10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Display and Wi-Fi
The display shows the battery, inverter and solar charge controller parameters. The same parameters can be accessed via a smartphone or other Wi-Fi-enabled device. In addition, Wi-Fi can also be used to configure the system and change settings.
The integrated GX device includes:
• a BMS-Can interface. This can be used to connect to a compatible battery controlled via the CAN bus. Please note that this is not a VE.Can-compatible port;
• a USB port;
• an Ethernet port;
• a VE.Direct port.
The GX device controls the MultiPlus-II and SmartSolar MPPT via a VE.Bus and a VE.Direct connection.
Technical specifications:
PowerControl & PowerAssist Yes
32A transfer switch
Maximum AC input current 32A
Continuous output power at 25 °C 3000VA
Maximum power 5500W
Maximum efficiency % 94
Maximum battery charging current 70A
Battery temperature sensor Yes
Programmable relay Yes
Operating temperature range: -20 to +45 °C (fan-assisted cooling)
IP21 protection rating
Weight 26 kg
Dimensions (H x W x D) mm 499 x 268 x 237
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The choice of energy meter depends on the type of installation, the number of phases you wish to measure, and the maximum current per phase. Examples: for a three-phase connection to the utility grid, a three-phase meter is recommended. In the case of a three-phase photovoltaic inverter, a three-phase meter must also be used. If you have a single-phase connection to the utility grid, choose a single-phase meter.
In a system with a single-phase connection and a photovoltaic inverter that requires measurement with an energy meter, you can opt for two ET112 meters or one ET340 meter. If the application exceeds the maximum rated current, it is advisable to use an energy meter with current transformers. Please also note that most photovoltaic inverters are equipped with a “direct reading” function via the Victron system, so it is not necessary to measure their output with an energy meter.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The choice of energy meter depends on the type of installation, the number of phases you wish to measure, and the maximum current per phase. Examples: for a three-phase connection to the utility grid, a three-phase meter is recommended. In the case of a three-phase photovoltaic inverter, a three-phase meter must also be used. If you have a single-phase connection to the utility grid, choose a single-phase meter.
In a system with a single-phase connection and a photovoltaic inverter that requires measurement with an energy meter, you can opt for two ET112 meters or one ET340 meter. If the application exceeds the maximum rated current, it is advisable to use an energy meter with current transformers. Please also note that most photovoltaic inverters are equipped with a “direct reading” function via the Victron system, so it is not necessary to measure their output with an energy meter.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Victron Energy M8 dual terminal set is the ideal solution for the safe connection of batteries and electrical components. This set includes two M8 stud terminals, one red and one black, to facilitate polarity identification. Each terminal has a maximum current rating of 150A and supports a voltage of up to 70VDC.
Made from high-quality stainless steel, the terminals are corrosion-resistant, ensuring long-term durability. The hexagonal nuts are also made of stainless steel, guaranteeing a secure grip. With a recommended torque of 10 N·m, these terminals provide a secure connection.
The bus bar is made of tin-plated copper, and the base is made of glass-fibre-reinforced nylon, ensuring excellent stress resistance. The compact dimensions (45 x 43 x 32 mm) and low weight (70 g) make this set suitable for a variety of applications, including marine and solar energy systems.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter combines a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features. Selected technical specifications: AC power at 25 °C (VA) 1200; Maximum power (W) 2400; AC input voltage (V) 187–265; AC output voltage (V) 230; Input voltage (V DC) 9.5–17; Max. efficiency (%) 93; Operating temperature –40 to +65°C; Dimensions (mm) 406 x 250 x 100; Weight (kg) 8.2;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
Selected technical specifications:
AC power at 25 °C (VA) 1600;
Maximum power (W) 2800;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 470 x 265 x 120;
Weight (kg) 10.2;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter combines a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch within a single compact enclosure. In addition to these core functions, the Multiplus offers numerous advanced features.
Selected technical specifications:
AC power at 25 °C (VA) 2000;
Maximum power (W) 3500;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 470 x 265 x 120;
Weight (kg) 15;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus inputs.
Technical specifications:
AC power at 25 °C (VA) 3000;
Maximum power (W) 6000;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Mains charging current (A) 120;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 362 x 258 x 218;
Weight (kg) 18;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
Technical specifications:
AC power at 25°C (VA) 3000;
Maximum power (W) 6000;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Mains charging current (A) 120;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 362 x 258 x 218;
Weight (kg) 18;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter combines a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch within a single compact enclosure. In addition to these core functions, the Multiplus offers numerous advanced features.
Selected technical specifications:
AC power at 25 °C (VA) 500;
Maximum power (W) 900;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Max. efficiency (%) 90;
Operating temperature -40 to +65°C;
Dimensions (mm) 311 x 182 x 100;
Weight (kg) 4.4;
Please refer to the technical data sheet for full details!
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
Selected technical specifications:
AC power at 25 °C (VA) 800;
Maximum power (W) 1600;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Max. efficiency (%) 92;
Operating temperature -40 to +65°C;
Dimensions (mm) 360 x 240 x 100;
Weight (kg) 6.4;
Please refer to the technical data sheet for full details!
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
AC power at 25 °C (VA) 1200;
Maximum power (W) 2400;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Mains inrush current (A) 25;
Max. efficiency (%) 94;
Operating temperature -40 to +65°C;
Dimensions (mm) 375 x 214 x 110;
Weight (kg) 10;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
AC power at 25 °C (VA) 1600;
Maximum power (W) 2800;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Max. efficiency (%) 94;
Operating temperature -40 to +65°C;
Dimensions (mm) 470 x 265 x 120;
Weight (kg) 10.2;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
AC power at 25 °C (VA) 2000;
Maximum power (W) 3500;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Max. efficiency (%) 94;
Operating temperature -40 to +65°C;
Dimensions (mm) 506 x 236 x 147;
Weight (kg) 15.5;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
AC power at 25 °C (VA) 3000;
Maximum power (W) 6000;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Mains charging current (A) 70;
Max. efficiency (%) 94;
Operating temperature -40 to +65°C;
Dimensions (mm) 362 x 258 x 218;
Weight (kg) 18;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
AC power at 25 °C (VA) 3000;
Maximum power (W) 6000;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Mains charging current (A) 70;
Max. efficiency (%) 94;
Operating temperature -40 to +65°C;
Dimensions (mm) 362 x 258 x 218;
Weight (kg) 18;
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
AC power at 25 °C (VA) 500;
Maximum power (W) 900;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Max. efficiency (%) 91;
Operating temperature -40 to +65°C;
Dimensions (mm) 311 x 182 x 100;
Weight (kg) 4.4;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
AC power at 25 °C (VA) 5000;
Maximum power (W) 10,000;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Mains charging current (A) 120;
Max. efficiency (%) 94;
Operating temperature -40 to +65°C;
Dimensions (mm) 444 x 328 x 240;
Weight (kg) 30;
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
AC power at 25 °C (VA) 800;
Maximum power (W) 1600;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 360 x 240 x 100;
Weight (kg) 6.4;
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at the Multiplus input.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
Technical specifications:
AC power at 25°C (VA) 1200;
Maximum power (W) 2400;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Max. efficiency (%) 95;
Operating temperature -40 to +65°C;
Dimensions (mm) 406 x 250 x 100;
Weight (kg) 8.2;
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at the Multiplus input.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
Selectedtechnical specifications:
AC power at 25°C (VA) 1600;
Maximum power (W) 2800;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Max. efficiency (%) 95;
Operating temperature -40 to +65°C;
Dimensions (mm) 465 x 270 x 120;
Weight (kg) 10;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when backup power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at the Multiplus input.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
Selectedtechnical specifications:
AC power at 25°C (VA) 2000;
Maximum power (W) 3500;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Max. efficiency (%) 95;
Operating temperature -40 to +65°C;
Dimensions (mm) 506 x 234 x 146;
Weight (kg) 15;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
Technical specifications:
AC power at 25°C (VA) 3000;
Maximum power (W) 6000;
Input voltage (AC) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Mains charging current (A) 35;
Max. efficiency (%) 95;
Operating temperature -40 to +65°C;
Dimensions (mm) 362 x 258 x 218;
Weight (kg) 18;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
Technical specifications:
AC power at 25°C (VA) 3000;
Maximum power (W) 6000;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Mains charging current (A) 35;
Max. efficiency (%) 95;
Operating temperature -40 to +65°C;
Dimensions (mm) 362 x 258 x 218;
Weight (kg) 18;
