In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE SUN-10K-SG05LP3-EU-SM2 Hybrid Inverter is a powerful three-phase solution designed for residential and small commercial photovoltaic systems. With a rated power output of 10 kW, hybrid functionality, and advanced energy management capabilities, this inverter enables the efficient integration of solar power, battery storage, and a stable energy supply for connected loads. It is the ideal choice for users looking to maximize self-consumption, increase energy independence, and reduce reliance on the utility grid.
Model
SUN-3K-SG05LP3-EU-SM2
SUN-4K-SG05LP3-EU-SM2
SUN-5K-SG05LP3-EU-SM2
SUN-6K-SG05LP3-EU-SM2
SUN-8K-SG05LP3-EU-SM2
SUN-10K-SG05LP3-EU-SM2
SUN-12K-SG05LP3-EU-SM2
Battery Input Data
Battery Type
Lead-acid or Lithium-ion
Battery Voltage Range (V)
40–60
Max. Charging Current (A)
70
95
120
135
190
210
240
Max. Discharge Current (A)
70
95
120
135
190
210
240
Charging Strategy for Li-ion Battery
Self-adaptation to BMS
Number of Battery Inputs
1
PV String Input Data
Max. PV Input Power (W)
6000
8000
10,000
12,000
16,000
20,000
24,000
Max. PV Input Power (W)
4500
6400
8000
9600
12800
16,000
19200
Max. PV Input Voltage (V)
800
Start-up Voltage (V)
160
MPPT Voltage Range (V)
200–650
Rated PV Input Voltage (V)
550
Max. Operating PV Input Current (A)
20+20
20+20
20+20
20+20
26+26
26+26
26+26
Max. Input Short-Circuit Current (A)
30+30
30+30
30+30
30+30
39+39
39+39
39+39
No. of MPP Trackers / No. of Strings MPP Tracker
2 / 1+1
2 / 1+1
2 / 1+1
2 / 1+1
2 / 2+2
2 / 2+2
2 / 2+2
AC Input/Output Data
Rated AC Input/Output Active Power (W)
3000
4000
5000
6000
8000
10,000
12,000
Max. AC Input/Output Apparent Power (VA)
3300
4400
5500
6600
8800
11,000
13200
Rated AC Input/Output Current (A)
4.6/4.4
6.1/5.8
7.6/7.3
9.1/8.7
12.2/11.6
15.2/14.5
18.2/17.4
Max. AC Input/Output Current (A)
5/4.8
6.7/6.4
8.4/8
10/9.6
13.4/12.8
16.7/16
20/19.2
Max. Continuous AC Passthrough (grid to load) (A)
45
Peak Power (off-grid) (W)
2 times rated power, 10s
Power Factor Adjustment Range
0.8 leading to 0.8 lagging
Rated Input/Output Voltage/Range (V)
220/380V, 230/400V, 0.85Un–1.1Un
Rated Input/Output Grid Frequency/Range (Hz)
50/45–55, 60/55–65
Grid Connection Type
3L+N+PE
Total Current Harmonic Distortion THDi
<3% (of rated power)
DC Injection Current
<0.5% In
Efficiency
Max. Efficiency
97.6%
Euro Efficiency
97.0%
MPPT Efficiency
>99%
Equipment Protection
Integrated
DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault circuit interrupter (optional), anti-islanding protection, DC switch, insulation impedance detection, residual current detection
Surge Protection Level
TYPE II (DC), TYPE II (AC)
Interface
Communication Interface
RS485/RS232/CAN
Monitor Mode
GPRS/Wi-Fi/Bluetooth/4G/LAN (optional)
General Data
Operating Temperature Range (℃)
-40 to +60℃, >45℃ Derating
Permissible Ambient Humidity
0–100%
Permissible Altitude
3000 m
Noise (dB)
≤55
Ingress Protection (IP) Rating
IP 65
Inverter Topology
Non-isolated
Overvoltage Category
OVC II (DC), OVC III (AC)
Cabinet Size (WxHxD mm)
386×660×250 (excluding connectors and brackets)
Weight (kg)
35.2
Type of Cooling
Intelligent Air Cooling
Warranty
5 years/10 years
The warranty period depends on the final installation site of the inverter; for further information, please refer to the warranty policy
Grid Regulation
IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105
Safety / EMC Standard
IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
✅ Connection to the national grid (EN 50549-1)✅ Colour display + touchscreen✅ CAN/RS485 communication port✅ Parallel function✅ Generator connection or PV surplus routing✅ 6 programmable periods for battery charging/discharging✅ Operates with or without low-voltage batteries✅ 13,000W input from solar panels✅ 10kW three-phase output power✅ WiFi module included, with free app✅ 10-year warranty
Download technical data sheetDownload EN user manualDownload certificate of conformity
The inverter is suitable for residential use, maximising the rate of self-consumption of solar energy and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by a diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The LUNA2000-5-E0 battery modules are stackable, allowing for quick and easy installation.
Requires the Huawei LUNA2000-5 KW-C0 battery power module, which allows for the installation of up to 3 LUNA2000-5-E0 modules
The price shown is for a single additional LUNA2000-5-E0 battery module (useful if you wish to expand your current battery capacity).
Warranty: 10 years
Download the technical data sheet
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Huawei LUNA2000-5-S0 5kWh battery is compatible with the latest generation of Huawei SUN2000 KTL-L1, Huawei SUN2000 KTL-M0 and Huawei SUN2000 KTL-M1 single-phase hybrid inverters
The modular system consists of a Power Control Module – LUNA2000-5KW-C0 at the top and a LUNA2000-5-E0 battery module, which can be stacked together. This allows for quick and easy installation.
Each battery has an integrated energy optimiser and supports independent charge and discharge management.
The LUNA2000 battery allows for parallel connection of up to 30 kWh thanks to its modular 5 kWh design across its various 5, 10 and 15 kWh models.
The price includes: the power control unit and a 5kWh battery module
Warranty: 10 years
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Huawei LUNA2000-10-S0 10kWh battery is compatible with the latest generation of Huawei SUN2000 KTL-L1, Huawei SUN2000 KTL-M0 and Huawei SUN2000 KTL-M1 single-phase hybrid inverters
The modular system consists of a Power Control Module – LUNA2000-5KW-C0 at the top and two LUNA2000-5-E0 battery modules, which can be stacked together. This allows for quick and easy installation.
Each battery has an integrated energy optimiser and supports independent charge and discharge management.
The LUNA2000 battery allows for parallel connection of up to 30 kWh thanks to its modular 5 kWh design across its various 5, 10 and 15 kWh models.
Price includes: power control unit and two 5kWh battery modules
Warranty: 10 years
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Huawei LUNA2000-10-S0 15kWh battery is compatible with the latest generation of Huawei SUN2000 KTL-L1, Huawei SUN2000 KTL-M0 and Huawei SUN2000 KTL-M1 single-phase hybrid inverters
The modular system consists of a Power Control Module – LUNA2000-5KW-C0 at the top and three LUNA2000-5-E0 battery modules, which can be stacked together. This allows for quick and easy installation.
Each battery has an integrated energy optimiser and supports independent charge and discharge management.
The LUNA2000 battery allows for parallel connection of up to 30 kWh thanks to its modular 5 kWh design across its various 5, 10 and 15 kWh models.
The price includes: the power control unit and three 5kWh battery modules
Warranty: 10 years
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Huawei Backup Box ensures your devices remain powered even in the event of a power cut. In combination with the three-phase inverter series, the Backup Box enables emergency power operation in the event of a grid failure. Installing and operating the Backup Box for solar systems is very straightforward. The device communicates with the inverter simply via a digital input. The switchover time is 1–2 seconds.
Download the technical data sheet
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Communication cable used for monitoring and configuring equipment from the following series:
IPower-Plus, IPower, NPower, Tracer-AN (50–100A), Tracer-AN (10–40A), XTRA, Triron, VS-BN, Tracer-BN, LS-B, MSC-N, and GoMate.
Length: 1.5m
Connectors: USB and RJ45
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Display and Wi-Fi
The display shows the battery, inverter and solar charge controller parameters. The same parameters can be accessed via a smartphone or other Wi-Fi-enabled device. In addition, Wi-Fi can also be used to configure the system and change settings.
The integrated GX device includes:
• a BMS-Can interface. This can be used to connect to a compatible battery controlled via the CAN bus. Please note that this is not a VE.Can-compatible port;
• a USB port;
• an Ethernet port;
• a VE.Direct port.
The GX device controls the MultiPlus-II and SmartSolar MPPT via a VE.Bus and a VE.Direct connection.
Technical specifications:
PowerControl & PowerAssist Yes
32A transfer switch
Maximum AC input current 32A
Continuous output power at 25 °C 3000VA
Maximum power 5500W
Maximum efficiency % 94
Maximum battery charging current 70A
Battery temperature sensor Yes
Programmable relay Yes
Operating temperature range: -20 to +45 °C (fan-assisted cooling)
IP21 protection rating
Weight 26 kg
Dimensions (H x W x D) mm 499 x 268 x 237
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
All-in-one photovoltaic solution
The Victron EasySolar-II GX incorporates the following components:
- A MultiPlus-II inverter/charger
- A SmartSolar MPPT-Tr photovoltaic charge controller
- A GX unit with a 2x16 character display
These components are combined into a single unit. This greatly simplifies installation, reducing both cost and time required.
Display and Wi-Fi
The display shows the parameters of the battery, the inverter and the solar charge controller.
The same parameters can be accessed using a smartphone or another device with built-in Wi-Fi.
GX device
The integrated GX device includes:
- A VE.Can interface that can be used to connect to VE.Can devices (e.g. VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a Li-Ion CAN-bus battery.
- A USB port
- An Ethernet port
- A VE.Direct port
Selected technical specifications:
AC power at 25 °C (VA) 3000;
Maximum power (W) 5500;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Mains charging current (A) 35;
Max. solar charge (W) 4000;
Operating temperature -40 to +65°C;
Dimensions (mm) 506 x 275 x 237;
Weight (kg) 28
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Display and Wi-Fi
The display shows the battery, inverter and solar charge controller parameters. The same parameters can be accessed via a smartphone or other Wi-Fi-enabled device. In addition, Wi-Fi can also be used to configure the system and change settings.
The GX device
The integrated GX device includes:
• a BMS-Can interface. This can be used to connect to a compatible battery controlled via the CAN bus. Please note that this is not a VE.Can-compatible port;
• a USB port;
• an Ethernet port;
• a VE.Direct port.
The GX device controls the MultiPlus-II and SmartSolar MPPT via a VE.Bus and a VE.Direct connection.
Technical specifications:
PowerControl & PowerAssist Yes
50A transfer switch
Maximum AC input current 50A
Continuous output power at 25 °C 5000VA
Maximum power 9000W
Maximum efficiency % 96
Maximum battery charging current 70A
Battery temperature sensor Yes
Programmable relay Yes
Operating temperature range: -20 to +45 °C (fan-assisted cooling)
IP21 protection rating
Weight 38.6 kg
Dimensions (H x W x D) mm 604 x 323 x 253
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by a diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel function
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without low-voltage batteries
✅ 10,400W input from solar panels
✅ 8kW three-phase output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download user manual (EN)
Download user manual (RO)
Download certificate of conformity
The inverter is suitable for residential use, maximising the rate of self-consumption of solar energy and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by the diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
ESS (Energy Storage System) functionality
The Multiplus-II is a multifunctional inverter/charger featuring all the options of the MultiPlus, plus an external current sensor that extends the PowerControl and PowerAssist functions to 50A and 100A respectively. The Multiplus-II is ideal for off-grid applications in the marine, yachting, automotive and land-based sectors. It also includes an anti-islanding function and a growing list of country-specific approvals for ESS functionality. A number of system configurations are possible.
PowerControl and PowerAssist – Increasing grid or generator capacity
A maximum grid or generator current can be set. The Multiplus-II will then take other AC consumers into account and use the excess energy produced to charge the batteries, thereby preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the PowerControl function and takes it to the next level. Where maximum power is required only for a certain period of time, the Multiplus-II will compensate for insufficient power from the generator or grid using the batteries, and when consumption drops, the surplus power is used to recharge the batteries.
Two AC outputs per side
The Multiplus-II takes over the supply to connected loads in the event of a mains failure or when the generator is disconnected. This happens very quickly (in less than 20 milliseconds), so PCs and other electronic equipment will continue to operate without interruption. The secondary output is active only when AC is available at the Multiplus-II input. Loads that should not discharge the battery, such as a boiler, can be connected to this output.
Technical specifications:
AC power at 25 °C (VA) 3000;
Maximum power (W) 5500;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Mains inrush current (A) 70;
Max. efficiency (%) 94;
Operating temperature -40 to +65°C;
Dimensions (mm) 506 x 275 x 147;
Weight (kg) 18;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter combines a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch within a single compact enclosure. In addition to these core functions, the Multiplus offers numerous advanced features.
Selected technical specifications:
AC power at 25 °C (VA) 500;
Maximum power (W) 900;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Max. efficiency (%) 90;
Operating temperature -40 to +65°C;
Dimensions (mm) 311 x 182 x 100;
Weight (kg) 4.4;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
Selected technical specifications:
AC power at 25 °C (VA) 800;
Maximum power (W) 1600;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Max. efficiency (%) 92;
Operating temperature -40 to +65°C;
Dimensions (mm) 360 x 240 x 100;
Weight (kg) 6.4;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter combines a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features. Selected technical specifications: AC power at 25 °C (VA) 1200; Maximum power (W) 2400; AC input voltage (V) 187–265; AC output voltage (V) 230; Input voltage (V DC) 9.5–17; Max. efficiency (%) 93; Operating temperature –40 to +65°C; Dimensions (mm) 406 x 250 x 100; Weight (kg) 8.2;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
Selected technical specifications:
AC power at 25 °C (VA) 1600;
Maximum power (W) 2800;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 470 x 265 x 120;
Weight (kg) 10.2;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter combines a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch within a single compact enclosure. In addition to these core functions, the Multiplus offers numerous advanced features.
Selected technical specifications:
AC power at 25 °C (VA) 2000;
Maximum power (W) 3500;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 470 x 265 x 120;
Weight (kg) 15;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus inputs.
Technical specifications:
AC power at 25 °C (VA) 2000;
Maximum power (W) 4000;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Mains charging current (A) 80;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 522 x 255 x 125;
Weight (kg) 10;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus inputs.
Technical specifications:
AC power at 25 °C (VA) 3000;
Maximum power (W) 6000;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Mains charging current (A) 120;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 362 x 258 x 218;
Weight (kg) 18;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The MultiPlus-II can be used in both grid-connected and off-grid photovoltaic systems, as well as in other renewable energy systems. It is compatible with both solar charge controllers and grid-connected charge controllers.
The main output is uninterruptible. In the event of a power cut or when the shore supply/generator is disconnected, the MultiPlus-II takes over the power supply to connected loads. The second output is live only when AC power is available at the MultiPlus-II input. Loads that do not drain the battery, such as a water heater, can be connected to this output.
Product details
PowerControl & PowerAssist Yes
32A transfer switch
Maximum AC input current 32A
Continuous output power at 25 °C 3000VA
Maximum power 5500W
Maximum efficiency % 93
Maximum battery charging current 120A
Battery temperature sensor Yes
Programmable relay Yes
Operating temperature range: -40 to +65 °C (fan-assisted cooling)
IP22 protection rating
Weight 19 kg
Dimensions (H x W x D) mm 546 x 275 x 147
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The SUN-30K-SG01HP3-EU-BM3 is a three-phase hybrid inverter capable of operating with a 160–800 V high-voltage battery, ensuring system efficiency and reduced heat dissipation. With a compact design and high power density, this series supports a DC/AC ratio of 1.3, saving on equipment investment. It supports unbalanced three-phase output, expanding application scenarios.
During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to enable prosumer applications.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to provide efficient and reliable products. For example, Deye adopts the T-type three-level topology and the enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to conventional SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel operation of up to 10 units
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without high-voltage batteries
✅ 39,000W input from solar panels
✅ 30kW three-phase output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download EN user manual
Download certificate of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The SUN-40K-SG01HP3-EU-BM4 is a three-phase hybrid inverter capable of operating with a 160–800 V high-voltage battery, ensuring system efficiency and reduced heat dissipation. With a compact design and high power density, this series supports a DC/AC ratio of 1.3, saving on equipment investment. It supports unbalanced three-phase output, expanding application scenarios.
During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to enable prosumer applications.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel operation of up to 10 units
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without high-voltage batteries
✅ 52,000W input from solar panels
✅ 40kW three-phase output
✅ WiFi module included, with free app
✅ 10-year warranty
Download technical data sheet
Download user manual (EN)
Download user manual (RO)
Download certificate of conformity
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The SUN-50K-SG01HP3-EU-BM4 is a three-phase hybrid inverter capable of operating with a 160–800 V high-voltage battery, ensuring system efficiency and reduced heat dissipation. With a compact design and high power density, this series supports a DC/AC ratio of 1.3, saving on equipment investment. It supports unbalanced three-phase output, expanding application scenarios.
During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy then charges the battery or is fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to enable prosumer applications.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel operation of up to 10 units
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without high-voltage batteries
✅ 65,000W input from solar panels
✅ 50kW three-phase output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download technical data sheet
Download user manual (EN)
Download user manual (RO)
Download certificate of conformity
