10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UPO2104E Oscilloscope
This product comes with a 3-year warranty. The UPO2104E oscilloscope is a digital oscilloscope featuring Ultra Phosphor technology from the UPO2000E series. Compared to the lower-end model, the UPO2102E offers 4 channels. It is also equipped with a sampling rate of 1 GS/s. This is sufficient for a bandwidth of 100 MHz (unlike the lower-end versions, the UPO2072CS and UPO2074CS, which are limited to 70 MHz). It is a multifunctional, high-performance, easy-to-use oscilloscope with excellent technical specifications. It has an 800 x 480 pixel display. It supports USB storage and communication with a PC via Plug and Play USB. Software for connecting to a PC can be downloaded from the manufacturer’s website:
https://instruments.uni-trend.com/list_77/945.html. It differs from the previous version of the UPO2104CS with new firmware.
Product specifications:
- bandwidth 100MHz
- 4 channels
- sampling rate 1 GS/s
- maximum memory depth 56 Mpts (per channel) (previously, up to 28 Mpts per waveform)
- up to 28 Mpts per second
80,000 wfms/s (previously 50,000 wfms/s)
- Time base range 5 ns/div – 50 s/div
- input impedance (1 MΩ ± 2%) // (20 pF ± 3 pF)
- vertical axis/V/div - 1 mV/div (1 MΩ)
- DC gain accuracy ± 3%
- number of saved waveforms 65,000
- Triggering: Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup/Hold, Pulse Width, Slope, Video, Pattern, RS232 / UART B, operations: - waveform, I2/C A-B, AxB, A / B, FFT, Editable Advanced, Filter
- Automatic measurement: Max, Min, High, Low, Middle, Pk-Pk, Amplitude, Mean, Cycle Mean, RMS, Cycle RMS, Cycle Area, Overshoot, Pre-Shoot, Period, Freq, Rise, Fall, + -D,D,D,D,D,D,D,D FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
- number of measurements: 5 simultaneous measurements
- statistics: mean, max, min, standard deviation, number of measurements
- frequency counter: 6 bits
- standard interfaces: USB-Device, Pass Out, UX, LAN
Technical parameters:
- Power supply: 100V–240V AC, 50/60Hz
- display: 8 inches, 800x480 pixels
- Weight: 3.5 kg
- Dimensions: 336x160x16 mm
:
- 4 probes (with switchable 1x, 10x range)
- Detachable three-wire power cable
- USB cable
- Quick installation guide with links to the manufacturer’s website
MANUFACTURER: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UPO1202 series digital phosphor oscilloscope features the innovative UNI-T Ultra Phosphor 2.0 with an improved new design and deep storage function, high-speed waveform acquisition, real-time waveform recording and playback, and a 256-gradation display. The series supports the DVM module, rich trigger and bus decoding functions, and supports real-time hardware decoding with full memory. It is widely used in many fields, including embedded system design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development, and education. 2.0:
Normal waveform capture rate of up to 100,000 wfms/s; in Fast Acquire mode, the waveform capture rate reaches 500,000 wfms/s
- Long recording memory length:
56 Mpts of recording memory for full-frequency data at high sampling rates 2.0:
Multi-Scopes 2.0 can separate the time base and voltage grid of two channels, allowing users to observe two completely different signals simultaneously in the same window. (RS232/UART, I2C, SPI) milliseconds, which is 100 times faster than traditional software decoding and significantly improves analysis efficiency
Technical parameters:
- Oscilloscope type: digital
- Power supply: 100V–240V AC, 50/60 Hz
Bandwidth: 200 MHz
- Real-time sampling rate: 1 GSa/s
- Rise time: ≤1.8 ns
- Recording memory length: 56Mpts
- Input impedance: 1MΩ/16pF
- Input sensitivity: 500 µV/V/div... RS232, UART, I2C, SPI
- Triggering: rising edge, Nth edge, window, pattern, runt, falling edge, delayed, pulse width, slope, timeout, video signal
- Time base: 1n...1pc/div
- Vertical resolution: 8 bits
>- LCD display type is not optional; 7"
- Shipping dimensions (L x W x H): 336 mm × 164 mm × 105 mm
- Shipping weight: <2.5 kg
Package contents:
- power cable
- USB 2.0 cable
- 100MHz probe*2 (UT-P>
) UNI-T
SOFTWARE & FIRMWARE
https://instruments.uni-trend.com/products/digital-oscilloscopes/UPO1002
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UPO1102 series digital phosphor oscilloscope features the innovative UNI-T Ultra Phosphor 2.0 with an improved new look and deep storage function, high-speed waveform acquisition, real-time waveform recording and playback, and a 256-gradient display. The series supports the DVM module, rich trigger and bus decoding functions, and supports real-time hardware decoding with full memory. It is widely used in many fields, including embedded system design, instrumentation, industrial electronics, consumer electronics, automotive electronics, field maintenance, research and development, and education. 2.0:
Normal waveform capture rate of up to 100,000 wfms/s; in Fast Acquire mode, the waveform capture rate reaches 500,000 wfms/s
- Long recording memory length:
56 Mpts of recording memory for full-frequency data at high sampling rates 2.0:
Multi-Scopes 2.0 can separate the time base and voltage grid of two channels, allowing users to observe two completely different signals simultaneously in the same window. (RS232/UART, I2C, SPI) milliseconds, which is 100 times faster than traditional software decoding and significantly improves analysis efficiency
Technical parameters:
- Oscilloscope type: digital
- Power supply: 100V–240V AC, 50/60 Hz
bandwidth: 100 MHz
- real-time sampling rate: 1 GS/s
- rise time: ≤3.5 ns
- recording memory length: 56Mpts
- input impedance: 1MΩ/16pF
- input sensitivity: 500 µV/div bus: protocol included
- Triggering: rising edge, Nth edge, window, pattern, runt, falling edge, delayed, pulse width, slope, timeout, video signal
- time base: 1n...1pc/div
- vertical resolution: 8 bits
- LCD display type is not optional; 7"
- shipping dimensions (L x W x H): 336 mm × 164 mm × 105 mm
- Shipping weight: <2.5 kg
Package contents:
- power cable
- USB 2.0 cable
- 100MHz probe*2 (UT-P>
) UNI-T
SOFTWARE & FIRMWARE
https://instruments.uni-trend.com/products/digital-oscilloscopes/UPO1002
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UNI-T UDP3305S Programmable Linear DC Power Supply – UDP3000S Series is a high-performance programmable linear DC power supply. It features a clear LCD user interface, excellent performance indicators, a range of analytical functions and communication interfaces. It can meet users’ diverse testing needs.
Its aim is to provide affordable programmable DC power supplies for education, scientific research, industry and other fields.
4 channels, CH1/CH2: 0–30V/0–5A, CH3: 0–6V/0–3A, CH4: 5V/2A, Power: 13W/2A, Resolution: 13W/2A, Resolution: 13W <0.03%+10mV/<0.2%+5mA, USB/RS232/LAN, Digital I/O
Product parameters:
- split-screen function
- real-time value monitoring
Interactive LCD interface:
- utilising a high-definition function and rich user interface, with a 4.3-inch high-definition display. operation, which can display the current set output voltage/current, actual output voltage/current and real-time protection of the power supply output value. The functional interface is simple yet comprehensive, and easy to operate
List/delay functions:
- With list and delay setting functions, up to 2048 data sets can be set according to test requirements, and the number of cycles can reach 99999. It is used with waveform templates, which is very convenient for cyclic testing and loop testing. Parallel connection:
- The serial-parallel connection between CH1 and CH2 of the main channel can be implemented without an external connection, which simplifies the connection and facilitates testing
Extended interface for remote control:
- Standard RS232 communication interface, Ethernet interface, digital I/O, and USB master and slave interfaces can be controlled via a remote connection to the RS232 host computer or USB32 software, or via RS232 host software. Control
Technical parameters:
- Model type: UDP3305
- Linear, programmable laboratory power supply, multi-channel
- Number of channels: 4Ch
- Display type: 4.3" LCD
- supply voltage: 230 V AC>- output voltage: 230 V/A
-
CH1/CH2: 0 ~ 30V DC
CH3: 0 ~ 6V DC
CH4: 5V DC
- output current:
CH1/CH2: 0–5A
CH3: 0–3A
CH4: 2A
- total resolution of 8 W
10mV
- output current resolution: 1mA
- voltage stabilisation: ≤0.3% + 20mV
- current stability: ≤0.2% + 5mA
- Interface: USB device, RS-232, LAN, USB host, digital I/O
- Dimensions: 6/24 mm
- 1 x 24 mm Accessories supplied: power cable, USB 2.0 print cable
- Shipping weight: 10.2 kg
Manufacturer: UNI-T
Link to download software for PC connection:
https://instruments.uni-trend.com/products/dc-power-supplies/UDP3000S
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UNI-T UDP3305S Programmable Linear DC Power Supply – UDP3000S Series is a high-performance programmable linear DC power supply. It features a clear LCD user interface, excellent performance indicators, a range of analytical functions and communication interfaces. It can meet users’ diverse testing needs.
Its aim is to provide affordable programmable DC power supplies for education, scientific research, industry and other fields.
4 channels, CH1/CH2: 0–30V/0–5A, CH3: 0–6V/0–3A, CH4: 5V/2A, Power: 13W/2A, Resolution: 13W/2A, Resolution: 13W <0.03%+10mV/<0.2%+5mA, USB/RS232/LAN, Digital I/O
Product parameters:
- split-screen function
- real-time value monitoring
Interactive LCD interface:
- utilising a high-definition function and rich user interface, with a 4.3-inch high-definition display. operation, which can display the current set output voltage/current, actual output voltage/current and real-time protection of the power supply output value. The functional interface is simple yet comprehensive, and easy to operate
List/delay functions:
- With list and delay setting functions, up to 2048 data sets can be set according to test requirements, and the number of cycles can reach 99999. It is used with waveform templates, which is very convenient for cyclic testing and loop testing. Parallel connection:
- The serial-parallel connection between CH1 and CH2 of the main channel can be implemented without an external connection, which simplifies the connection and facilitates testing
Extended interface for remote control:
- Standard RS232 communication interface, Ethernet interface, digital I/O, and USB master and slave interfaces can be controlled via a remote connection to the RS232 host computer or USB32 software, or via RS232 host software. Control
Technical parameters:
- Model type: UDP3305
- Linear, programmable laboratory power supply, multi-channel
- Number of channels: 4Ch
- Display type: 4.3" LCD
- supply voltage: 230 V AC>- output voltage: 230 V/A
-
CH1/CH2: 0 ~ 30V DC
CH3: 0 ~ 6V DC
CH4: 5V DC
- output current:
CH1/CH2: 0–5A
CH3: 0–3A
CH4: 2A
- total output resolution:
- 8 W output power
- 8 W 1mV
- output current resolution: 1mA
- voltage stabilisation: ≤0.03% + 10 mV
- current stability: ≤0.2% + 5mA
- Interface: USB device, RS-232, LAN, USB host, digital I/O
- Dimensions: 6/24 mm
- 1 x 24 mm Accessories supplied: power cable, USB 2.0 print cable
- Shipping weight: 10.2 kg
Manufacturer: UNI-T
Link to download software for PC connection:
https://instruments.uni-trend.com/products/dc-power-supplies/UDP3000S
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The UDP3305C programmable DC power supply is a cost-effective, four-channel independent laboratory power supply from UNI-T. The power supply contains a classic linear transformer, and in channels CH1 and CH2 it allows operation in constant voltage (CV) mode within the range of 0 to 30V or in constant current (CC) mode from 0 to 5A. Channel CH3 provides a constant output voltage with the option to select a level of 1.8V, 2.5V, 3.3V or 5.0V and features overload protection when the current draw reaches 3.2A. In addition, there is a USB connector on the front panel, which serves as channel CH4 and can be used to charge, for example, a mobile phone at 5V/2A.
Channels CH1 and CH2 can operate independently, or can be connected internally in series or in parallel, in which case the power supply provides a voltage of 0 to 60 V or 0 to 50 V or 30 V/10 A.
The laboratory power supply features an EBTN display with 6 high-precision indicators that simultaneously display voltages, currents and power in both CH1 and CH2 channels to 4 decimal places.
The power supply has programmable parameters. It features 5 memory slots for easy storage and recall of preset modes and a lock button to prevent unwanted changes to the parameters. On the rear of the power supply housing are USB-Device and RS232 connectors and a DIGITAL I/O interface for remote control of the power supply. Using the supplied software, it is possible to record and display the consumption or load characteristics of the connected load in real time on the connected PC in an Excel spreadsheet or a graph, and it can communicate with the computer via SCPI communication commands. Regular calibrations can be performed via the software.
The power supply contains a temperature-controlled fan; the long-term temperature overload of the laboratory power supply’s transformer is monitored by sensors which shut down the power supply when the limit value is reached and restart it after cooling.
Product parameters:
- fine adjustment of current and voltages CH1/2 in both channels. Four-digit displays for immediate monitoring of voltages, currents and powers in channels CH1 and CH2
- Voltage setting from 0 to 30V with a resolution of 10mV
- Current setting from 0 to 5A with a resolution of 1mA
- Operation of CH1 and CH2 channels in constant voltage mode, with the option to connect CH1 and CH2 channels in series or in parallel
- Overvoltage protection (OVP), overcurrent protection (OCP), over-temperature protection (OTP)
- CH3 channel with a fixed voltage of 1.8V; 2.5V; 3.3V or 5.0V, max. 3.2A
- CH4 channel on the front panel USB port for charging, e.g. a mobile phone
- built-in buzzer to indicate status changes
- Lock buttons to prevent unwanted changes to parameters
- USB-Device, RS232, and DIGITAL I/O interfaces on the rear panel
- Temperature-controlled cooling fan
- Disconnection from the power supply in the event of a voltage transformer overload
- rear voltage selector
110V/120V/220V/230V (AC 50/60Hz)
Technical parameters:
- Nominal output voltage CH1 and CH2: 0 to 30V
- Nominal output current CH1 and CH2: 0 to 5 A
- total output voltage
- 30 V
resolution (CH1 and CH2): 10 mV/1 mA
- in (CV) mode, voltage setting accuracy (CH1 and CH2): ≤ (0.01% of measured value +3 mV, at current ≤ 3 A)
- in (CV) mode, voltage setting accuracy (CH1 and CH2): ±5% of the measured value, for current > 3 A
- in (CC) mode, current setting accuracy (CH1 and CH2): ≤ (0.2% of measured value +3mA)
- noise and distortion (20 Hz to 20 MHz) at CH1 and CH2 outputs: ≤1 mV RMS / ≤3 mA RMS – nominal output voltage / ≤3 mA RMS – nominal current 1.8 V; 2.5 V; 3.3 V; 5.0 V (±3%, can be precisely set)/max. 3.2 A
- noise and hum (20 Hz to 20 MHz) at CH3 output: ≤2 mV
- Output voltage/max. current in CH4 channel (USB): 5 V ± 0.25 V/2 A
- temperature coefficient of voltage/current: ≤ 300 ppm/°C // ≤ 300 ppm/°C
- Nominal supply voltage: AC 110V/120V/220V/220V/20V (protection)
- protection (with 220/230V AC supply): fuse type: T3.13AL/250V (20x5mm)
- dimensions (width x height x depth): 16 mm x 40 x 40 mm approx. 10.2 kg
- gross weight of the box: 12 kg
Contents of individual package:
- UDP3305C laboratory power supply: 1 pc
- power cable: 1 pc
- USB-A to USB-B interface cable (UT-D14): 1 set of connection cables
- 1 pc
set
- Spare fuses: 1 pc
- user manual: 1 pc
- RS232 communication cable (on request): 1 pc
Packaging for bulk customers:
- standard quantity per box: 2 pcs
- Standard box dimensions: 445 x 3003 mm
MANUFACTURER: UNI-T
PC software download link:
https://instruments.uni-trend.com/EU-EN/powersupplies/udp3300.html
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UDP 1306C DC Power Supply
The UDP1306C programmable DC power supply is a cost-effective laboratory power supply featuring a main output channel and a USB charging channel. It is a basic power supply for users who require a smaller, highly reliable power supply. Compared to the higher-end (multi-channel) UDP power supplies, this model allows for a higher channel load, up to 6A at a voltage of 32V.
The power supply contains a classic linear transformer and allows operation in constant voltage (CV) mode within the range of 0 to 32V or in constant current (CC) mode from 0 to 6A. In addition, there is a USB connector on the front panel, which can be used to charge, for example, a mobile phone at a voltage of 5V and a current of up to 3A.
The laboratory power supply features an EBTN display with three high-precision indicators that simultaneously display voltage, current and power with 4-digit accuracy.
The power supply has programmable parameters. It features 5 memory slots for easy storage and recall of set modes, and a lock button to prevent unwanted changes to the parameters. On the rear of the power supply housing are USB-Device and RS232 connectors, and a DIGITAL I/O interface for remote control of the power supply. Using the supplied software, it is possible to record and display the consumption or load characteristics of the connected load in real time on the connected PC in an Excel spreadsheet or graph, and communication with the computer can be carried out via SCPI commands.
Regular calibrations can be performed via the software.
The power supply contains an overheat-controlled fan; the long-term temperature of the power supply is monitored by an overheat fan, which shuts down the power supply when the limit value is reached and restarts it after cooling.
Product parameters:
- fine software adjustment of output voltage and current
- three four-digit displays for immediate monitoring of voltage, current and power
- Voltage setting from 0 to 32V with a resolution of 60V, current setting from 0 to 32V with a resolution of 6mV
- power supply operation in constant voltage (CV) or constant current (CC) mode
- Overvoltage protection (OVP), overcurrent protection (OCP), over-temperature protection (OTP)
- one channel for charging, e.g. a mobile phone via the USB port on the front panel
- USB-Device, RS232 and DIGITAL I/O interfaces on the rear panel
- built-in buzzer to indicate status changes
- Lock buttons to prevent unwanted changes to parameters
- Intelligent temperature-controlled cooling fan
- Automatic power cut-off in the event of transformer overload
- on the rear panel, input voltage selector 110V/120V/220V/230V (AC 50/60Hz)
Technical parameters:
- rated output voltage: 0 to 32V
- rated output current: 0 to 32V
- rated output current: 0 to approx. 192 W
- Voltage/current setting resolution: 10 mV/1 mA
- Voltage setting accuracy in (CV) mode: ≤ (0.01% of measured value + 3 mV)
- current setting accuracy in (CC) mode: ≤ (0.1% of measured value plus noise +3mA (-5 mA) at 20MHz) at the main output: ≤2mV RMS / ≤3mA RMS
- Nominal voltage/current protection at the USB output: 5V ± 5%/3A
- Voltage/current temperature coefficient: ≤ 300ppm/°C // ≤ 300ppm/°C // ≤ 300ppm/°C supply voltage-°C 110V/120V/220V/230V / (50/60Hz)
- Protection (for 110/120V AC power supply): fuse type: T6.3AL/250V (20x5mm)
- protection (for 220/230V AC power supply type: fuse T6.3AL/250V/AC): 35V/250V (20x5mm)
- dimensions (width x height x depth): 136 x 194 x 327mm
- weight: approx. 7.5 kg
Contents of individual package:
- UDP1306C laboratory power supply: 1 pc
- power cable: 1 pc
- USB-A to USB-B interface cable (UT-D14): 1 pc
- Set of connection cables with alligator clips: 1 set
- user manual: 1 pc
- RS232 communication cable (on request): 1 pc
Packaging for bulk customers:
- Standard quantity per box: 1 pc
- Standard box dimensions: 505 x 270 x 335 mm - Gross weight of box: 6 kg
MANUFACTURER: UNI-T
PC software download link:
https://instruments.uni-trend.com/EU-EN/powersupplies/udp1306c.html
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T T07 Temperature Probe
Designed for measuring flat and sloped surfaces. Suitable for measuring the temperature of hot drums and the surface of utensils.
Probe length: 200 mm
The probe is bent at 90˚
Cable length: 1000 mm
Measuring range: -50˚C ~ 500˚C (-50˚C ~ 500˚C (-50˚F ~ 93˚F) </2˚F/93/2
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T T12 temperature probe UT-T12 temperature probe
- contact temperature probe (type K thermocouple)- adapter plug- 0°C to 800°C• accuracy ±0.4%
TRENDUNI- Manufacturer:
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T T10 Temperature Probe
UT-T10K Temperature Probe
● Measurement range: -40°C to 260°C (40°F to 500°F)
● Accuracy: ±0.75%
● Features and application: used for the UT213 series, UT39C, UT204A, UT206, UT208, UT208A, UT107, UT109, UT133A
● Quantity: 1PC
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T T06 Temperature Probe
Designed for measuring flat and sloped surfaces. Suitable for measuring the temperature of hot drums and the surfaces of utensils.
Probe length: 125 mm
Cable length: 1000 mm
Measuring range: -50˚C to 500˚C (-50˚F to 932˚F)
/>/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T T03 Temperature Probe
Used to measure the temperature of liquids and semi-solids.
Probe length: 180mm
Cable length: 1000 mm
Measuring range: -50˚C ~ 600˚C (-50˚F ~ 1112˚F)
/en/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The LM320F digital protractor is a lightweight and portable digital protractor with a durable aluminium alloy frame, ensuring durability during use. It allows you to accurately measure the slope of a plane, effectively replacing a spirit level for construction work – when building roofs, floors or drainage systems. It is equipped with a high-resolution display and automatic screen rotation, covering the entire 4×90° measurement range. The device provides real-time data on the angle of inclination and is fitted with a magnetic base for easy and stable positioning. The default unit of measurement is degrees (°), but other units can also be selected: percentage (%), millimetres per metre, or inches per foot. It is widely used in the fields of engineering, construction and mechanical installations. The device has three built-in lasers that can be switched on and off individually and can project the centre of the digital protractor, for example, onto a wall. The device has a built-in 3.7 V, 1000 mAh lithium battery, which is charged via the included USB-C cable.
Product specifications:
- Precise digital protractor (inclinometer)
- Aluminium alloy frame, lightweight and portable
- 4×90° relative angle measurement
- 4×90° relative angle measurement modes
- Multiple unit options: mm/m, in/ft, %, °
- 1000 mAh rechargeable lithium battery
- Rotating display with LED backlight
- fitted with magnetic bases
- laser pointer
- certification: CE, RoHS
- language: English
>
Technical parameters
range: 4 x 90°
- measurement resolution: ± 0.05°
- angle measurement accuracy: ± 0.2°
- Units of measurement: °; %; mm/m; in/ft
- laser indication: yes, three built-in lasers
- laser accuracy: ± 3 mm / 5 m
- magnetic attachment to base: four-sided magnet (bottom, back, left and right)
- angle measurement modes: relative/absolute measurement
- automatic screen rotation
- automatic screen rotation/
- power off: yes
- material: AL alloy frame + ABS
- power supply: 3.7 V / 1000 mAh lithium battery
- operating temperature: 0 °C to 50 °C
- laser class: 2
- laser type: 630–670 nm, <1 mW product lifespan:-/>-
83.5 x 70 x 35.5 mm
- net product weight: 180 g
- Product colour: black and red
Contents of individual packaging:
- Digital protractor
- USB-C extension cable
- User manual:
MANUFACTURER: UNI-TRENDER:
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. UNI-T LM40i mini laser rangefinder. This mini rangefinder is a small, compact and unique tool, not only for DIY enthusiasts but also for professionals, helping you to quickly measure any area. It is smaller in size and lighter in weight. It is characterised by high accuracy, excellent design and many functions. The hard metal casing offers the user excellent grip and can be used in harsher environments. It is widely used in exterior decoration, engineering projects, etc.
Product specifications:
- compact size and portable design
- multiple measurement modes
- high accuracy
- custom calibration
- LCD backlight
- unit switch
- CE certification
Rohn
>
Specifications:
- measurement range: 0.05 to 50 m
- measurement accuracy: ± (2 mm + 5 × 10⁻⁵ D)
- continuous measurement: yes
- area and volume measurement: yes
- circumference measurement: yes
- Pythagoras
- max. yes
- unit switch: m, in, ft
- laser type: class II, 630–670 nm, <1 mW
- automatic laser shut-off: 20s (one measurement)
- automatic shut-off: approx. 150 s
- battery life: up to 8,000 measurements
- storage temperature: -20 °C to 60 °C
- operating temperature: 0 to 40 °C
- Storage humidity: 20 to 80 %RH
- Power supply: 3.7 V, 370 mAh/6.5 x 3.7 V, battery dimensions 370 mAh/6. x 19 mm
- Product weight: 75 g
Accessories: Mini laser rangefinder, Type-C cable, manual, wrist strap.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The LM320E digital protractor is a lightweight and portable digital protractor with a durable aluminium alloy frame, ensuring durability during use. It allows you to accurately measure the slope of a surface, effectively replacing a spirit level for construction work – when building roofs, floors or drainage systems. It is equipped with a high-resolution display and automatic screen rotation, covering the entire 4×90° measurement range. The device provides real-time data on the angle of inclination and is fitted with a magnetic base for easy and stable positioning. The default unit of measurement is degrees (°), but other units can also be selected: per cent (%), millimetres per metre, or inches per foot. It is widely used in the fields of engineering, construction and mechanical installations. The device has two lasers built into opposite sides, which can be switched on and off individually and which can project the centre of the digital protractor, for example, onto a wall. The device has a built-in 3.7V, 1000mAh lithium battery, which is charged via the included USB-C cable.
Product specifications:
- Precise digital protractor (inclinometer)
- Aluminium alloy frame, lightweight and portable
- Relative angle measurement
- Relative measurement with 4×90° modes
- Multiple unit options: mm/m, in/ft, %, °
- 1000 mAh rechargeable lithium battery
- Rotating display with LED backlight
- fitted with magnetic bases
- laser pointer
- certification: CE, RoHS
- language: English
>
Technical parameters
range: 4 x 90°
- measurement resolution: ± 0.05°
- angle measurement accuracy: ± 0.2°
- Units of measurement: °; %; mm/m; in/ft
- laser indication: yes, two built-in lasers
- laser accuracy: ± 3 mm / 5 m
- magnetic attachment to base: double-sided magnet (bottom and back)
- angle measurement modes: relative/absolute measurement
- Hold angle: yes/automatic screen lock
-/> yes
- material: AL alloy frame + ABS
- power supply: 3.7 V / 1000 mAh lithium battery
- operating temperature: 0°C to 50°C
- laser class: 2
- laser type: 630–670 nm, <1 mW
- battery life
8 hours:
- 8 hours of battery life. 70 x 35.5 mm
- net product weight: 180 g
- Product colour: black and red
Contents of individual packaging:
- Digital report
- USB-C extension cable
- User manual:
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The LM320D digital protractor is a lightweight and portable digital protractor with a durable aluminium alloy frame, ensuring durability during use. It allows you to accurately measure the slope of a surface, effectively replacing a spirit level for construction work – when building roofs, floors or drainage systems. It is equipped with a high-resolution display and automatic screen rotation, supporting the full 4×90° measurement range. The device provides real-time data on the angle of inclination and is fitted with a magnetic base for easy and stable positioning. The default unit of measurement is degrees (°), but other units can also be selected: per cent (%), millimetres per metre, or inches per foot. It is widely used in the fields of engineering, construction and mechanical installations. The device has a built-in 3.7 V, 1000 mAh lithium battery, which is charged via the included USB-C cable.
Product specifications:
- Precise digital protractor (inclinometer)
- Aluminium alloy frame, lightweight and portable
- 4×90° relative angle measurement
- 4×90° relative measurement modes
- Multiple unit options: mm/m, in/ft, %, °
- 1000 mAh rechargeable lithium battery
- Rotating display with LED backlight
- fitted with magnetic bases
- certification: CE, RoHS
- Language: English
measurement range:
Technical parameters: x-4 90°
- measurement resolution: ± 0.05°
- angle measurement accuracy: ± 0.2°
- Units of measurement: °; %; mm/m; in/ft
- laser indication: no
- laser accuracy: no
- magnetic attachment to base: double-sided magnet (bottom and back)
- angle measurement modes: relative/absolute measurement
- angle hold: yes
- Screen rotation: yes
- Auto-off material: alloy frame: ABS
- power supply: 3.7 V / 1000 mAh lithium battery
- Operating temperature: 0 °C to 50 °C
- laser class: no
- laser type: no
- Battery life: 14 hours
- Product dimensions: 83.5 x 70 x 50 mm
- Net product weight: 35.8 g
- 0 g
- Colour: black and red
Contents of individual packaging:
- Digital report
- USB-C extension cable
- user manual:
MANUFACTURER: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T LM1500 Distance and Speed Meter
This product comes with a 3-year warranty. The LM series laser rangefinder can accurately measure distance, height and angle. The speed measurement function uses a low-power pulsed laser, which is harmless to the human eye. The LM1500 has a built-in battery, 7x magnification, a maximum measurable distance of 1372m (1500yd) and a height of 549m (600yd). These rangefinders are suitable for various inspections, construction, navigation, golf, hunting, etc.
Technical specifications:
Distance range 4,572 ~ 1,371.6 m (5 ~ 1,500 yd)
Accuracy ± 0.9144 m DX
Lens size 25mm
Height 548.64 m (600 yd)
Elevation deviation ± 0.45 m (0.5 yd)
Speed range 0–300 km/h
Angle ± 45°
Angle deviation 1–3°V
Angle 1–300 km/h
Battery 1500mAh
Weight 230g
Dimensions 114mm x 76mm x 48mm
Standard accessories Carrying case, lanyard, USB cable
Product specifications:
Laser with pulses harmless to the human eye
Automatic measurement of eye distance
F>D stop
Standard accessories Carrying case, lanyard, USB cable
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The LM120A laser rangefinder is a small, compact and unique tool, ideal not only for DIY enthusiasts but also for professionals, helping you to quickly measure any space. It can measure distance, area and volume. The instrument has four modes that use Pythagoras’ theorem to measure the distance of a side of a triangle, which is convenient for users to take indirect measurements in a complex environment. Measurement values for a distance can also be added or subtracted, and the measured data can be stored in the device’s memory.
Product specifications:
- clear LCD display
- auto-off function
- measurement from the front or the end of the instrument
Measuring range:-
Technical specifications:/>
120 m
- measurement accuracy: ±(2 mm + 5 × 10⁻⁵ D)
- continuous measurement: yes
- Area/volume measurement: yes
- Pythagorean measurement: yes
- addition/subtraction: yes
- Area/volume addition/subtraction:
-/max. self-calibration: yes
- laser type: class II, 630–670 nm, <1 mW
- data storage: 99 groups
- automatic laser shut-off: 20s (one measurement)
- automatic switch-off: approx. 150 s
- battery life: up to 8,000 measurements
- audible alarm: yes
- Storage temperature: -20˜ ~ 60 °C
- Operating temperature: 0–40 °C
- Storage humidity: 20–80% RH
- Power supply dimensions: 1 V: 1 V
- 2 x 1 AA: 50 x 25 mm
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The LM series laser rangefinder can accurately measure distance, height and angle. The speed measurement function uses a low-power pulsed laser, which is harmless to the human eye. The LM1000A model has a built-in battery, 6x magnification, a maximum measurable distance of 1000m and a height of 450m. These rangefinders are suitable for various inspection tasks, construction work, navigation, golf, hunting, installation of energy equipment, etc.
Product specifications:
- pulsed laser harmless to the human eye
- compact and portable
- rapid distance measurement
- 2.0-inch
- multifunctional display
- high-precision LCD
- automatic shut-off
- measurement of slope, height, volume, area, angle
- golf course compensation mode
Technical specifications:
- Distance range: 3 ~ 1000 m
- accuracy: ±1 m ± 2% of range - 2% of range:
- adjustment range: ±6°
- Altitude: 450 m
- Speed range: 18 – 300 km/h
- angle: ± 45°
- lens size: 21.5 mm
- angular deviation: ± 1°
- laser class: class 1
Operating temperature
90–10 °C to 50 °C
- Power supply: 3.7V, 750mAh lithium battery
- Product colour: black + silver
- weight: 171 g
- dimensions: 108 mm x 72.5 mm x 42.2 mm
- standard accessories: carrying case, USB cable, wrist strap
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T LM1000 Distance and Speed Meter
This product comes with a 3-year warranty. The LM series laser rangefinder can accurately measure distance, height and angle. The speed measurement function uses a low-power pulsed laser, which is harmless to the human eye. The LM1000 features a built-in battery, 7x magnification, a maximum measurable distance of 915m (1000yd) and a height of 412m (450yd). These rangefinders are suitable for various inspections, construction, navigation, golf, hunting, etc.
Technical parameters:
Distance range 4.572 ~ 914.4 m (5 ~ 1000 yd)
Accuracy ± 0.9144 m DX
Lens size 25 mm
Height 411.48 m (450 yd)
Elevation deviation ± 0.45 m (0.5 yd)
Speed range 0–300 km/h
Angle ± 45°
Battery angle deviation ± 1° - 3 V, 1500 mAh
Weight 230 g
Dimensions 114 mm x 76 mm x 48 mm
Product specifications:
Laser with pulses harmless to the human eye
Fast distance measurement/LCD display
Accessories/auto-off>
USB cable, auto-off,
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The LM70A laser rangefinder is a small, compact and unique tool, suitable not only for DIY enthusiasts but also for professionals, which will help you quickly measure any space. It can measure distance, area and volume. The instrument has four modes that use the Pythagorean theorem to measure the distance of a side of a triangle, which is convenient for users to take indirect measurements in a complex environment. Measurement values for a distance can also be added or subtracted, and the measured data can be stored in the device’s memory.
Product specifications:
- clear LCD display
- auto-off function
- measurement from the front or the end of the instrument
Measuring range:-
Technical specifications:/>
70 m
- measurement accuracy: ±(2 mm + 5 × 10⁻⁵ D)
- continuous measurement: yes
- Area/volume measurement: yes
- Pythagorean measurement: yes
- addition/subtraction: yes
- Area/volume addition/subtraction:
-:- yes/max/min:- self-calibration: yes
- laser type: class II, 630–670 nm, <1 mW
- data storage: 99 groups
- automatic laser shut-off: 20s (one measurement)
- automatic switch-off: approx. 150 s
- battery life: up to 8,000 measurements
- audible alarm: yes
- Storage temperature: -20˜ ~ 60 °C
- Operating temperature: 0–40 °C
- Storage humidity: 20–80% RH
- Power supply dimensions: 1 V: 1 V
- 2 x 1 AA: 50 x 25 mm
