In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT204R Clamp Multimeter
This product comes with a 3-year warranty. The UT204R digital clamp meter is used to measure AC and DC voltages up to 600V, AC and DC currents up to 600A, and frequencies from 10Hz to 60kHz up to 1600V for low voltage. 10MHz for low voltage. It features protection against voltages exceeding 600V across all ranges, as well as an audible and visual alarm. Four-digit multi-segment display measuring 37 x 25 mm with backlighting and fast refresh rate (3 times/s). The jaw opening allows measurement on cables with a diameter of up to 28 mm. The non-contact electric field sensor (NCV) enables the detection of live conductors at two sensitivity levels – EFLo and EFHi – for low-voltage distribution at 110V/50/60Hz and 230V/50/60Hz. Probe supplied – the tip cap on the test leads allows measurement of LV distribution in CAT III without the risk of arcing. Without tip caps, the test leads can only be used on low-voltage distribution lines in CAT II. With the included Type K thermocouple (nickel-chromium-nickel-silicon temperature sensor), it allows temperature measurement from -40°C to 1000°C. Power supply: 2 x 1.5V R03 batteries. The meter’s power consumption is approx. 1.8 mA. The circuit has an automatic power-saving function. Sleep mode consumption is <11μA, which effectively extends the battery life to approximately 400 hours.
Product parameters:
- measurement of voltage, current and high-voltage frequency up to 600 V
- frequency measurement from 10 Hz to 10 MHz
- Measurement capabilities
- 60 mF
- Temperature measurement from -40 to +1000 °C
- Measurement of the (relative) ratio of voltages and capacitances
- multi-segment display and audible/visual alarm
- protection against voltages exceeding 600 V in intervals
- Non-contact detection of live voltages and switching accuracy of live conductors
-
guaranteed within the range of 1% to 100% of the range
Technical parameters:
1. AC current measurement (ranges / resolution / accuracy):
60.00A / 0.010A / 50Hz ~ 100Hz ± (2.0% +5)
600.0A / 0.100A / 50Hz ~ 100Hz ± (2.0% + 5) The accuracy of AC frequency monitoring in the range from 50 to 100 Hz is ± (1.0% + 5) at a resolution of 0.1 Hz
- overload protection at 620 A
2. DC current measurement (ranges / resolution / accuracy):
60.00 A / 0.010 A / ± (2.0% + 5)
600.0 A / 0.100 A / ± (2.0% + 5)
- overload protection at 620 A
>
>
6,000V / 0.001V / 10Hz ~ 10kHz ± (1.0% +5)
60.00V / 0.010V / 10Hz ~ 10kHz ± (0.8% / 0.0% +5) / 10Hz ~ 10kHz ± (0.8% +5)
- frequency monitoring accuracy when measuring AC voltage in the range from 10 Hz to 60 kHz ± (0.5% + 2) at a resolution of 0.01 Hz to 0.01 kHz
- input overload protection
- 0.01 kHz
- overload protection
- 60/0 V rm. 10 MΩ
4. DC voltage measurement (range / resolution / accuracy):
600.0 mV / 0.100 mV / ± (0.7% +3)
6,000 V / 0.001 V / ± (0.5% +2)
60.00 V / 0.010 V / 0.010 V / 0.010 V / 0.010 V / ±0.001 V / ± (0.5% +2) / 0.100 V / ± (0.5% +2)
- input impedance approx. 10MΩ
- overload protection at 600 Vrms
5. Resistance measurement (ranges / resolution / accuracy):
600.0Ω / 0.1Ω / ± (1.0% +2)
6,000 kΩ / 0.001 kΩ / ± (0.8% +2)
60.00 kΩ / 0.01 kΩ / 0.01 kΩ / 60.8 kΩ ±2.0 kΩ 0.1 kΩ / ± (0.8% +2)
6,000 MΩ / 0.001 MΩ / ± (2.5% +5)
60.00 MΩ / 0.01 MΩ / ± (2.5% +5)
- overload protection at 600 Vrms open circuit
- approx. 1V
6. Capacitance measurement (ranges / resolution / accuracy):
60.00 nF / 0.01 nF / ± (4.0% +5)
600.0 nF / 0.1 nF / ± (4.0% +5)
6000 μF / 0.001 μF / ±4.0% +5)
60.00 μF / 0.01 μF / ± (4.0% +5)
600.0 μF / 0.1 μF / ± (4.0% +5)
6,000 mF / 0.001 mF / ± 10.0%
- overload protection at 600 Vrms
7. Temperature measurement (ranges / resolution / accuracy):
-40°C to +40°C / 1°C / ± 4°C
+40°C to +500°C/1°C / ± (1.5% +5)
+500°C to +1000°C/±2°C/1.5°C
-40°F to +104°F / 1°F / ± 6°F
+104°F to +932°F / 1°F / ± (2.0 +6)
+932°F to +1832°F / 1°F / ± 4
%
Frequency and load measurement (ranges / resolution / accuracy):
frequency: 10 Hz to 10 MHz / 0.01 Hz to 0.01 MHz / ± (0.1% +4)
load: 0.1 to 99.9% / 0.1% / ±5)
Note/+5. Sensitivity:
≤100kHz: 200mVrms ≤ input amplitude ≤ 30V RMS
> 100kHz ~ 1MHz: 600mV RMS ≤ input amplitude ≤ 30V RMS
> 1 MHz input amplitude: 1 MHz ~ 1 MHz ≤ 30 V RMS
- Note 2) The duty cycle (duty ratio) measurement is applicable only for square waves ≤10kHz, amplitude: 1V p-p
Frequency ≤ 1kHz Duty cycle: 10.0% ~ 95.0% Operating frequency
Operating frequency
1 kHz 30.0% ~ 70.0%
- Overload protection at 600 Vrms
9. Checking circuit continuity:
- if the measured resistance is less than 10Ω, the continuity circuit signal emits a buzzer
- if the measured resistance is greater than 31Ω, the open-circuit signal does not emit a buzzer
- uncertainty in the range from 10Ω to 31Ω. 600Ω range
- Overload protection at 600 Vrms
10. Diode measurement:
- in the forward direction, the voltage drop across the semiconductor junction is less than or equal to 2V
- for a silicon junction, a typical voltage drop is 0.5 to 0.8V
- open-circuit voltage of approximately 4.0V
- measurement in the range of 6.000V
Non-contact electric field sensing (NCV):
- enables the detection of live wires in two sensitivity modes – EFLo and EFHi – for low-voltage distribution at 110V/50/60Hz and 230V/50/60Hz
Other parameters:
- measurement of maximum and minimum values
- relative measurement of maximum and minimum. Mode (ratio) for voltage and capacitance measurement: yes
- HOLD: yes
- low battery indicator: yes
- auto-off: yes
- Power supply: 1.5 V batteries (R03): 2 pcs
- Backlit display size: 37 mm x 25 mm
- Product dimensions: 631.5 mm x 631 mm
- net product weight: 235 g
- Product colour: red and grey
Package contents:
- UT204R clamp multimeter: 1 pc
- Test leads: 1 pair
- K-type thermocouple up to 101 V: 0 pcs
(R03): 2 pcs
- user manual: 1 pc
Wholesale packaging:
- standard quantity per box: 40 pcs
- standard box dimensions: 485 mm x 295 mm x 385 mm
- standard gross weight per box: 16/F: 7 kg
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT203R Clamp Multimeter
This product comes with a 3-year warranty. The UT203R digital clamp meter is used to measure AC and DC voltages up to 600V, AC and DC currents up to 400A, and frequencies from 10Hz to 60kHz up to 1600V for low voltage. 10MHz for low voltage. It features protection against voltages exceeding 600V across all ranges, as well as an audible and visual alarm. Four-digit multi-segment display measuring 37 x 25 mm with backlighting and fast refresh rate (3 times/s). The jaw opening allows measurement on cables with a diameter of up to 28 mm. The non-contact electric field sensor (NCV) enables the detection of live conductors in two sensitivity modes – EFLo and EFHi – for low-voltage distribution at 110V/50/60Hz and 230V/50/60Hz. Probe supplied – the tip cap on the test leads allows measurement of LV distribution in CAT III without the risk of arcing. Without the tip caps, the test leads can only be used for measurements on low-voltage distribution lines in CAT II. Power supply: 2 x 1.5V R03 batteries. The meter’s power consumption is approx. 1.8 mA. The circuit has an automatic power-saving function. Standby current consumption is <11μA, which effectively extends battery life to approximately 400 hours.
Product parameters:
- measurement of voltage, current and frequency of high voltage up to 600 V
- measurement of frequencies from 10 Hz to 10 MHz
- Measurement capabilities
-400V
- 40 mF
- measurement of the (relative) ratio of voltages and capacitances
- multi-segment display and audible/visual alarm
- protection against voltages exceeding 600V in intervals
- non-contact detection of live conductors
- automatic range switching
- measurement accuracy of current and voltage is guaranteed to within 1% across 10% of ranges
Technical parameters:
1. AC measurement (ranges / resolution / accuracy):
40.00A / 0.010A / 50Hz ~ 100Hz ± (2.0% +5)
400.0A / 0.100A / 50Hz ~ 100Hz ± (2.0% + 5) current monitoring accuracy ± 5) the range from 50 to 100 Hz is ± (1.0% + 5) at a resolution of 0.1 Hz
- overload protection at 620 A
2. DC current measurement (ranges / resolution / accuracy):
40.00A / 0.010A / ± (2.0% +5)
400.0 A / 0.100 A / ± (2.0% + 5)
- overload protection at 620 A
>
>
4.000V / 0.001V / 10Hz ~ 10kHz ± (1.0% +5)
40.00V / 0.010V / 10Hz ~ 10kHz ± (0.8% / 0.8% +5) / 10Hz ~ 10kHz ± (0.8% +5)
600.0V / 1V / 10Hz ~ 10kHz ± (0.8% +5)
- frequency monitoring accuracy when measuring AC voltage in the range from 10Hz to 60kHz at a resolution of ±0.01 kHz
- Overload protection at 600 Vrms
- Input impedance approx. 10 MΩ
4. DC voltage measurement (range / resolution / accuracy):
400.0 mV / 0.100 mV / ± (0.7% +3)
4.000 V / 0.001 V / ± (0.5% +2)
40.00 V / 0.010 V / 0.010 V / 0.010 V / 0.010 V / ±0.001 V / ± (0.5% +2) / 0.100 V / ± (0.5% +2)
600.0V / 1V / ± (0.5% +2)
- input impedance approx. 10MΩ
- Overload protection at 600 Vrms
5. Resistance measurement (ranges / resolution / accuracy):
400.0Ω / 0.1Ω / ± (1.0% +2)
4,000 kΩ / 0.001 kΩ / ± (0.8% +2)
40.00kΩ / 0.01kΩ / 0.01kΩ / ±2.0% 0.8kΩ / ±2.0kΩ / 0.1kΩ / ± (0.8% +2)
4.000 MΩ / 0.001 MΩ / ± (2.5% +5)
40.00 MΩ / 0.01 MΩ / ± (2.5% +5)
- overload protection at 600 Vrms open circuit
- approx. 1V
6. Capacitance measurement (range / resolution / accuracy):
40.00 nF / 0.01 nF / ± (4.0% +5)
400.0 nF / 0.1 nF / ± (4.0% +5)
4.000 μF / 0.001 μF / ± (4.0% +5)
40.00 μF / 0.01 μF / ± (4.0% +5)
400.0 μF / 0.1 μF / ± (4.0% +5)
4,000 μF / 0.001 μF / ± 10.0%
- overload protection at 600 Vrms
7. Frequency and load measurement (ranges / resolution / accuracy):
frequency: 10 Hz to 10 MHz / 0.01 Hz to 0.01 MHz / ± (0.1% + 4)
Duty cycle: 0.1 to 99.9% / 0.1% / ± (5)
Note/+5. Sensitivity:
≤100kHz: 200mVrms ≤ input amplitude ≤ 30V RMS
> 100kHz ~ 1MHz: 600mV RMS ≤ input amplitude ≤ 30V RMS
> 1 MHz input amplitude: 1 MHz ~ 1 MHz ≤ 30 V RMS
- Note 2) The duty cycle (duty ratio) measurement is applicable only for square waves ≤10kHz, amplitude: 1V p-p
Frequency ≤ 1kHz Duty cycle: 10.0% ~ 95.0% Operating frequency
Operating frequency
1 kHz 30.0% ~ 70.0%
- overload protection at 600 Vrms
8. Checking circuit continuity:
- if the measured resistance is less than 10Ω, the continuity circuit signal emits a buzzer
- if the measured resistance is greater than 31Ω, the open circuit signal does not emit a buzzer
- uncertainty in the range from 10Ω to 31Ω. 600Ω range
- Overload protection at 600 Vrms
9. Diode measurement:
- in the forward direction, the voltage drop across the semiconductor junction is less than or equal to 2V
- for a silicon junction, a typical voltage drop is 0.5 to 0.8V
- open-circuit voltage of approximately 4.0V
- measurement in the range of 6.000V
Non-contact voltage detection (NCV):
- enables the detection of live wires in two sensitivity modes – EFLo and EFHi – for low-voltage distribution at 110V/50/60Hz and 230V/50/60Hz
Other parameters:
- Measurement of maximum and minimum values (ratio) for voltage and capacitance: yes
- HOLD: yes
- low battery indicator: yes
- Auto-off: yes
- Power supply: 1.5 V batteries (R03): 2 pcs
- Backlit display size: 37 mm x 25 mm
- Product dimensions: 63 mm
- x 63 mm
- net product weight: 235 g
- product colour: red and grey
Package contents:
- UT204R clamp multimeter: 1 pc
- test leads: 1 pair
- 1.5 V battery (R03): 2 pcs user manual
- 1 pc
Wholesale packaging:
- standard quantity per box: 40 pcs
- standard box dimensions: 485 mm x 295 mm x 385 mm
- standard gross weight of box: 16.1 kg
MANUFACTURED BY UNIVERSITATEA www.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT202T is an easy-to-use smart clamp multimeter that can automatically detect the most common parameters – AC/DC voltage, AC current, resistance and continuity. It displays true RMS values.
Capacitance measurement and non-contact voltage measurement (NCV) are selected by pressing buttons. The UT202T features a new design, high reliability and safety, as well as automatic range switching available for all functions. Dual backlit LCD screen, with a maximum display value of ±9999, can simultaneously display voltage/current, voltage/frequency, current/frequency. There is an LED lamp on the underside of the test leads. It is powered by two 1.5V AAA R03 batteries.
The multimeter is designed in accordance with safety standards EN61010-1/61010-2-032 and electromagnetic compatibility standards EN61326-1/EN61326-2-2, and complies with CAT III 600V, double insulation and pollution degree. :
- measurement of AC/DC voltage, AC current, resistance, capacitance and circuit continuity
- measurement of voltage and current frequency on the auxiliary display
- Non-contact voltage detection (NCV)
- dual LCD display with multi-segment backlight
- Audible and visual alarm
- protection against voltage ranges exceeding 60 V
- switching
- accuracy guaranteed between 5% and 100% of the range
- built-in LED torch
- powered by two 1.5V AAA R03 batteries
Technical specifications:
To ensure measurement accuracy, the operating temperature must be within the range of 18°C to 28°C
1. AC current measurement (ranges/resolution/accuracy):
9.999A / 0.001A / 50Hz to 60Hz ±(2.5%+30)
99.99A / 0.01A / 50Hz to 60Hz ±(2.5% /+60)
- minimum detectable current: 0.01A
- frequency display during AC current measurement is standard if the current amplitude is ≥1Arms at a frequency of 40Hz to 100Hz
- overload protection
/>
/200 Hz
AC voltage measurement (range / resolution / accuracy):
9.999 V / 0.001 V / 40 Hz to 400 Hz ±(0.8%+3)
99.99 V / 0.010 V / 40 Hz to 400 Hz ±(0.8% + 3)
99.99 V / 0.010 V / 40 Hz to 400 Hz ±(0.8%/+3) 40 Hz to 400 Hz ±(0.8%+3)
- Frequency display on the auxiliary display during AC voltage measurement is standard if the input voltage has an amplitude ≥5Vrms at a frequency from 40Hz to 1000Hz. At frequencies above 400 Hz, accuracy is not specified.
- Input impedance approx. 10 MΩ
- Overload protection at 600 Vrms
- Minimum detectable voltage 0.6 V
3. DC voltage measurement (range / resolution / accuracy):
9.999 V / 0.001 V / ±(0.5%+3)
99.99 V / 0.01 V / ±(0.5% + 3)
600 V / 0.1 V / ±(0.5% + 3) input
approx. 10 MΩ
- overload protection at 600Vrms
- minimum detectable voltage 0.6V
4. Resistance measurement (ranges/resolution/accuracy):
999.9Ω / 0.1Ω / ±(0.8%+3)
9.999 kΩ / 0.001 kΩ / ±(0.8% + 3)
99.99 kΩ / 0.01 kΩ / 0.01 kΩ / %+90 kΩ / %+90 kΩ / >±9 kΩ / 0.1 kΩ / ±(0.8%+3)
6,000 MΩ / 0.001 MΩ / ±(1.5%+3)
- overload protection at 600 Vrms
- open-circuit voltage approx. 1 V
5. Capacitance measurement (ranges/resolution/accuracy):
99.99 nF / 0.01 nF / ±(4.0%+10)
999.9 nF / 0.1 nF / ±(4.0%+10)
9.999 nF / 0.001 μF / 0.001 μF ±(4.0%+5)
99.99 μF / 0.01 μF / ±(4.0% + 5)
999.9 μF / 0.1 μF / ±(4.0% + 5)
9.999 mF / 0.001 mF / ±(10.001 mF / ±/+10.001 mF / ±/+10.09%/+5) 0.1 mF / ±(10.0%+10)
- overload protection at 600 Vrms
6. Checking circuit continuity:
- If the measured resistance is ≤30Ω, the circuit is in good working order, the buzzer will beep and the LED will turn green. If the measured resistance is ≥70Ω (open circuit), the buzzer will not sound and the LED will turn red. If the circuit resistance is between 30Ω and 70Ω, the condition is undefined.
- open-circuit voltage approximately 3.0 V
- Overload protection at 600 Vrms
7. Non-contact electric field sensing (NCV):
- enables acoustic detection of live conductors using a buzzer and visual detection using an LED
Other parameters:
- jaw opening: 28 mm
- measurement of maximum and minimum values: yes
-: data hold indication
- low battery
- yes, if the battery voltage is less than 2.4V; if the battery voltage is less than approx. 2.2V, the device cannot be switched on
- auto-off: yes, the multimeter will switch off automatically if no button is pressed within 15 minutes. This feature can be disabled as required.
- Drop resistance: yes, 1 m
- Electromagnetic compatibility: RF ≤ 1 V/m, overall accuracy = stated accuracy ±5% of the range; if RF > 1 V/m, accuracy is not specified
- Operating altitude: ≤2000m, operating temperature and humidity: +3/0°C
-0°C (≤ 80%RH), 30 to 40°C (≤ 75%RH), 40 to 50°C (≤ 45%RH)
- storage temperature and humidity: -20 to +60°C (≤ 80%RH)
- recommended calibration interval: 1 year
- 1-battery power supply: 5 V–2 V (R03)
- Product dimensions: 201.5 × 47 × 28.5 mm
- UT202T weight: approx. 241g (including batteries);
- Product colour: red and grey
Package contents:
- UT202T multimeter clip: 1 pc
- test leads: 1 pair
- 1.5 V battery (R03): 2 pcs
- user manual
- pcs
Wholesale packaging:
- standard quantity per box: 40 pcs
- standard carton dimensions: 485 x 295 x 385 mm
- standard gross weight of carton: approx. 17 kg
Manufacturer:
UNI-TREND
-
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT202R Digital Clamp Meter
This product comes with a 3-year warranty. The UT202R digital clamp meter is used to measure AC and DC voltages up to 600V, AC currents up to 400A and voltage frequencies up to 600V. It features protection against voltages exceeding 600V across all ranges, as well as an audible and visual alarm. Four-digit multi-segment display measuring 37 x 25 mm with backlighting and a fast refresh rate (3 times/s). The jaw opening allows measurement on cables with a diameter of up to 28 mm. The non-contact electric field sensor (NCV) enables the detection of live conductors at two sensitivity levels – EFLo and EFHi – for low-voltage distribution at 110V / 50 / 60Hz and 230V / 50 / 60Hz. Probe supplied – the tip cap on the test leads allows measurement of LV distribution in CAT III without the risk of arcing. Without the tip caps, the test leads can only be used for measurements on low-voltage distribution lines in CAT II. Power supply: 2 x 1.5V R03 batteries. The meter’s power consumption is approx. 1.8 mA. The circuit has an automatic power-saving function. Standby current is <11μA, which effectively extends battery life to approximately 400 hours.
Product parameters:
- measurement of voltage, current and frequency of high voltage up to 600 V
- non-contact electric field detection (NCV)
- Temperature measurement from -1/>-°C to -100°C, multi-segment display and audible/visual alarm
- protection against voltages exceeding 600 V in intervals
- automatic range switching
- accuracy guaranteed within the range of 1% to 100% of the range
Technical parameters:
1. AC current measurement (ranges / resolution / accuracy):
4,000 A / 0.001 A / 50 Hz ~ 100 Hz ± (4.0% + 10)
40.00A / 0.010A / 50Hz ~ 100Hz ± 2.0%/100Hz ± (4.0% +10) 0.100 A / 50 Hz ~ 100 Hz ± (2.0% +10)
- the frequency monitoring accuracy when measuring AC current in the range of 50 to 100 Hz is ± (1.0% + 5) at a resolution of 0.1 Hz
- overload protection at 420 A
>
AC voltage measurement (range / resolution / accuracy):
4,000 V / 0.001 V / 10 Hz to 10 kHz ± (1.0% + 5)
40.00 V / 0.010 V / 10 Hz ~ 10 kHz ± (0.8% / 0.8% +5) / 10 Hz ~ 10 kHz ± (0.8% +5)
600.0V / 1,000V / 10Hz ~ 10kHz ± (0.8% +5)
- frequency monitoring accuracy when measuring AC voltage in the range from 10 Hz to ± 10 kHz at a resolution of + (10 kHz). 0.01 Hz to 0.01 kHz
- Overload protection at 600 Vrms
- Input impedance approx. 10 MΩ
3. DC voltage measurement (range / resolution / accuracy):
400.0 mV / 0.100 mV / ± (0.7% +3)
4.000 V / 0.001 V / ± (0.5% +2)
40.00 V / 0.010 V / 0.010 V / 0.010 V / ± (0.7% +3) 0.100 V / ± (0.7% +3)
600 V / 1,000 V / ± (0.7% +3)
- input impedance approx. 10MΩ
- overload protection at 600 Vrms
4. Resistance measurement (ranges / resolution / accuracy):
400.0Ω / 0.1Ω / ± (1.0% +2)
4,000 kΩ / 0.001 kΩ / ± (0.8% +2)
40.00 kΩ / 0.01 kΩ / 0.01 kΩ / ±40.8 kΩ / ±2.0 kΩ / 0.1 kΩ / ± (0.8% +2)
4,000 MΩ / 0.001 MΩ / ± (2.0% +5)
40.00 MΩ / 0.01 MΩ / ± (2.0% +5)
- overload protection at 600 Vrms
>
Capacitance measurement (ranges / resolution / accuracy):
4,000 nF / 0.001 nF / ± (4.0% +10)
40.00 nF / 0.01 nF / ± (4.0% +10)
400.0 nF / ±4 nF / ±4 nF / ±4 nF (0.01 nF / ± (4.0% +10) +10)
4,000 μF / 0.001 μF / ± (4.0% +5)
40.00 μF / 0.01 μF / ± (4.0% +5)
400.0 μF / 0.1 μF / ± (4.0% +5.0,01 μF / 0.01 μF / ± (4.0% +5)) 10.0%
- overload protection at 600 Vrms
6. Temperature measurement (ranges / resolution / accuracy):
-40°C to +40°C/1°C / ±4°C
+40°C to +500°C/1°C/ ±(1.5% +5)
+500°C to +1000°C/±(2°C/1°C/±(1.5% +5) +5)
-40°F to +104°F/1°F/± 6°F
+104°F to +932°F/1°F/ ± (2.0 +6)
+932°F to +1832°F/1°F/ ± (2.5% +4/7)
Circuit continuity check:
- if the measured resistance is less than 10Ω, the continuity circuit signal emits a buzzer
- if the measured resistance is greater than 31 ohms, the open circuit signal does not emit a buzzer
- open-circuit voltage approximately 2.0V
- measurement in the overload protection range
06 overload
-0Ω Vrms
8. Diode measurement:
- in the forward direction, the voltage drop across the semiconductor junction is less than or equal to 2V
- for a silicon junction, a typical voltage drop is 0.5 to 0.8V
- open-circuit voltage of approximately 2.2V
- measurement in the 4.900 V range
/>
Non-contact electric field sensor (NCV):
- enables the detection of live wires in two sensitivity modes – EFLo and EFHi – for low-voltage distribution at 110V / 50 / 60Hz and 230V / 50 / 60Hz
Other parameters:
Measurement value:
HOLD: Yes
- low battery indication: Yes
- Auto-off: Yes
- Power supply: 1.5 V batteries (R03): 2 pcs
- Backlit display size: 37 mm x 25 mm
- Product dimensions: 215 mm x 63 mm x 36 mm
- Net product weight:
- 24 g Product colour:24-8 g grey
Package contents:
- UT202R clamp multimeter: 1 pc Box: 40 pcs
- Standard box dimensions: 485 mm x 295 mm x 385 mm
- standard gross weight of box: 17.1 kg
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT202BT is an easy-to-use smart clamp multimeter with Bluetooth, which can automatically detect the most common parameters – AC/DC voltage, AC current, resistance and continuity. It displays true RMS values.
Capacitance measurement and non-contact voltage detection (NCV) are selected by pressing buttons. The UT202BT features a new design, high reliability and safety, as well as automatic range switching available for all functions. The dual backlit LCD display, with a maximum display value of ±9999, can simultaneously display voltage/current, voltage/frequency, and current/frequency.
There is an LED light on the underside of the test leads. It is powered by two 1.5V R03 AAA batteries.
The multimeter is designed in accordance with safety standards EN61010-1/61010-2-032 and electromagnetic compatibility standards EN61326-1/EN61326-2-2, and complies with CAT III 600V, double insulation and pollution degree.
Parameters:
- measurement of AC/DC voltage, AC current, resistance, capacitance, temperature and circuit continuity
- Measurement of voltage and current frequency on the auxiliary display
- Non-contact electric field sensor (NCV)
- Dual LCD display with multi-segment backlight
- Increased acoustic and visual protection against voltages of 60V and above
- Automatic range switching
- Accuracy guaranteed within the range of 5% to 100% of the ranges
- Built-in LED torch
- Powered by two 1.5V AAA R03 batteries
Technical parameters:
To ensure measurement accuracy, operating temperature range: -18°C to 28°C
1a. AC current measurement (ranges/resolution/accuracy):
9.999A / 0.001A / 50Hz to 60Hz ±(2.5%+30)
99.99A / 0.01A / 50Hz to 60Hz ±(2.5% /+60)
- minimum detectable current: 0.01A
- frequency display during AC current measurement is standard if the current amplitude is ≥1Arms at a frequency of 40Hz to 100Hz
- Overload protection at 60 Hz/> AC current measurement - LPF (range / resolution / accuracy):
6000A / 0.1A / 50Hz to 60Hz ±(4.0%+5) / 600A rms
1c. AC trip current measurement (range / resolution / accuracy):
99.99A / 0.01A / 50Hz to 60Hz ±(10%+10) / 600A rms
6000A / 0.1A / 50Hz ±0% / 60Hz ±60Hz rms
2a. AC voltage measurement (range / resolution / accuracy):
9.999V / 0.001V / 40Hz to 400Hz ±(0.8%+3)
99.99V / 0.010V / 40Hz to 400Hz ±(0.8%+3)
99.99 V / 0.010 V / 40 Hz to 400 Hz ±(0.8%/+3) 40 Hz to 400 Hz ±(0.8%+3)
- The frequency display on the auxiliary display during AC voltage measurement is standard if the input voltage has an amplitude of ≥5Vrms at a frequency of 40Hz to 1000Hz. At frequencies above 400 Hz, accuracy is not specified.
- Input impedance approx. 10 MΩ
- Overload protection at 600Vrms
- Minimum detectable voltage 0.6V
2b. AC-LPF voltage measurement (range / resolution / accuracy):
600 V / 0.1 V / 40 Hz to 400 Hz ±(2.0%+5) / 600 V rms
3. DC voltage measurement (range / resolution / accuracy):
9.999 V / 0.001 V / ±(0.5%+3)
99.99V / 0.01V / ±(0.5%+3)
600V / 0.1V / ±(0.5%+3) input
approx. 10MΩ
- overload protection at 600Vrms
- minimum detectable voltage 0.6V
4. Resistance measurement (ranges/resolution/accuracy):
999.9Ω / 0.1Ω / ±(0.8%+3)
9.999 kΩ / 0.001 kΩ / ±(0.8% + 3)
99.99kΩ / 0.01kΩ / 0.01kΩ /%+90kΩ /%+90kΩ />±9kΩ / 0.1kΩ / ±(0.8%+3)
9.999 MΩ / 0.001 MΩ / ±(1.5%+3)
99.99 MΩ / 0.01 MΩ / ±(2.0%+5)
- overload protection at 600 Vrms open-circuit voltage approx.
- 1V
5. Capacitance measurement (ranges/resolution/accuracy):
99.99 nF / 0.01 nF / ±(4.0%+10)
999.9 nF / 0.1 nF / ±(4.0%+10)
9.999 nF / 0.001 μF / 0.001 μF ±(4.0%+5)
99.99 μF / 0.01 μF / ±(4.0% + 5)
999.9 μF / 0.1 μF / ±(4.0% + 5)
9.999 mF / 0.001 mF / ±(10.001 mF / ±/+10.001 mF / ±/+10.09%/+5) 0.1 mF / ±(10.0%+10)
- overload protection at 600 Vrms
6. Checking circuit continuity:
- If the measured resistance is ≤30Ω, the circuit is in good working order, the buzzer will beep and the LED will turn green. If the measured resistance is ≥70Ω (open circuit), the buzzer will not sound and the LED will turn red. If the circuit resistance is between 30Ω and 70Ω, the condition is undefined.
- open-circuit voltage approx. 3.0 V
- Overload protection at 600 Vrms
7. Temperature measurement:
-40°C~1000°C / ±(2.0%+5)
8. Non-contact electric field sensing (NCV):
- enables acoustic detection of live conductors using a buzzer and optical detection using an LED
Other parameters:
- jaw opening: 28mm
- measurement of maximum and minimum values: yes
- yes
- Yes, data hold, low battery indication (H/>>- and low data: battery voltage is less than 2.4 V; if the battery voltage is less than approx. 2.2 V, the device cannot be switched on
- auto-off: yes, the multimeter will switch off automatically if no button is pressed within 15 minutes. This feature can be disabled as required.
- Drop resistance: yes, 1 m
- Electromagnetic compatibility: RF ≤ 1 V/m, general accuracy = stated accuracy ±5% of the range; if RF > 1 V/m, accuracy is not specified
- Operating altitude: ≤ 2000m and operating humidity <3000m
-: (≤ 80%RH), 30 to 40°C (≤ 75%RH), 40 to 50°C (≤ 45%RH)
- storage temperature and humidity: -20 to +60°C (≤ 80%RH)
- recommended calibration interval: 1 year
- 1-battery power supply: 5 V–2 V (R03)
- product dimensions: 201.5 × 47 × 28.5 mm
- Weight: approx. 241 g (including batteries);
- product colour: red and grey
Package contents:
- UT202BT clamp multimeter: 1 pc
- test leads: 1 pair
- temperature probe (K): 1 pc
- 2 x R03 instruction manuals
- User manual: 1 copy
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT202F Clamp Meter
This product comes with a 3-year warranty. The UT202F digital clamp meter is used to measure AC and DC voltages up to 600V, AC currents up to 600A and voltage frequencies up to 600V. It features protection against voltages exceeding 600V across all ranges, as well as an audible and visual alarm. Four-digit multi-segment display measuring 37 x 25 mm with backlighting and a fast refresh rate (3 times/s). The jaw opening allows measurement on cables with a diameter of up to 28 mm. The non-contact electric field sensor (NCV) enables the detection of live conductors at two sensitivity levels – EFLo and EFHi – for low-voltage distribution at 110V/50/60Hz and 230V/50/60Hz. Probe supplied – the tip cap on the test leads allows measurement of LV distribution in CAT III without the risk of arcing. Without the tip caps, the test leads can only be used for measurements on low-voltage distribution lines in CAT II. Power supply: 2 x 1.5V R03 batteries. The meter’s power consumption is approx. 1.8 mA. The circuit has an automatic power-saving function. Standby current is <11μA, which effectively extends battery life to approximately 400 hours.
Product parameters:
- measurement of voltage, current and high-voltage frequency up to 600 V
- non-contact electric field detection (NCV)
- Frequency measurement from 10 MHz to 600 V
60mF
- Measurement of the (relative) ratio of voltages and capacitances
- multi-segment display and audible/visual alarm
- protection against voltages exceeding 600V in ranges
- automatic range switching
- accuracy of current and voltage measurements guaranteed within 1% of the technical
parameters:
1. AC current measurement (ranges / resolution / accuracy):
6,000A / 0.001A / 50Hz ~ 100Hz ± (4.0% + 10)
60.00A / 0.010A / 50Hz ~ 100Hz ± 10.0%
(2.0) 0.100A / 50Hz ~ 100Hz ± (2.0% + 10)
- the frequency monitoring accuracy when measuring AC current in the range from 50 to 100 Hz is ± (1.0% + 5) at a resolution of 0.1 Hz
- overload protection at 620A.>
AC voltage measurement (range / resolution / accuracy):
6,000 V / 0.001 V / 10 Hz ~ 10 kHz ± (1.0% + 5)
60.00 V / 0.010 V / 10 Hz ~ 10 kHz ± 0.8% / 50.8% / 0.100 V / 10 Hz ~ 10 kHz ± (0.8% + 5)
- frequency monitoring accuracy when measuring AC voltage in the range 10 to 10k ± (1.0% + 5) at a resolution of 0.01Hz to 0.01kHz overload protection at the input
-0.01kHz overload
-0. approx. 10 MΩ
3. DC voltage measurement (range / resolution / accuracy):
600.0 mV / 0.100 mV / ± (0.7% + 3)
6,000 V / 0.001 V / ± (0.5% + 2)
60.00 V / 0.010 V / ±0.7% 3)
600.0 V / 0.100 V / ± (0.7% + 3)
- input impedance approx. 10 MΩ
- overload protection at 600 Vrms
4. Resistance measurement (range / resolution / accuracy):
600.0Ω / 0.1Ω / ± (1.0% + 2)
6,000 kΩ / 0.001 kΩ / ± (0.8% + 2)
60.00 kΩ / 0.01 kΩ / ± (0.01 kΩ / ± (0.01 kΩ) 2)
600.0 kΩ / 0.1 kΩ / ± (0.8% + 2)
6,000 MΩ / 0.001 MΩ / ± (2.0% + 5)
60.00 MΩ / 0.01 MΩ / ± (2.0% + 5) overload protection at 6.0% + 5)
-50 Vrms
5. Capacitance measurement (ranges / resolution / accuracy):
6,000 nF / 0.001 nF / ± (4.0% + 10)
60.00 nF / 0.01 nF / ± (4.0% + 10)
600.0 nF / 0.00% + 1.10)
6,000 μF / 0.001 μF / ± (4.0% + 5)
60.00 μF / 0.01 μF / ± (4.0% + 5)
600.0μF / 0.1μF / ± (4.0% + 5)
600.0μF / 0.1μF / ± (4.0% + 5). ± 10.0%
60.00 mF / 0.01 mF / ± 10.0%
- overload protection at 600 Vrms
6. Frequency and load measurement (ranges / resolution / accuracy):
frequency: 10 Hz to 10 MHz / 0.01 Hz to 0.01 MHz / ± (0.1% + 4)
Duty cycle: 0.1 to 99.9% / 0.1% / ± 5.0% / ± 5.0% Measurement sensitivity:
≤100kHz: 200mVrms ≤ input amplitude ≤ 30V RMS
> 100kHz ~ 1MHz: 600mV RMS ≤ input amplitude ≤ 30V RMS
>1 V RMS input
> 1 V RMS: amplitude ≤ 30 V RMS
- Note 2) Duty cycle (duty ratio) measurement is applicable only for square waves ≤10kHz, amplitude: 1V p-p
Frequency ≤ 1kHz Duty cycle: 10.0% ~ 95% Duty cycle: 30.0% ~ 70.0%
- Overload protection at 600 V rms
7. Circuit continuity check:
- if the measured resistance is less than 10Ω, the continuity circuit signal triggers a buzzer
- if the measured resistance is greater than 31 ohms, the open-circuit signal does not emit a buzzer
- open-circuit voltage approximately 2.0V
- measurement in the overload protection range
60-0Ω during overload
Vrms
8. Diode measurement:
- in the forward direction, the voltage drop across the semiconductor junction is less than or equal to 2V
- for a silicon junction, a typical voltage drop is 0.5 to 0.8V
- open-circuit voltage of approximately 3.9V
- measurement range of 6.000V
Parameters:
- measurement of maximum and minimum values: yes
- Relative mode (ratio) measurement for voltage and capacitance: yes
- HOLD: yes
- low battery indicator: yes
- auto-off: yes
- 1.5 V battery power supply (backlit display size: 3 x 3): 25 mm
- Product dimensions: 215 mm x 63 mm x 36 mm
- net product weight: 248 g
- Product colour: red and grey
Package contents:
- UT201R clamp multimeter: 1 pc. test leads
/>- 1 pc. (R03): 2 pcs
- user manual: 1 pc
Wholesale packaging:
- standard quantity per box: 40 pcs
- standard box dimensions: 485 mm x 295 mm x 385 mm
- standard gross weight per box: 16/F: 7 kg
https://www.uni-trend
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT201R Clamp Meter
This product comes with a 3-year warranty. The UT201R digital clamp meter is used to measure AC and DC voltages up to 600V, AC currents up to 400A and voltage frequencies up to 600V. It features protection against voltages exceeding 600V across all ranges, as well as an audible and visual alarm. Four-digit multi-segment display measuring 37 x 25 mm with backlighting and a fast refresh rate (3 times/s). The jaw opening allows measurement on cables with a diameter of up to 28 mm. The non-contact electric field sensor (NCV) enables the detection of live conductors at two sensitivity levels – EFLo and EFHi – for low-voltage distribution at 110V / 50 / 60Hz and 230V / 50 / 60Hz. Probe supplied – the tip cap on the test leads allows measurement of LV distribution in CAT III without the risk of arcing. Without the tip caps, the test leads can only be used for measurements on low-voltage distribution lines in CAT II. Power supply: 2 x 1.5V R03 batteries. The meter’s power consumption is approx. 1.8 mA. The circuit has an automatic power-saving function. Standby current consumption is <11μA, which effectively extends battery life to approximately 400 hours.
Product parameters:
- measurement of voltage, current and frequency of high voltage up to 600 V
- non-contact electric field detection (NCV)
- Alarm display and visual protection greater than the audible signal/e.g. 600 V in intervals
- automatic range switching
- accuracy guaranteed within the range of 1% to 100% of the range
Technical parameters:
1. AC current measurement (ranges / resolution / accuracy):
4,000 A / 0.001 A / 50 Hz ~ 100 Hz ± (4.0% + 10)
40.00A / 0.010A / 50Hz ~ 100Hz ± 100.0%
(2.0) 0.100A / 50Hz ~ 100Hz ± (2.0% + 10)
- the frequency monitoring accuracy when measuring AC current in the range from 50 to 100 Hz is ± (1.0% + 5) at a resolution of 0.1 Hz
- Overload protection at 420A.>
AC voltage measurement (range / resolution / accuracy):
4,000 V / 0.001 V / 10 Hz ~ 10 kHz ± (1.0% + 5)
40.00 V / 0.010 V / 10 Hz ~ 10 kHz ± 0.8% / 50.8% 0.100 V / 10 Hz ~ 10 kHz ± (0.8% + 5)
600.0V / 1.000V / 10Hz ~ 10kHz ± (0.8% + 5)
- frequency monitoring accuracy when measuring AC voltage within the resolution range from 1.0% ± 5 at 1.0kHz to 0.01 Hz up to 0.01 kHz
- Overload protection at 600 Vrms
- Input impedance approx. 10 MΩ
3. DC voltage measurement (range / resolution / accuracy):
400.0 mV / 0.100 mV / ± (0.7% + 3)
4.000 V / 0.001 V / ± (0.5% + 2)
40.00 V / 0.00 V / ±0.3)
400.0V / 0.100V / ± (0.7% + 3)
600 V / 1.000 V / ± (0.7% + 3)
- input impedance approx. 10MΩ
- overload protection at 600 Vrms
4. Resistance measurement (range / resolution / accuracy):
400.0Ω / 0.1Ω / ± (1.0% + 2)
4,000 kΩ / 0.001 kΩ / ± (0.8% + 2)
40.00 kΩ / 0.01 kΩ / ± (0.01 kΩ / ± (0.01 kΩ) 2)
400.0 kΩ / 0.1 kΩ / ± (0.8% + 2)
4,000 MΩ / 0.001 MΩ / ± (2.0% + 5)
40.00MΩ / 0.01MΩ / ± (2.0% + 5) overload protection at 6.0% + 5)
-50 Vrms
5. Checking circuit continuity:
- if the measured resistance is less than 10Ω, the continuity circuit signal emits a buzzer
- if the measured resistance is greater than 31 ohms, the open-circuit signal does not emit a buzzer
- open-circuit voltage approximately 2.0V
- measurement in the overload protection range
06 overload
-0Ω Vrms
6. Diode measurement:
- in the forward direction, the voltage drop across the semiconductor junction is less than or equal to 2.0V
- for a silicon junction, a typical voltage drop is 0.5 to 0.8V
- open-circuit voltage of approximately 2.2V
- within the 4,000 V measurement range
7. Non-contact electric field sensing (NCV):
- enables the detection of live conductors in two sensitivity modes – EFLo and EFHi – for low-voltage distribution at 110V/50/60Hz and 230V/50/60Hz.
Other parameters:
- maximum and minimum measurement value HOLD
- year
- low battery indicator: yes
- auto-off: yes
- 1.5 V battery power supply (R03): 2 pcs
- backlit display size: 37 mm x 25 mm
- product dimensions: 215 mm x 63 mm x 36 mm
- net product weight: 2/4 g
- grey
Package contents:
- UT201R clamp multimeter: 1 pc 40 pcs
- Standard box dimensions: 485 mm x 295 mm x 385 mm
- standard gross weight of box: 16.6 kg
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT197 industrial digital multimeter is a high-precision, portable digital multimeter with true RMS and a 600,000-count display. It is IP67-rated, can withstand drops from 5m and operates at temperatures from -40°C to 55°C, making it suitable for harsh outdoor conditions. The built-in anti-interference frequency converter trigger mode filters out carrier frequency interference and distorted voltage for stable inverter measurement. The 1000 A AC/DC current measurement (UT-CS07) with Bluetooth technology allows you to record results via the UNI-T SmartTest app, and generate graphs and tables. It is certified to CAT IV 1000V safety standard (CE, cETLus) and is widely used in the power industry, equipment maintenance, petrochemicals, engineering, HVAC, new energy, factory and laboratory applications. V
- AC/DC current: 10 A
- number of displays: 600,000 and switchable; 9,999 (Hz)
- 12 kV surge protection and EMC protection
- IP67 protection and 5 m drop protection
- Voltage category: CAT IV 1000 V
- Operating environment: -40 °C to 55 °C
- Visual alarm at input terminals
-/- Automatic backlight function
-/>
Parameters:
Measurement: Range / Accuracy
AC current (A): 600.00 μA / 6000.0 μA / 60.000 mA / 600.00 mA / 6.0000 A / 10.000 A ± DC current (0.5% + 0) (0.5% + μA / 0.000 mA) 6000.0 µA / 60,000 mA / 600.00 mA / 6.0000 A / 10.000 A ±(0.1% + 20)
AC+DC current (A): 600.0 μA / 6000 μA / 60.00 mA / 60.00 mA / 60.00 mA / 60.00 mA ±(1.0%+5)
AC voltage (V): 600.00 mV / 6.0000 V / 60.000 V / 600.00 V / 1000.0 V ±(0.3%+20)
DC voltage (60,000 counts): 60.000.000 V / 60.000 V / 600.00 V / 1000.0 V ±(0.03%+5)
DC voltage (600,000 counts): 600.00 mV / 6.00000 V / 60.0000 V / 600.000 V / 000 V ±(0.015%+10)
Automatic AC/DC voltage measurement: 600.0 V ± (0.8% + 5)
Voltage range (ACV+DCV): 600.0 mV / 6.000 V / 60.00 V / 60.00 V / ±10.00 V 5)
External current (DC) (optional: UT-CS07): 100.0 A ((10 mV/A)/1000 A (1 V/A) ± (1.5% + 5)
External current (AC) (optional: UT-CS07): 100.0 A ((1.5% + 5)
External current (AC) (optional: UT-CS07): 100.0 A (()/10V/A (()/10V/A) (1.5% + 5)
Frequency measurement (Hz): 10 Hz to 1 MHz ±(0.002% + 5)
Resistance measurement (Ω): 600.00Ω / 6.0000kΩ / 60.000kΩ / 600.000kΩ / 600.00kΩ / 600.00kΩ / 0.0000Ω ±(0.07%+2)
Capacitance measurement (F): 60.00 nF / 600.0 nF / 6.000 μF / 60.00 μF / 600.0 μF / 6.000 mF / 60.00 mF ±(0.8%/°C+3):
Temperature measurement (°C ±3) 1000°C
Temperature measurement (°F): -40°F to 1832°F
Duty cycle (%): 10 Hz to 10 kHz (10% to 90%) ±(1.25%+5)
Functions:
Actual display value:
-> Display range: 600000 (DCV); 9999 (frequency)
- Diode test: 3.0 V
- Non-contact measurement
- Electrical circuit continuity test (buzzer)
- Data hold (manual/Auto)
- Peak value hold
- Maximum/minimum voltage mode
Indicator alarm
- Probe misconnection alarm
- Overrange indicator
- Automatic switch-off when not in use: after 15 minutes
- Automatic backlight
- Bluetooth function
- IP67 protection
- 5 m drop test
- Power supply: 1.5V AA (R06) batteries: Product -/>- Product dimensions: 2 pcs. 220 mm x 104 mm x 67 mm
- Product weight approx. 835 g (including batteries)
- Accessories: Measurement cable, temperature probe, clamps, batteries.
- Bulk pack: 5 pcs
Manufacturer: UNI-TREND.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT196 True RMS solar multimeter from UNI-T is a professional-grade product designed for professionals who install or maintain photovoltaic or wind power plants. The device’s design allows it to operate in harsh outdoor environments – it has IP65 protection and can withstand a drop from a height of 2 m. This multimeter measures DC voltage up to 1700 V and AC voltage (true RMS) up to 1500 V at a frequency range of 45 to 1000 Hz. With the optional UT-CS09D Flex current loop, it allows non-contact measurement of AC currents from 1.5 to 3000 A, even in confined spaces. In addition, the UT196 measures frequency, resistance, capacitance, semiconductor transitions and electrical circuit continuity.
The low-pass function allows you to filter out RF interference generated by the inverter. The low-impedance mode can help with troubleshooting sensitive circuits, as well as circuits that may contain stray voltages. A built-in torch, a bright backlight, and audible and visual alarms allow users to complete their work safely and efficiently, even in dark and noisy environments.
The UT196 solar digital multimeter is designed with overload protection of 1700V DC, 1500Vrms AC and tested for safe use in a CAT III 1000V, CAT IV, UK and CA600V, UK and CA 600Vrms certified environment. cETLus.
Product specifications:
- Multifunctional multimeter designed for use in both outdoor and indoor photovoltaic and wind power installations
- measurement of AC/DC voltage, resistance, capacitance, frequency, diodes, circuit continuity, with external current loop and AC current
- LCD display
-, backlit maximum value
-- display: ± 6000, values are updated 2 to 3 times per second
- analogue bar graph: yes, 31 segments, measurement rate of 30 times per second
- range switching: automatic / manual
- automatic AC/DC voltage detection: yes
- non-contact electromagnetic field measurement (NCV): yes
- diode testing (semiconductor junctions): yes, open-circuit voltage approx. 3V
- electrical circuit continuity test: yes, the circuit is considered closed when R ≤ 10Ω, then the buzzer emits a beep
- built-in low-pass filter (LPF): yes, when the LPF is activated, interfering voltages above 1.2 kHz are attenuated by ≥ -3 dB/0>Hz relative to the measured attenuationHz. yes
- Peak Hold: yes
- Data Hold: yes
- Max/Min mode: yes
- Power supply: 9V battery / 6F22,
- Low battery indication: yes, when voltage drops below <7.5V, - automatic switch-off during inactivity
-1
- minutes
- Built-in torch: yes
- audible and visual indicator: yes
Technical parameters:
DC voltage measurement (V): Range / Resolution / Accuracy
600.0 mV / 0.1 mV / ±(0.5%/1 V/5.0)
±(0.2%+5)
60.00 V / 0.01 V / ±(0.2% + 5)
600.0 V / 0.1 V / ±(0.2% + 5)
1700V / 1V / ±(0.2%+5)
The input range is approximately mV/DC. 1GΩ.
AC voltage measurement (V): Range / Resolution / Accuracy
600.0 mV / 0.1 mV / 45 Hz to 500 Hz: ± (0.8%+3); 500 Hz to 1 kHz: ± (1.8%+3)
6.000V / 0.001V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
60.00 V / 0.01 V / 45 Hz to 500 Hz: ± (0.8% + 3); 500 Hz to 1 kHz: ± (1.8% + 3)
600.0V / 0.1V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
1500 V / 1 V / 45 Hz to 500 Hz: ± (0.8% + 3); 500 Hz to 1 kHz: ± (1.8% + 3)
Input impedance in the mV/AC range is approx. 10MΩ.
Automatic AC/DC voltage measurement: automatic range / Resolution / Accuracy
0V to 600.0V / 0.1V / DC to 500Hz: ± (2.0%+3); 500 Hz to 1 kHz: ± (4.0%+3)
With automatic range selection, LPF, Peak Hold selection is not possible; the input impedance is 2 MΩ
Resistance measurement: range / resolution / accuracy
600.0Ω / 0.10Ω / ±20.10Ω / ±20.10Ω 1Ω / ± (0.8%+2)
60.00 kΩ / 10 Ω / ± (0.8% + 2)
600.0 kΩ / 100 Ω / ± (0.8% + 2)
6,000 MΩ / 1 kΩ / ± (1.2%/+6 Ω)<0br/>+3 Ω. (2.5%+5)
Capacitance measurement: Range / Resolution / Accuracy
60.00 nF / 0.01 nF / in REL mode: ± (3%+10)
600.0 nF / 0.1 nF / ± (1.9% > +5.00 μF / 0.00 μF / 0.00 μF / 5.00 μF) ± (1.9% + 5)
60.00 μF / 0.01 μF / ± (1.9% + 5)
600.0μF / 0.1μF / ± (1.9%+5)
6,000 mF / 0.001 mF / ± (5% > +5)
0.001 mF / 0.001 mF / ± (5% >+5) ± (5%+5)
Measurement of AC currents with a UT-CS09D Flex current loop: Range / Resolution / Accuracy
30.00A / 0.01A / ± (0.8%+8)
300.0A / 0.1A /+300.0A / 0.1A /+0. ± (0.8%+8)
Frequency measurement: Range / Resolution / Accuracy
60.00 Hz to 1,000 MHz / 0.1 Hz to 0.001 MHz / ± (0.08% +4)
Other operating parameters: -0.001 MHz 40°C (32°F – 104°F)
- Storage temperature: -10°C to 50°C (14°F to 122°F)
- relative humidity: ≤75% RH (0°C - 30°C), ≤50% RH (30°C) operating altitude -
≤2000m
- EMC immunity: in accordance with EN61326-1: 2013, EN61326-2-2: 2013
- Power supply: 9V battery / 6F22
- External dimensions: 195 x 95 x 58 mm
- Weight: 4–85 g
- Drop test: 2m
- Certification: CE, UKCA, cETLus (CAT III 1000V, CAT IV 600V)
- Complies with standards: EN61010-1, EN61010-2-033, EN/IEC 61010-031 :-Contents of individual packaging :-/>
UT196 Solar PRO multimeter: 1 pc
- test leads: 1 pair
- 9V/6F22 battery: 1 pc
- user manual: 1 pc
Manufacturer:
UNI-TREND
-
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT195E PRO Line Multimeter
This product comes with a 3-year warranty. UNI-T UT195E PRO Line Multimeter
Product specifications and features:
- maximum display range: 6000
- Display interface (HTN): single display
- Measurement digit conversion rate: 3 times per second
- Analogue bar conversion rate: 10 times/s
- analogue bar: 31 sections
- True RMS
- low-pass filter test: 3 H/H attenuation) diode/continuity test: 3.5 V
- Auto/manual range
- Auto power off
- continuity buzzer
- low battery indicator
- data hold
- MAX/MIN
- function selection
- torch
- automatic operating temperature
- °C - automatic operating temperature
-°C 2m drop resistance
- protection rating: IP65
Technical parameters:
- DC voltage: 600mV - 1000V ±(0.5%+3)
- AC voltage: 600 mV – 750 V ±(0.7%:>+3 V AC
+3) ±(2.0%+3)
- DC current (A): 600.0 μA – 20 A ±(0.8% + 3)
- AC current (A): 600.0 μA – 20 A ±(1.0% + 3)
- Resistance (0.8%+3)
- Capacitance (0.0%+3)
- 600.0% ±0.0. Capacitance: 6.000 nF – 60.00 mF ±(3% + 5)
- Frequency: 60.00 Hz – 10.00 MHz ±(0.1%+4)
- duty cycle: 0.1% - 99.9% ±(2.0%+5)
- Frequency response: -4 AC
400 Hz
- AC current frequency response: 45 - 400 Hz
- Power supply: 9V 6F22 carbon-zinc or 6LR61 alkaline battery
- LCD size: 66mm × 51mm
- Device weight: 473g
- Device dimensions: 195 mm × 1995 mm × 58 mm
Accessories:
- Test probes
- Battery
- carrying case
- manual
Manufacturer:
UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT191T PRO Line Multimeter
This product comes with a 3-year warranty. UT191T Professional Multimeter
UT191 series professional multimeters designed for industrial users. The UT191’s new function memory retains the most recent mode setting at the next power-up, improving user efficiency. The UT191T supports accurate and precise temperature measurement.
Applications:
This series of CE/GS/cTUVus-certified multimeters complies with CAT III 600V and has an IP65 rating, making it suitable for use in damp and dusty environments.
1. Measurement settings are saved after a power reset
2. IP65, 2 m drop resistance
3. True RMS/peak value measurement
4. Automatic backlight
5. 20A current measurement
6. AC LoZ measurement
7. Precise temperature measurement with 0.1 ℃ resolution
Specifications: Range
DC voltage (V): 600V ±(0.5%＋3)
AC voltage (V): 600V ±(0.7%＋3)
Local.
ACV LPF: 600V ±(2%＋5)
DC current (A): 20A ±(0.8%+3)
AC current (A): 20A ±(1%+3)
Resistance (Ω): 60MΩ ±(0.8%+2)
Frequency (Hz): 10Hz~1MHz ±(0.1%+4)
Frequency (Hz): 10Hz~1MHz ±(0.1%+4)
Duty cycle: 0.1%~99.9% ±(2%＋5)
Temperature (℃): -40℃~400℃ (0.1°C resolution) ± 0.1°C: +20)(temperature
ACV peak hold ±(2%+100)
Peak current detection ±(3%+100)
Features:
Display rate: 600 times/sec. Bar graph: 31 sections
True RMS: √
Frequency response for AC voltage 45Hz~400Hz
Frequency response for AC current 45Hz~400Hz
Diode/continuity test: √
Auto/manual range: √ Auto power-off
/>Battery auto-shutdown indicator: √ √
Data hold/MAX/MIN: √
Function selection (SELECT): √
Flashlight/Auto backlight: √
2 m drop test/IP65: √
General features:
Power: 9V battery size:
8mm x 4mm
Net product weight: 428g
Product colour: red and grey
Product dimensions: 180mm x 87mm x 59mm
Standard accessories: test lead, battery, carrying case, contact-type temperature probe
Standard individual packaging: Gift box, English manual
Standard quantity per box: 10 pcs. 545 mm x 315 mm x 335 mm
Standard gross weight per box: 8.8 kg
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT191E PRO Line Multimeter
This product comes with a 3-year warranty. UT191E Professional Multimeter
UT191 series professional multimeters designed for industrial users. The UT191’s new function memory retains the most recent mode setting at the next power-up, improving user efficiency.
Applications:
This series of CE/GS/cTUVus-certified multimeters complies with CAT III 600V and has an IP65 rating, suitable for use in damp and dusty environments.
1. Measurement setting saved after power reset
2. IP65, 2 m drop resistance
3. True RMS/peak value measurement
4. Automatic backlight
5. 20A current measurement
6. AC LoZ measurement
Specifications: Range
DC voltage (V): 600V ±(0.5%＋3)
AC voltage (V): 600V ±(0.7%＋3)
AC LoZ (V): 60+V ACV: 60+V 600V ±(2%+5)
DC current (A): 20A ±(0.8%+3)
AC current (A): 20A ±(1%+3)
Resistance (Ω): 60MΩ ±(0.8%+2)
Capacitance (F)(30%+mF): ±(30%+3) (Hz): 10Hz~1MHz ±(0.1%+4)
Duty cycle: 0.1%~99.9% ±(2%＋5)
ACV peak hold ±(2%+100)
Peak current detection ±(3%+100) Display
:
6000-digit display
Sampling rate: 3 times/second
Analogue bar graph: 31-segment graph
True RMS: √
AC voltage frequency response 45Hz–400Hz
AC current frequency response: 45Hz~400Hz
DC diode test:/>Continuity/DC range:/> √
Auto power off: √
Low battery indication: √
Data hold/MAX/MIN: √
Function selection (SELECT): √
Flashlight/Auto light: √
2 m drop test/IP65: √
General: √
General:
Power: 9V battery
LCD size: 58mm x 42mm
Net product weight: 428g
Product colour: red and grey
Product dimensions: 180mm x 87mm x 59mm
Standard accessories: test lead, battery, carrying case, individual gift box
Standard quantity per box: 10 pcs.
Standard box dimensions: 545mm x 315mm x 335mm
Standard box gross weight: 8.8kg
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. UNI-T UT18E tester. The UT18 series tester is designed to test AC/DC voltage (up to 1000V), three-phase voltage, phase sequence, continuity and much more. This series is CAT IV 600V rated and meets the IP65 protection standard. The voltage tester is designed to make life easier for electricians, technicians and other professionals working with electricity in all environments.
It is equipped with several useful functions for voltage identification. It has an automatic mode that detects AC or DC voltage and signals the presence of voltage via an audible and visual warning.
Product specifications:
- 8 voltage levels: 12V, 24V, 50V, 120V, 230V, 400V, 400V, 1/900V, 1/900V
sequence test
- automatic polarity test
- RCD function - residual current device test
- automatic shut-off
- Frequency measurement
- low impedance measurement
- Simultaneous LED and LCD display
- Audible alarm
- built-in LED torch
- CAT III 1000V / CAT III 10 600V
Technical specifications:
- voltage (AC/DC)
6V ±(1.5% + 1)
12V ±(1.5% + 2)
24V ±(1.5% + 2)
50V ±(1.5% + 1)
50V ±(1.5% + 4)
230V ±(1.5% + 5)
400V ±(1.5% + 5)
690V ±(1.5% + 5)
1000V ±(1.5% + 5)
phase rotation test 1.5% + 5)
-0 V AC, ~ 4–0 V AC 50 Hz–60 Hz
- continuity test
- audible and visual LED indication
- residual current device test 230V (50-400Hz)
- polarity detection
- automatic range: full range
- 1100V surge protection
- automatic standby current<br/1:0; full range
- Low battery indication: approx. 2.4 V
- LCD display (voltage): 6V–1000V
- LCD display (frequency): 40Hz–400Hz ±(3%+5)
- IP65 protection
- CAT III 1000V; CAT IV 600V
- Product colour: red, black
- Power supply: 2 x 1.5V AAA LR03 batteries
- Product weight (including batteries): 277g
- product dimensions: 272 x 85 x 31 mm
- Standard quantity per cardboard box: standard dimensions: 4 pcs. 380 x 365 mm
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT18B MAX digital multimeter is a reliable True-RMS digital multimeter. Designed to withstand interference, the multimeter can filter out interference from the carrier frequency superimposed on a sinusoidal wave signal or a variable voltage distortion signal, and is capable of measuring the output voltage of a variable frequency converter. In DC/AC voltage mode, the instrument can perform frequency and duty cycle measurements. The UT18B MAX features a temperature measurement function with a resolution of 0.1 °C. The LED test function allows the UT18B MAX to test LEDs with a voltage of up to 12 V without the need to determine polarity.
The UT15B/17B/18B MAX True RMS Multimeter series features fast response, standard EMC interference protection and a robust, portable design with a compact, interference-resistant build. Gold-plated test leads and fine-tip gold-plated test leads are included. They are also equipped with 1000 V input protection, making them an ideal tool for electronics and electrical engineers. Certifications: CE, UKCA, cETLus, REACH, RoHS
Product parameters:
- Large LCD display, 6000-count analogue-digital display, fast ADC refresh rate: 5 times per second
- Built-in VFD for accurate measurement of automatic/variable frequency bias voltage; relative measurement mode output for capacitance over 6.2 μF
- Full protection against false detection, allowing it to withstand a maximum overvoltage of 1000 V; designed with overvoltage and overcurrent indication
- designed with an LED measurement function (output: 12V) for automatic polarity identification
- the current input terminal is equipped with audible and visual indicators for incorrect connection
- two test probes (standard and fine tip)
- two backlight modes (high/low brightness).
- when the memory switch is in the current/as current position, - when the memory switch is in the current position. activated.
Technical parameters:
- DC voltage measurement ranges (DC current): 600 mV / 6 V / 60 V / 600 V / 1000 V ±(0.4%+3)
- DC voltage measurement ranges (AC current): 60 / 60 V / 60 V / 60 V / 60 V / 1000 V ±(0.5%+5)
- VFD (voltage): 600 V ±(8%)
- AC current measurement ranges (alternating current): 600 μA / 6000 μA / 60 mA / 600 mA / 6 A / 6 A / ± 3.5 A / ± 3(1.2 A / ± 3) current (direct current): 600 μA / 6000 μA / 60 mA / 600 mA / 6 A / 10 A ±(1.2%+3)
- resistance measurement ranges: 600 Ω / 6 kΩ / 60 kΩ / 600 kΩ / 600 kΩ / 600 kΩ / 600 kΩ ±2)
0. Frequency measurement range: 10 Hz to 10 MHz ±(0.1%+3)
- duty cycle measurement range: 1% to 99.9% ±(1.0%+4)
- Temperature measurement range: -55 °C to 500 °C
- HTN-type LCD display with a maximum test mode of 6:00:00 HOLD
- Relative measurement mode
- Backlight (adjustable)
- Automatic or manual setting ranges
- Auto-off (sleep mode during inactivity)
- low battery indicator
- audible and visual alarm
- LED test
- incorrect connection alarm
- Category: CATⅢ 2/60 CATⅢ power supply
1.5V batteries
- weight: 455 g
- dimensions: 182 mm x 91 mm x 45 mm
- accessories: 1 user manual, 2 pairs of test leads (standard gold-plated probe and fine-tip probe), 1 K-type thermocouple, 2 batteries.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT18D Voltage Tester
This product comes with a 3-year warranty. UT18D Tester. The UT18D series tester is designed to test AC/DC voltage, three-phase voltage, phase sequence, continuity and much more. This series is CAT IV 600V rated and meets the IP65 standard. Unlike the UT18C, the UT18D tester features a backlit LCD screen. These voltage testers are the perfect tool for electricians to quickly measure voltage levels in all environments.
It is equipped with several useful voltage identification functions. It has an automatic mode that detects AC or DC voltage and signals the presence of voltage via an audible and visual alert.
Product specifications:
- large LCD display
- RCD test
- extremely durable design
- dustproof, water-resistant (IP65)
LED rotation test
-/integrated LED
-/integrated buzzer
- polarity detection
Technical parameters:
- voltage
6V from 5V±1V
12V from 8V±1V
24V from 18V±2V
50V from 38V±1V
±1V
24V from 18V±2V
50V from 38V±1V
94V±8V
230V from 180V±14V
400V from 325V±15V
690V from 562V±24V
- phase rotation test 100V–690V, 50Hz–60Hz conductivity test
-- RCD test 2
- 3 (50–400Hz)
- polarity detection
- self-test
- voltage indication - LED diodes
- IP65
- automatic range adjustment
- built-in LED torch
- low battery indicator
- overvoltage 713V–78V
- LCD display (silent mode
78-8V) 6V-690V ±(1.5%+5)
- LCD display (frequency) 40Hz–400Hz ±(3%+5)
- display backlight
- Power supply: 2x1.5V R03 batteries
- Weight 280g
- LCD dimensions 3/73.55. 272x85x31mm
- Accessories: batteries, instructions
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT18C Voltage Tester
This product comes with a 3-year warranty.
UT18C Voltage Tester
The UT18 series tester is designed to test AC/DC voltage, three-phase voltage, phase sequence, continuity and much more. This series is rated CAT IV 600V and meets the IP65 standard. Unlike the UT18D, the UT18C features non-contact measurements in the 100–690V range. These voltage testers are the perfect tool for electricians to quickly measure voltage levels in all environments.
* RCD test, LCD display
* Very robust construction
* Proven dust and water jet resistance (IP65)
* Voltage indication via LEDs
* Integrated LED light
* Phase rotation test
* continuity buzzer
* polarity detection
SPECIFICATIONS
DC)
12V min 8V±1V
24V min 18V±2V
50V min 38V±4V
120V min 94V±8V
230V min 180V±14V
400V min 325V±16V 562V±24V
Phase rotation test 100V–690V, 50Hz–60Hz
Polarity detection
RCD test
Self-test
No power test 100V~690V
FUNCTIONS Voltage indication
LEDs
IP65
Autorange
Integrated LED light
Low battery indicator
Overvoltage 713V–788V
Silent mode
LCD display (Voltage) 6V–690V ±(1.5%+5)
LCD display (Frequency 40Hz-40) ±(3%+5)
GENERAL FEATURES
Power supply: 2x1.5V R03 batteries
LCD size: 31x20mm
Weight 280g
Dimensions 272x85x31mm
Accessories: battery, manual
TREND/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT181A Multimeter
The UNI-T UT181A is a smart portable multimeter with automatic or manual range switching that measures RMS, maximum, minimum or average values. The device belongs to a superior class, excels in quality design and reliability, and is suitable for industrial use. It is water and dust resistant, rated IP65. The display is a backlit graphic LCD with a maximum resolution of 4 5/6 digits, the maximum display value being ±60,000. The multimeter allows measurement of AC/DC voltages and currents, resistance, diode testing, continuity testing, capacitance, frequency, duty cycle, temperature, conductivity, comparative measurement, relative value measurement, data peak detection up to 02000 and data logging. The device allows data to be stored on a PC using an optically isolated USB adapter or Bluetooth. The display includes an analogue bar graph with 61 segments. The multimeter has an internal clock that displays the time and date, which can be automatically assigned to stored samples of measured values at intervals ranging from 1 second to 1 hour, including storage time (up to days). Option to include a low-pass filter for measurements on inverters and generators. Temperature measurement is possible on two channels. The fuses are protected by tubular fuses (10A FF 10A H / 1000V fuse (10 x 38mm); mA/µA FF 800mA H / 600V fuse (6 x 32mm)). The device can test its own fuses (without opening the device). The multimeter is powered by a 7.4V/2000mAh lithium battery. Test leads with CAT III 1000V and CAT IV 600V safety-rated tips are included.
Product specifications:
- fully complies with IEC / EN61010-1 and has double insulation
- classified as CAT III 1000V - internal installation including three-phase distribution
- classified as CAT IV 600V - external electrical installation (fuse elements, start of internal installation)
- Colour display (64K colours), 3.5" TFT LCD graphic display with 320 x 240 pixel resolution
- maximum display is 60,000,
- 60,000-count frequency measurement display
- Display for automatic or manual capacitance measurement 60-
accuracy
- AC voltage measurement ranges - 60 mV / 1000 V for frequencies from 45 Hz to 100 kHz
- AC current measurement ranges - 600 μA / 10 A for frequencies from 45 Hz to 10 kHz
- DC measurement range / V - 160 mV - 160 mV DC current measurement ranges - 600 μA / 10 A
- AC+DC measurement ranges (AC voltages with DC component) - 60 mV / 1000 V
- AC+DC measurement ranges (AC currents with DC component) - 600 µA / 10 A
- Resistance range 600 µA / 10 A- 60 mV / Ω
- Capacitance measurement ranges - 6.00 nF / 60.00 mF
- Measurement ranges from 60 Hz to 60 MHz
- Square wave generator from 0.5 Hz to 4800 Hz
- Measurement range from 10% to 99% (10 Hz to 10 Hz) of the pulse width
-02k-0 250.0 ms
- Conductivity measurement range 60 nS
- Temperature measurement range: -40°C to 1000°C (with supplied K-type nickel-chromium-nickel-silicon thermocouples only up to +230°C)
- analogue bar graph measurement scale, voltage measurement 61 bar graph, TRRM/61 voltage division, voltage and currents
- during AC voltage measurement, the frequency or duty cycle of the voltage can be measured on the secondary display
- on the secondary display, it is possible to measure the AC component superimposed on DC voltage
- data logging of 20,000 values
- possibility of relative measurement of the s, B value on a logarithmic scale with simultaneous display of voltage on the secondary display in V
- ability to store samples of measured values at intervals ranging from 1 second to 1 hour, including the duration for which data is to be saved (up to days)
- Measurement of MAX and MIN peaks with a 1 ms response time
- Indication of loose connections
- Automatic setting of battery shutdown time
- Battery auto-shutdown indicator (in MENU)
- Overload protection for voltage inputs
- Current input protection with fast-acting fuses
- Input impedance 10MΩ
- Testing of diodes and semiconductor junctions with voltages from 0 to 3V
- Powered by a 7.4V / 2000mAh Li-ion battery; the USB cable can be downloaded from the manufacturer’s website; the software can be downloaded from the manufacturer’s website: https://meters.uni-trend.com/product/ut181a/
- Optional UT-D08 Bluetooth adapter available
- Supplied with a 10V DC / 500mA power supply and accessories
- EMF measurement is possible at 1V/m with an additional error of 5%
Technical parameters
. :
(Accuracy is defined at 23 °C ± 5 °C and relative humidity less than or equal to 75%; calibration is recommended once a year)
- DC voltage measurement (input impedance is 10 mΩ):
(range/resolution/accuracy)
60.00 mV///range/resolution/accuracy)
600.00 mV / 10 µV / ± 0.025 % + 5
6.0000 V / 0.1 mV / ± 0.025 % + 5
60.000 V / ± 5.000 V / ± 0.1 mV / ± 0.1 mV 600.00 V / 10 mV / ± 0.03 % + 5
1000.0 V / 0.1 V / ± 0.03% + 5
- AC voltage measurement (input impedance approx. 10 MΩ; 45 Hz to 1 kHz; 1 kHz to 1 kHz; 1 kHz to 1 kHz; 10 kHz to 20 kHz; 20 kHz to 100 kHz):
(range / resolution / accuracy up to 1 kHz / accuracy up to 10 kHz / accuracy up to 20 kHz / accuracy up to 20 kHz) mV / 1µV / ± 0.6 % +60 / ± 1.2 % + 60 / ±3 % + 60 / ±4 % + 60
600.00 mV / 10 µV / ± 0.3 % +30 / ± 1.2 % + 40 / ±4 % / ±4 % / ±4 %
6.0000 V / 0.1 mV / ± 0.3 % +30 / ± 1.2 % + 40 / ±3 % + 40 / ±4 % + 40
60,000 V / 1 mV / ± 0.3 % +30 / ± 1.2 % + 40 / ± 1.2 % + 4 % / ± 4 % / ± 4 % / ± 4 %
600.00 V / 10 mV / ± 0.3 % +30 / ± 1.2 % + 40 / ±3 % + 40 / for guidance only
1000.0 V / 0.1 V / ± 0.6 % + 30 / ± 3 % + 40 / ± 6 % ++ cc
< / for guidance only
voltage measurement (input impedance approx. 10MΩ; 45Hz to 1kHz; 1kHz to 10kHz; 10kHz to 35kHz):
(range / resolution / accuracy up to 1 kHz / accuracy up to 1 kHz / accuracy up to 1 kHz / accuracy up to 1 kHz 35 kHz)
60.00 mV / 1 µV / ± 1 % +80 / ± 3 % + 40 / ± 6 % + 60
600.00 mV / 10 µV / ± 1 % +80 / ± 3 % + 40 / ± 6 % + 60 / ±6 %/0. / ± 1 % +80 / ± 3 % + 40 / ±6 % + 40
60,000 V / 1 mV / ± 1 % +80 / ± 3 % + 40 / ±6 % + 40
600.00 V / 10 mV / ± 1 % indicative only / 80 / ± 1 % + 80 / ± 1 % indicative 1000.0 V / 0.1 V / ± 1.2 % + 80 / indicative only / indicative only
- DC measurement:
(range / resolution / accuracy)
600.0 μA / 0.01 μA / ± 0.20 μA / ± 0.20 μA / + 0.20 μA / . μA / ± 0.25 % + 2
60,000 mA / 1 μA / ± 0.7 % + 2
600.0 mA / 10 μA / ± 0.15% + 2
6,000 A / 0.1 mA / ± 0.1 mA / ± 1.0 1 mA / ± 0.5 % + 2
- AC current measurement (45 Hz to 1 kHz; 1 kHz to 10 kHz):
(range / resolution / accuracy up to 1 kHz / accuracy up to 10 kHz)
0 μA / 0 μA ± 0.6% + 40 / ± 1.2% + 40
6000.0 μA / 0.1 μA / ± 0.6 % + 20 / ± 1.2 % + 40
60,000 mA / 1 μA / ± 0.6% + 40% / ± 4% + 40%
600.00 mA / 10 μA / ± 0.6 % + 20 / ± 1.2 % + 40
10,000 A / 1 mA / ± 1 % + 20 / ± 3 % + 40
- AC+DC current measurement up to (1 kHz to 10 kHz at; 10 kHz):
(range / resolution / accuracy up to 1 kHz / accuracy up to 10 kHz)
600.00 μA / 0.01 μA / ± 0.8 % + 40 / ± 2 % + 40 / ± 2 % + 40 μA / ± 0 μA / ± 0 μA / ± 0.01 μA 0.8 % + 20 / ± 2 % + 40
60,000 mA / 1 µA / ± 0.8 % + 40 / ± 2 % + 40
600.00 mA / 10 µA / ± 0.8% + 20 / ± 1% / 0.0% + 40
± 1.2 % + 20 / ± 3 % + 40
- Resistance and conductivity measurements:
(range / resolution / accuracy)
600.00 Ω / 0.01 Ω / In REL mode: ± 0.05 %/0.01 Ω / 0.05 %/0 Ω 0.1 Ω / ± 0.05 % + 2
60,000 kΩ / 1 Ω / ± 0.05 % + 2
600.00 kΩ / 1 Ω / ± 0.05 % + 2
6.0000 MΩ / 0.1 kΩ / ± 0.1 kΩ / 0.1 kΩ / ± 0.1 kΩ / 1 Ω / ± 0.05 % + 2 60.000 MΩ / 1 kΩ / ± 2 % + 10
60.00 nS / 0.01 nS / ± 2 % + 10 (S = Siemens unit)
- Capacitance measurement:
6,000 nF / 1 pF / ± 3.0 % + 10
60.00 nF / 10 pF / ± 2.5 % + 5
600 nF to 600 µF / 0.1 nF to 0.01 µF / ± 2.5 % / ± 6 mF / ± 2.5 % + 5
% + 5
60 mF / 10 µF / Not specified
- Measurement of frequency, duty cycle and period (pulse width):
(range / resolution / accuracy)
60.0.0.0.000 Hz / Hz / ± 0.000. % + 8
600 Hz to 60 MHz / 0.01 Hz to 0.001 MHz / ± 0.01 % + 5
10 % to 90 % (10 Hz to 2 kHz) / 0.01 % / ± 1.2 % + 30 µs / ± 25 µs / ± s / s 1.2 % + 30
- display type: 64K colour TFT LCD, with 320 x 240 px resolution
- number of digits: 60,000
- analogue display: 61 segments
- power supply: 7.4V Li-ion battery / 1000 mAh with 10A H / 1000V fuse (10 x 38mm)
- fuse: 800mA H / 1000V (6 x 32mm)
- device dimensions: 225 x 103 x 59 mm
- Weight: approx. 6°C to operating temperature
- 50°C
- relative operating humidity at 0°C to 30°C less than or equal to 80%; at 30°C to 40°C less than or equal to 75%; at 40°C to 50°C less than or equal to 45%;- operating altitude; 30°C to 60°C
- Option to purchase a UT-D07 Bluetooth adapter for transferring data to a PC
- The device complies with the following standards:
cETLus, CAT III 1000V, CAT IV 600V, double insulation, overvoltage protection < 1/00 V 61326-1: 2013; EN 61326-2-2: 2013
EN 61010-1: 2010; 61010-1, 61010-2-030
Certified to CSA STD C22.2 No. 61010-1, 61010-2-030, 61010-2-033
- Manufacturer: UNI-TR/
Package contents:
- UT181A multimeter with storage case
- 7.4V / 2000mAh Li-ion battery - in the device
- Fuse F1: FF 800 mA H 1000 V (6 x 32 mm) – in device
- Fuse F2: FF10 - 1000 V (FF100) in device
- 1 x USB cable with opto-electronic converter
- 2 x Type K thermocouple (nickel-chromium-nickel-silicon) up to +230°C
- 1 pair of test leads with CAT III 1000 V, CAT IV 600 V tips
- 1x DC charging connector
-
10V / 500mA
- user manual in Czech, Slovak and English
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT17B MAX digital multimeter is a reliable True-RMS digital multimeter. Designed to withstand interference, the multimeter can filter out interference from the carrier frequency superimposed by a sinusoidal wave signal or a variable voltage distortion signal and is capable of measuring the output voltage of a variable frequency converter. In DC/AC voltage mode, the instrument can perform frequency and duty cycle measurements. The UT17B MAX features a temperature measurement function with a resolution of 0.1 °C.
The True RMS multimeters in the UT15B/17B/18B MAX series feature a compact and portable design, fast response, strong protection against EMC interference, and come with standard gold-plated test leads and fine gold-plated test leads. They are also equipped with 1000 V input protection, making them an ideal tool for electronic and electrical engineers. Certifications: CE, UKCA, cETLus, REACH, RoHS
Product specifications:
- Large LCD display, 6000-count analogue-digital display, fast ADC refresh rate: 5 times per second
- Built-in VFD for precise measurement of automatic/variable frequency bias voltage; output from relative measurement mode for capacitance over 6.2 μF in relative measurement mode
- Ability to capture maximum/minimum (MAX/MIN) values during voltage, current and resistance measurement
- full protection against false detection, enabling it to withstand a surge voltage of up to 1000 V; designed with overvoltage and overcurrent indication
- the current input terminal is equipped with audible and visual indicators for incorrect connection
- two test probes (standard and fine-tip)
- LED indication for high test voltage (≥30 V).
- Two backlight modes (high/low brightness).
- When switching positions, the AC/DC memory function is activated.
Technical parameters:
- DC voltage measurement ranges (direct current): 600 mV / 6 V / 60 V / 600 V / 1000 V ±(0.4%+3)
- DC voltage measurement ranges (AC current): 60 / 60 V / 60 V / 60 V / 60 V / 1000 V ±(0.5%+5)
- VFD (voltage): 600 V ±(8%)
- AC current measurement ranges (alternating current): 600 μA / 6000 μA / 60 mA / 600 mA / 6 A / 6 A / ± 3.5 A / ± 3(1.2 A / ± 3) current (direct current): 600 μA / 6000 μA / 60 mA / 600 mA / 6 A / 10 A ±(1.2%+3)
- resistance measurement ranges: 600 Ω / 6 kΩ / 60 kΩ / 600 kΩ / 600 kΩ / 600 kΩ / 600 kΩ ±2)
0. Frequency measurement range: 10 Hz to 10 MHz ±(0.1%+3)
- duty cycle measurement range: 1% to 99.9% ±(1.0%+4)
- Temperature measurement range: -55 °C to 500 °C
- HTN-type LCD display with a maximum test mode of 6:00:00 HOLD, MAX/MIN
- Relative measurement mode
- Backlight (adjustable)
- automatic or manual setting ranges
- Auto-off (sleep mode during inactivity)
- low battery indicator
- audible and visual alarm
- incorrect connection alarm
- category: CATⅢ 2/00V power source
- 6 batteries
- weight: 455 g
- dimensions: 182 mm x 91 mm x 45 mm
- accessories: 1 user manual, 2 pairs of test leads (standard gold-plated probe and fine-tip probe), 1 type K thermocouple, 2 batteries.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT171C Multimeter
The UT171 series multimeters are portable multimeters with automatic and manual range switching and a resolution of 4 3/4 to 4 5/6 digits. These devices belong to the upper mid-range class, excel in quality design and reliability, and are also suitable for industrial use. They can measure AC/DC voltage and current, resistance, diode test, continuity test, capacitance, frequency, duty cycle, temperature, 4-20mA current loop, conductivity, VFC, and NCV. The devices allow data storage and connection via USB with optical isolation or via Bluetooth.
The UNI-T UT171C multimeter is the best instrument in the UT171 series.
Unlike the UT171A, the UT171C has a wider range for resistance and capacitance measurement, as well as (reverse) resistance measurement. The display type is OLED with a dot matrix. The display range is ±60,000 for voltages, currents and frequencies, and ±6,000 for capacitance measurements. The display includes a 31-segment analogue bar graph. The refresh rate is 4 to 5 times per second. The fuses are protected by tubular fuses (10A FF 10A H / 1000V fuse (10 x 38mm); mA / µA FF 800mA H / 600V fuse (6 x 32mm)). The device can test its own fuses (without opening the device). The multimeter is powered by a 7.4 V / 1800 mAh lithium battery. The measurement range can be selected automatically or manually. Test leads with tips in safety categories CAT III 1000V and CAT IV 600V are included.
Product specifications:
- fully compliant with IEC/EN61010-1 and feature double insulation
- classified as CAT III 1000V - electrical installation including three-phase distribution
- classified as CAT IV 600V - outdoor electrical installation (fuse boxes, start of indoor installation)
- Maximum display is 60,000, an inverted OLED dot-matrix display
- 60,000-count frequency measurement display
- 6000 capacitance measurement display
- Refresh rate for most measurements: 4 to 5 times per second
- Manual measurement range
-/> Ranges: 600 mV / 1000 V
- AC current measurement ranges: 600 μA / 10 A
- DC voltage measurement ranges: 600 mV / 1000 V
- DC current measurement ranges: 600 μA / 10 A
- Current measurement ranges
-600/10 A
Clamp A
- Resistance measurement ranges: 600 Ω / 60 MΩ
- Capacitance measurement ranges: 60.00 nF / 60.00 mF
- Measurement ranges: 60 Hz to 10 MHz
- Square-wave signal generator duty cycle from 0.80 Hz to 0.80 Hz
: 1.0% to 99%
- Duty cycle measurement range: 100.0 ms to 0.100 µs
- Conductivity measurement range: 60 nS
- Temperature measurement range: -40 °C to 1000 °C (supplied only with a K-type thermocouple + nickel-chromium-silicon + nickel 230°C)
- High accuracy
- Analogue bar graph scale, 31 divisions
- TRMS, measurement of rms voltage, AC voltage and currents
- During AC voltage measurement, the frequency or duty cycle of the voltage can be measured on the secondary display
- On the secondary display, it is also possible to measure the AC component superimposed on DC voltage
- Data logging of 1000 values
- Relative measurement mode
- measurement of MAX and 1 MIN peak response
Faulty wiring
- Low battery indicator
- Auto-off (sleep mode when inactive)
- Overload protection for voltage inputs
- Overvoltage protection on inputs with fast-acting fuses
- 10MΩ input impedance
- Non-contact voltage detection without test probes
- Semiconductor transition to diodes and 3V voltage test semiconductors
- Powered by a 7.4V / 1,800mAh Li-ion battery
- USB cable supplied with converter; software can be downloaded from the manufacturer’s website: https://meters.uni-trend.com/product/ut171-series/#Docs
- Option to purchase a Bluetooth adapter
DC-D08V/UT-D08V supplied with 500mA power supply and accessories
- Measurement in electromagnetic fields with an intensity of 1V/m is also possible, with an additional error of 5%
Technical parameters:
(accuracy is defined at 23°C ± 5°C and relative humidity less than or equal to 75%)
- DC voltage measurement (input impedance) resolution is:
600.00 mV / 10 µV / ± 0.025% + 5
6.0000 V / 0.1 mV / ± 0.025 % + 5
60.000 V / 1 mV / ± 0.025 % + 5 / ± 0.0 mV / ± 0.0 mV 0.03 % + 5
1000.0 V / 100 mV / ± 0.03 % + 5
- AC voltage measurement (input impedance is 10 MΩ, 45 Hz to 1 kHz):
(range / resolution / accuracy)
0.03 % + 5 mV ± 0.4 % + 40
6.0000 V / 0.1 mV / ± 0.025 % + 5
60,000 V / 1 mV / ± 0.025 % + 5
600.00 V / 10 mV / 10 mV / ± 0.000 V / 1 mV / ± 0.000 V / 1 mV / ± 0.000 V / 10 mV / ± 0. 100 mV / ± 0.03% + 5
LoZ 100.0 V / 0.1 V / ± 2.0 % + 10
V.F.C. 600V/1000V / 0.01 V/0.1 V / ± 2.0 % + 10
- DC measurement:
(range / resolution / accuracy)
600.0 μA / 0.01 μA / ± 0.20 μA / ± 0.20 μA / ± 0.20 %/0 μA 0.1 μA / ± 0.25 % + 2
60,000 mA / 1 μA / ± 0.7 % + 2
600.0 mA / 10 μA / ± 0.15% + 2
6,000 A / 0.1 mA / ± 0.1 mA / 1 mA / ± 0.5 % + 2
% (4–20 mA) / 0.01 % / ± 0.5 % + 2
- AC current measurement (45 Hz to 1 kHz):
(range / resolution / accuracy)
- AC current measurement (45 Hz to 1 kHz):
(range / resolution / accuracy)
0. 0.75% + 20
6000.0 μA / 0.1 μA / ± 0.75% + 20
60,000 mA / 1 µA / ± 0.75% + 20
600.000 mA / ± 2.0 µA / ± 2.0 %
6.0000 A / 0.1 mA / ± 1.5 % + 20
10,000 A / 1 mA / ± 1.5 % + 5
- DC current measurement using the current clamp:
60 A range (at 10 mV / ± 0.01 accuracy) + 30)
600A range (at 1mV/A) / resolution 0.01A / accuracy ±(1.0% + 30)
- AC current measurement using the current clamp:
60A range (at 10mV/A) / resolution 0.001%/(0.001%
/ accuracy) range 600A (at 1mV/A) / resolution 0.01A / accuracy ±(1.2% + 30)
- Resistance and conductivity measurement:
(range / resolution / accuracy)
600.00 Ω / 0.01 Ω / 0.01 Ω / ± 0.0 Ω / ± 0.0 Ω / ± 0.0 Ω / ± 0.0 Ω kΩ / 0.1 Ω / ± 0.05 % + 2
60,000 kΩ / 1 Ω / ± 0.05 % + 2
600.00 kΩ / 10 Ω / ± 0.05 % + 2
6,000 MΩ / ± 0.000 Ω / ± 0.05 % + 2
60,000 MΩ / 1 kΩ / ± 3 % + 2
60.00 nS / 0.01 nS / ± 1 % + 10 (S = Siemens unit)
- Capacitance measurement:
(range / resolution / accuracy)
3 p.
60.00 nF to 600.0 µF / 10 pF to 100 nF / ± 2.5 % + 5
6.000 mF to 60.00 mF / 1 µF to 10 µF / ± 10 % measurement period: cycle and frequency
Measurement range: (range / resolution / accuracy)
60,000 Hz to 10,000 MHz / 0.0001 Hz to 0.001 MHz / ± 0.01% + 5
0.1% to 99.9% / 0.1% / ± 3.0% / ¼ to 410
- Square wave generator:
Frequency 0.5 Hz to 4800 Hz / 0.1 Hz step size / accuracy 0.1 % / ± ¼ to 5 %. 100% / 0.1% step size / accuracy ± 0.5 %
Amplitude / 0.8 Vp / accuracy ± 0.2 Vp
- Inverted display type, dot-matrix OLED
- Sampling frequency: 4 to 5 / 0 sec. Analogue display: 31 segments
- Power supply: 7.4V / 1800mAh Li-ion battery
- 10A fuse protection with FF 10A H / 1000V fuse (10 x 38mm)
- mA / µA fuse protection: FF 800mA / 610mA/H 30/mm fuse; instrument dimensions: 206 x 95 x 53 mm
- Weight: approx. 500 g (including batteries)
- operating temperature: 0°C to 40°C
- relative operating humidity at 0°C to 30°C less than or equal to 75%, at 30°C to 40°C less than or equal to 50%
- Storage temperature: -5/10°C; up to -10°C for current clamps, for ranges up to 600A
- The device complies with the following standards:
cETLus, CAT III 1000V, CAT IV 600V, double insulation, overvoltage protection greater than 1000V
EN 61326-1: 201; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
Compliant with UL STD.: 61010-1, 61010-2-030
Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
- Manufacturer: UNI-TREND
-
Package contents:
- UT171C multimeter with Li-I storage case
-7 with 4V, 1800mAh battery - built-in
- Fuse F1: FF 800mA H 1000V (6 x 32mm) - in device
- Fuse F2: FF 10A H 1000V (10 x 38mm) - in device
- USB cable with opto-electronic converter
- Type K thermocouple (nickel-chromium-nickel-silicon) up to +230 °C
- Test leads with CAT III 1000V, CAT IV 600V tips
- DC 10V / 500mA power supply with accessories
- User manual in Czech, Slovak and English
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT171B Multimeter
The UT171 series multimeters are portable multimeters with automatic and manual range switching and a resolution of 4 3/4 to 4 5/6 digits. These devices belong to the upper mid-range class, excel in quality design and reliability, and are also suitable for industrial use. They can measure AC/DC voltage and current, resistance, diode test, continuity test, capacitance, frequency, duty cycle, temperature, 4-20mA current loop, conductivity, VFC, and NCV. The devices allow data storage and connection via USB with optical isolation or via Bluetooth.
UNI-T UT171B Multimeter
Unlike the UT171A, the UT171B has a wider range for resistance and capacitance measurements and also measures conductivity (reverse resistance). The display type is VT-WLCD, with data displayed in bright text on a dark background. The display range is ±60,000 for voltages, currents and frequencies, and ±6,000 for capacitance measurements. The display includes a 31-segment analogue bar graph. Refresh rate of 4 to 5 times per second. The fuses are protected by tubular fuses (10A FF 10A H / 1000V fuse (10 x 38mm); mA/µA FF 800mA H / 600V fuse (6 x 32mm)). The device can test its own fuses (without opening the device). The multimeter is powered by a 7.4 V / 1800 mAh lithium battery. The measurement range can be selected automatically or manually. Test leads with tips in safety categories CAT III 1000V and CAT IV 600V are included.
Product specifications:
- fully compliant with IEC / EN61010-1 and feature double insulation
- classified as CAT III 1000V - electrical installation including three-phase distribution
- classified as CAT IV 600V - outdoor electrical installation (fuse boxes, start of internal installation)
- maximum display is 60,000, VT-WLCD reverse display
- Frequency measurement display 60,000
- Capacitance measurement display 6000
- Refresh rate for most measurements: 4 to 5 times per second
- Automatic voltage measurement range
- 600 mV / 1000 V
- AC current measurement ranges: 600 μA / 10 A
- DC voltage measurement ranges: 600 mV / 1000 V
- DC current measurement ranges: 600 μA / 10 A
- Voltage measurement range: 600 mV / 1000 V
- MΩ
- Capacitance measurement ranges: 60.00 nF / 60.00 mF
- Measurement ranges: 60 Hz to 10 MHz
- Duty cycle measurement range
- Conductance measurement range: 60 nS
- Temperature measurement range: °C ~ -10,000 °C (nickel-chromium-nickel-silicon thermocouple only up to +230 °C)
- High accuracy
- Analogue bar graph scale, 31 divisions
- TRMS, measurement of rms voltage, AC voltage and currents
- During AC voltage measurement, the frequency or duty cycle of the voltage can be measured on the secondary display
- On the secondary display, it is also possible to measure the AC component superimposed on DC voltage
- Data logging of 1000 values
- Relative measurement mode
- measurement of MAX and 1 MIN peak response
Faulty wiring
- Low battery indicator
- Auto-off (sleep mode when inactive)
- Overload protection for voltage inputs
- Overvoltage protection on inputs with fast-acting fuses
- 10MΩ input impedance
- Non-contact voltage detection without test probes
- Semiconductor transition to diodes and 3V voltage test semiconductors
- Powered by a 7.4V / 1800mAh Li-ion battery
- USB cable supplied with opto-electrical converter; software can be downloaded from the manufacturer’s website: https://meters.uni-trend.com/product/ut171-series/#Docs
- Supplied with a 50 V DC power supply / option for 10 V DC power supply
via the UT-D08 Bluetooth adapter
- measurement in electromagnetic fields with an intensity of 1 V/m is also possible, with an additional error of 5%
Technical parameters:
(accuracy is defined at a temperature of 23°C ± 5°C and relative humidity less than or equal to 75%)
- DC voltage measurement (input impedance) is 10 MΩ:
(range / resolution / accuracy)
600.00 mV / 10 µV / ± 0.025% + 5
6.0000 V / 0.1 mV / ± 0.025 % + 5
+ 5
600.00 V / 10 mV / ± 0.03 % + 5
1000.0 V / 100 mV / ± 0.03% + 5
- AC voltage measurement (input impedance approx. 10M, 45 Hz) 45 Hz 45 Hz (range / resolution / accuracy)
600.00 mV / 10 µV / ± 0.4 % + 40
6.0000 V / 0.1 mV / ± 0.025% + 5
60.000 V / 1 mV / ± 0.000 V / 0.1 mV / ± 0.1 mV / ± 0.025 % + 5
60.000 V / 1 mV / ± 5 % / 0.50 × 10 mV / ± 0.03 % + 5
1000.0 V / 100 mV / ± 0.03% + 5
LoZ 100.0 V / 0.1 V / ± 2.0 % + 10
V.F.C. 600 V/1000 V / 0.01 V/0.1 V / ± 2.0 % + 10
- DC measurement:
(range / resolution / accuracy)
600.0 μA / 0.01 μA / ± 0.02% / ± 0.02 μA / ± 0.02%. μA / 0.1 μA / ± 0.25% + 2
60,000 mA / 1 μA / ± 0.7 % + 2
600.0 mA / 10 μA / ± 0.15% + 2
6,000 A / ± 3,000 mA / ± 3.0 % + 2
10,000 A / 1 mA / ± 0.5 % + 2
% (4–20 mA) / 0.01% / ± 0.5% + 2
- AC current measurement (45 Hz to 1 kHz):
0 / hour > resolution 0 / 0 μA / hour / 0.01 μA / ± 0.75% + 20
6000.0 μA / 0.1 μA / ± 0.75 % + 20
60,000 mA / 1 μA / ± 0.75% + 20
600,000
6.0000 A / 0.1 mA / ± 1.5 % + 20
10,000 A / 1 mA / ± 1.5 % + 5
- Resistance and conductivity measurement:
/00000 A / 1 mA / ± 1.5 % + 5
- Resistance and conductivity measurement:
/0000000 A / 0 / 00000 A / 0.01 Ω / ± 0.05 % + 10
6.0000 kΩ / 0.1 Ω / ± 0.05% + 2
60,000 kΩ / 1 Ω / ± 0.05 % + 2
600.00 kΩ / ± 20.00 kΩ / ± 2. 6,000.00 MΩ / 100 Ω / ± 0.15% + 5
60,000 MΩ / 1 kΩ / ± 3 % + 2
60.00 nS / 0.01 nS / ± 1 % + 10 (S = Siemens unit of capacitance)
(range / resolution / accuracy)
6,000 nF / 1 pF / ± 3.0% + 30
60.00 nF to 600.0 µF / 10 pF to ± 5.0 nF / ± 5.0 pF / ± 1. 6.000 µF to 60.00 µF / 1 µF to 10 µF / ± 10 %
- Frequency and duty cycle measurement:
(range / resolution / accuracy H 60)0. 10,000 MHz / 0.0001 Hz to 0.001 MHz / ± 0.01 % + 5
0.1% to 99.9% / 0.1% / ± 3.0% + 40
100.0 ms to 0.100 µs / ± 0.100 µs / µs / ± 3.0 % + 40 0.1 % + 5
- display type: inverted backlit VT-WLCD
- sampling frequency: 4 to 5/sec
- number of digits: 60,000
- analogue display: 31 segments
- power supply: LiIon battery 7/18–40 mAh
18–40 mAh safety fuse FF 10A H / 1000V (10 x 38mm)
- mA/µA protection: FF 800mA H / 1000V fuse (6 x 32mm)
- instrument dimensions: 206 x 95 x 53 mm
- weight: approx. 500 g (including batteries)
- operating temperature: 0 °C to 40 °C
- relative operating humidity: 0 °C to 30 °C ≤ 75%, 30 °C to 40 °C ≤ 50%
- device storage temperature: -5/10 °C :
cETLus, CAT III 1000V, CAT IV 600V, double insulation, overvoltage protection greater than 1000V
EN 61326-1: 2013; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
Compliant with UL STD.: 61010-1, 61010-2-030
Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
- Manufacturer: UNI-TREND
-
Package contents:
- UT171B, storage case and Li-Ion-7 multimeter with 1800mAh battery - in device
- Fuse F1: 6 x 32mm FF 800mA H 1000V (6 x 32mm) – in the device
- Fuse F2: 6 x 25mm FF 10A H 1000V (10 x 38mm) – in the device
-- USB cable with optical converter
- Type K thermocouple (nickel-chromium-nickel-silicon) up to +230 °C
- Test leads with CAT III 1000V, CAT IV 600V tips
- DC 10V / 500mA power supply with accessories
- user manual in Czech/Slovak/English
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT161E Multimeter
This product comes with a 3-year warranty. The UT161 series of multimeters is a range of extremely reliable, safe, durable and accurate multimeters that are CE-certified and suitable for the European market. The displays on these multimeters are backlit LCDs (dark digits on a light background) with a resolution of ±6000 (for the UT161B and UT161D) and ±22000 for the UT161E. The displays have a refresh rate of 2–3 times per second and also feature an analogue bar graph with 31 segments (UT161B and UT161D) or 41 segments (UT161E). The multimeters measure AC and DC voltages up to 1000V and are equipped with an audible and visual warning when maximum voltage/current or temperature values are reached. They allow for non-contact detection of live AC wires. The package includes a USB cable with an opto-electronic converter for data transfer to a PC. The power supply consists of four AAA (R03) batteries, and the device switches off automatically after 15 minutes of inactivity (this function can be temporarily disabled). The current inputs are protected by tubular fuses, and the fuses can be tested without opening the device.
UT161E 1000 V True RMS Digital Multimeter.
Product specifications:
- fully complies with IEC/EN61010-1 and features CAT-III-0 double insulation
V-10 indoor electrical installation including three-phase distribution
- Classified as CAT IV 600V - outdoor electrical installation (safety components, start of indoor installation)
- HTN-type LCD display with a maximum reading of ± 22,000
- refresh rate for most measurements of 3 times per second
- Automatic or manual setting ranges
- Automatic polarity indication
- AC voltage measurement ranges: V / 21000 mV / 21/2000 mV Ranges: 220 μA / 20 A
- DC voltage measurement ranges: 220 mV / 1000 V
- DC current measurement ranges: 220 μA / 20 A
- Resistance measurement ranges: 220 mV / 200 V
- Capacitance measurement ranges: 220 Ω / 20 A / 220 mF
- Frequency measurement range: 10 Hz / 220 MHz
- Measurement of transistor gain (β)
- Measurement of silicon diode transitions
- Line continuity measurement
- Non-contact voltage detection (NCV)
- High accuracy of TRMS effective voltage measurement, voltage and current
- Relative measurement mode
- MAX/MIN mode
- Over-range warning: OL
- VFC anti-interference filter
- USB cable for transferring measured values to a PC
- software can be downloaded from the manufacturer’s website: https://meters.uni-series/161/products/series/#61 input protection against overvoltage exceeding 1000V
- Input current protection (μA and mA) with FF600 mA H 1000 V fast-acting fuse, ø6 x 32 mm CE
- Input current protection via FF11A / 1000V fast-acting fuse, ø10 x 38mm CE
- 1GΩ, 10MΩ in other voltage ranges,
- testing of diodes and semiconductor junctions with voltage from 0 to 3V, test current 1.2mA
- powered by 4 x 1.5V AAA R03 batteries
- low battery indicator
- automatic shut-off after 15 minutes of Bluetooth data transfer
- optional adapter for PC
to PC
- measurement possible in electromagnetic fields with an intensity of 1 V/m with an additional error of 5%
Technical parameters:
(accuracy is defined at a temperature of 23°C ± 5°C and relative humidity less than or equal to 75%)
- DC voltage measurement (input range is approx. 1 mV/Ω for other ranges):
(range / resolution / accuracy)
220.00 mV / 0.01 mV / ± (0.1% + 5)
2.2000 V / 0.1 mV / ± (0.05 % + 5)
22.000 V / ± 5.0 mV / ± 5.0 mV / ± 0.1 mV / ± (0.05 % + 5) 220.00 V / 10 mV / ± (0.05 % + 5)
1000 V / 0.1 V / ± (0.1% + 5)
- AC voltage measurement (input impedance approx. 10 MΩ):
(range / resolution / accuracy 14 kHz / 10 MΩ) 1 kHz to 10 kHz / 40 Hz to 100 kHz (with LPF)
220.00 mV / 0.01 mV / ± (1.0 % + 10) / ± (1.5 % + 30) / unspecified
2,200 mV / ± 10 V / ± 10 V / ± 10 V / ± (1.5% + 30) / unspecified ± (1.2% + 50) / ± (1.2% + 50)
22,000 V / 1 mV / ± (0.8 % + 10) / ± (1.2 % + 50) / ± (1.8 % + 50)
220.00 V / ± 0.00 V / ± 0.0 mV / ± 10) / ± (1.8 % + 50) (2.0 % + 50) / ± (2.0 % + 50)
1000 V / 0.1 V / ± (1.2 % + 10) / ± (3.0 % + 50) / ± (3.0 % + 50)
- (in AC + DC voltage measurement) approx. range / resolution / accuracy ) accuracy in the range from 40 Hz to 500 Hz
2,2000 V / 0.1 mV / ± (1.8 % + 70)
22,000 V / 1 mV / ± (1.8 % + 70)
22,000 V / 1 mV / ± (1.8 % + 70)
22,000 V / ± 1.0 mV / ± 1.0 mV / ± 1.0 % 70)
1,000 V / 0.1 V / ± (4.0 % + 70)
Displays the true RMS value
- DC current measurement:
(range / resolution / accuracy)
220.00 μA / 0.01 μA / 0.01 μA / ± 1 μA,
2200.0 μA / 0.1 μA / ± (0.5 % + 10)
22,000 mA / 1 μA / ± (0.5% + 10)
220.00 mA / 10 μA / ± (0.5 % + 0/> 10 / 0.5 % + 10) (1.2 % + 50)
- AC current measurement:
(range / resolution / accuracy) accuracy in the range 40 Hz to 1 kHz / accuracy in the range 1 kHz to 10 kHz)
220.00 μA / μA / ± 0.0 % / ± 1 kHz ± (3 % + 50)
2200 μA / 0.1 μA / ± (0.8 % + 10) / ± (3 % + 50)
22 mA / 1 μA / ± (1.2 % + 10) / ± (3 % + 50) / ± (3 % + 50) / ± (3 % + 50)
22 mA / 1 μA / ± (1.2 % + 10) / ± (3 % + 50) / ± (3 % + 50)
/ 20 μA + 10) / ± (3 % + 50)
20 A / 1 mA / ± (1.2% + 10) / ± (3% + 50)
- Resistance measurement:
(range / resolution / accuracy)
220.00 Ω, / 0.00 Ω, % / ± 1 Ω
2.2000 kΩ / 0.1 Ω / ± (0.5 % + 10)
22,000 kΩ / 1 Ω / ± (0.5 % + 10)
220.00 kΩ / 10 Ω / ± (0.5 % + 10 Ω) /20/> 102 Ω /20/> ± (0.8 % + 10)
22,000 MΩ / 1 kΩ / ± (1.5 % + 10)
220.00 MΩ / 10 kΩ / ± (3.0 % + 50)
- Capacitance measurement:
02, resolution 02,
02 nF / 1 pF / ± (3.0 % + 5)
220.00 nF / 10 pF / ± (3.0 % + 5)
2.2000 μF / 100 pF / ± (3.0% + 5)
22,000 μF / ± 5.0 %
220.00 μF / 10 nF / ± (40 % + 5)
2.2000 mF / 100 nF / ± (40 % + 5)
22,000 mF / 1 μF / ± (10 % + 5)
220 μF / ±0 % (0 μF / ± 0 % 5)
- Measurement of diodes and semiconductor junctions:
the measured value is between 0.12 and 2 V and the green LED is lit: the diode is OK,
the measured value is less than 0.12 V and the red LED is lit: the diode may be damaged at the silicon junction; 0.500 to 0.800 mV
voltage resolution during this measurement: 0.001 V
- Circuit continuity measurement:
when the line resistance is ≥70 Ω, an open circuit is indicated, the buzzer does not beep, and the red indicator light is on
0 Ω the resistance circuit is unbroken. is indicated, the buzzer sounds continuously and the green indicator light is on
Overload protection: 1000 V
Resistance resolution for this measurement: 0.1 Ω
- Frequency measurement, operating range:
(range / resolution / accuracy)
10 Hz / 1 MHz to 20 MHz, 10 Hz / 20 MHz ± 0.01% + 5
0.1% to 99.9% / 0.1% / ± (2.0% + 5)
General specifications:
- Operating temperature: 0 °C – 40 °C (32 °F – 104 °F) at relative humidity
- humidity ≤ 30% at 0 °C; ≤50% at 30°C - 40°C
- storage temperature: -10°C - 50°C (14°F - 122°F)
- Operating altitude: ≤2000 m
- Electromagnetic compatibility: complies with EN61326-1: 2006 standards
- dimensions: 186 mm × 89 mm × 49 mm
- Weight: 400 g
- The device complies with the following standards:
cETLus, CAT III 1000V, CAT IV 600V, double insulation, overload protection for voltages greater than 102>1000V
1000V; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
Compliant with UL STD: 61010-1, 61010-2-030
Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
Package contents:
- UT161E multimeter with storage case
- Gold-plated CAT III test leads / CAT IV 60V / 100/100V adapter plug - Plug for measuring transistors
- USB cable for data transfer to PC
- Fuse F1: 6 x 32 mm FF 600mA H 1000 V (ø6 x 32mm) CE - in device
- Fuse F2: 6 x 25 mm FF 11A H 1000 V in device
/CE - ø6 x 32 mm) AAA batteries, R03 1.5V
- Manual in Czech, Slovak, English
Wholesale packaging:
- standard quantity per box: 20 pcs
- standard box dimensions: 480 mm x 370 mm x 325 mm
- Total box weight: 8 kg
- UNI-TREND
-
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT161D Multimeter
This product comes with a 3-year warranty. The UT161 series of multimeters is a range of extremely reliable, safe, durable and accurate multimeters that are CE-certified and suitable for the European market. The displays on these multimeters are backlit LCDs (dark digits on a light background) with a resolution of ±6000 (for the UT161B and UT161D) and ±22000 for the UT161E. The displays have a refresh rate of 2–3 times per second and also feature an analogue bar graph with 31 segments (UT161B and UT161D) or 41 segments (UT161E). The multimeters measure AC and DC voltages up to 1000V and are equipped with an audible and visual warning when maximum voltage/current or temperature values are reached. They allow for non-contact detection of live AC wires. The package includes a USB cable with an opto-electronic converter for data transfer to a PC. The power supply consists of four AAA (R03) batteries, and the device switches off automatically after 15 minutes of inactivity (this function can be temporarily disabled). The current inputs are protected by tubular fuses, which can be tested with this device without opening them.
UT161D True RMS 1000 V Digital Multimeter.
Product specifications:
- Fully complies with IEC/EN61010-1 and features double internal insulation
- included in the CAT IV 600V category – outdoor electrical installation (fuse elements, start of internal installation)
- HTN-type LCD display with a maximum reading of ± 6000
- refresh rate for most measurements of 3 times per second
- Automatic or manual setting ranges
- Automatic polarity indication
- AC voltage measurement ranges: 60>-0V AC
Ranges: 600 μA / 20 A
- DC voltage measurement ranges: 60 mV / 1000 V
- DC current measurement ranges: 600 μA / 20 A
- LoZ V~ function – low input impedance measurement (approx. resistance: 600 Ω / 60 MΩ
- Capacitance measurement range: 60 nF / 66 mF
- Measurement frequency range: 10 Hz / 10.00 MHz
- Duty cycle measurement range: 0.1% to 99.9%
- 4000 °C to 4000 °C (1832 °F to 1832 °F), with supplied thermocouple up to 230 °C (446 °F)
- Measurement of silicon diode transitions
- Line continuity measurement
- Non-contact voltage detection (NCV)
- high accuracy
- TRMS, measurement of true RMS values of voltage, current and power
- Relative measurement mode
- MAX/MIN mode
- Overload warning: OL
- USB cable for transferring measured values to a PC
- Input protection against overvoltage exceeding 1000V
- μA and mA input current protection with m0 V 6100 ø 6100 V 32mm CE fast-acting fuse
- Input current protection 10A via FF11A / 1000V fast-acting fuse ø10 x 38mm CE
- Input impedance in the mV range approx. 1GΩ, in other voltage ranges 10MΩ,
- testing of diodes and semiconductor junctions with voltage from 0 to 3V, test current 1.2mA
- powered by 4 x 1.5V AAA R03 batteries
- low battery indicator
- automatic switch-off after 15 minutes of Bluetooth data transfer
- optional adapter for PC
to PC
- measurement possible in electromagnetic fields with an intensity of 1 V/m with an additional error of 5%
Technical parameters:
(accuracy is defined at a temperature of 23 °C ± 5 °C and relative humidity less than or equal to 75%)
- DC voltage measurement (input range is approximately 1MV, 1MΩ 0x0x.) for other ranges):
(range / resolution / accuracy)
60.00 mV / 0.01 mV / ± (0.8% + 5)
600.0 mV / 0.1 mV / ± (0.8 % + 3)
6,000 V / 5 / 0.01 V / ± 0.1 mV / ± (0.8 % + 3) 60.00 V / 0.01 V / ± (0.5 % + 3)
600.0 V / 0.1 V / ± (0.5 % + 3)
1,000 V / 1 V / ± (1.0 % + 3)
- (in AC input voltage measurement / Ω) range / resolution / accuracy in the range from 40 Hz to 1 kHz)
60.00 mV / 0.01 mV / ± (1.2 % + 5)
600.0 mV / 0.1 mV / ± (1.2 % + 5)
6.00 % + 3 V / 0.00 V / ± 0 V
60.00 V / 0.01 V / ± (1.0 % + 3)
600.0 V / 0.1 V / ± (1.0 % + 3)
1000 V / 1 V / ± (1.2 % + 5)
LoZ ACV / ± 0.0 % V / ± 0.0 V / ± 0.0 V / ± (1.2 % + 3) 5)
LoZ ACV 1000 V / 1 V / ± (2.0 % + 5)
Displays the true RMS value.
- DC measurement:
(range / resolution / accuracy)
600.0 μA / 0.1 μA / ± 1 μA,
μA / 1 μA / ± (1.0 % + 2)
60.00 mA / 10 μA / ± (1.0 % + 3)
600.0 mA / 0.1 mA / ± (1.0 % + 3)
6,000 A / ± 1.2 mA / ± 1.0 mA / ± A / 10 mA / ± (1.2 % + 5)
- AC current measurement:
(range / resolution / accuracy in the range from 40 Hz to 1 kHz)
600.0 μA / 0.1 μA / ± (1.2 % + μA / μA / ± 50 / μA / ± 1 kHz) (1.2 % + 5)
60.00 mA / 10 μA / ± (1.5 % + 5)
600.0 mA / 0.1 mA / ± (1.5 % + 5)
6,000 A / 1 mA / ± (2.0 % / ± 5 mA / ± 5)
(2.0% + 5)
Displays the true RMS value
- Resistance measurement:
(range / resolution / accuracy)
600.0 Ω / 0.1 Ω / ± (1.2 % + 2)
6,000 kΩ / ± 1.0 Ω / ± 1.0 Ω / ± 1.0 Ω / ± 1.0 Ω 60.00 kΩ / 10 Ω / ± (1.0 % + 2)
600.0 kΩ / 100 Ω / ± (1.0 % + 2)
6,000 MΩ / 1 kΩ / ± (1.2% + 2)
60.00 kΩ / ± 2 Ω / ± 2 Ω / 60.00 % + 2)
- Capacitance measurement:
(range / resolution / accuracy)
60.00 nF / 10 pF / ± (3.0 % + 5)
600.0 nF / 100 pF / ± (3.0 % + 5) / ± 6.0 pF / ± 10 pF / ± (3.0 % + 5) % + 5)
60.00 μF / 10 nF / ± (3.0% + 5)
600.0 μF / 100 nF / ± (3.0% + 5)
6,000 mF / 1 μF / ± (10 % + 5 μF / 0.0 % + 5) / μF / 0.0 % + 5) ± (10 % + 5)
- Frequency measurement:
(range / resolution / accuracy)
10 Hz to 10 MHz / 0.01 Hz to 0.01 MHz / ± 0.1% + 4
- Duty cycle measurement / 9.1 %/ to 9.1 % 0.1 % / ± (2.0 % + 5)
- Temperature measurement in the range -40 °C to 1000 °C (-40 °F to 1832 °F):
(range / resolution / accuracy)
-40 °C / ± 0 °C / ± 1% °C)
0 °C to 300 °C / 1 °C / ± (1.0% + 2 °C)
300 °C to 1000 °C / 1 °C / ± (1.0% + 3 °C)
(range / resolution / accuracy)
(range / resolution / accuracy)
± 3 °F / ± 3 °F (1.0% + 6 °F)
32 °F to 572 °F / ± (1.0% + 4 °F)
572 °F to 1832 °F / 2 °F / ± (1.0% + 6 °F)
With a type K thermocouple, the temperature should be measured at less than 20 °C (446 °F)
Conversion from °C to °F using the formula °F = 1.8 × °C + 32
- Measurement of diodes and semiconductor junctions:
if the measured value is between 0.12 and 2 V and the green LED is lit, the measured value is lower than 0.12 V and the red LED is lit: the diode may be damaged
the normal voltage drop across the silicon junction is 0.500 to 0.800 mV
Voltage resolution during this measurement: 0.001 V
- Circuit continuity measurement:
when the line is open, the resistance is ≥70 ohms, the buzzer does not beep and the red indicator light is on
when the line resistance is ≤50 Ω, an unbroken circuit is indicated, the buzzer emits a continuous beep and the green indicator light is on
Overload protection: 1000V
Resistance resolution for this measurement: 0.1 Ω
General operating specifications:
0°C – 40°C (32°F – 104°F)
- relative humidity: ≤75% at 0°C - 30°C; ≤ 50% at 30°C - 40°C
- Storage temperature: -10°C - 50°C (14°F - 122°F)
- Operating altitude: ≤2000 m
- Electromagnetic compatibility: complies with EN61326-1: 2006
- dimensions: 186 mm × 89 mm × 49 mm
- Weight: 400 g
- the device complies with the following standards:
cETLus, CAT III 1000V, CAT IV 600V, double insulation, overvoltage protection for voltages greater than 102>1000V
1000V; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
Compliant with UL STD: 61010-1, 61010-2-030
Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
Package contents:
- UT161D multimeter with storage case
- Gold-plated CAT III test leads / CAT IV 60V / 100/100V adapter plug - CAT IV 60V plug – for thermocouple connection
- Type K thermocouple
- USB cable for data transfer to PC
- Fuse F1: 6 x 32 mm FF 600mA H 1000 V (ø6 x 32mm) CE - in device
- Fuse F2: 6 x 25 mm FF 1001A in V8 mm (ø) x CE device
- 4 AAA batteries, R03 1.5 V
- manual in Czech, Slovak and English
Wholesale packaging:
- standard quantity per box: 20 pcs
- standard box dimensions: 480 mm x 370 mm x 325 mm total box weight
- 1 kg
- Manufacturer: UNI-TREND
-
