10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UNI-T UT312A is a portable vibration tester comprising an acceleration sensor and a digital display circuit. It is primarily used to measure the acceleration, velocity and displacement of vibrations in mechanical devices. Its advantages include a wide measurement range, ease of use and convenient portability. The vibration tester is used for inspection work in the mechanical engineering, energy, chemical and metallurgical industries, aviation and many other sectors. An ideal tool for technical inspection and maintenance of rotating equipment (fans, pumps, compressors, motors and others).
Product parameters:
- simple design, compact structure, easy to carry and use
- measurement of acceleration, velocity and displacement
- high and low frequency acceleration
- multiple high- and low-frequency acceleration modes
- multiple magnetic acceleration modes
cup
- highly sensitive sensor
- torch for measurements at night or in environments with poor lighting conditions
- 2.4-inch TFT colour screen, improved display of measured values and status
- auto-rotating screen, easy to view and control
- Switchable high and low vibration frequency
- Rechargeable battery:
- UKCA-certified lithium
Technical specifications:
- acceleration (PEAK):
range: 0.1 to 199.9 m/s²
frequency response: 10 Hz to 15 kHz, 0.1 m/s², ±(5% + 2 digits)
vibration velocity measurement)
range: 0.1 to 199.9 mm/s
frequency response: 10 Hz to 1.5 kHz, 0.1 mm/s, ±(5% + 2 digits)
- oscillation amplitude measurement (P-P)
range: 0.001 to 199 Hz frequency response: z 9. , 0.001 mm , ±(10%+2dgts)
- auto-rotating screen
- High-frequency/low-frequency acceleration
- Datahold (data hold)
- torch
- LCD type: 2.4″ colour TFT display, full LCD display
-/>- 5 minutes of automatic operation
-/> probes: long and short probes (optional), U-shaped magnetic suction cup
- low battery indicator
- Battery type: 1350 mAh / 3.7 V lithium battery
- Charging interface: USB-C
- charging voltage: DC 5 V
- charging time: approx. and humidity: 0 °C to 40 °C; ≤ 80% RH, non-condensing
- Storage temperature: -20 °C to 60 °C
- Dimensions: 168 x 28 x 64 mm
- Product weight: 364 g (including short probe)
Standard magnetic suction cup (UT312A only), user manual.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT320A Digital Thermometer
This product comes with a 3-year warranty. The UT320A single-input digital thermometer offers accurate temperature measurement and a wide range of applications, whether in industry, research and education, or in the home. The package includes a temperature probe with a K-type thermocouple, but a J-type can also be used.
Product specifications:
- precise digital thermometer with UNI-T T01 temperature probe (type K)
- measurement in °C and °F, display of minimum, maximum and average temperatures
- sampling rate 4 times per second, wide range of applications, compact dimensions
Technical measurement parameters: °C: /> °C
Measurement range °C: -50 to 1300
Measurement range °F: -58 to 2372
Resolution: 0.1 °C / 0.2 °F
Measurement deviation: ± 0.5% + 1
Probe sampling frequency: 4xT per second T1 xT temperature probe: 4xT xT (Type K)
T01 probe measurement range: -40 to 260°C (-40 to 500°F)
Application of the T01 probe: common solid surfaces
The T01 probe is not suitable for measuring the temperature of liquids, gels and gases
For measuring other materials, probes T01, T03, T06 and T07 can be used
Minimum, maximum and average temperature
Data storage
Display backlight
Low battery warning
Automatic switch-off when inactive
Display dimensions: 37.4 x 36.4 mm
Dimensions: 120 x 53 x 28 mm AA (included)
Weight: 0.06 kg
Drop resistance: 1 m
Operating temperature: 0 to 40°C
Relative humidity: <80%
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT320D Digital Thermometer
This product comes with a 3-year warranty. The UT320D dual-input digital contact thermometer ensures accurate temperature measurement and a wide range of applications, whether in industry, research and education, or in the home. Two temperature probes with a K-type thermocouple are included, but the J-type can also be used.
Product specifications:
- precise digital thermometer with two inputs and two UNI-T T01 temperature probes (K-type)
- measurement in °C and °F, display of minimum, maximum and average temperatures
- Measurement of the difference between the two inputs, two-line display, 4x sampling frequency per second, compact dimensions
Technical parameters:
Units of measurement: °C / °F
Measuring range °C: -50 to 1300
Measuring range °F: -58 to 2372
Resolution: 0.1 °C / 0.2 °F Accuracy: ± 1% / ± 1 °F
Sampling frequency: 4 times per second
Attached temperature probes: 2 x UTI-T T01 (Type K)
T01 measurement range: -40 to 260°C (-40 to 500°F)
Use of the T01 probe: common solid surfaces; the temperature probes are not suitable for measuring liquids, gases or gels
For measuring other materials, UNI-T probes can be used: T03, T04, T05, T06, T07
Display of minimum, maximum and average temperature
Measurement of the difference between the two inputs
Data hold
Display backlight
Low battery warning
Auto-off when inactive
Display dimensions: 36.4 mm x 3
Dimensions: 120 x 53 x 28 mm
Power: 3 x AAA batteries (included)
Weight: 0.06 kg
Drop resistance: 1 m
Operating temperature: 0 to 40°C
Relative humidity
TR
Relative humidity
TR
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UNI-T UT320T 2-in-1 thermometer combines infrared and probe measurement. Infrared measurement is used to quickly detect the surface temperature of an object by measuring the infrared energy emitted by the target surface. Probe measurement can accurately measure the internal temperature of objects. It is widely used in the refrigeration, HVAC, automotive, construction and other industries.
Product parameters:
- 2-in-1 temperature measurement
- High accuracy
- Probe folds to 180°
- Max./Min./T1-T2>- Adjustable LCD emissivity/>-T2>- Backlit display
- Protection: IP54, drop resistance from 2 m
- Simple and compact design
- Thermometer applications: car maintenance, construction measurement, air conditioning maintenance, liquid measurement
Technical parameters:
Infrared measurement
- Measurement range: – – 40 °C: – – 30 °C (572 °F)
- temperature coefficient: ±0.1 °C / °C or ±0.1% °C, whichever is greater
- Distance-to-spot ratio (D:S): 8 : 1
- emissivity: 0.1 to 1.0 (adjustable)
- spectral range: 5 μm response time:
- μm⤤ 500 ms (95% reading)
- repeatability 1.0°C or 1.0% / 2°F or 1.0%, whichever is greater
- Laser: Class 2, single point, power <1 mW, wavelength 650±20 nm
- Operating time: approx. 30 h (laser and backlight activated)
Measurement with a probe
- Measurement range: -40 °C – 300 °C (-40 °F – 572 °F)
- Probe type: NTC
- minimum test depth: 12.7 mm
- Operating time: approx. 30 h (backlight on)
- FSTN LCD display, size 18 x 28 mm
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Storage temperature: -20°C to 60°C
- Operating humidity:
- Maximum operating humidity: <- 0% RH> Altitude: 2000 m
- IP54 protection rating
- drop test from a height of 2 m
- Automatic shut-off time: 10 min
- Data logger
- Measurement lock
- Unit conversion (℃/℉)
- Measurement: Max/Min/difference
- 4 x 2 x 2 x 2 mm
- Product weight: approx. 110 g (with batteries)
- power supply: 2 x 1.5 V AAA batteries (LR03)
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT325 Digital Thermometer
This product comes with a 3-year warranty. The UT325 device manufactured by UNI-T is a precision digital thermometer with two thermocouple inputs and contact temperature measurement. The device allows you to select three different temperature measurement units: °C / °F / K. A type K thermocouple probe rated up to +260 °C is supplied as standard with the instrument, but it is possible to purchase probes for measuring temperatures up to 1767 °C, for example the UNI-T T03 to T07. Up to 100 sets of measurements can be stored in the device’s memory and subsequently transferred via USB to a computer for further processing – data analysis using PC software. The device is powered by a 9V battery (6F22) or via USB from a computer.
Product specifications:
- high accuracy and the ability to connect to a PC at an affordable price
- 2 x 4-digit LCD displays
- temperature reading resolution: 0.1 °C; in the range ＞ 999.9 °C then 1 °C
- ability to connect thermocouples of types: K, J, T, E, R, S, N
- selection of units of measurement: °C / °F / K
- data storage: yes, for 100 sets of measurements
- data transfer via USB interface:
-; yes
- automatic calibration: yes
Technical parameters:
Temperature ranges // accuracy:
- Type K thermocouple: from -200.0 °C to +1372 °C // ± (0.2% + 0.6)
-210 °C type J: -20 °C to thermocouple C // ± (0.2% + 0.6)
- Type T thermocouple: from -250.0 °C to +400.0 °C // ± (0.2% + 0.6)
- Type E thermocouple: -150.0 °C to + 1000 °C // ± (0.2% + 0.6)
- Type E thermocouple: -150.0 °C to +1000 °C // ± 0.2%: Type R thermocouple 0.0 °C to +1767 °C // ± (0.2% + 2)
- Type S thermocouple: 0 °C to + 1767 °C // ± (0.2% + 2)
- Type N thermocouple: -200 °C to +1300 °C // ± (0.2% + 2)
- Type N thermocouple: -200 °C to +1300 °C // ± (0.2% + 2)
30 x 32 mm, 2 four-digit data points
- temperature reading resolution: 0.1 °C; in the range ＞ 999.9 °C then 1 °C
- selection of units of measurement: °C / °F / K
- automatic calibration: yes
- two probe inputs: yes
- MAX / MIN / AVG mode: yes
- High and low alarm: yes
- data logging
-
- PC transfer: yes, USB interface
- automatic backlight: yes, when working with USB connected
- automatic calibration: yes
- automatic switch-off: yes
- low battery indicator: yes
- Power supply: USB battery or 9V (6F22)
General product features:/
Product weight: 270 g
- Product dimensions: 175 x 85 x 30 mm
Contents of individual package:
- UT325 device: 1 pc
- 9V battery (6F22): 1 pc
- USB interface cable: 1 pc
- for PC
- 1 pc
Wholesale package contents:
- Standard quantity per box: 10 pcs
- standard box dimensions: 405 x 290 x 165 mm
- standard box weight: 4.3 kg
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT325F four-channel digital contact thermometer, which uses a thermocouple as a temperature probe, ensures accurate temperature measurement and is suitable for a wide range of applications, whether in industry, research and education, or at home. The package includes four temperature probes with a Type K thermocouple,
Product specifications:
- Suitable for K, J, T, E, R, S and N-type thermocouples
- Four temperature measurement channels are available. It can display the temperature difference between any two channels
- Users can set time intervals for automatic data logging
- Can store 72,000 data sets
- measurement in °C and °F, display of minimum, maximum and average temperatures
- Offset compensation can be set
- Can connect via Bluetooth to Android and iOS apps for control. Users can view recorded data, save and export graphs
- Can connect to PC software via USB for operation, and users can view recorded data, save and export graphs
Technical parameters:
- Measurement range:
Type K thermocouple: -200 °C to 13028 °C (2192 °F)
Type J thermocouple: -210 °C to 1200 °C (-346 to 2192 °F)
Type T thermocouple: -250 °C to 400 °C (-418 to 752 °F)
Type E thermocouple: -150 °C to 102 °C (150 °F)
Type R thermocouple: 0 °C to 1767 °C (-32 to 3212 °F)
Type S thermocouple: 0 °C to 1767 °C (-32 to 3212 °F)
Type N thermocouple: -200 °C to 1328 °C (2–328 °F)
- display resolution: 0.1 °C / °F / K (<1000), 1.0 °C / °F / K (≥1000)
- accuracy: ±(0.2% + 0.5 °C) / ±(0.2% + 0.9 °F) below -10 °C; basic + 2 °C; Type T below -200 °C: For reference only. Accuracy applies at an ambient temperature of 18 °C to 28 °C and does not include thermocouple error
- measurement deviation: ± 0.1% + 0.3 °C
- response time: approx. 500 ms - shutdown mode
- automatic measurement
- MIN / MAX / AVG
- Timed measurement: the recording interval can be set to 1 s–24 h for regular recording of measured data
- Backlight: on / off
- Data transfer: USB Type-C, Bluetooth
- low battery warning
- Drop resistance: 1m
- Operating temperature: approx. -10°C to 50°C (14°F to 122°F)
- Power supply: 3 x AAA batteries (included in the pack)
- contents: 4 x thermocouples, product, user manual
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT330T USB data logger features a large reusable storage capacity, real-time online measurement and a standard USB connector design. It can be plugged into a PC and data can be easily viewed or exported in PDF or XLS format. The logger is primarily intended for applications requiring high measurement accuracy and long-term temperature recording, such as food processing and cold chain transport,
Product parameters:
- 64,000 data storage groups
- Adjustable sampling interval
- Adjustable sampling interval
- IP65-rated automatic recording duration setting
- cyclic recording
- low battery indicator
- LED alarm
Technical parameters:
- Measurement range: -30 ~ 70 °C
- measurement accuracy: ±0.4 °C
- Protection: IP65
-1°C
-°C 64,000 groups
- cyclic recording support
- adjustable sampling interval: 10 s to 24 h
- unit/alarm setting: default unit °C; alarm type is divided into standard single/cumulative alarm, single alarm
- start mode: button/software (immediate, delayed, timer)
- recording delay: 0 min ～ 240 min (default 0), can be set via PC software
- Alarm delay: 0 s ～ software ～ ～ 10 Default auto-off: 10s
- power supply: CR2032
- display: 23 mm x 20 mm
- Net product weight: 41 g
- Product dimensions: 98 mm x 38 mm x 14 mm
Standard accessories: battery, stand, screws, stickers
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT330T USB data logger features a large reusable storage capacity, real-time online measurement and a standard USB connector design. It can be plugged into a PC and data can be easily viewed or exported in PDF or XLS format. The logger is primarily intended for applications requiring high measurement accuracy and long-term recording of temperature and humidity, such as medicines and foodstuffs that are prone to rapid deterioration during transport and storage.
Product specifications:
- 64,000 data storage groups
- automatic recording interval / adjustable LED settings /<br/
alarm
- alarm threshold value
- low battery indicator
- alarm mode setting
- auto-off
- USB interface
- °C / °F selection
Technical specifications:
- measurement range: -30 to 70 °C measurement accuracy: ± 0.1 °C
- protection: IP65
- resolution: 0.1°C
- Humidity: 0% RH ~ 99.9% RH ±2.5% RH
- resolution: 0.1% RH
- Humidity offset setting
- data storage: 64,000 records/cycle setting
- recording/setting range
Interval: 10 s to 24 h
- auto-off: 10 s
- power supply: CR2032
- display: 23 mm x 20 mm
- net product weight: 57.4 g
- product dimensions: 105 mm x 38 mm x 14 mm, accessories: battery, stand
Screw, battery holder
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT331+ and UT332+ measuring instruments measure temperature and humidity with high precision; they determine the dew point temperature and wet-bulb temperature. They allow you to set the system time and date and to store the measured data in memory, either manually or automatically at set intervals. The measured data can subsequently be exported to computer software for further analysis. These meters can be used in factories, the food industry, healthcare, laboratories, environmental protection and other fields. The devices contain a high-precision sensor and a low-power microprocessor; 4 x 1.5V AAA alkaline batteries are sufficient for power supply. The UT332+ differs from the UT331+ in terms of higher accuracy and greater data storage capacity.
List of features:
- Temperature measurement in the range -20 °C to 70 °C with a resolution of 0.1 °C
- Humidity measurement in the range of 1% RH with a resolution of 10% RH
- Measurement response time approximately 1 second
- choice of units: °C or °F
- display of minimum and maximum values
- large backlit display
- Alarm setting with red or blue backlit display
- Measurement hold function
- System time setting
- Data storage interval
- manual or 60-second interval data storage for 299 data groups
- Dew point temperature measurement
- wet-bulb temperature measurement
- powered by 4 x 1.5V AAA alkaline batteries
- USB data cable for transferring measured values to a PC
- ability to display measured data on a PC in real time, with a +5V power supply PC specifications:
- temperature measurement range: -20.0 °C to 70.0 °C, measurement accuracy ± 0.5 °C
- dew point temperature measurement range: -78.2 °C to 70.0 °C, measurement accuracy ± 1 °C
- temperature measurement range, °7 °C, thermometer: -21 °C to 60 °C, measurement accuracy ± 0.5 °C
- Humidity measurement range: 0 to 99.9% RH, measurement accuracy within the range of 10% to 90% RH is ± 3%, outside this range the accuracy is ± 3.5%
- temperature resolution: 0.1 °C, humidity
-1 RH
- display: multi-line LCD, backlit, dimensions 26.5 x 35.5 mm
- alarm setting: lower temperatures indicated in blue and higher temperatures in red
- data storage: for 299 data sets
- power supply: 4 x 1.5V AAA alkaline batteries, automatic switch-off
-; product dimensions: 185 x 54.8 x 33.8 mm
- product weight: 130 g
Contents of individual package:
- UT331+ device: 1 pc
- USB data cable: 1
- 1.5V AAA battery (R/03/>
):
- standard quantity per box: 10 pcs
- Standard box dimensions: 280 x 275 x 230 mm
- Total weight of the box: approx. 3.7 kg
Manufacturer:
https://www.uni-trend.com/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT331+ and UT332+ measuring instruments measure temperature and humidity with high precision; they determine the dew point temperature and wet-bulb temperature. They allow you to set the system time and date and to store the measured data in memory, either manually or automatically at set intervals. The measured data can subsequently be exported to computer software for further analysis. These meters can be used in factories, the food industry, healthcare, laboratories, environmental protection and other fields. The devices contain a high-precision sensor and a low-power microprocessor; 4 x 1.5V AAA alkaline batteries are sufficient for power supply. The UT332+ differs from the UT331+ in terms of higher accuracy and greater data storage capacity.
Parameters:
- Temperature measurement in the range -20 °C to 70 °C with a resolution of 0.1 °C RH
- measurement response time approximately 1 second
- choice of units: °C or °F
- display of minimum and maximum values
- large backlit display
- Alarm setting with red or blue backlit display
- Measurement hold function
- System time setting
- Data storage interval
- manual or 60-second interval data storage for 999 data sets
- Dew point temperature measurement
- wet bulb temperature measurement
- powered by 4 x 1.5V AAA alkaline batteries
- USB data cable for transferring measured values to a PC
- option to display measured data on a PC in real time, with a +/5V power supply PC specifications:
- temperature measurement range: -20.0 °C to 70.0 °C, measurement accuracy ± 0.3 °C
- Dew point temperature measurement range: -78.2 °C to 70.0 °C, measurement accuracy ± 0.8 °C
- Temperature measurement range: 7 °C
- 21 °C to 60 °C, measurement accuracy ± 0.3 °C
- Humidity measurement range: 0 to 99.9% RH; measurement accuracy within the range of 10% to 80% RH is ±2%, outside this range the accuracy is ±2.5%
- Temperature resolution: 0.1 °C, humidity
-1 RH
- display: multi-line LCD, backlit, dimensions 26.5 x 35.5 mm
- alarm setting: lower temperatures indicated in blue and higher temperatures in red
- data storage: for 999 data sets
- power supply: 4 x 1.5V AAA alkaline batteries, product dimensions
-8 x 5
- 33.8 mm
- Product weight: 130 g
Contents of individual package:
- UT332+ device: 1 pc
- USB data cable: 1 pc
- 1.5V AAA battery (R03): 4 pcs
- Standard
box: 10 pcs
- Standard box dimensions: 280 x 275 x 230 mm
- Total box weight: approx. 3.7 kg
Manufacturer:
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT333 Mini Temperature and Humidity Meter
This product comes with a 3-year warranty. UNI-T UT333 Mini Temperature and Humidity Meter
SPECIFICATIONS
Temperature range -10°C to 60°C
Temperature accuracy: ±1°C
Temperature resolution 0.1°C
Humidity range 0–100% RH
Humidity accuracy ±5% RH
Humidity resolution 0.1% RH
Sampling rate 1/s
FEATURES
Data logging
Automatic battery shut-off
MAX indication/Disabled
Auto power off
Mode
MIN mode
LCD backlight
On/Off
Overload Indication
°C/°F unit selection
GENERAL FEATURES
Power 1.5V Battery (AAA*3)
LCD size 32x26mm
Product dimensions
Weight
Dimensions 155x50x28mm
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT333S Mini Thermometer and Hygrometer
This product comes with a 3-year warranty. The UT333S is a precise, safe and reliable digital thermometer with a hygrometer and compact dimensions. The display is split and shows the temperature and humidity readings simultaneously, facilitating measurement in various conditions and environments. It is widely used in grain storage, transport, archives, materials processing, forestry, animal husbandry, healthcare, educational institutions, the public sector and households.
Product specifications:
- Accurate digital thermometer and hygrometer in a single device
- Split digital display, flexible coiled cable
- 1-second sampling frequency, wide range of applications, compact size
Technical specifications:
Temperature measurement: °F/> Units of measurement: °C
Measuring range °C: -10 to 60
Measuring range °F: 14 to 140
Resolution: 0.1 °C / 0.2 °F
Measurement deviation: ± 1.0 °C / 2.0 °F
Measurement range:
0.0 °F
Measurement range:
0.0 °C humidity
Resolution: 0.1% relative humidity
Measurement deviation: ± 5%
Other functions:
Min. and max. values
Data hold
Overload indication
Display backlight
Low battery warning
Auto-off when idle
Display dimensions: 32 x 35 mm
Dimensions: 110 x 53 x 26 mm
Power: AAA
Battery life: 3 x AAA
1 m
Operating temperature: 0 to 40°C
Altitude: 2000 m
Pollution class: 2
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT334A Geiger counter is a compact detector used for monitoring beta (β), gamma (γ) and X-rays. The device is highly sensitive and accurate. It is equipped with a high-performance microprocessor and a 2.0-inch TFT colour screen, making it convenient to use. The device is equipped with audible and visual alarms. The alarm threshold values can be set; when these thresholds are reached, the counter triggers an alarm. The main specifications comply with international standards.
The UT334A is suitable for use in radiation processing enterprises, healthcare and epidemic prevention, radiotherapy, nuclear laboratories, nuclear power stations, building materials inspection, petrochemicals, geological exploration, steel scrap production, industrial non-destructive testing and other environments where ionising radiation is present, to monitor radiation dose and protect people.
>
Parameters:
- Portable device
- 2.0” TFT colour display
- Highly sensitive GM detector
- combined beta (β), gamma (γ) and X-ray radiation
- real-time display, average and cumulative dose
- Audible and visual alarms, monitoring with two adjustable alarm modes
Storage
- calibration function
- option to display the time since the start of the current measurement
- measurement recording time (00-999h)
- Over-limit alarm
- saving of the last ten measurement records
- the device can operate the stopwatch even when switched off
- battery charge status display
- warning: (display: ‘Device damaged’)
- if the radiation dose exceeds the threshold set in standby mode, the device will automatically trigger an alarm and enter the measurement interface.
Technical parameters:
- detected radiation: X, β and γ
- sensor: GM tube:
05u:
05u -50mSv
- Accuracy: -17% ~ +25% based on 137Csγ
- Type-C charging interface
- Alarm response time td: <10s
- alarm threshold accuracy: -17% ~ +25%
- Alarm modes: audio and visual: 7 alarms Li-ion: 3. 1800 mAh battery
- Battery life: approx. 20 days (continuous measurement, particle sound off)
- Product colour: red and grey
- net product weight: 127 g
- Product dimensions: 120 x 65 x 25 mm
- standard accessories: USB cable, manual, standard carrying case
Box: 10 pcs
- Weight (per box): 3.7 kg
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UNI-T UT336A is an electronic refrigerant leak detector with a negative corona discharge, characterised by a rapid response, high reliability and ease of use. It is widely used in air conditioning maintenance, vehicle maintenance, refrigeration unit detection, fridge maintenance, etc.
Product specifications:
- high sensitivity and the ability to detect small leaks
- easy to use
- six-level sensitivity setting, suitable for various scenarios with different leak conditions, six-level visual leak signal, intuitive visual signal
in yellow, orange and red
- automatic reset (current status is reset to zero)
- three main types of halogenated refrigerants: CFC, HCFC, HFC
Technical parameters:
- maximum sensitivity 3g/a
- warm-up time 3s
- Sensor setting: negative sensitivity
light)
- alarm light: 6 levels (yellow/orange/red light)
- battery status indicator
- Reset
- Sound mute
- battery life: 20 hours
- auto-off
- probe life: approx. 50 hours under normal detection conditions
- operating temperature and humidity: 0 °C to 50 °C ＜95%RH (non-condensing)
- power supply: 4 x AA (R06) alkaline batteries (included)
- Product dimensions: 190 x 65 x 43 mm (net product weight: 65 x 43 mm)
- 312 g (excluding battery)
- Standard quantity per box: 10 pieces
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UNI-T UT336B refrigerant leak detector is designed with a high-sensitivity semiconductor sensor, offering fast response, high detection accuracy, high reliability, ease of use, etc. The light probe features a creative design and tracks colour changes in the equipment in real time. The detector is widely used in the refrigeration industry for air conditioning maintenance, vehicle repairs, refrigeration equipment inspection, fridge maintenance and in other areas where refrigerants are used.
Product parameters:
- high sensitivity and ability to detect small leaks
- easy to use
- long sensor life
- Adjustable sensitivity settings for various scenarios, suitable for six levels of leakage concentration
- six-level audible and visual alarms, with intuitive indication via yellow, orange and red LEDs
- automatic reset (current status is reset to zero)
- three main types of halogenated refrigerants: CFC, HCFC, HFC
Technical parameters:
- maximum heating sensitivity 3/6/6 sensitivity adjustment: 6 levels (green indicator light)
- alarm indicator light: 6 levels (yellow/orange/red indicator light)
- battery status indicator
- reset
- probe indicator light: green when no alarm is detected; note the change in the alarm light colour when an alarm is detected
- automatic shut-off
- 10-hour battery life
- Probe: service life: approx. 2 years (calculated for 2.5 hours per day)
- Operating temperature and humidity: 0 °C to 50 °C, <95% RH (non-condensing)
- Power supply: 4 x AA alkaline batteries (R06) (included)
- Product dimensions: 190 x 4 x 36 mm (including product rod)
- Weight: 282 g (without batteries)
- Standard carton quantity: 5 pcs
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT343A is a high-precision paint thickness gauge capable of measuring paint thickness on ferrous (ferromagnetic) and non-ferrous (paramagnetic and diamagnetic) metals.
Electrically non-conductive or conductive coatings on ferromagnetic metals, such as steel, can be measured through galvanised or electromagnetic steel (e.g. galvanised or electro-galvanised steel). induction (the instrument setting symbol is Fe), which measures the paint thickness based on the amount of magnetic flux flowing from the sensor through the non-ferromagnetic paint onto the ferromagnetic substrate.
You can measure the thickness of non-conductive paints on non-magnetic metallic materials, such as aluminium or copper, using the Eddy current measurement method (instrument setting symbol NFe). The principle involves measuring the differences in eddy currents generated by the instrument in a non-magnetic metallic substrate.
This device features high-precision, non-destructive paint thickness measurement, single-point and multi-point averaging algorithms, and rapid measurement. Automatic detection of substrate type, wide thickness measurement range from 0 to 1850 μm, automatic conversion of units from μm to mils. Ability to store up to 199 measurement groups in memory. Simple multi-point calibration using the included calibrated samples.
Widely used in metal production and processing, aviation, marine engineering, rail transport, scientific research, quality control and non-destructive testing in the automotive industry and other industries in laboratories, workshops and outdoor areas.
Product parameters:
Paint measurement range from 170 μm thickness
- Measurement accuracy: ± (3% of the measured value + 1 μm)
- resolution: 0.1 μm
- operating modes: automatic substrate detection, Fe, NFe
- Measurement type: single or continuous
- statistical measurement: MAX / MIN /-> automatic setting of screen value average values on screen
-> limits: yes, in the range 0 to 1750 μm, including indication of limit exceedance
- built-in memory: yes, for 199 measurement groups
- Switchable buzzer: yes
Technical parameters:
- measurement frequency:
- 5 seconds ref. sensor for electromagnetic induction and eddy currents
- Paint thickness measurement range: 0 to 1750 μm
- measurement accuracy: ± (3% of the measured value + 1 μm)
- resolution: 0.1 μm
- Probe contact force: 0.3 to 1.5 N
- Data display type: automatic switch-off
- Yes, after 5 minutes of inactivity
- impact resistance: the device withstands a fall from 1 metre
- power supply: 2 x AAA alkaline batteries
- Standby power consumption: ≤ 5 µA
- current consumption in operation: ≤80mA, at warning ± 3 V
-3. 0.2 V, the battery symbol will start flashing
- operating environment: 0 °C to 40 °C, ≤80% relative humidity
- Storage environment: -20 °C to 60 °C, ≤80% relative humidity
- Dimensions: 117 x 53 x 37 mm
weight:
including 11g certification: CE, UKCA
Contents of each pack:
- UT343A device: 1 pc
- Sensor cover: 1 pc
- Standard sheets with calibrated paint thicknesses: 1 set (5 pcs)
- Iron calibration base: 1 pc
- Non-ferrous substrate: 1 pc
- 1 pc. AAA alkaline battery: 2 pcs
- user manual: 1 pc
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT343D Coating Thickness Tester
This product comes with a 3-year warranty. The UT343D coating thickness gauge can measure the thickness of coatings on ferrous and non-ferrous materials. This device is designed with a unique quick-test feature, allowing users to set a thickness range and use a 3-colour LED and an audio alarm to quickly determine whether the tested coating falls within the preset range, greatly increasing work efficiency.
The UT343 display rotates automatically. This CE-certified device can store up to 500 sets of data for further analysis via the included PC analysis software.
Applications:
It is widely used in manufacturing, metalworking, aerospace, marine engineering, rail transport, scientific research, quality control and other industries.
Specifications
Measurement range: 0–1250 µm
Accuracy: ±(3%H+1) µm
Resolution: 0.1 µm (0–99.9 µm); 1 µm (100–1250 µm)
Measurement method: Single/Continuous
Measurement mode: Max/Min/Avg
Metal type: ferrous/non-ferrous
Features
Display type: 2.0-inch TFT LCD (brightness) (243,200 pixels) control: √
Automatic screen rotation: √
Unit conversion: √
Audio alarm: √
LED alarm: √
PC analysis software: √
USB communication: √
Quick test mode: √
Automatic data group shutdown:
0 √
Low battery indicator: √
General features
Power: 3V battery (R03) x 2
Display: 48mm x 36mm
Product colour: red and grey
Net product weight: 175g.<br/x15mm.
63 mm. 41 mm
Standard accessories: micro USB interface cable, standard earpiece, batteries, cloth pouch
Standard individual packaging: gift box, manual
Standard quantity per box: 10 pcs.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT352 Data-Logging Sound Level Meter This product comes with a 3-year warranty. The UT 352 sound level meter is a high-quality device for measuring sound levels in environmental monitoring, healthcare and industrial applications. It features a sensitive condenser microphone with a frequency range of at least 31.5 Hz to 8000 Hz. You can choose to take measurements based on the physiological sensitivity curve of the human ear (A) or the machine noise measurement curve (C). The noise measurement range can be switched between four sub-ranges from 30 dB to 130 dB, and it is also possible to select either a fast response time of 125 ms or a slow response time of 1 s. The analogue outputs allow direct sound output with a voltage level of 0.707 V or DC voltage, the magnitude of which varies in proportion to the noise level at 10 mV/dB (2 V over the full range). Measured data can be stored in the internal memory (up to 63 measurement sets). Very low power consumption allows for continuous measurement for up to 20 hours, but also allows for power supply from an external source. Low battery indication when the voltage drops to 4.8 V.
Product parameters:
- sound pressure level measurement from 30 to 130 dB- measurement accuracy across all ranges ± 1.5 dB- Measurement frequency range: 31.5 Hz to 800,000 Hz - Option to select measurement mode: 800000 Hz (curve mode) / A (ear) / C (machine)- measurement response time 125 ms or 1 s- Measurement time on a single set of batteries: up to 20 hours- backlit display- 30-division analogue indicator- storage of measured data
Technical data
technical parameters for sound pressure at 3/3 130 dB- measurement ranges 30 to 80 dB, 50 to 100 dB, 60 to 110 dB, 80 to 130 dB- measurement accuracy across all ranges ± 1.5 dB- optional manual or automatic switching of the measurement frequency range 810 Hz- option to select A-weighting (ear) / C-weighting (machine)- measurement response time 125 ms or 1 s- 30 ~ 130 dB analogue bargraph display- analogue audio output of 0.707 V at 600 Ω impedance - analogue output at 2 mV DC/dB – full range of 10 mV DC/dB at 100 Ω impedance- max/min display mode- Alarm for exceeding the range ‘OVER’, below the range ‘UNDER’- Data hold on the “Data Hold” display- storage of up to 63 data sets- optional automatic switch-off (Sleep Mode)- powered by 4 batteries / battery indicator 165V LR 165 V. Voltage drops to 4.8V- Measurement time for a set of batteries up to 20 hours- option to power from an external source- 53 x 41 mm backlit display- dimensions 273 x 70 x 39 mm- weight 330 g>
UT 352 level gauge: 1 pc- display cover - glass: 1 pc- 1.5V battery (AA, LR6): 4 pcs- padded packaging: 1 pc- English manual: 1 pc
Packaging for wholesale customers/box:- 30 pcs- standard box dimensions: 670 mm x 385 mm x 300 mm (0.077 CBM per standard box)- gross weight of the box: approx. 18 kgor- standard quantity per box: 10 pcs- standard box dimensions: 670 mm x 415 mm x 120 mm- gross weight of box: approx. 7.3 kg
MANUFACTURER: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT353 Sound Level Meter This product comes with a 3-year warranty.
The UT 353 sound level meter is a high-quality digital sound level meter for environmental monitoring, healthcare measurements and industrial noise monitoring. It converts ambient sound into an electrical signal and displays the results on the LCD. It can continuously monitor ambient sound. It features a sensitive 1/2-inch condenser microphone with a frequency range of at least 31.5 Hz to 8000 Hz. Measurement is in accordance with the physiological sensitivity curve of the human ear (A). The noise measurement range is from 30 dB to 130 dB, with a resolution of 0.1 dB and an accuracy of ± 1.5 dB. You can choose a response time of 125 ms or a slow 1 s. Very low power consumption from 3 x 1.5V batteries (R03).
Product specifications:
- Sound pressure level measurement: 30 to 130 dB- measurement accuracy ± 1.5 dB- Measurement frequency range from 31.5 Hz in physiological mode- 0.5 dB- Human ear sensitivity curve (A)- Measurement response time 125 ms or 1 s- backlit display
Technical parameters:
- sound pressure level measurement 30 to 130 dB- resolution 0.1 dB- Measurement accuracy- 1.5 dB- Measurement frequency range: 31.5 Hz to 8000 Hz- Human ear physiological sensitivity curve mode (A)- measurement response time 125 ms or 1 s- max/min display mode- ‘Overload’ data indication (OL) z display- automatic switch-off (Sleep Mode)- Powered by 3 x 1.5 V batteries (R03)- low battery indicator- 32 x 26 mm white backlit display- dimensions 150 x 52 x 27 mm- weight 116 g>
UT 353 level gauge: 1 pc- display cover - glass: 1 pc- 1.5V battery (AAA, R03): 3 pcs- Padded packaging: 1 pc- Manual in Czech and English: 1 pc
Packaging for wholesale customers/box:- 40 pcs- standard box dimensions: 505 x 330 x 280 mm- gross weight of box: approx. 8.42 kg
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT361 Anemometer
This product comes with a 3-year warranty. The UNI-T UT361 anemometer is a small, stable and reliable handheld instrument for measuring wind speed and temperature, featuring a separate speed sensor that ensures rapid detection, low power consumption and high accuracy. The anemometer allows automatic measurement at predetermined intervals of 0.5 to 255 seconds and stores up to 2044 readings in its internal memory. Large backlit display (57 mm x 37 mm) showing wind speed and temperature simultaneously.
The device can be used in many fields – such as mining, petrochemicals, energy, navigation – in aviation and maritime transport, in the manufacture of fans or the installation of exhaust and air recovery ventilation systems, as well as in sport. Powered by a 9V alkaline battery, with automatic switch-off after approximately 10 minutes of inactivity, which can be disabled.
Product specifications:
- wind speed measurement range: 0 ~ 30 m/s
- the instrument and the measuring handle are connected by a cable
- with high-precision anemometer tip
- reliability
- wide selection of wind speed units (VEL): (m/s, km/h, ft/min, MPH, KNOTS)
- Selection of wind flow units (FLOW): CMM (cubic metres per second), CFM (cubic feet per minute)
- wind speed measurement modes: MAX, MIN, real-time
, MAX, wind flow mode
, MAX, MAX, MAX2, MAX, real-time MAX
- temperature measurement range: 10°C ~ 40°C
- unit selection: °C or °F
- Display backlight: yes
- Data Hold: yes
- automatic interval recording function: 0.5 to 255 s
- Data storage: up to 204/4
Technical specifications
Parameters:
- Wind speed measurement range: 2 m/s to 10 m/s, resolution 0.1 m/s, accuracy ± (3% of reading + 0.5)
- wind speed measurement range: 10 m/s to 30 m/s, resolution 0.1 m/s, accuracy ± (3% of wind measurement): flow measurement
-8% (3.MM) 0.001 to 9999 x 100
- Airflow measurement (CFM): 0.001 to 9999 x 100
- sampling frequency: approx. 2 measurements per second
- temperature measurement range: 10°C ~ 40°C, resolution 0.1°C, accuracy ± 3°C (32°F ~ 104°F, resolution 0.2°F, accuracy ± 4°F
- measurement of maximum, minimum or average values: MAX / MIN of the wind sensor type based on the wind sensor display principle: MAX / MIN. magnetic induction
- temperature sensor type: negative temperature coefficient, NTC
- measurement pause: HOLD is displayed
- data storage: 2044 records
- display backlight: yes, can be switched on/off
- auto-off: yes, after 10 minutes of inactivity; continuous operation can be disabled when low battery voltage is detected (up to ≤ 7.2V)
- battery powered: 1 x 9V (6F22)
- device dimensions: 162 mm x 78 mm x 30 mm
- device weight: 375g
- Product colour: red and grey
- Operating temperature and humidity: 0°C to 2°C (~32°F), humidity below 75%
- Storage temperature and humidity: -20°C to 65°C (-4°F to 149°F) (relative humidity less than 75%)
- Pressure: 500 mbar to 2 bar
Package contents:- UT anemometer:- UT:- UT 6 1pc
- 9V battery (6F22): 1 pc
- user manual: 1 pc
Wholesale packaging:
- standard quantity per box: 10 pcs
- Standard box dimensions: 460 mm x 335 mm x 210 mm Gross box weight: 8 kg
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT362 USB Anemometer
This product comes with a 3-year warranty. The UNI-T UT362 USB anemometer is a small, stable and reliable handheld instrument for measuring wind speed and temperature, featuring a separate speed sensor that ensures rapid detection, low power consumption and high accuracy. The anemometer allows automatic measurement at predetermined intervals of 0.5 to 255 seconds and the storage of values in the internal memory for up to 2044 records, with subsequent transfer to a computer via the USB interface. Large backlit display (57 mm x 37 mm), showing wind speed and temperature simultaneously.
The device can be used in many fields – such as mining, petrochemicals, energy, navigation – in aviation and maritime transport, in the manufacture of fans or the installation of exhaust and air recovery ventilation systems, as well as in sport. Powered by a 9V alkaline battery, with automatic switch-off after approximately 10 minutes of inactivity, which can be deactivated.
Product specifications:
- wind speed measurement range: 0 ~ 30 m/s
- the instrument and the measuring handle are connected by a cable
- with high-precision anemometer tip
- reliability
- wide selection of wind speed units (VEL): (m/s, km/h, ft/min, MPH, KNOTS)
- Selection of wind flow units (FLOW): CMM (cubic metres per second), CFM (cubic feet per minute)
- wind speed measurement modes: MAX, MIN, real-time
, MAX, wind flow mode
, MAX, MAX, MAX2, MAX, MAX in real time
- temperature measurement range: 10°C ~ 40°C
- unit selection: °C or °F
- Display backlight: yes
- Data Hold: yes
- automatic interval recording function: 0.5 to 255 s
- Data storage: up to 204/4 records per PC storage yes
Technical parameters:
- Wind speed measurement range: 2 m/s to 10 m/s, resolution 0.1 m/s, accuracy ± (3% of reading + 0.5)
- wind speed measurement range: 10 m/s to 30 m/s, resolution 3%, measurement accuracy ± (3% of reading +0.8)
- wind flow measurement (CMM): 0.001 to 9999 x 100
- wind flow measurement (CFM): 0.001 to 9999 x 100
- Sampling rate: approx. 2 measurements per second
- Temperature measurement range: 10°C ~ 40°C, resolution 0.1°C, accuracy ± 3°C (32°F ~ 104°F, resolution 0.2°F, accuracy ± 4°F
- measurement of maximum, minimum or average values: MAX / MIN of the wind sensor type based on the wind sensor display principle: MAX / MIN. magnetic induction
- temperature sensor type: negative temperature coefficient, NTC
- measurement pause: HOLD is displayed
- data storage: 2044 records
- USB interface: yes
- display backlight: yes, can be switched on/off
- Auto-off: yes, after 10 minutes of continuous operation / disabled - Battery indicator: when voltage drops to ≤ 7.2V
- battery powered: 1 x 9V (6F22)
- device dimensions: 162 mm x 78 mm x 30 mm
- device weight: 375g
- product colour: red and grey
- operating temperature and humidity: 0°C to 35°C (32°F to 122°F), (relative humidity less than 75%)
- Storage temperature and humidity: -20°C to 65°C (-4°F to 149°F) (relative humidity less than 75%)
- pressure: 500 mbar to 2 bar
Contents:
UNI 2T USB pack
- 9V battery (6F22): 1 pc
- USB interface cable: 1 pc
- CD with PC software
- User manual
Wholesale packaging:
- Standard quantity per box: 10 pcs
- Standard box dimensions: 460 mm x 2135 mm, gross weight: 6.8 kg
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT362H is a hot-wire anemometer, ideal for measuring air velocity and air temperature, thanks to its high stability, safety and excellent reliability. The device features automatic air flow calculation, allowing users to measure and record data in both indoor and outdoor applications.
Measuring indoor air velocity and airflow is an important indicator for assessing air quality. Thanks to its slim, extendable probe, the UT362H is extremely useful for HVAC/R professionals, facilitating air measurement inside ventilation ducts.
The device can be used in a wide range of sectors, such as:
mining
petrochemicals
the energy sector
maritime
aviation and shipping
fan manufacturing
air conditioning systems
ventilation systems
Key features
Extendable aluminium alloy rod, lightweight and durable
Separate design with retractable probe for easy measurements
Platinum resistance sensor
Storage of up to 99 data sets
Precise measurement of low air flows
Mode for measuring volumetric flow in ducts
Lightweight, ideal for professional use
Technical specifications
Air velocity measurement
0 ~ 30 m/s, accuracy ±(4% + 0.1 m/s)
0 ~ 108 km/h, accuracy ±(4% + 0.4 km/h)
0 ~ 5906 ft/min, accuracy ±(4% + 20 ft/min)
0 ~ 11 Bft, accuracy ±(1 Bft)
Air flow measurement
0 ~ 999,900 m³/min (resolution 0.001 ~ 100)
0 ~ 999,900 CFM (resolution 0.001 ~ 100)
0 ~ 999,900 L/s (resolution 0.001 ~ 100)
Temperature measurement
Range: -20 ~ 70 °C
Resolution: 0.1 °C
Accuracy: ±0.5 °C
Range in °F: 32 ~ 158 °F
Resolution: 0.1 °F
Accuracy: ±1.5 °F
Additional functions
Supported pipe shapes: circular, rectangular, flat
Dimension settings for rectangular sections (width & height)
Units of measurement:
Area: m², ft²
Air flow rate: m³/min, CFM, L/s
Air velocity: m/s, ft/min, km/h
Temperature: °C / °F
Start-up warm-up time: 5 seconds
Measurement mode: fast / slow
Sampling time: 0.5 s
Data Hold function
Display of MAX / MIN / average / multi-point average values
Internal memory: 99 data sets
Backlit LCD screen
Automatic switch-off after 5 minutes of inactivity (can be disabled)
Flexible probe length: 120 cm
Low battery indicator
Operating conditions
Operating temperature: 0 ~ 40 °C
Operating humidity: ≤80% RH
Storage temperature: 0 ~ 40 °C
Storage humidity: ≤80% RH
Power supply and dimensions
Power supply: 3 × 1.5V AAA batteries (included)
Dimensions: 180.3 × 63.0 × 40.1 mm (main unit)
Weight: approx. 312 g (excluding batteries)
