In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT PROavr-60k three-phase servo motor stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT PROavr-60k automatic voltage stabiliser.
Protect your devices against power surges
In single-phase mode, each phase can operate independently of the others. Regardless of the mains load and fluctuations in the output voltage, the KEMOT PROavr-60k stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Regulation is automatic, ensuring high precision of the output voltage. A fault in the operation of one phase does not affect the operation of the others.
Three-phase mode
In three-phase mode, it is important to maintain balance between the phases. The stabiliser monitors and controls the voltage on each phase to ensure consistency between them – it will compensate for an input voltage that is too high or too low and supply the output voltage once stabilised. If, in this mode, one of the phases is not functioning properly or is not connected, the unit will activate the protection circuit and will not supply output voltage, indicating this via the ‘PHASE ERROR’ indicator light.
Servo-driven voltage stabiliser
The KEMOT PROavr-60k voltage stabiliser maintains voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
BYPASS switch
The device is also equipped with a “bypass” function, i.e. a switch that bypasses the stabiliser’s operation, allowing it to be isolated and enabling the home network to be powered without issues from an external source.
DELAY Function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT PROavr-60k is equipped with a DELAY switch button that ranges from 6 to 180 seconds, which will reduce the risk of damage to the stabiliser when devices connected to it have a high inrush current. In addition, the KEMOT PROavr-60k stabiliser features protection against overvoltage and undervoltage, overload, overheating and short circuits.
>Easy transport
To make it easier to move and position the KEMOT stabiliser in the right place, it is fitted with four sturdy wheels. Thanks to these, you can easily transport the device to different locations, which will certainly make operation and maintenance easier.
Usage
The KEMOT PROavr-60k can be used both at home and in the office. It is perfect for:
televisions and audio/video equipment;
speakers, mini audio systems and other audio/video devices;
household appliances such as induction hobs, microwaves, fridges and freezers;
computers, monitors, printers, cash registers and other office equipment;
ovens and central heating pumps;
power generators.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Busbars are essential solutions for high-current distribution, ensuring secure connections for batteries and DC equipment. Available in various current ratings and with a range of connection terminals, these busbars are designed to meet the specific requirements of electrical systems. Each busbar is fitted with a removable protective cover, providing an additional level of safety and protection for the connections.
Technical Specifications:
Maximum current: 600 A
Maximum voltage: 70 VDC
Terminal material: Stainless steel
Recommended torque: 20 N·m
Weight: 0.75 kg
Dimensions (HxWxD) with cover: 65 x 216 x 86 mm
This busbar is ideal for industrial, commercial or residential applications requiring reliable and efficient distribution of electrical current.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Busbars are essential components for high-current distribution, facilitating secure connections for batteries and DC equipment. These busbars are available in various current ratings and offer a variable number of connection terminals. Each busbar comes fitted with a removable protective cover to safeguard the connections and ensure safe operation.
Technical Specifications:
Maximum current: 600 A
Maximum voltage: 70 VDC
Terminal material: Stainless steel
Recommended torque: 20 N·m
Weight: 1.3 kg
Dimensions (HxWxD) with cover: 65 x 327 x 86 mm
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The V-TAC 600W / 512Wh portable power station is a compact and efficient solution for powering electrical devices in any situation, whether you’re camping, working in the field or needing a backup during a power cut.
Equipped with a state-of-the-art LiFePO4 battery, it offers an extended lifespan of up to 3,000 cycles and superior stability compared to conventional batteries. The 512Wh capacity and 600W power output (with a peak of 1000W) allow it to power a wide range of equipment – from phones and laptops to small electrical appliances.
The station can be fast-charged from multiple sources: the 230V mains, solar panels or directly from a car, offering maximum flexibility. Furthermore, Wi-Fi integration enables smart monitoring and control of consumption.
Its compact design and low weight (~7 kg) make it easy to carry, making it ideal for mobile use or off-grid applications.
Key features
Rated power: 600W (peak 1000W)
Battery capacity: 512Wh
Technology: LiFePO4 (high safety + long service life)
Solar charging: up to 200W (MPPT)
2 pure sine wave AC sockets
USB-C up to 100W (fast charging)
Car + multiple DC outputs
Wi-Fi control
Integrated LED torch
General information
Product type
Portable power station
Battery technology
LiFePO4
Capacity
512Wh – 576Wh
Cycle life
up to 2000–3000 cycles
Performance
Rated power
600W
Maximum power
1000W (peak)
Waveform
Pure sine wave
Charging
AC charging
24V / ~4.2A adapter
Solar charging
12–24V, max. 120–200W
Car charging
12V
Outputs
AC sockets
230V (pure sine wave)
USB-A
QC 3.0
USB-C
PD 18W / 65W
DC
12V (up to 8–10A)
Wireless
15W
Others
Features
Wi-Fi, LED torch, SOS mode
Protections
Overcurrent, overvoltage, temperature, short circuit
Dimensions
approx. 295 × 206 × 228 mm
Weight
~7.5 – 7.8 kg
✅ High-quality LiFePO4 cells (up to 3,000 cycles)
✅ DC charging from solar panels or a car (12V, up to 200W)
✅ 12V car socket (cigarette lighter) output up to 10A
✅ 2x USB-C ports up to 100W (fast charge)
✅ 600W pure sine wave AC sockets (1000W peak)
✅ LED torch with SOS mode and built-in Wi-Fi
Download the technical data sheet
Download the manual
Download the declaration of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The VT-606N portable power station from V-TAC is a compact and robust power unit, designed to provide a reliable and versatile 600W power supply, with a peak output of 1000W. It is ideal for a variety of uses, from powering electronic devices and equipment whilst travelling, camping and during outdoor activities, to serving as a backup power source in the event of an emergency or power cut.
Equipped with a modern LiFePO4 battery, the VT-606N has a capacity of 576Wh, ensuring long operating time and increased reliability with up to 2000 charge/discharge cycles. It offers a variety of charging options, including:
- A DC 7909 charging port for an adapter (24V/4.2A), vehicle charging (12V) and solar charging (12–24V with a maximum of 120W);
- Two DC 5521 output ports and an auxiliary car socket (total 12V/8A);
- A fast charger with a USB-A QC 3.0 port and two TYPE-C output ports (PD18W and PD65W), enabling fast and efficient charging of a wide range of devices.
One of the most notable advantages of the VT-606N power station is the availability of two standard EU/BS AC sockets, capable of delivering 600W of pure sine wave AC output (with a peak of 1000W), facilitating the simultaneous powering of multiple electrical devices.
For emergencies or lighting needs, the unit is equipped with a multi-mode LED torch, including high beam, low beam, SOS and flash modes. The device operates surprisingly quietly, making it suitable for use in any environment without causing disturbance.
In addition to its power supply and lighting features, the VT-606N is built for safety, with protection against overloading, overvoltage, overheating and short circuits. Its compact design (295*206*228.5mm) and weight of 7.8 kg make it easy to carry and store, making it a reliable companion for outdoor adventures, remote working or emergencies at home.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 60A, 58V MIDI fuse is specifically designed to protect 48V electrical equipment against overloads and short circuits. This individual fuse is ideal for applications requiring safe and reliable protection in DC systems, offering a high level of protection and durability.
Rated current: 60A
Maximum voltage: 58V
Fuse type: MIDI
Compatibility: 48V products
Package: 1 piece
Perfect for renewable energy systems and other applications operating at high voltages, this MIDI fuse is essential for the optimal protection of electrical devices.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Trina Solar 610W bifacial N-Type I-TOPCon photovoltaic panel is designed for large-scale photovoltaic projects, where maximum power per panel, durability and long-term efficiency are essential. Thanks to bifacial technology and N-Type I-TOPCon cells, the panel harnesses both direct and reflected solar radiation, offering superior performance compared to standard panels.
The 2.0 mm double-glazed construction and robust anodised aluminium frame make it ideal for commercial and industrial applications, including ground-mounted installations.
Technical data
Maximum power (Pmax): 610 W
Current at maximum power (Imp): 15.33 A
Short-circuit current (Isc): 16.14 A
Voltage at maximum power (Vmp): 39.79 V
Open-circuit voltage (Voc): 48.08 V
Construction
Cell type: N-Type I-TOPCon Monocrystalline, bifacial
Number of cells: 132
Front glass: 2.0 mm AR-coated heat-strengthened glass
Rear glass: 2.0 mm heat-strengthened glass (white coating)
Frame: Anodised aluminium alloy, 30 mm
Protection rating: IP68
Advantages / Benefits
Bifacial technology – additional energy production from the rear
High power output of 610W, ideal for large-scale projects
N-Type I-TOPCon cells with low degradation over time
2.0 mm double-glazed glass for enhanced mechanical strength and durability
Stable performance in extreme temperature conditions
Suitable for commercial, industrial and solar farm installations
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The V-TAC 614Wh battery extension is designed to increase the runtime of portable power stations, offering an efficient and scalable solution for users who need more power for off-grid, camping or backup applications.
Equipped with LiFePO4 cells, this battery ensures an extended service life, high safety and stable performance over time. With a nominal voltage of 51.2V and a capacity of 614Wh, the product is ideal for expanding existing systems without compromising efficiency or reliability.
Its compact design and simple connection system allow for quick integration into existing setups, making it a practical choice for users seeking flexibility and increased autonomy.
General information
Product type
Battery extension for portable stations
Battery technology
LiFePO4
Capacity
614Wh
Nominal voltage
51.2V
Performance
Lifespan
>2000 cycles
Stability
High (integrated BMS)
Operating conditions
Humidity
10% – 85% (non-condensing)
Protection rating
IP20
Other
Compatibility
V-TAC portable stations
Usage
Extended battery life
Recommended applications
Camping, caravans, van life
Powering small and medium-sized electrical equipment
Backup in the event of a power cut
Field work / construction sites
Use in households or areas without mains access
✅ High-quality LiFePO4 cells (long service life)
✅ 614Wh capacity – extends the runtime of portable power stations
✅ Nominal voltage 51.2V for optimal compatibility
✅ Compact design, easy to integrate
✅ Quick and secure connection
✅ Ideal solution for off-grid power expansion
Download the technical data sheet
Download the manual
Download the declaration of conformity
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This digital multimeter with an LCD display is suitable for both domestic use and professionals in the electrical engineering industry.
It is used to measure alternating and direct current, alternating and direct voltage, and resistance.
Features:
- Product material: ABS
- Cable material: PVC / brass
- Display: 6000 (MAX) readings
- Auto-off: after 10 minutes
- Battery type: 2xAAA (not included)
- AC voltage: 0–600 V
- DC voltage: 0–600 V
- AC current: 0–10A
- DC current: 0–10A
- Capacitance: 6nF–60mF
- Resistance: 0–60 milliohms
- Frequency: 0–10 MHz
- Automatic identification and measurement based on different input voltages / current / resistance etc.
- Stable performance, high accuracy and clear readout
- Also features a convenient flashlight test function
- Product dimensions: 137.4 x 68.4 x 14.5 mm
- Total lead length: 100 cm
- Weight: 105 grams
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download the datasheet
Sales and delivery conditions
⚠️ For orders requiring delivery, the panels are sold exclusively by full pallet of 31 units.
For orders collected directly from the SolarTech warehouse, the panels can also be purchased individually.
The Osda 620W N-Type Bifacial Photovoltaic Panel is designed for photovoltaic installations requiring high power output while making efficient use of the available installation area. The model uses 132 monocrystalline N-Type cells and achieves an efficiency of 22.96%.
Bifacial technology enables the panel to capture light through both its front and rear sides. When installed above a light-reflective surface, such as light-coloured gravel, a white membrane, or concrete, the panel can also use the solar radiation reaching its rear side.
Under the BNPI conditions specified in the datasheet, with front-side irradiance of 1,000W/m² and rear-side irradiance of 135W/m², the resulting output can reach 687W. This value represents a standardised bifacial testing condition and is not the panel’s rated STC output.
The dual-glass construction uses 2mm tempered front glass with an anti-reflective coating and 2mm rear glass. This structure provides protection for the cells and is suitable for residential, commercial, and industrial photovoltaic installations.
Main features
Rated output of 620W under STC conditions
Monocrystalline N-Type cells
132 cells in a 12 × 11 configuration
Bifacial technology with a bifaciality rate of 80% ± 5%
High efficiency of 22.96%
Good performance under low-light conditions
Low LID/LeTID degradation
Bifacial dual-glass construction
Silver anodised aluminium alloy frame
IP68 junction box with three bypass diodes
Maximum system voltage of 1,500V
Mechanical resistance of 5,400Pa for snow loads and 2,400Pa for wind loads
Pmax temperature coefficient of -0.290%/°C
Advantages
More energy from the same area
The 620W output and 22.96% efficiency enable the development of photovoltaic installations with a high power density.
Power generation on both sides
The rear side can convert reflected light into electricity when the installation conditions and the surface beneath the panel support bifacial energy capture.
Good performance at high temperatures
The Pmax temperature coefficient of -0.290%/°C limits power losses when the cell temperature increases.
Improved low-light performance
N-Type technology contributes to energy production during periods of lower irradiance, such as in the morning and evening.
Robust construction
The dual-glass structure, anodised aluminium frame, and IP68 junction box protect the module’s components under normal installation and operating conditions.
Recommended applications
Residential photovoltaic systems
Commercial and industrial buildings
Rooftop installations
Ground-mounted systems
Photovoltaic carports
Projects where reflected light can be captured through the rear side
Electrical specifications – STC
Specification
Value
Reference model
ODA620-33V-MHDRz
Rated power Pmax
620W
Voltage at maximum power Vmp
41.46V
Current at maximum power Imp
14.96A
Open-circuit voltage Voc
48.78V ± 3%
Short-circuit current Isc
15.89A ± 3%
Module efficiency
22.96%
Bifacial performance – BNPI
Specification
Value
Resulting maximum power
687W
Voltage Vmp
41.59V
Current Imp
16.53A
Voltage Voc
48.93V ± 3%
Current Isc
17.56A ± 3%
BNPI values measured at front-side irradiance of 1,000W/m² and rear-side irradiance of 135W/m².
Construction characteristics
Specification
Value
Cell type
Monocrystalline N-Type, 182 × 105mm
Number of cells
132, 12 × 11 configuration
Dimensions
2,382 × 1,134 × 30mm
Weight
32.40kg
Front glass
2mm, tempered, with anti-reflective coating
Rear glass
2mm, glazed glass
Frame
Silver anodised aluminium alloy
Junction box
IP68, 1,500VDC, 3 Schottky bypass diodes
Cables
4mm², positive 300mm and negative 300mm
Connectors
IP68
Operating parameters
Specification
Value
Maximum system voltage
1,500V
Operating temperature
-40°C to +85°C
Maximum series fuse rating
28A
NMOT
45°C ± 2°C
Snow/wind load
5,400Pa / 2,400Pa
Protection class
Class II
IEC fire rating
Class A
Temperature coefficients
Specification
Value
Pmax coefficient
-0.290%/°C
Voc coefficient
-0.250%/°C
Isc coefficient
+0.045%/°C
Packaging
Specification
Value
Panels per pallet
31 units
Technical warning
The additional output generated through the rear side depends on the surface beneath the panel, its reflectivity, the installation height and angle, the spacing between rows, and the irradiance conditions.
String sizing must take into account the panel’s voltage and current ratings, the inverter’s limits, and the minimum and maximum temperatures at the installation site.
Installation, configuration, and commissioning must be carried out by qualified personnel in accordance with the manufacturer’s instructions and applicable regulations.
Warranty and standards
The datasheet specifies:
15-year product warranty
30-year performance warranty
Guaranteed output of 87.4% at the end of the 30-year period
The following standards are mentioned: IEC 61215:2021, IEC 61730:2023, IEC 61701, IEC 62716, IEC 60068, and IEC 62804.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The AIKO 645W photovoltaic panel from the Stellar 1N+ series is a premium solution for residential, commercial and industrial photovoltaic systems, designed for high performance, excellent efficiency and optimised energy production in all operating conditions. N-Type ABC technology and the bifacial dual-glass construction allow energy to be captured on both the front and rear sides of the panel, increasing the overall efficiency of the photovoltaic system.
With a power output of 645W and an efficiency of up to 23.9%, this model is ideal for projects where available space must be utilised to the full. The modern full-black design and advanced AIKO technology offer a premium look and stable long-term performance.
The panel is constructed with 2.0+2.0 mm double semi-tempered glass and an anodised aluminium frame, offering excellent resistance to harsh weather conditions, micro-cracks and high temperatures.
General specifications
Brand
AIKO
Model
AIKO-G645-MCH72Dw
Maximum power (Pmax)
645W
Module efficiency
23.9%
Cell technology
N-Type ABC
Panel type
Bifacial Dual-Glass
Electrical characteristics (STC)
Open-circuit voltage (Voc)
53.90V
Maximum power voltage (Vmp)
45.20V
Short-circuit current (Isc)
15.00A
Current at maximum power (Imp)
14.27A
Construction and dimensions
Dimensions
2382 × 1134 × 30 mm
Weight
32.3 kg
Number of cells
144 (6×24)
Glass
Dual glass 2.0+2.0 mm semi-tempered
Frame
Anodised aluminium
Junction box protection rating
IP68
Connectors
MC4 Compatible / MC4-EVO2A
Rating and operation
Operating temperature
-40°C to +70°C
Maximum system voltage
DC1500V
Frontal mechanical load
5400Pa
Rear mechanical load
2400Pa
Protection class
Class II
Warranties
Product warranty
15 years
Performance warranty
30 years
Deterioration in the first year
≤1%
Annual degradation years 2–30
≤0.35%
Product advantages
High energy yield thanks to bifacial technology
Excellent performance even in partial shade
Low losses at high temperatures
Long-term stability and durability
Ideal for commercial and industrial projects
Low BOS costs thanks to high power per panel
Premium, modern appearance
✅ Rated power 645W✅ State-of-the-art N-Type ABC technology✅ Dual-glass bifacial panel✅ High efficiency of 23.9%✅ Low annual degradation ≤0.35%✅ Enhanced resistance to high temperatures✅ Protection against microcracks
Download the technical data sheet
Download the manual
Download the declaration of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This digital multimeter with an LCD display is suitable for both domestic use and professionals in the electrical engineering industry.
It is used to measure alternating and direct current, alternating and direct voltage, and resistance.
Specifications:
AC Voltage: 0–750 V
DC Voltage: 0–1000 V
AC Current: 0mA–10A
DC Current: 0mA–10A
Resistance: 0Ω–60MΩ
Capacitance: 0nF–100mF
Temperature: -40–1000°C / -40–1832°F
Hz: Yes
Diode: Yes
On-Off: Yes
Buzzer: Yes
Live: Yes
Flashlight: Yes
NCV Sensing: Yes
Automatic Shutdown: Yes
Data Hold: Yes
Colour: Black / Red (Optional)
Material: ABS + silicone
Max. Count: 6000 counts
Display: VA reverse display screen
Built-in Battery: 3.7V 2800mAh lithium battery
Item Size: 152 × 76 × 25 mm / 5.98 × 2.99 × 0.98 in
Item Weight: 217g / 7.65oz
Package Weight: 472g / 16.23oz
Package Size: 20.6 × 11 × 5.5cm / 8.11 × 4.33 × 2.17in
Contents:
1 * Multimeter
1 * Temperature probe
1 * Charging cable
1 * + / - cables
1 * Zip-up case
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Hiconics 6kW inverter + 10kWh storage system, model HEC2-S6.0Hr2, is a high-performance solution for efficient electricity management, suitable for both residential and commercial use. This all-in-one system is ideal for those who wish to reduce their dependence on the grid and ensure a reliable and sustainable energy supply.
Key Features:
All-in-One Design: The system includes a 6kW single-phase hybrid inverter and a 10kWh high-voltage battery, offering a compact and efficient solution for energy storage and management.
Easy Control: The system can be easily managed via a mobile app, PC interface or touchscreen display, offering maximum flexibility to users.
Smart Applications: Advanced features such as load management, peak shaving and AC coupling optimise energy usage and reduce costs.
Safe and Efficient Battery: The LiFePO4 battery is designed for a long service life and high performance, with a cycle life of 6,000 cycles.
Quick Installation: The modular design allows for quick and efficient installation, without the need for additional cables or fixing screws.
Uninterrupted Power Supply: A fast switching time of just 4 ms ensures a stable and safe power supply even during power cuts.
Technical Specifications:
Rated Output Power / UPS Power: 6000 W
AC output frequency and voltage: 50 Hz; 230 VAC (single-phase)
Battery operating voltage: 225–400 V
Enclosure IP rating: IP65, ensuring maximum protection against dust and water
System certifications: IEC62619, IEC60730, CE, VDE2510-50, IEC 0-21
Maximum efficiency: 97.6% (PV-BAT), 96.0% (BAT-AC)
Warranty: 10 years
Installation:
The Hiconics 6kW Inverter + 10kWh Storage system is designed to facilitate quick and efficient installation. Its modular and stackable design allows for direct floor mounting, eliminating the need for additional cables or fixing screws. This simplifies the installation process and reduces the time required for implementation.
Benefits:
This Hiconics All-in-One energy storage system is ideal for those who wish to optimise energy consumption, reduce grid dependency and ensure a reliable energy supply. Its advanced features, easy installation and user-friendly control options make this system a top-of-the-range solution on the market. By investing in the Hiconics All-in-One energy storage system, you will take control of your energy future, ensuring a stable and efficient energy supply.
Further details:
Operating temperature: -20°C to 55°C, with an integrated internal temperature control system.
Depth of discharge (DoD): 90%
User interface: LED, mobile app
Communication methods: RS485/CAN, Wi-Fi
Noise level: <40 dB
Dimensions: 800 x 450 x 160 mm
Weight: 34 kg
Certifications: EN50549-1 , G99, G98, CEI021, VDE4105, AS4777.2
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The STREND PRO VDE screwdriver set, comprising 8 pieces, is specially designed for safe and precise electrical work. The screwdrivers are VDE-insulated, providing protection when working on live circuits up to 1000 V.
Key features:
Set of 8 screwdrivers for electricians
VDE insulation, for live work up to 1000 V
Includes flat and Phillips screwdrivers
Ergonomic handles for a comfortable grip and precise control
Made from durable and robust materials
High reliability and long service life
Suitable for professional and DIY use
Benefits:
Enhanced safety during electrical work
Comfort during prolonged use
Precision and control in every job
Ideal for professional electricians and advanced DIY enthusiasts
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT PROavr-80k three-phase servo motor stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT PROavr-80k automatic voltage stabiliser.
Protect your devices against power surges
In single-phase mode, each phase can operate independently of the others. Regardless of the mains load and fluctuations in the output voltage, the KEMOT PROavr-80k stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Regulation is automatic, ensuring high precision of the output voltage. A fault in the operation of one phase does not affect the operation of the others.
Three-phase mode
In three-phase mode, it is important to maintain balance between the phases. The stabiliser monitors and controls the voltage on each phase to ensure consistency between them – it will compensate for an input voltage that is too high or too low and supply the output voltage once stabilised. If, in this mode, one of the phases is not functioning properly or is not connected, the unit will activate the protection circuit and will not supply output voltage, indicating this via the ‘PHASE ERROR’ indicator light.
Servo-driven voltage stabiliser
The KEMOT PROavr-80k voltage stabiliser maintains voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
BYPASS switch
The device is also equipped with a ‘bypass’ function, i.e. a switch that bypasses the stabiliser’s operation, allowing it to be isolated and enabling the home network to be powered without issues from an external source.
DELAY Function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT PROavr-80k is equipped with a DELAY switch button that ranges from 6 to 180 seconds, which will reduce the risk of damage to the stabiliser when devices connected to it have a high inrush current. In addition, the KEMOT PROavr-80k stabiliser features protection against overvoltage and undervoltage, overload, overheating and short circuits.
Easy transport
To make it easier to move and position the KEMOT stabiliser in the right place, it is fitted with four sturdy wheels. Thanks to these, you can easily transport the device to different locations, which will certainly make operation and maintenance easier.
Usage
The KEMOT PROavr-80k can be used both at home and in the office. It is perfect for:
televisions and audio/video equipment;
speakers, mini audio systems and other audio/video devices;
household appliances such as induction hobs, microwave ovens, fridges and freezers;
computers, monitors, printers, cash registers and other office equipment;
ovens and central heating pumps;
power generators.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
https://solartech.ro/wp-content/uploads/2022/11/Tester-panouri-fotovoltaice-Elejoy-EY800W-Video.mp4
Features:
Automatic MPPT detection: When you press the AUTO MPPT test button, the instrument automatically adjusts the test time interval according to the current power value and refreshes the digital display. For example, when the solar panel power is 100 W, it refreshes once every 5 seconds.
Manual MPPT detection: When you press the manual MPPT test button, the instrument initiates a scan for the maximum power point and refreshes the digital display.
Real-time open-circuit voltage display: The open-circuit voltage will be displayed on the LCD screen at all times.
Large backlit LCD screen: The updated screen features a large backlit LCD; you can turn the screen on or off as required.
Multiple protection: Overvoltage protection, overtemperature protection, overcurrent protection.
Specifications:
Material: ABS
Model: EY800W
Voltage: 12–60V
Power: EY800W: 5–800W
Current: EY800W: 0–35A
Item dimensions: 165 * 80 * 30mm
Item weight: 470g
Package dimensions: 250 * 130 * 65mm
Package weight: 500g
Package contents:
1 * Solar panel multimeter
1 * Connection cable
1 * Alligator clip cable
1 * Tool kit
1 * User manual
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 80A, 58V MIDI fuse is specifically designed to protect 48V electrical equipment against overloads and short circuits. This individual fuse is ideal for applications requiring safe and reliable protection in DC systems, offering a high level of protection and durability.
Rated current: 80A
Maximum voltage: 58V
Fuse type: MIDI
Compatibility: 48V products
Package: 1 piece
Perfect for renewable energy systems and other applications operating at high voltages, this MIDI fuse is essential for the optimal protection of electrical devices.
