery indicator: yes
- LED alarm: yes for high/low temperature
- Audible warning: yes for high/low temperature
- Tripod measurement mode
- Tripod measurement mode: / AVG / DIFF / Hold
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Storage temperature: -20°C to 60°C (-4°F to 140°F)
- Operating humidity: <90% RH (non-condensing) Drop test: / battery
- Product colour: red and grey
- net product weight: 310 g
- Product dimensions: 179 mm x 126.5 mm x 53 mm
Standard individual package contents:
- box
- UNI-T UT303D+ - carrying case for thermometer
instructions
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT303C+ Infrared Thermometer
This product comes with a 3-year warranty. The UT303C+ infrared thermometer can quickly and accurately determine surface temperatures between -32°C and +1300°C by measuring the infrared energy radiated from the target surface. For easier and more intuitive targeting of the device onto the target surface, a unique ring laser targeting indicator is incorporated, which is offered exclusively by Uni-Trend for its devices. The ratio of distance to the diameter of the measured surface is 30:1 with this instrument. It is possible to preset the emissivity of the measured surface within the range of 0.1 to 1.0 and to save the 5 most frequently used emissivities. Preset functions and measured values are displayed on a clear, high-contrast colour EBTN display, whilst limit values are indicated by red, green and blue LEDs on the top of the device and an audible alarm. You can set the system time and schedule repeated measurements in the future at a set interval, and save up to 99 measured values. The measurement time is also stored for each saved value. For these measurements, you will use the built-in standard socket for mounting on a tripod. The temperature measurement time is up to 250 ms in 95% of cases. It is possible to set minimum and maximum value limits, and measurements outside this range are indicated by an audible and visual signal. It is possible to display minimum, maximum and average temperatures, as well as deviations from the average (MIN, MAX, AVG, DIF).
Product parameters:
- infrared thermometer for non-contact measurement of surface temperatures
- temperature range: -32°C to +1300°C, switchable to °F > circular measurement area
display
- setting and storage of 5 emissivity values
- the distance-to-spot ratio is 30:1 with this instrument
- high-contrast EBTN colour display, 35 x 35 mm
- limit values indicated by red, green and blue LEDs, and temperature/temperature programming range
measurement
- memory for 99 measurement sets
- Tripod mounting hole
Technical parameters:
- temperature range: -32°C to 1300°C (-25.6°F to 2372°F)
- temperature measurement accuracy: ± 0°C: ± 1°C: ≥ 1°C. 1.5% of the measurement, whichever is greater
- Temperature measurement accuracy <0°C: ± (1.5°C of the reading + 0.1°C/°C, whichever is greater)
- Temperature measurement accuracy ≥32°F: ± 3.0°F or ± 1.5% of the reading, whichever is greater
±3°F (3.0°F reading + 0.1°F / °F, whichever is greater)
- measurement repeatability: 0.7 °C or 0.7% (1.5 °F or 0.7% of the reading, whichever is greater)
- spectral response: 8μm to 14μm
- response time ratio: 95% of cases within 95% of the distance to the measured surface diameter is 30:1 with this instrument
- circular laser measurement area delimitation: yes
- Class 3R circular laser: wavelength 630 nm to 670 nm, output power ≤3 mW
- Display: high-contrast EBTN with backlighting, showing the measurement limit value 35 x 35 mm
- Setting of the emissivity of the measured surface in the range from 0.1 to 1.0
- 5 types of emissivity can be stored in memory
- 5 sets of high/low temperature warning presets can be stored
- monitoring lock for processes requiring a long temperature programming interval
- measurement
- memory for 99 sets of measurements
- automatic switch-off when inactive
- Power supply: 9V battery (1604A)
- battery life: continuous temperature measurement ≥8 hours
- low battery indicator: yes
- drop test from a height: 1 m
- MAX mounting
- MIN / AVG / DIF values
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Operating humidity: <90% RH (non-condensing)
- Storage temperature: -20°C to 60°C (-4°F to 140°F)
- Net weight of product
-; product: 310 g
- Product dimensions: 172 x 113.5 x 53 mm
Package contents:
- UT303C+ thermometer: 1 pc
- 9V battery: 1 pc
- cap: 1 pc blister pack:
- 1 pc
Packaging for wholesale customers:
- standard quantity per cardboard box: 10 pcs
- standard box dimensions: 425 x 335 x 365 mm
- total box weight: 6.65 kg
MANUFACTURER:
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT301D+ non-contact thermometer is a durable and easy-to-use infrared thermometer offering high accuracy (95%), energy efficiency and repeatability. It features an adjustable visual/audio high and low temperature alarm with a response time of less than 250 ms, helping you to quickly detect anomalies. You can preset and save 5 sets of emissivity values and quickly switch the emissivity setting for different surfaces to achieve more accurate results. With measurement hold, MAX/MIN/AVG/DIFF hold and tripod mounting, the UT301D+ is ideal for processes requiring temperature monitoring. The UT301D+ can be used for the inspection of power distribution/transmission equipment, HVAC/equipment maintenance, vehicle troubleshooting and other applications. Backlit EBTN colour display. Can be attached to a tripod with a standard threaded socket.
Product specifications:
- Measuring range: -32 to 600 °C
- Units of measurement: °C/°F
- ratio of measurement distance to measurement area diameter: 1 emissivity option
- 12 surface emissivity options: 0.1 to 1.0
- large multi-line LCD display EBTN 30 x 30 mm
- dual laser
- storage of 99 groups of temperature measurements
- date and time display
- User-defined visual and audible alarm
- Not for medical use
Principle: lines that converge at the point where the thermometer measures the temperature. The lasers intersect exactly at the measurement point, allowing for precise targeting.
Advantages: the dual laser helps to focus on a specific point, which is useful for measuring smaller or more distant areas.
Usage: suitable for applications where high precision is required and where the measured area is smaller (e.g. industrial inspection or measurement of small technical components). Parameters:
- laser power: <1mW (Class 2)
- display size: 30 x 30 mm
- Temperature measurement range: -32 °C to 600 °C (-25.6 °F to 1112 °F)
- D:S ratio: 12 : 1/90% emissivity:
- (adjustable, stores 5 preset values)
- response time: ≤ 250 ms (95% measurement)
- spectral response: 8 μm – 14 μm
- Accuracy >0°C: ± 1.5°C or ± 1.5%°C
- accuracy ± 0°C ±°C + 0.1°C /°C)
- accuracy >32°F: ± 3.0°F or ± 1.5%
- accuracy ≤32°F: ± (3.0°F + 0.1°F /°F)
- measurement repeatability: 0.7°C or 1.0.7% or 0.7°F hold: yes
- data storage: yes, 99 groups
- Scheduled measurement: yes
- auto-off: yes
- Low battery indicator: yes
- LED alarm: yes for high/low temperature
- Audible warning: yes for high/low temperature
- Tripod measurement mode
- Tripod measurement mode: / AVG / DIFF / Hold
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Storage temperature: -20°C to 60°C (-4°F to 140°F)
- Operating humidity: <90% RH (non-condensing) Drop test: / battery
- Product colour: red and grey
- net product weight: 204 g
- Product dimensions: 160 mm x 74 mm x 48 mm
Standard individual package contents:
- box
- UNI-T UT301D++ carrying case
-/
user manual
-/
