Search results for "uni-t"

UNI-T UT801 Digital Bench Multimeter This product comes with a 3-year warranty. SPECIFICATIONS: DC voltage: 200mV/2V/20V/200V/1000V +/- (0.5%+2) AC voltage: 2V/20V +/-/0V/-/0V (0.8%+3) DC currents: 200μA/2mA/20mA/200mA/10A +/- (0.8%+2) AC currents: 2mA/20mA/200mA/10A +/- (1.0%+3) Resistance: 200 Ω/2 kΩ/20 kΩ/200 kΩ/2 MΩ/20 MΩ ± (0.8%+3) Capacitance: 20nF/2uF/200uF +/- (4%+3) Frequency: 2kHz/+3%: temperature SPECIAL FUNCTIONS: Transistor Off mode Diode Continuity buzzer Display backlight REL Sleep mode Max/Min Display for maximum/minimum battery voltage Measurement: >10 MW Data hold Max. Display: 1999 GENERAL FEATURES: Power supply: AC220V/50Hz or 6 x 1.5V batteries (R14) LCD size: 108 x 35mm Product colour: red and grey Net product dimensions: Product weight: 1000g 245 x 105 mm Standard accessories: test lead, AC220V power cable, English manual, contact probe, temperature probe, multi-function socket /en/

Read more less

This product comes with a 3-year warranty. The UPO1202 series digital phosphor oscilloscope features the innovative UNI-T Ultra Phosphor 2.0 with an improved new design and deep storage function, high-speed waveform acquisition, real-time waveform recording and playback, and a 256-gradation display. The series supports the DVM module, rich trigger and bus decoding functions, and supports real-time hardware decoding with full memory. It is widely used in many fields, including embedded system design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development, and education. 2.0: Normal waveform capture rate of up to 100,000 wfms/s; in Fast Acquire mode, the waveform capture rate reaches 500,000 wfms/s - Long recording memory length: 56 Mpts of recording memory for full-frequency data at high sampling rates 2.0: Multi-Scopes 2.0 can separate the time base and voltage grid of two channels, allowing users to observe two completely different signals simultaneously in the same window. (RS232/UART, I2C, SPI) milliseconds, which is 100 times faster than traditional software decoding and significantly improves analysis efficiency Technical parameters: - Oscilloscope type: digital - Power supply: 100V–240V AC, 50/60 Hz Bandwidth: 200 MHz - Real-time sampling rate: 1 GSa/s - Rise time: ≤1.8 ns - Recording memory length: 56Mpts - Input impedance: 1MΩ/16pF - Input sensitivity: 500 µV/V/div... RS232, UART, I2C, SPI - Triggering: rising edge, Nth edge, window, pattern, runt, falling edge, delayed, pulse width, slope, timeout, video signal - Time base: 1n...1pc/div - Vertical resolution: 8 bits >- LCD display type is not optional; 7" - Shipping dimensions (L x W x H): 336 mm × 164 mm × 105 mm - Shipping weight: <2.5 kg Package contents: - power cable - USB 2.0 cable - 100MHz probe*2 (UT-P> ) UNI-T SOFTWARE & FIRMWARE https://instruments.uni-trend.com/products/digital-oscilloscopes/UPO1002

Read more less

This product comes with a 3-year warranty. The UT301D+ non-contact thermometer is a durable and easy-to-use infrared thermometer offering high accuracy (95%), energy efficiency and repeatability. It features an adjustable visual/audio high and low temperature alarm with a response time of less than 250 ms, helping you to quickly detect anomalies. You can preset and save 5 sets of emissivity values and quickly switch the emissivity setting for different surfaces to achieve more accurate results. With measurement hold, MAX/MIN/AVG/DIFF hold and tripod mounting, the UT301D+ is ideal for processes requiring temperature monitoring. The UT301D+ can be used for the inspection of power distribution/transmission equipment, HVAC/equipment maintenance, vehicle troubleshooting and other applications. Backlit EBTN colour display. Can be attached to a tripod with a standard threaded socket. Product specifications: - Measuring range: -32 to 600 °C - Units of measurement: °C/°F - ratio of measurement distance to measurement area diameter: 1 emissivity option - 12 surface emissivity options: 0.1 to 1.0 - large multi-line LCD display EBTN 30 x 30 mm - dual laser - storage of 99 groups of temperature measurements - date and time display - User-defined visual and audible alarm - Not for medical use Principle: lines that converge at the point where the thermometer measures the temperature. The lasers intersect exactly at the measurement point, allowing for precise targeting. Advantages: the dual laser helps to focus on a specific point, which is useful for measuring smaller or more distant areas. Usage: suitable for applications where high precision is required and where the measured area is smaller (e.g. industrial inspection or measurement of small technical components). Parameters: - laser power: <1mW (Class 2) - display size: 30 x 30 mm - Temperature measurement range: -32 °C to 600 °C (-25.6 °F to 1112 °F) - D:S ratio: 12 : 1/90% emissivity: - (adjustable, stores 5 preset values) - response time: ≤ 250 ms (95% measurement) - spectral response: 8 μm – 14 μm - Accuracy >0°C: ± 1.5°C or ± 1.5%°C - accuracy ± 0°C ±°C + 0.1°C /°C) - accuracy >32°F: ± 3.0°F or ± 1.5% - accuracy ≤32°F: ± (3.0°F + 0.1°F /°F) - measurement repeatability: 0.7°C or 1.0.7% or 0.7°F hold: yes - data storage: yes, 99 groups - Scheduled measurement: yes - auto-off: yes - Low battery indicator: yes - LED alarm: yes for high/low temperature - Audible warning: yes for high/low temperature - Tripod measurement mode - Tripod measurement mode: / AVG / DIFF / Hold - Operating temperature: 0°C to 50°C (32°F to 122°F) - Storage temperature: -20°C to 60°C (-4°F to 140°F) - Operating humidity: <90% RH (non-condensing) Drop test: / battery - Product colour: red and grey - net product weight: 204 g - Product dimensions: 160 mm x 74 mm x 48 mm Standard individual package contents: - box - UNI-T UT301D++ carrying case -/ user manual -/

Read more less

This product comes with a 3-year warranty. The UNI-T UT311A is a portable vibration tester, equipped with an acceleration sensor and a digital display circuit, designed to measure the acceleration, velocity and displacement of vibrations in mechanical equipment. The device stands out for its wide measurement range, simple operation and high portability. It is widely used in inspection and maintenance activities in sectors such as the mechanical, energy, chemical, metallurgical and aeronautical industries, as well as in many other industrial applications. It is an ideal tool for the technical inspection and maintenance of rotating equipment: fans, pumps, compressors, motors, etc. Key features Measurement of acceleration, velocity and displacement of vibrations Low and high frequency acceleration modes High-sensitivity sensor Compatible with multiple probes (long and short) Built-in torch, useful for measurements in low-light environments 2.4” colour TFT screen for clear display of readings Auto-rotating screen for ease of use Data Hold function (freezing of displayed values) Rechargeable lithium battery power supply Certifications: CE, UKCA Technical specifications Acceleration (PEAK) Range: 0.1 ~ 199.9 m/s² Frequency response: 10 Hz ~ 1 kHz / 10 Hz ~ 15 kHz Resolution: 0.1 m/s² Accuracy: ±(5% + 2 digits) Vibration velocity (RMS) Range: 0.1 ~ 199.9 mm/s Frequency response: 10 Hz ~ 1.5 kHz Resolution: 0.1 mm/s Accuracy: ±(5% + 2 digits) Vibration displacement (P-P) Range: 0.001 ~ 199.9 mm Frequency response: 10 Hz ~ 1 kHz Resolution: 0.001 mm Accuracy: ±(5% + 2 digits) Additional functions Low/high frequency acceleration mode Data Hold function Built-in LED torch Automatic shut-off after 5 minutes of inactivity Low battery indicator Power supply and battery life Battery type: Lithium 3.7V / 1350 mAh Charging: USB, DC 5V Charging time: approx. 3 hours Battery life: approx. 12 hours Operating conditions Operating temperature: 0°C ~ 40°C Humidity: ≤ 80% RH Dimensions and weight Dimensions: 180 × 28 × 64 mm Weight: approx. 191 g (with short probe) Included accessories Short probe Long probe USB charging cable User manual

Read more less

This product comes with a 3-year warranty. The UNI-T 2117R True RMS 1000A clamp meter is an excellent choice for measuring alternating current. It features a voltage measurement range of 1000V AC/DC, a resistance measurement range of 60MΩ and a bright backlight. Dual NCV allows users to detect live voltage without contact. The multimeter is CE/UKCA approved and has a safety rating of CAT II 1000V / CAT III 600V with 1000V overload protection. Product specifications: - True RMS - 1000A AC current measurement - Large LCD voltage display -/DC -/100V Backlight - AC frequency measurement: 20 Hz–10 kHz - Overload protection 1000V - NCV (dual high/low mode) Technical parameters: - AC current measurement (A): 1000 A ±() AC frequency (+-4) - AC voltage (V): 1000 V ±(1.0%+2) - DC voltage measurement (V): 1000 V ±(0.7%+3) - Resistance (Ω): 60 MΩ > ±(2) Capacitance (0.7%+2) 6mF ±(4%+5) - Display range: 6000 - Jaw opening: 33 mm - True RMS - Auto range - Diode test - NCV - Data log - LCD backlight - Auto-off: approx. 15 minutes - Low battery indication ≤2.5V approx. - Input protection - Power supply: 2 x AAA 1.5V (LR03) - Product weight: 210 g - Dimensions: 204 x 63 x 38 mm

Read more less

UNI-T UT191T PRO Line Multimeter This product comes with a 3-year warranty. UT191T Professional Multimeter UT191 series professional multimeters designed for industrial users. The UT191’s new function memory retains the most recent mode setting at the next power-up, improving user efficiency. The UT191T supports accurate and precise temperature measurement. Applications: This series of CE/GS/cTUVus-certified multimeters complies with CAT III 600V and has an IP65 rating, making it suitable for use in damp and dusty environments. 1. Measurement settings are saved after a power reset 2. IP65, 2 m drop resistance 3. True RMS/peak value measurement 4. Automatic backlight 5. 20A current measurement 6. AC LoZ measurement 7. Precise temperature measurement with 0.1 ℃ resolution Specifications: Range DC voltage (V): 600V ±(0.5%＋3) AC voltage (V): 600V ±(0.7%＋3) Local. ACV LPF: 600V ±(2%＋5) DC current (A): 20A ±(0.8%+3) AC current (A): 20A ±(1%+3) Resistance (Ω): 60MΩ ±(0.8%+2) Frequency (Hz): 10Hz~1MHz ±(0.1%+4) Frequency (Hz): 10Hz~1MHz ±(0.1%+4) Duty cycle: 0.1%~99.9% ±(2%＋5) Temperature (℃): -40℃~400℃ (0.1°C resolution) ± 0.1°C: +20)(temperature ACV peak hold ±(2%+100) Peak current detection ±(3%+100) Features: Display rate: 600 times/sec. Bar graph: 31 sections True RMS: √ Frequency response for AC voltage 45Hz~400Hz Frequency response for AC current 45Hz~400Hz Diode/continuity test: √ Auto/manual range: √ Auto power-off />Battery auto-shutdown indicator: √ √ Data hold/MAX/MIN: √ Function selection (SELECT): √ Flashlight/Auto backlight: √ 2 m drop test/IP65: √ General features: Power: 9V battery size: 8mm x 4mm Net product weight: 428g Product colour: red and grey Product dimensions: 180mm x 87mm x 59mm Standard accessories: test lead, battery, carrying case, contact-type temperature probe Standard individual packaging: Gift box, English manual Standard quantity per box: 10 pcs. 545 mm x 315 mm x 335 mm Standard gross weight per box: 8.8 kg Manufacturer: UNI-TREND

Read more less

UNI-T UT-CS09D Flexible Clamp Sensor This product comes with a 3-year warranty. The UT-CS09D is a stable, safe and reliable 3000A AC non-contact current meter with a flexible Rogowski coil. It displays current values directly when connected to the UT206B / 208B multimeters. Product specifications: - flexible Rogowski coil- flexible clamp lock, rotary knob for locking or unlocking- battery status measurement 1 battery status indicator 1 warning Warning range A up to 3000 A- maximum output voltage: 3.0 V AC- switch- drop resistance: 1 m Technical parameters: - AC current measurement (range / resolution / corresponding voltage) 30A / 0.1A / 0.1A / 100A / 0.1A 1A / ~ 10mV / 1A 3000A / 10A / ~ 1mV / 1A- Accuracy (mid-range): ± (3% + 5)- frequency response (45Hz to 500Hz)- switch: A. A. -03/0 (for measurement) B. 300A (for measuring 30 A – 300 A) C. 3000A (for measuring 300 A – 3000 A) D. OFF- measurement loop length: 45.7 cm (18”)- Measured conductor: maximum supply diameter: 3/1 pcs. R03 (AAA) 1.5V- operating temperature: 0°C – 50°C- operating humidity: ≤80% relative humidity- measurement category: CAT IV 600V- Device dimensions: 267 x 119.4 x 34 mm- including battery:- Weight:approx. Accessories: manual, BNC adapter, battery- Packaging: 1 blister pack / 10 boxes

Read more less

This product comes with a 3-year warranty. The UT306C professional non-contact infrared thermometer can quickly and accurately measure surface temperatures ranging from -50 °C to +500 °C by measuring the infrared energy radiated by the target surface. To make aiming the device at the target surface easier and more intuitive, a ring laser is built in, which indicates correct aiming of the thermometer. The distance-to-spot ratio is 12:1 with this device. This thermometer is drop-resistant from a height of 1 metre. It is possible to preset the emissivity of the measured surface within the range of 0.1 to 1.0. The display of preset functions and measured values is provided by a clear, high-contrast EBTN colour display, whilst limit values are indicated by an audible alarm and on the display. It is possible to display minimum, maximum and average temperatures, as well as deviations from the average (MIN, MAX, AVG, DIF). The thermometer switches off automatically to reduce power consumption if left unused for 15 seconds in HOLD mode and 10 seconds in other modes. The temperature measurement time is up to 250 ms in 95% of cases. The device is powered by two 1.5V AAA zinc-manganese or alkaline batteries. This non-contact infrared thermometer can be used in a variety of fields, such as the food industry, vehicle maintenance, metalworking, cold storage and other industries. Product specifications for non-contact surface measurement: - temperature range - 50 °C to +500 °C, can be switched to °F - the measured surface is delineated by a circular laser pointer - the ratio of distance to measured surface diameter is 12:1 with this instrument - EBTN2 colour display contrast x/2 EBTN2 measurement limit value - 6 mm measurement limit value indicator via a buzzer and on the display - powered by two 1.5 V AAA ZnMn or alkaline batteries Technical parameters: - Temperature range: -50 ℃ to + 500 ℃ (-58 ℉ to + 500 ℃ (-58 ℉ to + 500 ℃ (-58 °F to +500 °C) -50 °C to 0 °C: ± (2 °C + 0.1 °C/°C) - measurement accuracy between 0 °C and 500 °C: ± 2 °C or ± 2% (whichever is greater) - measurement accuracy between -58 °F and 32 °F: ± 32 °F - measurement accuracy between 32 °F and 932 °F: ± 4.0 °F or ± 2% (whichever is greater) - resolution: 0.1 °C / 0.1 °F - spectral response: 8μm to 14μm - response time: 9 ms/≤ 25 ms/distance to measured surface diameter: 12:1 - circular laser measurement area delimitation: yes - Class 2 ring laser: wavelength 630 nm to 670 nm, output power ≤1 mW - display: high-contrast EBTN with backlight, measuring 25 x 26 mm; emissivity range 0.1 to 1.0; default 0.95 - measurement lock: yes - powered by two 1.5 V AAA batteries: ZnMn or alkaline - ZnMn battery life: continuous temperature measurement ≥6 hours (laser on + display backlight) - Automatic switch-off when inactive: yes - low battery indicator: yes 1 m - Temperature alarm mode: HI / LO (high / low alarm with audible signal) - MAX / MIN / AVG / DIF hold: yes - Operating temperature: 0 ℃ to 50 ℃ (32 ℉ to 122 ℉) - Operating humidity: - 90% RH: storage temperature: -20 ℃ to 60 ℃ (-4 ℉ to 140 ℉) - Product colour: red and grey - Net product weight: 161.5 g - Product dimensions: 146 x 94.5 x 46 mm - UT306C: 1 pc - 1.5V / AAA batteries: 2 pcs - cover: 1 blister pack - manual: 1 pc Packaging for wholesale customers: - standard quantity per box: 20 pcs standard box: 20 pcs x box: 755 dimensions 75 mm MANUFACTURER: UNI-TREND https://www.uni-trend.cz/

Read more less

This product comes with a 3-year warranty. The UT15B MAX digital multimeter is a reliable True-RMS digital multimeter. Designed to withstand interference, the multimeter can filter out interference from the carrier frequency superimposed on a sinusoidal wave signal or a variable voltage distortion signal, and is capable of measuring the output voltage of a variable frequency converter. In DC/AC voltage mode, the instrument can perform frequency and duty cycle measurements. The UT15B/17B/18B MAX series True RMS multimeters feature a compact and portable design, fast response, strong protection against EMC interference, and come with standard gold-plated test leads and fine gold-plated test leads. They are also equipped with 1000 V input protection, making them an ideal tool for electronics and electrical engineers. Certifications: CE, UKCA, cETLus, REACH, RoHS Product specifications: - Large LCD display, 6000-count analogue-digital display, fast ADC refresh rate: 5 times per second - Built-in VFD for precise measurement of automatic/variable frequency bias voltage; output from relative measurement mode for capacitance over 6.2 μF in relative measurement mode - Ability to capture maximum/minimum (MAX/MIN) values during voltage, current and resistance measurement - full protection against false detection, enabling it to withstand a surge voltage of up to 1000 V; designed with overvoltage and overcurrent indication - the current input terminal is equipped with audible and visual indicators for incorrect connection - two test probes (standard and fine-tip) - LED indication for high test voltage (≥30 V). - Two backlight modes (high/low brightness). - When switching positions, the AC/DC memory function is activated. Technical parameters: - DC voltage measurement ranges (direct current): 600 mV / 6 V / 60 V / 600 V / 1000 V ±(0.4%+3) - DC voltage measurement ranges (AC current): 60 / 60 V / 60 V / 60 V / 60 V / 1000 V ±(0.5%+5) - VFD (voltage): 600 V ±(8%) - AC current measurement ranges (alternating current): 600 μA / 6000 μA / 60 mA / 600 mA / 6 A / 6 A / ± 3.5 A / ± 3(1.2 A / ± 3) current (direct current): 600 μA / 6000 μA / 60 mA / 600 mA / 6 A / 10 A ±(1.2%+3) - resistance measurement ranges: 600 Ω / 6 kΩ / 60 kΩ / 600 kΩ / 600 kΩ / 600 kΩ / 600 kΩ ±2) 0. Frequency measurement range: 10 Hz to 10 MHz ±(0.1%+3) - Duty cycle measurement range: 1% to 99.9% ±(1.0%+4) - HTN-type LCD display with a maximum display of 6000 - Diode test - Mode: MAX/MIN background measurement mode - MAX/MIN measurement (adjustable) - Automatic or manual setting ranges - Auto-off (sleep mode during inactivity) - low battery indicator - Audible and visual alarm - incorrect connection alarm - category: CATⅢ 600V - Power supply: 2 x R6 1.5 V batteries - Battery weight: 5 V - weight: 5 V 182 mm x 91 mm x 45 mm - accessories: 1 user manual, 2 pairs of test leads (standard gold-plated probe and fine-tip probe), 2 batteries.

Read more less

This product comes with a 3-year warranty. The UTG1022X function generator from the UTG1000X series features a precise and stable output waveform with a resolution of up to 1 μHz. It is an economical, high-performance, multifunctional arbitrary waveform generator. It can generate precise, stable and clean output signals with low distortion. With convenient operation, excellent technical specifications and an easy-to-use graphical display, it is a multifunctional device that meets the needs of learning, testing and manufacturing. The generator is expected to be used in the teaching, design, testing, debugging and repair of electronic and electro-acoustic devices; testing of semiconductor components, etc. Product specifications: - dual-channel system with equal power - Simultaneously provides two high-power channels. High output amplitude is still guaranteed even at high frequencies - Can generate a square wave up to 10MHz - High signal-to-noise ratio - Optional power amplifier module: The PA model is equipped with a standard power amplifier module, which can provide a maximum 4W waveform signal to meet the testing requirements of certain pulse generators with three pulse generation functions/n-Offer. methods, allowing for more flexible generation of various pulse trains - Multiple modulation modes: Offers seven analogue and digital modulation methods—AM, FM, PM, FSK, ASK, PSK and PWM—enabling the use of multiple fields - Sweep function: supports two frequency sweep methods: ‘linear’ and ‘logarithmic/s2000br/MS-/sweep’ 16-bit vertical resolution - Multifunction button and numeric keypad for easy operation Technical specifications: - Maximum waveform frequency: 20 MHz - Supply voltage: 220–240 V AC / 50 Hz - Waveform - 1 µHz... 1 µHz... 10 MHz (pulse waveform), 1 µHz... 10 MHz (square waveform), 1 µHz... 20 MHz (sinusoidal waveform), 1 µHz... 400 kHz (ramp waveform) - display type: 4.3" TFT LCD - display: 4.3" TFT LCD, 2.7" diagonal - number of channels: 2 - vertical resolution: 16 bits - memory depth: 4 kpts - output parameters: impedance: 50Ω - dimensions: 215 x 103 x 316 mm - interface: USB -, modulation type: USB , FSK, PM, PSK, AM, PWM - waveforms: arbitrary, square, DC, pulse, ramp, sinusoidal, noise - sampling rate: 200 MSa/s - memory: 200 waveforms Package contents: - BNC-BNC cable - BNC cable - Alligator clip cable - USB cable - Power clip - Cable Manufacturer: UNI-TREND

Read more less

This product comes with a 3-year warranty. The UT512E 2.5 kV insulation resistance tester is a high-voltage digital insulation resistance tester, designed with multiple voltage ranges, including 250 V, 500 V, 1000 V and 2500 V. It is an ideal measuring instrument for the electrical power, telecommunications, meteorology, machine shop, oilfield, electromechanical installations, and maintenance and power supply departments of industrial and mining enterprises. leakage current - Step voltage: 10% of the range - high voltage alarm - automatic discharge - Data storage: 999 sets - PC software analysis: via USB cable - Overvoltage category: CAT IV 600V Technical/test parameters: //>-0 1000V / 1500V / 2500V - capacitance test: 0.01uF ～ 2.0uF / ±（15%+3） - Low resistance test: 0.1Ω ～ 600Ω / ±（2%–+10% of voltage）/rated voltage 250V / 350V, 275V, 300V 500V / 300V, 350V, 400V, 450V, 500V, 550V, 600V 1000V / 500V, 800V, 800V, 800V, 900V, 1000V, 1100V, 1200V 2500V / 1250V, 1500V, 1750V, 2000V, 2250V, 2500V Output voltage step voltage range (rating) Set the voltage range to 0% each time and adjust each voltage range from 0% to 50%–120% of that range display accuracy: ± (10% of reading + 10V) Output accuracy: ±(0%–20%) - DC voltage: 30 ～ 1000 V DC / ±(3%+5) - AC voltage: 70 ～: 50Hz/60Hz ±(3%+5) - Current: 0.01nA ～ 5mA - Short-circuit current: approx. 5mA - Polarisation index (PI): automatic display - Dielectric absorption ratio (DAR) monitoring: automatic measurement /> - Resistance comparison function: monitors the voltage of the measured object and the discharge status after testing - Timing range: 0 s ～ 99 m and 59 s - Storage function: 999 sets - USB for connection to a PC - low battery indicator - Auto power off - Dimensions: 163 x 9 mm (L x W x D) - power supply: 14.8V, 5200 mAh lithium battery - Product colour: black and red - product weight: 1800 g (including battery) Accessories: - Test cable (red, black, green): 1 lithium battery - 1 charging unit (Output: 16.8 V DC, 2 A) - Lithium battery (14.8 V, 5200 mAh) - 1 USB cable - Carrying strap 1 pc Manufacturer: UNI-TREND

Read more less

This product comes with a 3-year warranty. The UTD1062C combines a single-channel portable oscilloscope and a multimeter in a single unit. It offers excellent specifications and a range of advanced functions, as well as ease of use, making it suitable for use in the field. The oscilloscope’s bandwidth is up to 50MHz at a sampling rate of 200MSa/s. Its powerful triggering and analysis functions facilitate the acquisition and analysis of waveforms, capable of measuring 22 signal parameters fully automatically. A multimeter allows you to measure DC and AC voltages and currents, resistance and capacitance. The device features a built-in 3.5-inch colour LCD display with a resolution of 320 x 240 pixels. The display is easy to read even in bright light. In multimeter mode, the maximum value displayed is ±3999. The device is powered by a built-in Li-ion battery or a 9V/4A AC/DC adapter. As the device’s design is based on traditional instrument controls, users can operate these devices without having to spend a significant amount of time learning and familiarising themselves with the input voltage range. 150V in CAT II (1:1 probe divider) and an input voltage of 300V in CAT II (1:10 probe divider). 200MS/s - Max. memory depth: 12 kpts - A/D converter resolution: 8 bits - Time base range: 5 ns/div to 50 s/div - Input coupling: (1 MΩ ±2%) // (21 pF ±3 pF) - vertical axis: 5 mV/div/div – 2 mV/MΩ/div – 2/MΩ ± 2% ≤ 7 ns - Trigger: edge, pulse, video - automatic measurements: peak-to-peak, amplitude, maximum, minimum, high, low, average, root mean square, overshoot, preshoot, frequency, period, rise time, fall time, positive pulse, negative pulse, positive duty cycle, negative duty cycle, delay, FFT, delay, Hamming Blackman-Harris, Rectangular - internal memory storage: 10 groups of curves, 10 setting modes - saving to USB: 10 waveform groups, 10 interface groups Multimeter - DC voltage measurement ranges: 400mV / 0.4V / 0V / 400mV; accuracy ±(1%+5) - AC voltage measurement ranges (40Hz to 400Hz): 400mV / 4V / 40V / 400V; accuracy ±(1.2%+5); - DC current measurement ranges: 350µA; accuracy ±(1.2%+5); 40mA / 400mA; accuracy ±(1%+5); for 6A (with UT-M07 converter up to 10A) accuracy ±(1.5%+5) - AC current measurement ranges (40Hz to 400Hz): 350µA; accuracy ±(1.2%+5); accuracy 40mA / 400mA ±(1.5%+5); for 6A (with UT-M07 converter at 10A) accuracy ±(2.5%+5) - resistance measurement ranges: 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ accuracy ±(1.2%+5); for 40MΩ accuracy ±(1.5%+5); - capacitance measurement ranges: 51.2nF / 512nF / 5.12µF / 51.2µF / 100µF; accuracy ±(3%+5) - diode and continuity testing: yes - range switching mode: automatic / manual - display and recording of trend curves for changes in voltage, current and resistance Technical parameters: - power supply: 2450V AC, - 2450V 440Hz, CAT II, ​​power consumption < 20VA - Standard interface: 1 x mini USB-Host - battery: Li-ion 7.4V/3600mA - battery life: 8 hours - display: 3.5 inches, 320 x 240 pixels - recommended once a year IP rating: IP2X - Operating ambient temperature: 0°C to +40°C - Storage temperature: -20°C to +60°C - Operating ambient humidity: +10°C to +30°C: ≤90% ± 5%RH, +30°C to +40°C Altitude: max. 3,000 m above sea level - Non-operational (storage) altitude: 5,000 m above sea level - Net weight: 0.9 kg - gross weight: 2.3 kg - Dimensions: 199 x 118 x 49 mm Package contents: - UTD1050CL: 1 pc - probe with 1.2 m cable and 1x, 10x switchable divider (UT-H03): 1 pc - current (10A) / voltage converter module (UT-M07): 1 pc - current (4A to 6A) / voltage converter module (UT-1004) : (UT-105004) 240 V AC rms, 45 to 440 Hz, CAT II: 1 pc - USB-Host / mini USB cable (UT-D17): 1 pc - User manual: 1 pc Packaging for bulk customers: ->- standard quantity per box: - 5 pcs. 190 x 330 mm - gross weight of box: approx. 3.3 kg MANUFACTURER: UNI-TREND Software update: https://instruments.uni-trend.com/EU-EN/handheldoscilloscopes/utd1000l.html

Read more less