In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Trina Solar Vertex S+ 445W photovoltaic panel utilises advanced N-Type i-TOPCon technology, delivering high efficiency and excellent performance in all conditions. Thanks to its bifacial double-glass construction, it enables additional energy generation from the rear side, increasing the system’s overall output.
With an efficiency of up to 22.5% and an extended lifespan, this model is ideal for both residential and commercial applications.
Advantages and benefits
✔️ Higher energy outputBifacial technology allows for the capture of reflected light, offering superior efficiency compared to conventional systems.
✔️ Excellent performance in low-light conditionsHigh efficiency even in the morning, evening or on cloudy days.
✔️ Extreme durabilityThe double-glass construction reduces the risk of micro-cracks and degradation.
✔️ Low temperature coefficient (-0.29%/°C)Lower performance losses at high temperatures.
✔️ Wide compatibilityWorks perfectly with most inverters and mounting systems.
General information
Model
TSM-NEG9RC.27
Manufacturer
Trina Solar
Technology
N-Type i-TOPCon Monocrystalline
Panel type
Bifacial, Dual Glass
Number of cells
144
Electrical data (STC)
Maximum power (Pmax)
445 W
Voltage at maximum power (Vmpp)
44.3 V
Current at maximum power (Impp)
10.05 A
Open-circuit voltage (Voc)
52.6 V
Short-circuit current (Isc)
10.71 A
Module efficiency
22.3%
Electrical data (NOCT)
Power
341 W
Vmpp voltage
41.7 V
Current Impp
8.17 A
Bifacial performance (BNPI)
Maximum power
493 W
Backside gain
5% – 10%
Thermal data
NOCT
43°C ±2°C
Temperature coefficient Pmax
-0.29% / °C
Voc coefficient
-0.24% / °C
Isc coefficient
+0.04% / °C
Mechanical data
Dimensions
1762 × 1134 × 30 mm
Weight
21 kg
Front glass
1.6 mm, heat-treated
Rear glass
1.6 mm
Frame
Anodised aluminium
Protection rating
IP68
Operating specifications
Maximum system voltage
1500V DC
Maximum fuse rating
25 A
Operating temperature
-40°C to +85°C
Packaging
Pieces per pallet
36
Pieces per container
936
✅Rated power: 445W (STC)
✅Technology: N-Type i-TOPCon
✅Bifacial module – up to +20% extra energy
✅High efficiency: up to 22.5%
✅Glass-glass structure for maximum durability
✅Warranty: 25 years product / 30 years performance
Download the technical data sheet
Download manual
Download the declaration of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT PROavr-45k three-phase servo motor stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT PROavr-45k automatic voltage stabiliser.
Protect your devices against power surges
In single-phase mode, each phase can operate independently of the others. Regardless of the mains load and fluctuations in the output voltage, the KEMOT PROavr-45k stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Regulation is automatic, ensuring high precision of the output voltage. A fault in the operation of one of the phases does not affect the operation of the others.
Three-phase mode
In three-phase mode, it is important to maintain balance between the phases. The stabiliser monitors and controls the voltage on each phase to ensure consistency between them – it will compensate for an input voltage that is too high or too low and will supply the output voltage once stabilised. If, in this mode, one of the phases is not functioning properly or is not connected, the unit will activate the protection circuit and will not supply output voltage, indicating this via the ‘PHASE ERROR’ indicator light.
Servo-driven voltage stabiliser
The KEMOT PROavr-45k voltage stabiliser maintains voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
BYPASS switch
The device is also equipped with a ‘bypass’ function, i.e. a switch that bypasses the stabiliser’s operation, allowing it to be isolated and enabling the home network to be powered without issues from an external source.
DELAY Function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT PROavr-45k is equipped with a DELAY switch button that ranges from 6 to 180 seconds, which will reduce the risk of damage to the stabiliser when devices connected to it have a high inrush current. In addition, the KEMOT PROavr-45k stabiliser features protection against overvoltage and undervoltage, overload, overheating and short circuits.
>Easy transport
To make it easier to move and position the KEMOT stabiliser in the right place, it is fitted with four sturdy wheels. Thanks to these, you can easily transport the device to different locations, which will certainly make operation and maintenance easier.
Usage
The KEMOT PROavr-45k can be used both at home and in the office. It is perfect for:
televisions and audio/video equipment;
speakers, mini audio systems and other audio/video devices;
household appliances such as induction hobs, microwaves, fridges and freezers;
computers, monitors, printers, cash registers and other office equipment;
ovens and central heating pumps;
power generators.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Trina Solar 455W N-Type I-TOPCon photovoltaic panel is a high-performance and reliable solution for residential, commercial and industrial photovoltaic systems. Thanks to N-Type I-TOPCon technology and its double-glass construction, this panel offers high efficiency, low degradation over time and an extended service life.
Built to withstand harsh environmental conditions, the panel features an IP68 protection rating and operates optimally across a wide temperature range, making it ideal for long-term installations.
Key features
Monocrystalline N-Type I-TOPCon cell technology
Rated power: 455W
Double-glass construction for increased durability
Black anodised aluminiumframe – modern design
Low degradation and high long-term efficiency
Suitable for on-grid and off-grid installations
Excellent performance in low-light conditions
Electrical specifications
Maximum power (Pmax): 455 W
Current at maximum power (Imp): 10.11 A
Short-circuit current (Isc): 10.77 A
Voltage at maximum power (Vmp): 45 V
Open-circuit voltage (Voc): 53.4 V
Construction details
Cell type: N-Type I-TOPCon monocrystalline
Number of cells: 144
Front/rear glass: 1.6 mm heat-strengthened glass
Frame: Anodised aluminium alloy
Protection rating: IP68
Dimensions and weight
Dimensions: 1762 × 1134 × 30 mm
Pallet weight: 760 kg
Packaging: Pallet – 36 units
Operating conditions
Operating temperature: -40°C to +85°C
Warranty
25-year product warranty
30-year linear performance warranty
The Trina Solar 455W photovoltaic panel, based on N-Type I-TOPCon technology, offers high performance, minimal degradation over time and excellent reliability, making it a reliable solution for residential, commercial and industrial projects.
✅ Maximum power: 455W✅ Cell technology: N-Type I-TOPCon monocrystalline✅ Construction: Double-glazed, black anodised aluminium frame✅ Open-circuit voltage (Voc): 53.4V
Download the technical data sheet
Download manual
Download the declaration of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The solar street lamp with a solar panel is an innovative and efficient solution for outdoor lighting, offering numerous benefits and advantages. With a modern design and superior performance, this solar lamp is an excellent choice for lighting outdoor areas in a sustainable and cost-effective way.
The main features of this solar lamp include:
Impressive energy efficiency: With an output of 4800 lumens, this solar lamp provides powerful and uniform lighting to ensure safety and comfort in outdoor areas.
Long operating time: With the ability to operate for up to 120 hours on a single full charge, this lamp provides lighting throughout the night without requiring constant attention.
Fast and efficient charging: Thanks to its high-performance solar panel, this lamp charges fully in just 4–6 hours of sunlight exposure, ensuring optimal performance at night.
Smart motion sensor: The lamp is equipped with a smart motion sensor, which automatically detects nearby movement and switches on to save energy when constant lighting is not required.
Zero electricity costs: Thanksto its solar power, this lamp has zero electricity running costs, helping to save money and natural resources.
Simple, cable-free installation: Installation is easy and requires no cables, making it quick and hassle-free.
This solar street lamp with a solar panel is suitable for a variety of applications, including the lighting of fountains, entrances, terraces, car parks, gardens and footpaths. It provides high-quality lighting in these areas, enhancing safety and comfort during the hours of darkness, whilst protecting the environment through the use of renewable solar energy. With all these impressive features, this solar street lamp is a smart choice for anyone wishing to invest in a sustainable and energy-efficient lighting solution.
Technical specifications
Wattage: 40W
Voltage: 9.6VLithium Battery, 12000mAh
Technical data
Light colour: White
Colour temperature: 6000K
Luminous flux (lm): 4800 lm
Number of LEDs: 90
Housing details
Material: Aluminium , ABS, PC
Charging time: 6–10 hours solar charging
Operating time: 36–120 hours
Operating conditions
Temperature: -20°C to +45°C
IP Rating: IP65
Dimensions: 706 x 290 x 74 mm
Weight: 6.32
Certificates: CE , EMC, ROHS
Warranty: 3years
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
General information
LED type
SMD
Technical data
Angle°
120°x60°
Light colour
Cool white
Colour temperature
6400K
Luminous flux (lm)
4800 lm
Housing details
Material
ABS+PC
Features
IP rating
IP65
Charging time
4–6 hours
Operating time
Max. 60 hours
Battery capacity
6.4V, 6000mAh LiFePO4 battery
100% start-up time
0.001 sec (Instant on)
Colour stability
<6
Dimensions
Size
197.2 x 49 x 190.9 mm
Product details
Product weight
2.06
Product volume
0.008138
Items per box
8
Certifications & standards
Certifications
CE, EMC, RoHS
Warranty
3 years
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Pytes HV48100BMU battery is a reliable and efficient storage solution for high-voltage photovoltaic systems. Designed using LiFePO4 technology, this battery offers a long service life, a high level of safety and a nominal capacity of 5.12 kWh. With a nominal voltage of 51.2V and a continuous discharge current of 50A, it is ideal for residential and commercial applications requiring a stable, long-lasting power source.
Technical specifications:
Cell type: LiFePO4
Rated energy: 5.12 kWh
Nominal voltage: 51.2V
Rated capacity: 100Ah
Continuous charge/discharge current: 50A
Voltage range: 45.5V – 58V
Depth of discharge (DOD): 90%
Service life: >6000 cycles
Operating temperature:
Charging: 0°C ~ 45°C
Discharge: -10°C ~ 50°C
Dimensions: 484 x 530 x 140 mm
Weight: 43 kg
Communication: CAN, RS485
Inverter compatibility:The HV48100BMU battery is compatible with a wide range of HV hybrid inverters from leading manufacturers. It can be used in storage systems for residential, commercial and industrial applications, offering flexibility and energy efficiency.
Download technical data sheet
Download manual
Download DEYE settings
Download SOLIS settings
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Display and Wi-Fi
The display shows the battery, inverter and solar charge controller parameters. The same parameters can be accessed via a smartphone or other Wi-Fi-enabled device. In addition, Wi-Fi can also be used to configure the system and change settings.
The GX device
The integrated GX device includes:
• a BMS-Can interface. This can be used to connect to a compatible battery controlled via the CAN bus. Please note that this is not a VE.Can-compatible port;
• a USB port;
• an Ethernet port;
• a VE.Direct port.
The GX device controls the MultiPlus-II and SmartSolar MPPT via a VE.Bus and a VE.Direct connection.
Technical specifications:
PowerControl & PowerAssist Yes
50A transfer switch
Maximum AC input current 50A
Continuous output power at 25 °C 5000VA
Maximum power 9000W
Maximum efficiency % 96
Maximum battery charging current 70A
Battery temperature sensor Yes
Programmable relay Yes
Operating temperature range: -20 to +45 °C (fan-assisted cooling)
IP21 protection rating
Weight 38.6 kg
Dimensions (H x W x D) mm 604 x 323 x 253
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
⚠️ Stock availability and delivery time for products held in the supplier’s stock must be confirmed by phone.
Download the datasheetDownload the manualDownload the Declaration of Conformity
Victron Energy MultiPlus-II 48/4k5/55-32 combines a sine wave inverter and a battery charger in a single unit. It operates with 48V battery systems and delivers 4kW of continuous power at 25°C.
In the event of a grid failure or generator disconnection, the UPS function supplies the connected loads in less than 20ms. The product features two AC outputs: the main output is uninterruptible, while the auxiliary output operates only when an AC source is available at the input.
PowerControl and PowerAssist help manage a limited grid connection or generator. MultiPlus-II can automatically reduce the current used to charge the battery and temporarily supplement the AC source using stored energy.
The model can be integrated into Victron ESS installations, used in parallel or three-phase configurations, and remotely monitored with compatible Victron devices.
Main features
48V battery system
4kW continuous power at 25°C
7kW maximum power for one minute
Maximum efficiency of 95%
Maximum charging current of 55A
32A transfer switch
Two 230VAC outputs
VE.Bus communication port
Programmable relay
Remote on/off
Parallel and three-phase operation
IP21 protection rating
Recommended applications
Victron ESS energy storage systems
Backup power
Off-grid photovoltaic systems
Remote homes and cabins
Motorhomes and mobile applications
Marine applications
Generator-powered systems
Technical specifications
Specification
Value
Manufacturer
Victron Energy
Series
MultiPlus-II
Model
48/4k5/55-32
Product type
Inverter/charger
Nominal battery voltage
48V
DC input voltage range
38–60V
Output voltage
230VAC ±2%
Output frequency
50Hz ±0.1%
Continuous output power at 25°C
4kW
Continuous output power at 40°C
3.7kW
Continuous output power at 65°C
3kW
Time-limited power, cold start
4.5kW / 2 hours
Time-limited power, cold start
6kW / 25 minutes
Maximum power
7kW / 1 minute
Maximum efficiency
95%
Zero-load power consumption
20W
Zero-load power in AES mode
13W
Zero-load power in Search mode
8W
Transfer switch
32A
Maximum AC input current
32A
AC input voltage range
187–265VAC
AC input frequency
45–65Hz
Maximum battery charging current at 25°C
55A
Maximum battery charging current at 40°C
50A
Absorption charging voltage
57.6V
Float charging voltage
55.2V
Storage mode voltage
52.8V
Auxiliary output
Yes, 32A
Communication
VE.Bus and 2 general-purpose ports
Programmable relay
Yes
Remote on/off
Yes
Operating temperature
-40°C to +65°C
Protection rating
IP21
Battery connection
M8 bolts
230VAC connection
13mm² / 6 AWG terminal block
Dimensions (H × W × D)
590 × 275 × 149mm
Weight
22kg
Compatibility and important information
The product can be configured for lithium, lead-acid, zinc-bromine and other battery technologies. Battery compatibility, BMS communication and charging parameters must be checked before installation.
Bluetooth monitoring requires the optional VE.Bus Smart Dongle, while access through the VRM portal requires a compatible GX device. These accessories are not included unless explicitly stated.
The product has an IP21 protection rating and is intended for indoor installation. Configuration and commissioning must be carried out by qualified personnel.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
⚠️ Stock availability and delivery time for products held in the supplier’s stock must be confirmed by phone.
Download the datasheetDownload the manualDownload the Declaration of Conformity
Victron Energy MultiPlus-II 48/6k5/100-50 combines a pure sine wave inverter and a battery charger rated at up to 100A in a single unit. It is designed for energy storage systems, backup power applications, and installations where grid or generator power must be intelligently supplemented with energy stored in batteries.
The model operates with 48V battery systems and delivers 6kW of continuous power at 25°C. For limited periods, it can support higher loads, reaching 8kW for up to one hour and a maximum output of 11kW for up to one minute, under the conditions specified by the manufacturer.
The MultiPlus-II can be used in grid-connected photovoltaic systems, off-grid installations, marine applications, mobile systems, and backup power solutions.
Important: The “6k5” designation is part of the model’s official name. The confirmed continuous output is 6kW at 25°C, while the 6.5kW rating is available only for a limited period.
Uninterruptible power for essential loads
The inverter’s main output operates as an uninterruptible AC power source. If the grid or generator is disconnected, the MultiPlus-II takes over the connected loads in less than 20ms.
This short transfer time allows computers, electronic equipment, and other critical loads to continue operating without noticeable interruption under normal conditions.
The product also features a second AC output. This output is powered only when an AC source is available at the MultiPlus-II input. It can be used for loads that should not discharge the battery, such as an electric water heater or other non-essential appliances.
PowerControl – protecting the grid or generator
The PowerControl function allows the maximum current available from the grid, generator, or shore power supply to be set.
The MultiPlus-II monitors the consumption of other equipment and uses only the remaining power to charge the batteries. This helps reduce the risk of overloading the AC power source.
PowerAssist – supplementing the available power
When the load temporarily exceeds the power available from the grid or generator, the PowerAssist function covers the difference using energy stored in the batteries.
Once consumption decreases, the available power is used to recharge the batteries. This function is useful in installations supplied by limited-capacity sources or in applications with temporary power-demand peaks.
Integrated 100A battery charger
The integrated charger delivers a maximum charging current of 100A at 25°C and 95A at 40°C.
The MultiPlus-II can be configured for use with several battery technologies, including lithium, lead-acid, and zinc-bromine batteries. The charging parameters must be adjusted according to the battery manufacturer’s specifications.
Integration into Victron ESS systems
The MultiPlus-II can serve as the main component of a Victron ESS – Energy Storage System.
It can be integrated with MPPT solar charge controllers, grid-connected photovoltaic inverters, energy meters, and monitoring and control devices from the Victron ecosystem.
Depending on the system configuration, an energy meter or external AC current sensor may be required to optimise self-consumption and control energy flow.
Parallel and three-phase operation
Up to six MultiPlus-II units can operate in parallel to achieve a higher power output.
Three identical units are required to create a three-phase system, with one unit assigned to each phase. The manufacturer also allows multiple three-phase sets to be connected in parallel, provided that Victron’s design and configuration requirements are followed.
All units used in a parallel or three-phase configuration must be the same model and must be configured accordingly.
Monitoring and control
The product is equipped with a VE.Bus communication port used for:
Parallel operation
Three-phase system configuration
System component integration
Configuration
Monitoring and control
Bluetooth monitoring requires an optional VE.Bus Smart dongle. Remote access and monitoring through the Victron VRM portal require a compatible GX device and an internet connection.
Local configuration may require the Victron MK3-USB interface, depending on the configuration method used.
Integrated protection features
Victron Energy MultiPlus-II includes protection against:
Output short circuits
Overloads
Excessively high battery voltage
Excessively low battery voltage
Excessive temperature
The presence of 230VAC at the inverter output
Excessively high input voltage ripple
The product has an IP21 protection rating and must be installed indoors, in an area protected from water, excessive humidity, and condensation, with adequate ventilation.
Main advantages
Combines an inverter and battery charger in a single unit
Keeps critical loads powered if the AC source fails
Delivers 6kW of continuous power at 25°C
Includes a battery charger rated at up to 100A
Intelligently manages limited AC power sources
Can temporarily supplement grid or generator power
Supports integration into a Victron ESS system
Can be used in parallel and three-phase configurations
Supports local and remote monitoring with the appropriate accessories
Suitable for residential, mobile, marine, and off-grid applications
Recommended applications
Victron ESS energy storage systems
Grid-connected photovoltaic systems
Off-grid photovoltaic systems
Backup power for critical loads
Generator-powered installations
Marine applications
Motorhomes and other mobile applications
Cabins and remote properties
Systems with limited AC power sources
Technical specifications
Specification
Value
Manufacturer
Victron Energy
Series
MultiPlus-II
Model
48/6k5/100-50
Manufacturer product code
PMP482605012
Product type
Inverter/charger
Nominal battery system voltage
48V
DC input voltage range
38–60V
Output voltage
230VAC ±2%
Output frequency
50Hz ±0.1%
Configurable frequency
60Hz
Continuous output at 25°C
6kW
Continuous output at 40°C
5.7kW
Continuous output at 65°C
4.6kW
Cold-start limited output
6.5kW / 4 hours
Cold-start limited output
8kW / 1 hour
Maximum output
11kW / 1 minute
Maximum efficiency
96%
No-load power consumption
28W
No-load consumption in AES mode
18W
No-load consumption in Search mode
8W
Number of AC inputs
1
Number of AC outputs
2
Transfer switch
50A
Maximum AC input current
50A
AC input voltage range
187–265VAC
AC input frequency
45–65Hz
Maximum charging current at 25°C
100A
Maximum charging current at 40°C
95A
Absorption charging voltage
57.6V
Float charging voltage
55.2V
Storage mode voltage
52.8V
PowerControl function
Yes
PowerAssist function
Yes
UPS function
Yes, transfer time under 20ms
Auxiliary output
Yes, 32A
External AC current sensor
Optional, maximum 100A
Programmable relay
Yes
Remote on/off
Yes
Communication
VE.Bus and 2 general-purpose ports
Parallel operation
Yes, up to 6 units
Three-phase configuration
Yes, with 3 identical units
Operating temperature
-40°C to +65°C
Cooling
Fan-assisted
Maximum humidity
95%, non-condensing
Maximum altitude
4,000m
Power derating at altitude
1% for every 100m above 2,000m
Enclosure material
Steel
Colour
Blue, RAL 5012
Protection rating
IP21
Battery connection
M8 bolts
230VAC connection
13mm² / 6 AWG terminal block
Dimensions (H × W × D)
644 × 320 × 150mm
Weight
29kg
Compatibility and integration
The MultiPlus-II 48/6k5/100-50 can be used with lithium, lead-acid, zinc-bromine, and other battery technologies, provided that the charger is configured according to the battery manufacturer’s specified parameters.
Compatibility must be verified for the exact battery model, BMS, communication protocol, and firmware version. Mentioning a battery technology in the Victron datasheet does not automatically confirm direct communication with every battery in that category.
The product can be integrated with:
Victron MPPT solar charge controllers
Grid-connected photovoltaic inverters
Victron GX devices
The Victron VRM portal
Compatible energy meters
External current sensors
The MK3-USB interface
The VE.Bus Smart dongle
Victron ESS systems
The required accessories depend on the system configuration and should not be considered included unless this is explicitly confirmed.
Important warnings
“6k5” is the commercial designation of this model, not its continuous output power. The continuous output is 6kW at 25°C.
The 6.5kW, 8kW, and 11kW output levels are available only for limited periods and under the conditions specified by the manufacturer.
The product does not include an integrated MPPT solar charge controller. A separate solar charge controller or a compatible photovoltaic configuration is required to connect photovoltaic panels directly.
The IP21 protection rating indicates indoor use. The product must not be directly exposed to rain, water jets, or condensation.
Battery compatibility and communication with the BMS must be verified before purchase.
Charger parameters must be configured according to the battery manufacturer’s specifications.
Parallel or three-phase operation requires identical units and configuration in accordance with Victron documentation.
Bluetooth monitoring requires an optional VE.Bus Smart dongle.
Monitoring through the VRM portal requires a compatible GX device and an internet connection.
Local configuration may require an MK3-USB interface.
The external AC current sensor, temperature sensor, GX devices, MK3-USB interface, and other accessories must not be presented as included unless confirmed.
Installation, configuration, and commissioning must be carried out by qualified personnel.
Cables, protection devices, and battery capacity must be sized according to the system configuration and the manufacturer’s requirements.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
⚠️ Stock availability and delivery times for products held in the supplier’s warehouse must be confirmed by phone.
Download the datasheet
The Victron Energy MultiPlus-II GX 48/4k5/55-32 is a multifunctional inverter/charger designed for 48V battery systems. It integrates a sine wave inverter, a battery charger and a GX device in a single enclosure, reducing the number of separate devices required to monitor and control the installation.
The model delivers 4kW of continuous output power at 25°C and can temporarily support higher loads, reaching a peak power of 7kW. The integrated charger can supply up to 55A at 25°C.
The product can be used in grid-connected installations, off-grid systems, mobile applications and generator-powered systems. It must be configured according to the battery type, available energy sources and installation requirements.
Supplying loads during a grid outage
When the grid or generator supply is interrupted, the MultiPlus-II GX automatically switches to the energy stored in the batteries. Critical loads connected to the main AC output can continue operating.
The product also features a 32A auxiliary output. This can be used for loads that should operate only when an AC source is available, helping preserve the energy stored in the batteries.
Integrated GX system
The built-in GX device allows users to monitor the parameters of the battery, inverter and compatible solar charge controllers. The information can be viewed locally on the two-line display or remotely through the Victron Remote Management platform – VRM.
Internet connectivity is available via Wi-Fi or Ethernet. USB, VE.Direct and BMS-CAN interfaces are also provided for integrating other compatible equipment.
PowerControl and PowerAssist
The PowerControl function allows the current drawn from the grid or generator to be limited. If the available power is restricted, the unit automatically reduces the current used for battery charging, preventing the AC source from being overloaded.
PowerAssist can temporarily supplement the power supplied by the grid or generator using energy from the batteries. Once consumption decreases, the available power can be used again to recharge the batteries.
Parallel and three-phase operation
Multiple MultiPlus-II units can be configured in parallel to increase the system’s output power and charging capacity. The product can also be integrated into three-phase configurations. Only one unit with GX functionality is required for a parallel or three-phase system.
Main features
Sine wave inverter and battery charger
Integrated GX system
48V nominal battery voltage
Continuous output power of 4kW at 25°C
Peak power of 7kW for one minute
Maximum charging current of 55A at 25°C
Built-in 32A transfer switch
Two AC outputs
PowerControl and PowerAssist functions
Local monitoring via the GX display
Remote monitoring and configuration via VRM
Parallel and three-phase operation
Programmable relay
Remote on/off control
Recommended applications
Photovoltaic systems with battery storage
Off-grid installations
Backup power systems
Homes and commercial premises
Motorhomes and specialist vehicles
Boats
Generator-powered systems
Parallel and three-phase configurations
Technical specifications
Feature
Specification
Manufacturer
Victron Energy
Model
MultiPlus-II GX 48/4k5/55-32
Manufacturer part number
PMP482406000
Product type
Inverter/charger with integrated GX system
Battery voltage
48V
DC input voltage range
38–60V
AC output voltage
230V ±2%
Output frequency
50Hz ±0.1%, adjustable to 60Hz
Continuous output power at 25°C
4kW
Continuous output power at 40°C
3.7kW
Continuous output power at 65°C
3kW
Time-limited power
4.5kW for up to 2 hours; 6kW for up to 25 minutes from a cold start
Peak power
7kW for one minute
Maximum feed-in power
4kW
Maximum efficiency
95%
Zero-load power
20W
Zero-load power in AES mode
13W
Zero-load power in Search mode
8W
AC input voltage
187–265V
AC input frequency
45–65Hz
Maximum AC input current
32A
Transfer switch
32A
Maximum charging current at 25°C
55A
Maximum charging current at 40°C
50A
Absorption voltage
57.6V
Float voltage
55.2V
Storage voltage
52.8V
Auxiliary output
Yes, 32A
Interfaces
BMS-CAN, USB, Ethernet, VE.Direct, Wi-Fi
VE.Bus communication
Yes
External current sensor
100A, optional
Programmable relay
Yes
Remote on/off
Yes
Operating temperature
-40°C to +65°C
Maximum humidity
95%, non-condensing
Maximum altitude
2,000m
Protection rating
IP21
Battery connection
M8 bolts
AC connection
Screw terminals, maximum 13mm²
Enclosure material
Steel
Colour
Blue, RAL 5012
Dimensions
590 × 275 × 149mm
Weight
21.4kg
Battery compatibility
The MultiPlus-II GX can be configured for lithium, lead-acid, zinc-bromine and other supported battery technologies. The charger parameters must be configured according to the battery manufacturer’s requirements.
The BMS-CAN port is intended for compatible CAN-managed batteries communicating at 500kbps. It is not a standard VE.Can port.
Compatibility depends on the battery model, BMS protocol and firmware version. We recommend checking the system configuration before purchase.
Protections
The product includes protection against:
Output short circuit
Overload
Excessively high battery voltage
Excessively low battery voltage
Excessive temperature
AC voltage present at the inverter output
Excessive input voltage ripple
Optional accessories
100A external current sensor
Battery temperature sensor
Victron GX GSM modem
Digital Multi Control panel
GSM antenna and GPS antenna
Compatible Victron equipment for system expansion
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
⚠️ Stock availability and the delivery time for products held in the supplier’s stock must be confirmed by phone.
Download the datasheet
The Victron Energy MultiPlus-II GX 48/6k5/100-50 is a multifunctional inverter/charger designed for 48V battery systems. It combines a sine wave inverter, a battery charger and a GX device for system monitoring and control in a single enclosure.
With a continuous output power of 6kW at 25°C and a peak power of up to 11kW, the unit can support residential loads, off-grid installations, mobile systems and professional applications. The built-in charger can deliver up to 100A, depending on the operating temperature and system configuration.
In the event of a grid outage or generator disconnection, the MultiPlus-II GX automatically switches to battery power. The main AC output can continue supplying critical loads, while the 32A auxiliary output is intended for equipment that should operate only when an AC source is available.
Integrated GX monitoring
The built-in GX device simplifies system integration and monitoring. Battery, inverter and compatible solar charge controller parameters can be viewed locally on the two-line display or remotely through the Victron Remote Management platform – VRM.
The system can be connected to the network via Wi-Fi or Ethernet and provides USB, VE.Direct and BMS-CAN interfaces for integrating compatible equipment.
PowerControl and PowerAssist
The PowerControl function allows a limit to be set for the current drawn from the grid or generator. When the installation’s power consumption increases, the MultiPlus-II GX can automatically reduce the current used for battery charging, helping prevent the AC source from being overloaded.
With PowerAssist, energy stored in the batteries can temporarily supplement the power available from the grid or generator. Once consumption decreases, the available surplus is used to recharge the batteries.
Expandable configurations
Multiple MultiPlus-II units can be configured in parallel to increase system output power and charging capacity. The product can also be used in three-phase installations. Only one unit with GX functionality is required in a parallel or three-phase system.
Main features
Sine wave inverter and battery charger in a single unit
Nominal battery system voltage: 48V
Continuous output power: 6kW at 25°C
Peak power: 11kW for one minute
Maximum charging current: 100A at 25°C
Built-in 50A transfer switch
Two AC outputs, including a 32A auxiliary output
PowerControl and PowerAssist functions
Local monitoring via the GX display
Remote monitoring and configuration via VRM
Parallel and three-phase operation capability
Programmable relay and remote on/off control
Recommended applications
Photovoltaic systems with battery storage
Off-grid installations
Backup power systems
Homes and commercial premises
Motorhomes and specialist vehicles
Boats
Generator-powered systems
Single-phase, parallel or three-phase installations
Technical specifications
Feature
Specification
Manufacturer
Victron Energy
Model
MultiPlus-II GX 48/6k5/100-50
Product type
Inverter/charger with integrated GX system
Battery voltage
48V
DC input voltage range
38–60V
AC output voltage
230V ±2%
Output frequency
50Hz ±0.1%, adjustable to 60Hz
Continuous output power at 25°C
6kW
Continuous output power at 40°C
5.7kW
Continuous output power at 65°C
4.6kW
Time-limited power
6.5kW for up to 4 hours; 8kW for up to one hour from a cold start
Peak power
11kW for one minute
Maximum feed-in power
6kW
Maximum efficiency
96%
Zero-load power
28W
Zero-load power in AES mode
18W
Zero-load power in Search mode
8W
AC input voltage
187–265V
AC input frequency
45–65Hz
Maximum AC input current
50A
Transfer switch
50A
Maximum charging current at 25°C
100A
Maximum charging current at 40°C
95A
Absorption voltage
57.6V
Float voltage
55.2V
Storage voltage
52.8V
Auxiliary output
Yes, 32A
Interfaces
BMS-CAN, USB, Ethernet, VE.Direct, Wi-Fi
VE.Bus communication
Yes
External current sensor
100A, optional
Programmable relay
Yes
Remote on/off
Yes
Operating temperature
-40°C to +65°C
Maximum humidity
95%, non-condensing
Maximum altitude
2,000m
Protection rating
IP21
Enclosure material
Steel
Colour
Blue, RAL 5012
Dimensions
644 × 320 × 150mm
Weight
29kg
Battery compatibility
The MultiPlus-II GX can be configured for lithium, lead-acid, zinc-bromine and other compatible battery technologies. The charger parameters must be configured according to the battery manufacturer’s requirements.
For CAN-managed batteries, the BMS-CAN port is intended for compatible models that communicate at 500kbps. It should not be confused with a standard VE.Can port.
Compatibility depends on the battery model, BMS protocol and firmware version. We recommend checking the system configuration before purchase.
Protections
The product includes protection against:
Output short circuit
Overload
Excessively high battery voltage
Excessively low battery voltage
Excessive temperature
AC voltage present at the inverter output
Excessive input voltage ripple
Optional accessories
100A external current sensor
Battery temperature sensor
Victron GX GSM modem
Digital Multi Control panel
GSM antenna and GPS antenna
Compatible Victron equipment for system expansion
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The V-TAC VT-51201-W LiFePO4 battery, with a capacity of 5.12 kWh and a nominal voltage of 51.2V, is a reliable and efficient energy storage solution for residential and commercial photovoltaic systems.
Manufactured by DEYE and branded as V-TAC, this model is technically identical to the renowned SE-G5.1 Pro-B, featuring the same components, the same robust casing and the same quality standards.
✅ The same MCB manufacturer – Tengen – for both this model and the SE-G5.1 Pro-B, confirming the identity of the essential components.✅ Identical BMS and identical LED layout – the configuration of 3 LEDs at the top and 5 at the bottom, just like in the DEYE model, for clear and intuitive monitoring.✅ Full compatibility with DEYE hybrid inverters and other brands via CAN and RS485 interfaces.✅ Versatile mounting: rack-mounted, wall-mounted or stackable, with all accessories included – feet, rack ears and wall bracket.✅ Complete package: power, parallel and communication cables included as standard.✅ Consistent performance: up to 6,000 cycles at 80% DOD and efficiency >95%.
Key technical specifications:
Model: VT-51201-W
Rated capacity: 5.12 kWh
Nominal voltage: 51.2V
Maximum discharge current: 100A
Cell type: LFP (LiFePO4)
Number of cycles: ≥6000 (at 80% DOD)
Operating temperature: -10°C ~ +50°C
Communication: CAN / RS485
Protection rating: IP20
Weight: 46 kg
Dimensions: 442 x 420 x 133 mm
Mounting: Rack / Wall / Stackable
Warranty: 5 years
Key benefits:
Manufactured by DEYE, with internal components identical to the SE-G5.1 Pro-B model
Fitted with a Tengen MCB – the same manufacturer used by DEYE
Identical BMS and familiar LED interface for installers
Supplied with all necessary accessories – ready for installation
Ideal for self-consumption, backup and off-grid systems
? Manufactured by DEYE and branded as V-TAC, this model is technically identical to the renowned SE-G5.1 Pro-B, featuring the same components, the same robust casing and the same quality standards.
✅ Nominal voltage: 51.2V
✅ Maximum discharge current: 100A
✅ Communication: CAN
✅ Protection rating: IP20
✅ Warranty: 5 years
Download the technical data sheet
Download manual
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The E-BOX series: the new-generation LiFePo4 battery for energy storage systems. Battery manufacturer Pytes offers a safe, well-designed and high-performance LiFePo4 solution. The battery pack is compact, easy to install, maintenance-free and can be integrated into an energy storage system by connecting multiple units in parallel. It is widely used in domestic applications, small commercial and industrial energy storage systems, as well as telecommunications stations.
Download the technical data sheet
Download the list of compatible inverters (CAN/RS485)
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT PROavr-50k three-phase servo motor stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT PROavr-50k automatic voltage stabiliser.
Protect your devices against power surges
In single-phase mode, each phase can operate independently of the others. Regardless of the mains load and fluctuations in the output voltage, the KEMOT PROavr-50k stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Regulation is automatic, ensuring high precision of the output voltage. A fault in the operation of one phase does not affect the operation of the others.
Three-phase mode
In three-phase mode, it is important to maintain balance between the phases. The stabiliser monitors and controls the voltage on each phase to ensure consistency between them – it will compensate for an input voltage that is too high or too low and supply the output voltage once stabilised. If, in this mode, one of the phases is not functioning properly or is not connected, the unit will activate the protection circuit and will not supply output voltage, indicating this via the ‘PHASE ERROR’ indicator light.
Servo-driven voltage stabiliser
The KEMOT PROavr-50k voltage stabiliser maintains voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
BYPASS switch
The device is also equipped with a “bypass” function, i.e. a switch that bypasses the stabiliser’s operation, allowing it to be isolated and enabling the home network to be powered without issues from an external source.
DELAY Function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT PROavr-50k is equipped with a DELAY switch button that ranges from 6 to 180 seconds, which will reduce the risk of damage to the stabiliser when devices connected to it have a high inrush current. In addition, the KEMOT PROavr-50k stabiliser features protection against overvoltage and undervoltage, overload, overheating and short circuits.
Easy transport
To make it easier to move and position the KEMOT stabiliser in the right place, it is fitted with four sturdy wheels. Thanks to these, you can easily transport the device to different locations, which will certainly make operation and maintenance easier.
Usage
The KEMOT PROavr-50k can be used both at home and in the office. It is perfect for:
televisions and audio/video equipment;
speakers, mini audio systems and other audio/video devices;
household appliances such as induction hobs, microwaves, fridges and freezers;
computers, monitors, printers, cash registers and other office equipment;
ovens and central heating pumps;
power generators.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Voltage fluctuations in the mains supply can cause equipment to operate erratically or even fail. The KEMOT URZ3426-5K 5kVA voltage stabiliser is designed to maintain a constant voltage of 230V ±3%, protecting electrical appliances against voltage fluctuations.
With a capacity of 5000 VA (3500 W) and servo-motor technology, this stabiliser offers continuous and precise voltage regulation, making it ideal for sensitive equipment or electrical installations requiring a stable power supply.
Continuous stabilisation with servo motor
The URZ3426-5K model uses a servo-motor control system and a C.R.G.O. toroidal transformer, which continuously adjusts the output voltage in response to fluctuations in the mains supply. This technology ensures more precise stabilisation compared to relay-based stabilisers.
High efficiency of 98% contributes to reduced energy losses and stable long-term operation.
Complete protection for equipment
The stabiliser is equipped with several protection systems to ensure the safety of connected devices:
short-circuit protection
overvoltage protection
overheating protection
These features help prevent damage to equipment and ensure safe operation.
Recommended applications
The KEMOT 5kVA servo-motor stabiliser is ideal for powering:
servers and IT equipment
surveillance and security systems
sensitive electronic equipment
professional audio-video systems
electrical appliances in homes or offices
General information
Model
URZ3426-5K
Power
5000 VA
Actual power
3500 W
Stabilisation type
Servo motor
Transformer
Toroidal C.R.G.O.
Electrical data
Input voltage
130 – 260 VAC
Input frequency
50 Hz
Output voltage
230 VAC
Output frequency
50 Hz
Stabilisation accuracy
±3%
Efficiency
98%
Output type
Single-phase
Sockets
2 sockets (German and French types)
Protections
Protections
Short circuit, overvoltage, overheating
Operating conditions
Operating temperature
0 – 40°C
Humidity
10 – 90%
Storage temperature
-15 – 45°C
Dimensions and weight
Dimensions
302 × 260 × 146 mm
Weight
11.8 kg
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT SER-5000-S Automatic Voltage Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT SER-5000-S automatic voltage stabiliser.
Protect your devices from power surges
Regardless of the mains load and fluctuations in the output voltage, the KEMOT SER-5000-S stabiliser maintains them at 230 V ±8%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Adjustment is automatic, ensuring high precision of the output voltage. The KEMOT SER-5000-S is suitable for use at home or in the office, being ideal for televisions and audio-visual equipment, as well as speakers, mini-stereo systems and other audio/video devices or computers.
How does the SER-10000-S voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain the set output voltage of 230 V. Its function is to boost an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permitted range and to prevent dangerous voltage spikes that could damage connected devices. The stabiliser’s design is based on a toroidal transformer, which ensures the device operates stably.
DELAY function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT SER-5000-S is equipped with a DELAY start-up delay button with a range of 6 to 180 seconds, which reduces the risk of damage when devices connected to it have a high instantaneous start-up current. In addition, the SER-5000-S stabiliser features protection against overvoltage, undervoltage, overload, overheating and short circuits.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT SER-500-S Automatic Voltage Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices switching off suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT SER-500-S automatic voltage stabiliser.
Protect your devices from power surges
Regardless of the mains load and fluctuations in the output voltage, the KEMOT SER-500-S stabiliser maintains them at 230 V ±8%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Adjustment is automatic, ensuring high precision of the output voltage. The KEMOT SER-500-S is suitable for use at home or in the office, being ideal for televisions and audio-visual equipment, as well as speakers, mini-stereo systems and other audio/video devices or computers.
How does the SER-500-S voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain the set output voltage of 230 V. Its function is to boost an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permitted range and to prevent dangerous voltage spikes that could damage connected devices. The stabiliser’s design is based on a toroidal transformer, which ensures the device operates stably.
DELAY function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT SER-500-S is fitted with a DELAY start-up delay button with a range of 6 to 180 seconds, which reduces the risk of damage when devices connected to it have a high instantaneous start-up current. In addition, the SER-500-S stabiliser features protection against overvoltage, undervoltage, overload, overheating and short circuits.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT SER-500 Voltage Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices suddenly switching off or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT SER-500 automatic voltage stabiliser.
Protect your devices from power surges
Regardless of the mains load and fluctuations in the output voltage, the KEMOT SER-500 stabiliser maintains it at 230 V ±3%, ensuring the efficient operation of all devices, including those sensitive to mains voltage quality. Adjustment is automatic, ensuring high precision of the output voltage. The KEMOT SER-500 is suitable for use at home or in the office, being ideal for televisions and audio-visual equipment, as well as speakers, mini-stereo systems and other audio/video devices or computers.
How does the SER-500 voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain the set output voltage of 230 V. Its function is to boost an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permitted range and does not experience dangerous surges that could damage connected devices. The stabiliser’s design is based on a transformer, which ensures the device operates stably.
DELAY function
If you need a voltage stabiliser for devices with a high instantaneous start-up current, choose a model equipped with the DELAY start-up delay function. The KEMOT SER-500 is equipped with a DELAY start-up delay button with a range of 6 to 180 seconds, which reduces the risk of damage when devices connected to it have a high instantaneous start-up current. In addition, the SER-500 stabiliser features protection against overvoltage, undervoltage, overload, overheating and short circuits.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT MSER-500 Servomotor Voltage Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT MSER-500 automatic voltage stabiliser.
Protect your devices from power surges
Regardless of the mains load and fluctuations in the output voltage, the KEMOT MSER-500 stabiliser maintains it at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Adjustment is automatic, ensuring high precision of the output voltage. The KEMOT MSER-500 is suitable for use at home or in the office, being ideal for televisions and audio-visual equipment, as well as speakers, mini-stereo systems and other audio/video devices or computers.
How does the MSER-500 voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain the set output voltage of 230 V. Its function is to increase an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permitted range and does not experience dangerous surges that could damage connected devices. The stabiliser’s design is based on a transformer, which ensures the device operates stably.
Servo-motor voltage stabiliser
The KEMOT MSER-500 voltage stabiliser maintains the voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Trina Solar Vertex S+ 505W N-Type i-TOPCon photovoltaic panel is a premium solution for residential, commercial and industrial photovoltaic systems requiring high performance, long-term reliability and maximum energy output. Thanks to advanced N-Type i-TOPCon technology and its bifacial double-glass construction, the module can capture energy from both the front and rear sides, increasing the system’s overall efficiency.
The compact design, measuring less than 2 metres in length and with a low weight, facilitates handling and installation, and is compatible with most existing inverters, optimisers and mounting systems. Furthermore, low power degradation and an extended 30-year warranty ensure a secure and profitable long-term investment.
Technical specifications
Maximum power (Pmax): 505 W
Module efficiency: 22.7%
Power tolerance: 0 ~ +5 W
Voltage at maximum power (Vmp): 33.5 V
Current at maximum power (Imp): 15.09 A
Open-circuit voltage (Voc): 40.3 V
Short-circuit current (Isc): 15.89 A
Maximum system voltage: 1500 V DC
Maximum series fuse rating: 30 A
Technology: N-Type i-TOPCon monocrystalline
Bifaciality: 80 ±5%
Construction
Module type: Bifacial Dual Glass
Number of cells: 108
Front glass: 1.6 mm AR-coated heat-strengthened glass
Rear glass: 1.6 mm heat-strengthened glass
Frame: Anodised aluminium, black
Junction box: IP68, 3 bypass diodes
Connectors: TS4 Plus / TS4 / MC4 EVO2
Photovoltaic cable: 4.0 mm²
Dimensions and weight
Dimensions: 1961 × 1134 × 30 mm
Weight: 23.5 kg
Operating conditions
Operating temperature: -40°C to +70°C
NOCT: 43°C ±2°C
Pmax temperature coefficient: -0.29%/°C
Voc temperature coefficient: -0.24%/°C
Isc temperature coefficient: +0.04%/°C
Advantages and benefits
✔ N-Type i-TOPCon technology for high efficiency and low degradation.
✔ Dual-glass bifacial design that captures reflected energy and increases total output.
✔ High power output of 505W to reduce the number of panels required in a system.
✔ Low degradation: maximum 1% in the first year and just 0.4% annually between years 2 and 30.
✔ Excellent resistance to severe weather conditions, with loads of up to 5,400 Pa for snow and 2,400 Pa for wind.
✔ Compatibility with most existing inverters and mounting systems.
✔ 25-year product warranty.
✔ 30-year performance guarantee, with a minimum of 87.4% of the rated power after 30 years.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Canadian Solar CS6.2-54TM-505 photovoltaic panel, from the TOPHiKu6 range, is a premium solution designed for residential, commercial and industrial applications where high performance and long-term reliability are essential.
Equipped with advanced N-type TOPCon technology, this module offers superior efficiency, low losses and excellent operational stability, including in high-temperature conditions. It is the ideal choice for efficient and sustainable photovoltaic systems.
With a power output of 505W and an efficiency of 22.7%, the panel ensures optimised energy production, even in less favourable conditions. The robust construction, featuring tempered glass and an anodised aluminium frame, guarantees excellent resistance to environmental factors.
Key features
High power: 505W
High efficiency: 22.7%
Modern technology: N-Type TOPCon
Excellent performance at high temperatures
Mechanical strength: 5400 Pa (snow) / 2400 Pa (wind)
System voltage: 1500V
Extended warranty: 15 years product + 30 years performance
Advantages
Higher long-term energy output
Reduced degradation compared to standard panels
Ideal for residential and commercial projects
Compatible with most inverters on the market
High reliability in extreme conditions
General information
Model
CS6.2-54TM-505
Cell technology
N-type TOPCon
Cell configuration
108 [2 × (9 × 6)]
Electrical data (STC)
Rated power (Pmax)
505 W
Module efficiency
22.7%
Vmp
33.6 V
Imp
15.04 A
Physical data
Dimensions
1961 × 1134 × 30 mm
Weight
23.3 kg
Warranty
Product
15 years
Performance
30-year linear
✅Rated power: 505W
✅Technology:N-Type TOPCon
✅High efficiency: up to 22.7%
✅Glass-glass structure for maximum durability
✅Warranty: 25 years product / 30 years performance
Download technical data sheet
Download the declaration of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 50A, 58V MIDI fuse is specifically designed to protect 48V electrical equipment against overloads and short circuits. This individual fuse is ideal for applications requiring safe and reliable protection in DC systems, offering a high level of protection and durability.
Rated current: 50A
Maximum voltage: 58V
Fuse type: MIDI
Compatibility: 48V products
Package: 1 piece
Perfect for renewable energy systems and other applications operating at high voltages, this MIDI fuse is essential for the optimal protection of electrical devices.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This comprehensive kit from Kstar is the ideal solution for large-scale photovoltaic installations, offering excellent performance in terms of both energy generation and storage. With a 50 kW inverter and a 102.4 kWh energy storage system, this kit is perfect for supporting prosumers and businesses looking to maximise the efficiency of their photovoltaic system. Designed for outdoor use with a high protection rating (IP65), this product guarantees long-term durability and reliability.
Technical specifications:
KAC500DP inverter (50 kW):
Maximum PV input voltage: 1000 V
MPPT range: 350 V – 800 V
Maximum MPPT current: 36 A
Number of MPPT tracks: 3
Maximum battery input voltage: 750 V
Nominal input voltage: 500 V – 750 V
Maximum input current: 55 A x 2
DC input power: 55 kW
Nominal AC output power: 50 kW
Maximum AC output power: 55 kVA
Maximum AC current: 80 A
Rated AC voltage: 400 V
Efficiency: 97.5%
Battery storage – BC100DE:
Battery type: LFP (LiFePO4)
Battery capacity: 102.4 kWh
Number of modules: 10
Battery module capacity: 5.12 kWh
Nominal voltage: 480 V
Operating voltage range: 480 V – 560 V
Discharge capacity: Max. 0.5 C
IP rating: IP54
Operating temperature: -30°C – +50°C
Installation: Outdoor
Advantages:
Top performance: The kit combines a powerful 50 kW inverter with a 102.4 kWh storage system, offering a complete solution to meet high energy demands, whether for industrial or commercial users.
High efficiency: The inverter has an efficiency of 97.5%, ensuring optimal use of the energy produced and stored, reducing losses and maximising system performance.
Safety and reliability: Integrated protections, including overvoltage protection and short-circuit protection, ensure safe operation in all conditions. Furthermore, the kit is equipped with IP65 protection, meaning it is fully dust-proof and water-resistant, making it ideal for outdoor use.
Quick and easy installation: Thanks to its smart design, installing this system is quick and simple, reducing installation costs and the time required for commissioning.
Durability in extreme conditions: With an operating temperature range of -30°C to +50°C, this kit is built to withstand extreme weather conditions, ensuring consistent performance even in challenging environments.
The 50 kW Inverter + 102.4 kWh Storage, IP65 kit from Kstar is an excellent choice for those seeking a powerful, reliable and efficient photovoltaic system, suitable for both commercial and industrial use. With a robust design, IP65 protection and excellent performance, this product ensures optimal use of solar energy and its storage in a safe and efficient manner.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Kstar 50 kW Inverter + 197 kWh Storage Kit is a comprehensive and efficient solution for large-scale photovoltaic installations, combining the performance of a powerful 50 kW inverter with a 197 kWh energy storage system. With IP65 protection, this kit is perfect for outdoor installation and guarantees reliable operation, even in extreme environmental conditions. It is ideal for use in commercial and industrial applications, and for prosumers looking to optimise the storage and use of solar energy.
Technical specifications:
KAC500DP inverter (50 kW):
Maximum PV input voltage: 1000 V
MPPT range: 350 V – 800 V
Maximum MPPT current: 36 A
Number of MPPT tracks: 3
Maximum battery input voltage: 750 V
Nominal input voltage: 500 V – 750 V
Maximum input current: 55 A x 2
DC input power: 55 kW
Nominal AC output power: 50 kW
Maximum AC output power: 55 kVA
Maximum AC current: 80 A
Rated AC voltage: 400 V
Efficiency: 97.5%
Reverse connection protection, DC protection, overvoltage protection
IP protection: IP65
Battery storage – BC197DE:
Battery type: LFP (LiFePO4)
Battery capacity: 197 kWh
Number of modules: 11
Battery module capacity: 17.92 kWh
Nominal voltage: 704 V
Operating voltage range: 616 V – 792 V
Discharge capacity: Max. 0.5 C
IP rating: IP54
Operating temperature: -30°C – +50°C
Installation: Outdoor
Advantages:
High storage capacity: The kit includes a 197 kWh storage system, ideal for meeting the energy requirements of commercial and industrial applications, ensuring efficient energy management.
Efficient performance: The 50 kW inverter with 97.5% efficiency guarantees optimal use of solar energy, reducing losses and maximising yield.
Complete protection: IP65 protection makes this system fully dust and water-resistant, making it perfect for outdoor installation in all weather conditions. Additional protection against overvoltage and incorrect connections ensures safe and reliable operation.
Quick and easy installation: Thanks to its easy-to-install design, this kit can be put into operation quickly, saving time and installation costs.
Durability and reliability: The kit is designed to withstand extreme weather conditions, with an operating temperature range of -30°C to +50°C, ensuring consistent performance even in challenging environments.
The Kstar 50 kW Inverter + 197 kWh Storage Kit is the ideal solution for large-scale photovoltaic projects requiring both energy generation and efficient storage. With a robust design, IP65 protection and top-tier performance, this system ensures optimal use of solar energy and low long-term energy costs, making it perfect for commercial and industrial applications.
