In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Pytes V5° battery with built-in heating
How does it work?
The integrated battery heating system is powered exclusively by the charging source, such as the inverter or charge controller (regardless of the devices supplying current to charge the battery). The heater draws up to 180 W from the charging source (per battery) and will heat the battery by up to 10°C per hour. The heater operates within a typical operating range of -20°C to 10°C. If the battery temperature drops below 5°C, the heater will switch on, using power from the charging source to raise the temperature to 10°C. If the battery temperature is between 2°C and 5°C, the heater will switch on and the battery will be charged (at the same time) until the battery reaches a temperature of 10°C, at which point the heater will switch off and the battery will continue to be charged. If the battery is below 2°C, the charging current will be directed solely to the heating system until the battery rises above 5°C, at which point the battery will charge normally. The heating system will not affect the battery’s SOC.
The Pytes V5° battery requires 4U of space to allow the bus to connect correctly between batteries and to facilitate adequate cooling. For example, you will need a server rack of at least 12U to allow for the installation of three batteries.
Features:
- Charging below freezing point
- Long-life battery module integrated with LFP cells, with a lifespan of ≥6000 cycles
- Intelligent energy management with sophisticated BMS to maximise reliability and longevity, remote update
- Easy connection: up to 300 A in parallel
- High charge/discharge rate: fully charged in 1 hour, high output power (1C)
Specifications:
Nominal voltage: 51.2 V
Rated capacity: 100 Ah
Nominal energy: 5.12 kWh
Chemistry: Lithium Iron Phosphate (LiFePO4)
Maximum continuous charging current: 100A (1C)
Maximum continuous discharge rate: 100A (1C)
Communication protocol: RS485, CAN
Dimensions (L*W*H): 44cm x 53cm x 14cm
Weight: ~44kg
Included with the battery:
2 x 300A flexible busbars
1 CAN / RS485 daisy-chain communication cable
1 x 10AWG earthing cable
Download the technical data sheet
Download the list of compatible inverters (CAN/RS485)
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DYNESS Powerbox G2 is a state-of-the-art LiFePO4 battery, designed for high performance, maximum safety and flexible installation. With its compact design, low weight and IP65 protection, it is ideal for residential and commercial applications, suitable for both indoor and outdoor installation.
This model comes equipped with an active fire suppression system, an integrated WiFi module for real-time monitoring and an optional heating function for low temperatures, making it a top choice for any modern photovoltaic system.
Key technical specifications:
Battery type: LiFePO4
Total energy: 10.24kWh
Usable energy: 9.728kWh
Rated capacity: 200Ah
Nominal voltage: 51.2V
Operating voltage: 44.8 – 57.6V
Nominal charge/discharge power: 5.12 kW
Maximum discharge power: 10.24 kW
Maximum discharge current: 200A
Recommended current: 100A
Recommended depth of discharge (DoD): 90%
Cycle life: Unlimited (10-year warranty)
Operating temperature: 0 ~ 55°C
Discharge temperature: -20 ~ 55°C (with heating function)
Weight: 95 kg (without front panel); 98 kg (with glass front panel)
Dimensions: 710 x 165 x 640 mm
Protection: IP65 – ideal for outdoor installation
Communication: CAN / RS485
Expandability: up to 12 units in parallel
Fire suppression system: Integrated
WiFi module: Included – APR OTA function
Heating function: Yes
Certifications: UN38.3, IEC62619, EC62040, CE, CE RED
Inverter compatibility: Growatt, Deye, Victron, Goodwe, SMA, Solis, Sungrow etc.
Smart and compact design
15% lighter and 30% more compact than previous versions, the Powerbox G2 is easy to install on a wall or floor, offering maximum flexibility without sacrificing performance.
Safety and full connectivity
The active fire protection system and smart connectivity features make this battery a safe and efficient choice for any type of modern solar installation.
✅ Energy capacity: 10.24 kWh
✅ Nominal capacity: 200Ah
✅ Operating voltage: 44.8V – 57.6V
✅ IP rating: IP65
✅ Fire suppression system: Integrated
Download technical data sheet
Download the list of compatible inverters
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DYNESS PowerBrick is an advanced battery module featuring LiFePO4 technology, designed for applications requiring high energy storage capacity and long-term reliability. With a modular design, high performance and impressive scalability (up to 716.8kWh without HUB), this battery is ideal for residential, commercial or industrial photovoltaic systems.
Key technical specifications:
Battery type: LiFePO4 (Lithium Iron Phosphate)
Nominal energy: 14.33kWh
Nominal voltage and capacity: 51.2V / 280Ah
Recommended charge/discharge current: 140A (0.5C)
Maximum charge/discharge current: 200A
Continuous discharge power: up to 10kW
Depth of discharge (DoD): 95%
Communication: CAN / RS485
Cycle life: Unlimited / 10-year warranty
Protection: IP20
Weight: 114 kg
Dimensions (L x W x H): 435 x 233 x 867 mm (without wall bracket)
Maximum number of parallel modules: 50
Operating temperature (charging): 0 ~ 55°C
Operating temperature (discharge): -20 ~ 55°C
WiFi module: Integrated – with OTA APP functions
Fire suppression system: Optional – aerosol system
Certifications: UN38.3, CE
Inverter compatibility: SMA, Victron, Ingeteam, Deye, Solis, Goodwe, Voltronic, Sungrow, etc.
Consistent performance and compact design
Compared to the previous generation, the DYNESS PowerBrick has a 24% smaller footprint and 40% greater capacity, whilst maintaining a robust and reliable build. Its vertical, modular design makes it easy to integrate into any technical space.
Advanced safety and unlimited scalability
With an optional fire suppression system (aerosol) and an impressive number of unlimited life cycles (under warranty), the DYNESS PowerBrick can be scaled up to 716.8 kWh without requiring an additional HUB.
✅ Energy capacity: 14.33kWh
✅ Nominal capacity: 280Ah
✅ WiFi module: Integrated – with OTA app functions
✅ Warranty: 10 years
Download the technical data sheet
Download manual
Download list of compatible inverters
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DYNESS DL5.0C is a high-performance LiFePO4 battery, ideal for small-scale residential and commercial applications. With a capacity of 5.12kWh and a rated current of 100Ah, this module offers flexibility and efficiency in solar energy storage. It can be used in both on-grid and off-grid systems, being compatible with inverters from renowned brands such as Growatt, Deye, Victron, Goodwe and Solis.
Technical specifications:
Battery type: LiFePO4 (Lithium Iron Phosphate)
Energy capacity: 5.12kWh
Nominal capacity: 100Ah
Nominal voltage: 51.2V
Operating voltage: 44.8V – 57.6V
Maximum discharge current: 100A (1C)
Recommended charge/discharge current: 50A
Peak discharge current (15s): 110A
Depth of discharge (DoD): 90%
Cycle life: >6000 cycles
Operating temperature: -20°C ~ +55°C
Built-in heating system: Yes – operates automatically in low-temperature conditions
IP rating: IP20
Dimensions: 558x515x190 mm
Weight: 45 kg
Scalability: up to 16 units in parallel
Communication: CAN/RS485/RS232
Advanced monitoring and extended compatibility
The DYNESS DL5.0C allows monitoring via an app (optional), offering real-time control and remote firmware updates. It features a modular design with flexible mounting options: wall-mounted, floor-standing or in a stacked configuration.
Safety and durabilityThe high-safety LFP cells are equipped with balancing functions, and the integrated heating system ensures optimal performance even at low temperatures. The battery is designed for long-lasting, safe and efficient operation.
✅ Built-in heating system
✅ Energy capacity: 5.12kWh
✅ Nominal capacity: 100Ah
✅ Operating voltage: 44.8V – 57.6V
✅ IP protection: IP20
Download the technical data sheet
Download the list of compatible inverters
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Pomega PBW-51100 solar battery is an excellent choice for energy storage in solar power systems, offering superior performance and long-term reliability. Featuring LiFePO4 (Lithium Iron Phosphate) technology, this battery stands out for its increased durability, high safety and optimal energy efficiency, and is compatible with a wide range of inverters.
Ideal for residential and commercial applications, the Pomega PBW-51100 battery has a capacity of 5.12kWh, making it perfect for ensuring a constant flow of energy from photovoltaic sources. Its compact design and advanced protection make it a reliable solution for any type of solar installation.
Key features:
? Storage capacity – 5.12kWh, ideal for daily energy consumption.
⚡ Maximum charge/discharge current – 100A for a stable energy flow.
? Extended lifespan – Over 6,000 cycles, ensuring long-lasting performance.
?️ Wide operating temperature range – Operates efficiently between -10°C and 55°C.
? Advanced communication – Compatible with CAN and RS485 for easy integration into existing systems.
? Scalability – Allows up to 8 units to be connected in parallel for extended capacity.
✅ Comprehensive BMS protection – Integrated protection against overvoltage, overcurrent and other risks.
Technical specifications:
Battery type: LiFePO4 – Prismatic
Nominal voltage: 51.2V
Nominal capacity: 100Ah
Nominal energy: 5.12kWh
Operating voltage range: 44V - 56.8V
Standard charge/discharge current: 50A / 50A
Maximum charge/discharge current: 100A / 100A
Service life: ≥6000 cycles
Operating temperature: Charging 0–50°C / Discharging –10 to 55°C
Communication: CAN, RS485
Protections: UV, OV, OC, UT, OT, SC
Inverter compatibility: Deye, Victron, Senergy, Growatt, Hopewind
Dimensions: 445x610x185mm
Protection: IP65
The Pomega PBW-51100 battery is perfect for those seeking an efficient and safe solar energy storage solution. Whether for a residential or commercial photovoltaic system, this battery will ensure consistent performance and long-term reliability.
Download the technical data sheet
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Pomega PBL-51100 photovoltaic battery is the ideal solution for energy storage in residential and commercial photovoltaic systems. Featuring LiFePO4 (lithium iron phosphate) technology, this battery offers an extended service life, superior safety and high efficiency, and is compatible with a wide range of inverters.
Key features:
? Optimal storage capacity – 5.12kWh of energy, sufficient for a variety of applications.
⚡ High performance – Maximum charge/discharge current of 100A, ensuring a stable power supply.
? Extended service life – ≥6,000 cycles, for long-term use.
?️ Reliable operation in various conditions – Wide operating temperature range (-10°C to 55°C).
? Advanced connectivity – CAN and RS485 communication for smart integration.
? High scalability – Up to 8 units can be connected in parallel for extended capacity.
✅ Advanced BMS protection – Integrated system for protection against overvoltage, overcurrent, undervoltage and other risks.
Technical data:
Battery type: LiFePO4 – Prismatic
Nominal voltage: 51.2V
Nominal capacity: 100Ah
Nominal energy: 5.12kWh
Operating voltage range: 44V - 56.8V
Standard charge/discharge current: 50A / 50A
Maximum charge/discharge current: 100A / 100A
Service life: ≥6000 cycles
Operating temperature: Charging 0–50°C / Discharging -10 to 55°C
Communication: CAN, RS485
Protections: UV, OV, OC, UT, OT, SC
Inverter compatibility: Deye, Victron, Senergy, Growatt, Hopewind
Dimensions: 446x532x160mm (3.5U, 19 inches)
Protection: IP20
The Pomega PBL-51100 battery is the perfect choice for those seeking energy independence, safety and an efficient solution for solar energy storage. Its easy integration and extensive compatibility make it suitable for both residential and commercial applications.
Download the technical data sheet
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Felicity Solar LifePo4 LUX-Y-48300LG01 15kWh photovoltaic battery is designed to provide a high-capacity, high-efficiency energy storage solution. This battery is ideal for applications requiring the storage of large amounts of energy, making it suitable for both residential and commercial use.
Key features:
Nominal capacity: 300Ah
Nominal voltage: 51.2V
Capacity: 15kWh
Battery type: Lithium (LiFePO4)
Cycle life: Up to 6,000 cycles at 80% DOD (Depth of Discharge)
Charge/discharge efficiency: Over 95%
Operating temperature: -20°C to 60°C
Dimensions: Compact and easy to integrate into various energy storage systems
Weight: Weight reduction compared to traditional lead-acid batteries
Battery Management System (BMS): Integrated for protection against overcharging, over-discharging and overheating
Protection rating: IP21, providing protection for indoor use
Mounting: Wall or floor mounting to save space and facilitate access
Warranty: 10 years
Applications: Suitable for residential, commercial and industrial use
These features make the Felicity Solar LifePo4 LUX-Y-48300LG01 15kWh photovoltaic battery an excellent choice for those wishing to improve energy efficiency and optimise long-term operating costs. This battery stands out for its reliability and consistent performance under various operating conditions.
For anyone looking for a reliable and scalable solution for solar energy storage, the Felicity Solar LiFePo4 LUX-E battery is an excellent choice, easily adapting to a variety of energy requirements and contributing to a greener and more self-sufficient home energy system.
✅ Display
✅ Power cables included
✅ CAN/RS485 communication port
✅ Over 6,000 cycles at 80% DOD
✅ Compatible with most low-voltage inverters
✅ 10-year warranty
Download manual
Download technical data sheet
Compatible inverters
Download certificate of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Felicity Solar LUX-E LiFePo4 photovoltaic battery, 12.5kWh, 51.2V, is designed to provide an efficient and sustainable energy storage solution. With a higher capacity, this battery is ideal for applications requiring the storage of large amounts of energy, ensuring superior performance and reliability.
Key features:
Nominal capacity: 250Ah
Nominal voltage: 51.2V
Capacity: 12.5kWh
Battery type: Lithium (LiFePO4)
Cycle life: Up to 6,000 cycles at 80% DOD (Depth of Discharge)
Charge/discharge efficiency: Over 95%
Operating temperature: -20°C to 60°C
Dimensions: Compact and easy to integrate into various energy storage systems
Weight: Weight reduction compared to traditional lead-acid batteries
Battery Management System (BMS): Integrated for protection against overcharging, over-discharging and overheating
Protection rating: IP21, providing protection for indoor use
Applications: Suitable for residential, commercial and industrial use
Mounting: Wall-mounted to save space and facilitate access
These features make the Felicity Solar LUX-E LiFePo4 Photovoltaic Battery, 12.5kWh, 51.2V, an excellent choice for those wishing to improve energy efficiency and reduce long-term operating costs. This battery stands out for its reliability and consistent performance under various operating conditions.
For anyone looking for a reliable and scalable solution for solar energy storage, the Felicity Solar LiFePo4 LUX-E battery is an excellent choice, easily adapting to a variety of energy requirements and contributing to a greener and more self-sufficient home energy system.
✅ Display
✅ Power cables included
✅ CAN/RS485 communication port
✅ Over 6,000 cycles at 80% DOD
✅ Compatible with most low-voltage inverters
✅ 10-year warranty
Download user manual
Download technical data sheet
Compatible inverters
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Felicity Solar LUX-E LiFePo4 photovoltaic battery, 5.12kWh, 51.2V, is an advanced energy storage solution designed to meet modern requirements for efficiency and sustainability. Ideal for a wide range of applications, this battery offers excellent performance and long-term reliability.
Key features:
Capacity: 5.12kWh
Rated capacity: 100Ah
Nominal voltage: 51.2V
Battery type: Lithium (LiFePO4)
Cycle life: Up to 6,000 cycles at 80% DOD (Depth of Discharge)
Charge/discharge efficiency: Over 95%
Operating temperature: -20°C to 60°C
Dimensions: Compact and easy to integrate into various energy storage systems
Weight: Weight reduction compared to traditional lead-acid batteries
Battery Management System (BMS): Integrated for protection against overcharging, over-discharging and overheating
Protection rating: IP21, providing protection for indoor use
Applications: Suitable for residential, commercial and industrial use
Mounting: Wall-mounted to save space and facilitate access
Warranty: 10years
These features make the Felicity Solar LiFePo4 LUX-E 5.12kWh, 51.2V photovoltaic battery an excellent choice for those wishing to improve energy efficiency and reduce long-term operating costs. This battery stands out for its reliability and consistent performance under various operating conditions.
For anyone looking for a reliable and scalable solution for solar energy storage, the Felicity Solar LiFePo4 LUX-E battery is an excellent choice, easily adapting to a variety of energy requirements and contributing to a greener and more self-sufficient home energy system.
✅ Display
✅ Power cables included
✅ CAN/RS485 communication port
✅ Over 6,000 cycles at 80% DOD
✅ Compatible with most low-voltage inverters
✅ 10-year warranty
Download user manual
Download technical data sheet
Compatible inverters
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Discover the Felicity Solar LiFePo4 battery, a highly reliable and long-lasting energy storage system. With an individual capacity of 5.12kWh, this unit is designed to integrate seamlessly into low-voltage systems and is compatible with most 48V inverters. Its key strength is its modularity; up to 8 units can be connected in parallel, allowing the total storage capacity to be expanded up to 40kWh. This feature ensures remarkable scalability, enabling you to adapt your storage system as your energy needs grow.
Furthermore, the Felicity Solar LiFePo4 battery promises a long service life, backed by a generous 10-year warranty, reflecting a commitment to quality and durability. The integrated smart BMS (Battery Management System) ensures safe and efficient operation.
Each battery has a net weight starting from 53 kg, with well-defined dimensions, ensuring simple installation and a minimal footprint. The LED LCD display allows for easy monitoring of battery performance and status, ensuring you are always up to date with the system’s condition.
For anyone looking for a reliable and scalable solar energy storage solution, the Felicity Solar LiFePo4 battery is an excellent choice, easily adapting to varying energy requirements and contributing to a greener and more self-sufficient home energy network.
The Felicity Solar LiFePo4 battery with a capacity of 5.12kWh offers a robust and scalable energy storage solution with the following key technical features:
Capacity: 5.12kWh per unit, expandable up to 40.96kWh by connecting 8 units in parallel.
Battery type: LiFePO4, recognised for its durability and safety in energy storage applications.
Nominal Voltage: 51.2V, compatible with low-voltage systems.
Recommended Charge/Discharge Current: Up to 60A for a single unit and up to 400A for 8 units connected in parallel.
Maximum Charge/Discharge Power: 5kW for a single unit, reaching up to 40kW for the full configuration.
Cycle Life: Over 6,000, ensuring an extended service life.
Temperature Range for Charging: 0–55°C and for discharging from –20 to 55°C, suitable for various operating environments.
Protection Rating: IP21, providing protection for indoor use.
Installation: Floor-mounted for easy integration into homes or technical rooms.
Net Weight: Ranges from 53kg for a single unit to 375kg for the 8-unit configuration.
⇒Click Here for Product Presentation – Video⇐
For anyone looking for a reliable and scalable solution for storing solar energy, the Felicity Solar LiFePo4 battery is an excellent choice, easily adapting to a variety of energy requirements and helping to create a greener and more self-sufficient home energy system.
✅ Display
✅ Power cables included
✅ CAN/RS485 communication port
✅ Up to 8 modules can be connected
✅ Over 6,000 cycles at 80% DOD
✅ Compatible with most low-voltage inverters
✅ 10-year warranty
Download user manual
Download the technical data sheet
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The FLA48460TG2-EU battery from Felicity Solar is a modern energy storage solution based on LiFePO4 (lithium iron phosphate) technology, designed for residential and commercial applications where reliability, safety and efficiency are essential.
With a capacity of 23.5kWh and a nominal voltage of 51.2V, this battery offers high autonomy and stable operation in any type of photovoltaic system. Its compact, floor-mounted design makes it easy to integrate into technical or commercial spaces.
Extended performance and flexibility
The system allows up to 15 units to be connected in parallel, achieving a total capacity of 352.5kWh, ideal for high-consumption applications or future expansion.
Thanks to the integrated smart BMS, the battery constantly monitors critical parameters such as voltage, temperature and current, ensuring safe and optimal operation in all conditions.
Smart control and high compatibility
The battery is compatible with most leading inverters and supports RS485 / CAN communication protocols, facilitating integration into existing systems.
Monitoring can be carried out remotely via a dedicated app, offering complete control over energy consumption and storage.
Advanced safety
The FLA48460TG2-EU is equipped with:
multiple integrated protections (BMS, fuse, circuit breaker)
aerosol fire protection module
durable and safe design for long-term use
Key benefits
✔ High capacity: 23.5kWh✔ Scalable up to 352.5kWh✔ Lifespan ≥ 6,000 cycles✔ Integrated smart BMS✔ Remote monitoring via app✔ Compatible with popular inverters✔ Simple installation – floor-mounted✔ High safety (fire protection included)
Category
Specification
General Information
Model
FLA48460TG2-EU
Battery type
LiFePO4
Performance
Nominal capacity
23.5 kWh
Nominal voltage
51.2V
Operating voltage
44.8 – 57.6V
Max. continuous current
250A
Peak current
500A (15s)
Max. power
12,500W
Lifespan
Life cycles
≥6,000
Discharge depth
≥95%
System & Communication
Communication
RS485 / CAN
Display
LCD + LED
Operating conditions
Operating temperature
0°C ~ +55°C
Discharge temperature
-20°C ~ +55°C
Protection rating
IP21
Installation & Dimensions
Mounting
On the floor
Dimensions
570 x 250 x 980 mm
Weight
186.5 kg
Other
Scalability
Max. 15 units (352.5 kWh)
Warranty
10 years
Equipped with an integrated aerosol fire suppression system and an IP21 protection rating, the Felicity Solar LiFePO4 FLA48460TG2-EU 23.5kWh battery offers a safe, reliable and scalable solution for energy storage in modern photovoltaic systems.
✅ 23.5kWh, 51.2V LiFePO4 battery
✅ Scalable up to 15 units (352.5kWh)
✅ ≥6,000 life cycles
✅ RS485 / CAN communication
✅ Intelligent BMS + multiple protections
✅ 10-year warranty
Download user manual
Download the technical data sheet
