10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT8805E is a desktop digital multimeter with a maximum display range of 199,999, featuring optional automatic or manual measurement, a colour display and a true RMS measurement function. Its circuit design utilises large-scale integrated (LSI) analogue-to-digital (A/D) converters, a microprocessor, multifunctional measurement and highly stable thin-film resistor manufacturing technology, making it a digital multimeter with excellent performance. In addition, it features data storage, maximum/minimum/average measurement, comparison measurement, relative value measurement, peak value detection, trend graphing, and the ability to record and read up to 10,000 data records. Display of measurement results using bar graphs of readings or trend graphs. The display allows for dual data display; for example, when measuring AC voltages or currents, it also displays the frequency; when measuring temperature, it also displays the thermocouple resistance, etc.
It is a state-of-the-art electrical measuring instrument, suitable for use in electronics, communications, manufacturing, national defence, power generation, chemistry and other industries. This device strictly complies with safety standards IEC61010-1, EN61010-2-030, pollution degree II, overvoltage CAT I 1000V, CAT II 300V, double insulated, waterproof and dustproof with IP65 protection. It is an indispensable experimental instrument for various colleges.
Product specifications:
- display type: 4.3" diagonal TFT-LCD with a resolution of 480 x 272 px
- number of display locations: 200,000
- measurement speed: 2nd; readings/measurement: 0.5000 10 readings/s; 5000 readings/s)
- dual display: yes, simultaneous display of two quantities
- DC voltage measurement: ranges from 200mV to 1000V
- DC current measurement: ranges from 200μA to 10A
- AC voltage measurement: 200 mV to 200 V AC
- ranges
- True-RMS AC current measurement: ranges from 2mA to 10A
- Resistance measurement: ranges from 200Ω to 100MΩ (optional 2- and 4-wire resistance measurement)
- Capacitance measurement: ranges from 2nF to 2000μF, frequency range: 1MH/2000μF AC
- Circuit continuity and diode test: yes
- Temperature measurement: with built-in thermocouple with cold-junction compensation
- External thermocouple temperature measurement: yes, preset conversions for ITS-90, Pt100, and K, N, R, J, T, R, J, R, J thermocouples
- various mathematical operations: maximum, minimum, average, standard deviation, pass/fail, dBm, dB, relative measurement, histogram, trend graph, bar chart
- supports USB, GPIB, RS-232C and LAN interfaces, USB-TMC, IEEE 488.1, compatible with the IEEE 488.1 command language and SCPI standard on VXI1/2 SCPI-test set for the main multimeter
- recording and storage of historical data
- option to save data and configure settings to a USB drive
- 1 GB NAND FLASH storage, high-capacity memory system and test data
- menu in English and Chinese and online help system
- software for the host PC
- wide range of supply voltage parameters
>-
-
measured voltage: 1000 V (DC) / 750 V (AC)
- 10 A input terminal protection: (CE) F1, internal slow-blow fuse 10 A / 250 V
- μA, mA input terminal protection: (CE) F2, 250mA/250V fast-acting fuse, 4-digit icon display
FT. display; maximum value 200,000, 480 x 272 pixels
- range selection: automatic or manual
- polarity display: automatic
- mathematical operations: Pass/Fail, Relative, min/max/average, standard deviation, dBm, dB, Hold, histogram, trend graph, bar graph/measurement
ranges:
- 1. DC voltage measurement (range / input impedance / accuracy % (90 days) / (1 year)):
200,000 mV / 10 MΩ or >10 GΩ / 0.008+0.004 / 0.01+0.004 / 0.01+0.004 / 10 Ω 0.004 / 10 Ω 0.008+0.003 / 0.01+0.003
20.0000 V / 10 MΩ or >10 GΩ / 0.008+0.004 / 0.01+0.004
200.000 V / 10 MΩ / 0.0003 + 0.003 Ω / 0.0003
1000.00 V / 10 MΩ / 0.012+0.003 / 0.015+0.003
- 2. DC current measurement (range / input voltage drop / accuracy % (90 days) / (1 year)):
200.00, 0.50 μA /
/ 0.055+0.005
2.00000 mA / <0.3 V / 0.050+0.005 / 0.055+0.005
20.0000 mA / <30 mV / 0.070+0.020 / 0.020 / 0.020 / 0.020
0.3 V / 0.060+0.008 / 0.070+0.008
2.00000 A / <0.1 V / 0.150+0.020 / 0.170+0.020
10.0000 A / <0.3 V /+ / 0.0200 0.250+0.010
- 3. Resistance measurement (ranges / max. test current / accuracy % (90 days) / (1 year)):
200,000 Ω / 1mA / 0.012+0.005 / 0.030+0.005 / 0.030+0.0200 Ω / 0.000 Ω / 0.000 Ω 0.012+0.003 / 0.020+0.003
20.0000 kΩ / 100μA / 0.012+0.003 / 0.020+0.003
200,000 kΩ / 10 μA / 0.002+0.002+0.0020.003
2.00000 MΩ / 1 μA / 0.020+0.004 / 0.040+0.004
10.0000 MΩ / 500 nA / 0.100 + 0.004 / 0.250 + 0.004 / 0.250 + 0.004
10,000 MΩ / 500 nA / 0.100+0.004 / 0.250+0.004
100 MΩ / 000 000 ▀ 0.004 10 MΩ / 0.800+0.004 / 1.75+0.004
- 4. True RMS AC voltage measurement (ranges / frequency range / accuracy % (90 days) / (1 year)):
200,000 mV / 20 Hz / 20 Hz + 0.1–0.5 Hz / ¾ 1.5+0.1
45 Hz to 20 kHz / 0.19+0.05 / 0.2+0.05
20 kHz to 50 kHz / 1.0 ± 0.05 / 1.0 ± 0.05
50 kHz /+0.050 kHz /+0.10 kHz 3.0+0.05
2.00000 V / 20 Hz to 45 Hz / 1.5+0.10 / 1.5+0.10
45 Hz to 20 kHz / 0.19+0.05 / 0.2+0.0,20 kHz / 0.20 kHz / 0.10 1.0+0.05 / 1.0+0.05
50 kHz to 100 kHz / 3.0+0.05 / 3.0+0.05
20.0000 V / 20 Hz to 45 Hz / 1.5+0.10+6 / 10.5+0.05
20 kHz / 0.19+0.05 / 0.2+0.05
20 kHz to 50 kHz / 1.0+0.05 / 1.0+0.05
50 kHz to 100 kHz / 3.0+0.05 / 0.05,><0.02,
V / 20 Hz to 45 Hz / 1.5+0.10 / 1.5+0.10
45 Hz to 20 kHz / 0.19+0.05 / 0.2+0.05
20 kHz to 50 kHz / 1.0,+0.0,0.0, 0.05 kHz to 100 kHz / 3.0+0.05 / 3.0+0.05
750,000 V / 20 Hz to 45 Hz / 1.5+0.10 / 1.5+0.10
45 Hz to 20.5190 / 20.190 kHz
20 kHz to 50 kHz / 1.0+0.05 / 1.0+0.05
50 kHz to 100 kHz / 3.0+0.05 / 3.0+0.05
- 5. True RMS / AC frequency range / measurement range 100 kHz / 10 days / current ():
2.00000 mA / 20 Hz to 45 Hz / 1.5+0.10 / 1.5+0.10
45 Hz to 2 kHz / 0.5+0.10 / 0.5+0.10
2 kHz / 2 kHz + 0.10, 5 kHz / 2 kHz 2.5+0.20
200.000 mA / 20 Hz to 45 Hz / 1.5+0.10 / 1.5+0.10
45Hz to 2kHz / 0.5+0.10 / 0.5+0.10 kHz / 2kHz> / 0.5+0.10kHz> 2.5+0.20 / 2.5+0.20
200,000 mA / 20 Hz to 45 Hz / 1.5+0.10 / 1.5+0.10
45 Hz to 2 kHz / 0.3+0.10 / 0.10 / 1 Hz
2.00000 A / 20 Hz to 45 Hz / 1.5+0.20 / 1.5+0.20
45 Hz to 2 kHz / 0.5 ± 0.5 2 kHz to 10 kHz / 2.5 ± 0.20 / 2.5 ± 0.20
10.0000 A / 20 Hz to 45 Hz / 1.5+0.15 / 1.5+0.15
45 Hz to 2 kHz / +0.5, 5, 5 / 1.5
2 kHz to 10 kHz / 2.5+0.20 / 2.5+0.20
- 6. Capacitance measurement (ranges / max. test current / accuracy % (90 days) / (1 year)):
2,000 nF / 0.5 μA + 1.0 / 0.5 μA + 1.02
20.00 nF / 1 μA / 1+0.5 / 1+0.5
200.0 nF / 10 μA / 1+0.5 / 1+0.5
2,000 μF / 100 μA / 1+0.5 / 1+0.5 /+0.5 /+0.5 μF / 0.5 / 0.5 μF 1+0.5
200.0 μF / 1 mA / 1+0.5 / 1+0.5
2,000 mF / 1 mA / 2+0.5 / 2+0.5
- 7. Temperature measurement (thermocouple type / cell temperature range / accuracy): an) α=0.00385 / -200°C to 660°C / 0.16°C
B / 0°C to 1820°C / 0.76 °C
E / -270°C to 1000°C / 0.5 °C
J /°C / -200°C / -200°C
K / -270°C to 1370°C / 0.5 °C
N / -270°C to 1300°C / 0.5 °C
R / -50°C to 1760°C / 0.5 °C
S / -50°C to /17.6°C
-270°C to 400°C / 0.5°C
- 8. Frequency and duty cycle measurement (ranges / accuracy % (90 days) / (1 year)):
20 Hz to 2 kHz / 0.01 + 0.003 / 0.01 + 0.02 kHz / 0.02 kHz / 0.02 kHz / 0.02 kHz / 0.01 + 0.003 / 0.01 + 0.003
20 kHz to 200 kHz / 0.01 + 0.003 / 0.01 + 0.003
200 kHz to 1 MHz / 0.01 + 0.001 AC / 0.001 + 0.005 AC in the voltage range 200 mV to 750 V.
- 9. Circuit continuity and diode testing
A constant current source of 1 mA ± 5% is used to measure the resistance or voltage drop across the diode.
The open-circuit voltage is < 8V. The circuit continuity measurement threshold is adjustable. Buzzer indication option
buzzer.
General characteristics and mechanical properties:
- power supply: AC 90V–110V, 45–440Hz; AC 110V–132V, 45–440Hz; AC 200V–240V, 45–66Hz; AC 216V–264V, 45–66Hz
- power consumption: max. 20W
- operating environment: 0°C–28°C <90%; 28°C–40°C <75%; 40°C–55°C <50% (non-condensing)
- Altitude: ≤2000 m
- Dimensions: 260 mm x 116 mm x 332 mm
- Weight: 4.4 kg
- Colour: off-white and grey
> Individual multimeter packaging contents:
> UT8805E: 1 pc
- three-core power cable: 1 pc
- Test leads: 1 pair
- USB connection cable: 1 pc
- RS232 connection cable: 1 pc
- UT8805E quick start guide: 1 pc
- PC warranty card: UT8805 PC:-1805 PC:-1805 set
MANUFACTURER: UNI-TREND
https://instruments.uni-trend.com/EU-EN/multimeters/ut8000e.html
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT8803E Digital Bench Multimeter
This product comes with a 3-year warranty.
UT8802E Digital Bench Multimeter:
True RMS
Diode/transistor
SCR Thyristor Test
LCD measurement interface EBBTN
EBBTN
Screen inductance
Data hold
MAX/MIN
Continuity buzzer
Specifications Model UT8803E:
DC voltage (V): 1000V
AC voltage (V): 750V
DC current (A): 20A
Resistance
20A
(Ω): 60MΩ
Capacitance (F): 6mF
Frequency (Hz): 600Hz–20MHz
Duty cycle (%): 5%–95%
Inductance (H): 100H
Temperature (°C/°F): -40.0 ℃ -40℉~1832℉
Display range: 6000
Interface: USB device
Range: Auto
True RMS/diode: √
Frequency response (Hz): Up to 100kHz
9V SCR test, non-directional and bidirectional measurement
Buzzer/data hold: √
MAX/MIN: √
USB interface/LCD backlight: √
Input impedance for DCV: 600mV range: approx. 3GΩ; all other ranges: approx. 10MΩ
AC+DC measurement: √
General features:
Power: 100V/120V/220V/240V ±10%, 47Hz–63Hz
Net weight of LCD:
EBTN.
Product dimensions: 265mm x 110mm x 320mm
Standard accessories: USB interface cable, power cable, single-ended test lead with alligator clips, standard test leads, PC software CD, spot contact temperature probe
Standard individual packaging: cardboard box
Standard quantity per box: 8 pcs. 330 mm x 320 mm
Standard gross weight per box: 6.18 kg
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT8802E Digital Bench Multimeter
This product comes with a 3-year warranty.
UT8802E Digital Bench Multimeter:
True RMS (UT8803E)
Diode/transistor
USB interface
LCD screen
EBTND
hold down
MAX/MIN
Continuity buzzer
Specifications Model UT8802E:
DC voltage (V): 200mV/2V/20V/200V/1000V
AC voltage (V): 2V/50V/20V DC: (V/7/50V) 200μA/2mA/20mA/200mA/20A
AC current (A): 2mA/20mA/200mA/20A
Resistance (Ω): 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ Capacitance (F): 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
Frequency (Hz): 200Hz–10MHz
Duty cycle (%): 5%–99%
Inductance (H): - (°C/>Operating temperature): — (°C/>Operating temperature) 20000
Interface: USB device
Range: Manual
True RMS/diode: √
Frequency response (Hz): 1kHz
Buzzer continuity/data hold: √
MAX/MIN: √
USB backlight interface:/√ Input
USB interface:/√ Backlight:/LCD DCV: Approx. 10MΩ
AC+DC measurement: √
General features:
Power: 100V/120V/220V/240V ±10%, 47Hz~63Hz
Net weight of LCD: EBTN: 7kg.
Product dimensions: 265mm x 110mm x 320mm
Standard accessories: USB interface cable, power cable, single-ended test lead with alligator clips, standard test leads, PC software CD,
Standard individual packaging: cardboard box
Standard quantity per box: 2 pcs
Standard gross weight per box: 6kg
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT802 bench multimeter is a multifunctional electronic measuring instrument. It meets the requirements for measuring electrical parameters during the maintenance of electronic devices, offering high precision and ease of use. Its advantages include numerous functions and the ability to operate even outside the 230V mains supply range, as it can also run on batteries. The device features a backlit LCD display with a display range of ±19999. The device is manufactured in accordance with IEC 61010-1 standards and complies with CAT II 1000V.
Product specifications:
- large backlit LCD display, measuring 108 x 34.5 mm, with a maximum display range of 19999
- with a single-range circular switching/measuring function
- circular switching/measurement
AC/DC voltage and current, resistance, capacitance, frequency and temperature
- Measurement of semiconductor junctions: diodes and transistors
- measurement of transistor hFE parameters
- circuit continuity testing with buzzer
- Data Hold function
- Power supply via AC/20m3V20 adapter or 1.5 V DC batteries; R14
- storage space for the adapter
Technical specifications:
- DC voltage measurement in the range: 200 mV to 1000 V with an accuracy of ±(0.1% + 3)
- AC voltage measurement in the ranges: 5 to 20 V up to 70 V ±(0.5%+20)
- DC current measurement in the ranges: 200 µA to 10 A with an accuracy of ±(0.5% + 20)
- DC current measurement in the range: 2 mA to 10 A with an accuracy of ±(0.8% + 40)
Resistance measurement in the range 20Ω to 0Ω: 200MΩ with an accuracy of ±(0.5%+10)
- Capacitance measurement in the range: 20nF to 200µF with an accuracy of ±(4%+10)
- Frequency measurement in the ranges: 2kHz and 200kHz with ±(0.1) – 200kHz with a measurement accuracy in the temperature range of ±(0.1) – 40°C to 1000°C with an accuracy of ±(1.2%+25)
- Input impedance for DC ranges: approx. 10 MΩ
- automatic polarity display: yes
- low battery warning: yes
- included in delivery is a type K temperature probe for temperatures up to +230°C
- operating environment: 0°C to 40°C
- Storage temperature: -10°C to 50°C
- Relative humidity: 75% in the temperature range from 0°C to 30°C; max 50% in the temperature range from 30°C to 40°C
- dimensions: 300 x 245 x 105 mm
- weight without accessories: 1.5 kg
- weight with accessories: 1.65 kg
- product colour: red and green
Device contents:
2:
2 1 pc
- 230V AC/9V DC/200mA adapter: 1 pc
- International adapter for power supply: 1 pc
- 1.5V battery, R14: 6 pcs
- Type K contact temperature probe: 1 pc
- measurement cables: 1 pair user manual
- 1 pair
> pcs
Wholesale package contents:
- number of units in a standard box: 4 pcs
- standard carton dimensions: 680 x 365 x 320 mm
- weight of standard box: 11.7 kg
TREND
-
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT801 Digital Bench Multimeter
This product comes with a 3-year warranty. SPECIFICATIONS:
DC voltage: 200mV/2V/20V/200V/1000V +/- (0.5%+2)
AC voltage: 2V/20V +/-/0V/-/0V (0.8%+3)
DC currents: 200μA/2mA/20mA/200mA/10A +/- (0.8%+2)
AC currents: 2mA/20mA/200mA/10A +/- (1.0%+3)
Resistance: 200 Ω/2 kΩ/20 kΩ/200 kΩ/2 MΩ/20 MΩ ± (0.8%+3)
Capacitance: 20nF/2uF/200uF +/- (4%+3)
Frequency: 2kHz/+3%: temperature
SPECIAL FUNCTIONS:
Transistor
Off mode
Diode
Continuity buzzer
Display backlight
REL
Sleep mode
Max/Min
Display for maximum/minimum battery voltage
Measurement: >10 MW
Data hold
Max. Display: 1999
GENERAL FEATURES:
Power supply: AC220V/50Hz or 6 x 1.5V batteries (R14)
LCD size: 108 x 35mm
Product colour: red and grey
Net product dimensions:
Product weight: 1000g 245 x 105 mm
Standard accessories: test lead, AC220V power cable, English manual, contact probe, temperature probe, multi-function socket
/en/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT683B Cable Tester Kit is a portable TDR cable tester, suitable for copper cables (CAT 5E, CAT 6, CAT 6A or CAT 8), which is used to detect and diagnose the connection status of twisted pair and coaxial cables, network pair services, short cables/detection, cabling, network pairs, cabling and faulty cables, etc. It can also be used to detect whether there is a PoE source (POE mode) in the network cabling and the PoE standard (802.3AF, 802.3AT, 802.3BT). A wiring diagram, cable length, location of the broken circuit and other information can be displayed simultaneously on the screen. The cable tester is characterised by accuracy, ease of use and a clear display, making it an ideal tool for network communications maintenance.
Product parameters:
- testing twisted pair network cabling
- cable length test
- TDR technology
- tests RJ11, RJ11 and RJ45 cable types
poxial
500m
- resolution 0.33 m
- 70V DC input protection
- 2.8-inch backlit LCD display
- graphical interface
Technical parameters:
Type of cable tested:
- Twisted pair cable.
twisted-pair cable.
FTP (aluminium foil-shielded cable);
3. SSTP (double-shielded network cable);
- coaxial cable: 50Ω, 75Ω, 93Ω
Cable length test:
- range: 500 m
- resolution: 0.3%, accuracy
-3 m
POE detection:
- POE power detection
- POE standard: 802.3AF
- POE standard: 802.3AT
- Ethernet port test
- Cable location test √
- 70VDC LCD input protection
- Automatic screen shutdown
-2. approx. 10 minutes
- Operating temperature: 0–45 °C
- Storage temperature: -20–60 °C
- Operating humidity: 20–75% relative humidity
- Storage humidity: 10–90% relative humidity
- Altitude ≤ 2000 mDR x 8 x 8 mm cable tester 39 mm
- Receiver dimensions: 197 mm x 48 mm x 34 mm
- cable tester weight: 360 g
- Receiver weight: 127 g
- Power supply: 4 x AAA alkaline batteries (LR03)
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT683KIT cable tester is a smart cable detector comprising a transmitter and a receiver. The receiver can quickly and accurately locate the target cable. This kit can automatically identify open circuits, short circuits, polarity and other conditions to help you quickly identify cable faults. It is an ideal device for integrated connection, installation and maintenance of low-voltage electrical systems.
Product parameters:
- network cable monitoring
- telephone line monitoring
- electrical cable monitoring
- testing: RJ45 cable, RJ11 cable
-/>- flash ON function
-/>-V lamp OFF
-/>-V switch
- polarity indicator
- sensitivity setting
Technical specifications:
- power supply: 3.7 V / 1050 mAh rechargeable lithium battery
- signal mode: modulated signal (125 kHz carrier)
- (connection range)
- 300 m (visual mode)
- Switch monitoring range: ≥100 m (connected mode)
- Operating temperature: -10°C – 50°C
- operating humidity: 20–75% relative humidity, non-condensing
- operating altitude: 2,000 m
- Transmitter dimensions: 2 × 130 mm; Receiver dimensions: 197 mm × 48 mm × 34 mm
- Transmitter weight: approx. 95 g
- Receiver weight: approx. 127 g
- Operating time: transmitter > 8 hours, receiver > 5 hours
- Package contents: transmitter, receiver, USB charging cable, RJ1 adapter, RJ11 adapter, RJ1 to RJ45 adapter, RJ45 adapter cable, instructions, packaging
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT682D Cable Tester
This product comes with a 3-year warranty. UT682D Wire Tracker
The UT682 Wire Tracker consists of a transmitter and a receiver and is capable of tracing Ethernet, telephone and power cables without stripping the insulation. The UT682 can troubleshoot Ethernet cables and is a recommended tool for troubleshooting communication cables and audio/video cables
Specifications:
Wire tracking features
Wire types: twisted pair telephone line
Telephone line tracing distance: ≥30/>000m of telephone lines for DC function, range: ±(5V~52V)
Distinguishes between telephone lines and LAN cables Distinguishes between plugs √
Transmitter output voltage: 8V DC with a new battery
Transmitter power supply: 9V battery
Receiver power supply: 9V battery
Maximum operating current of the receiver A/√ max. <40mA (AC, RMS) √
Transmitter input voltage protection: 60V DC
Operating environment:
Operating temperature: 0–40°C; Storage temperature: –10–50°C
Operating humidity: 20–75% RH; Storage humidity: 10–90% RH; Altitude: ≤2000 m
General features:
Product colour: Red and grey
Net product weight: Transmitter-150g, Receiver-130g
Product dimensions: Transmitter – 74mm x 68mm x 28mm, Receiver – 208mm x 3mm x 308mm> Accessories: 9V battery x 2
Standard individual packaging: English manual
Standard quantity per box: 20 pcs
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT682 UTP Cable Tester (RJ45)
This product comes with a 3-year warranty. The UNI-T UT682 wire tracing system consists of a transmitter and a receiver. It features functions such as telephone wire tracing, network cable tracing (RJ45/UTP), cable tracing, network cable testing, etc., and offers fast and accurate measurement. The UT682 is an ideal tool for personnel involved in the installation and maintenance of low-voltage systems, such as communication cables and integrated circuits.
FEATURES:
Product name: Wire Tracker
Power supply: 9V battery (NOT included)
Signal transmission mode: multi-frequency pulse
Telephone line short circuit test
Open circuit polarity test
√
Audio signal test range: ≥1000m
Video line distance: ≥100m
Low battery indicator (transmitter): √
Telephone line monitoring function
A. Connect the telephone line plug to the transmitter’s RJ11 interface;
B. Set the transmitter’s function selector switch to the ‘TEST’ position. The ‘Status’ line tracing indicator will light up, indicating that the transmitter is operating correctly;
C. Hold down the receiver’s “Press to Test” button and search for the target cable with the receiver’s probe.
D. During testing, gently press the “Switch” button to toggle between single and dual audio test modes.
Network line tracing function
A: Connect the network line with a crystal head to the transmitter’s RJ45 interface;
B. Set the transmitter’s function selector switch to the “TEST” position; the “Status” line tracing indicator will flash, indicating that the transmitter is functioning correctly;
C. Hold down the receiver’s ‘Press to Test’ button and search for the target cable with the receiver’s probe.
D. During testing, gently press the “Switch” button to toggle between single and dual audio test modes.
Power cable line tracing function (the power cable must not be live)
A. Connect the transmitter to the metal cable using crocodile clip adapter cables;
B. Set the transmitter’s function selector switch to the ‘TEST’ position; the ‘Status’ line tracing indicator will flash, indicating that the transmitter is functioning correctly;
C. Hold down the receiver’s “Press to Test” button and search for the target cable with the receiver’s probe.
D. During testing, gently press the “Switch” button to toggle between single and dual audio test modes.
ACCESSORIES:
1 x UNI-T UT682 transmitter
1 x UNI-T UT682 receiver
1 x RJ11 adapter cable
1 x RJ11 adapter cable
1 x Croco45 adapter cable
1 x RJ11 adapter cable
1 x canvas bag
1 x user manual in English
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT681L Cable Tester (RJ45, RJ11)
This product comes with a 3-year warranty. Product specifications and features:
- tests Ethernet cables and telephone lines
- equipped with an RJ45 interface for Ethernet cables and an RJ11 interface for testing Ethernet/unshielded cables
Shielded test
- visible LED indication
- automatically checks for open circuits, short circuits and cross-connections
- Can switch between fast and slow test modes
- Single-button operation
- Manual/automatic shut-off (after 10 minutes of inactivity)
- low battery indicator
- powered by a 9V battery
9V parameters:
- tests RJ45 / RJ11
- fast speed test: LED1-LED8, LED_G
- slow speed test mode: LED1-LED8, LED_G
- power supply: 9V battery
- storage temperature: -10 to 50 °C; operating temperature
--4 °C Humidity: 20–80% RH
- Storage humidity: 10–90% RH
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT681C Cable Tester (RJ45, RJ11, BNC)
This product comes with a 3-year warranty. Product specifications and features:
- tests Ethernet cables and telephone lines
- equipped with an RJ45 interface for Ethernet cables and an RJ11 interface for testing unshielded telephone/Ethernet lines
- shielded test
- visible LED indicator
- automatically checks for open circuits, short circuits and cross-connections
- can switch between fast and slow test modes
- single-button operation
- manual/automatic shut-off (after 10 minutes of inactivity)
- low battery indicator
- powered by a 9V battery
9V parameters:
- tests RJ45, RJ11, BNC - you must use the RJ45 to BNC adapter
- fast speed test mode: LED1-LED8, LED_G
- slow speed test mode: LED1-LED8, LED_G
- power supply: 9V battery
- storage temperature: 5/10˚ storage temperature:
-- storage temperature: 5/10˚ 0-40 ˚C
- Operating humidity: 20–80% RH
- Storage humidity: 10–90% RH
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT681 HDMI Cable Tester
This product comes with a 3-year warranty. Product specifications and features:
- tests HDMI/MINI-HDMI cables
- Fastline connection types: A to A, A to C and C to C
- checks for open circuits, short circuits and cross-short circuits via visible LED indicators
Visible cross-short indicators
- Can switch between scan and full display test modes
- single-button operation
- manual/automatic switch-off (after 10 minutes of inactivity)
- low battery indicator
- Power supplied by a built-in 9V battery
Technical/test parameters:/-
HDMI/MINI-HDMI
- scan test mode: LED1-LED19, LED_S
- Full display test mode: LED1-LED19, LED_S
- Power supply: 9V battery
- Storage temperature: -10 to 50 °C
- operating temperature: 0–40 °C
- Operating humidity: 0–40 °C
- Operating humidity: 10–90% RH
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT675A is a portable tester for automotive lead-acid batteries, allowing you to analyse the condition of batteries with capacities ranging from 30 to 250Ah without removing them. It is equipped with state-of-the-art technology that allows you to measure battery voltage, the car system’s charging currents, the battery’s internal resistance, starting currents, the battery’s remaining capacity as a percentage, and the battery’s remaining service life as a percentage. Before starting the test, you must select the battery type – standard lead-acid battery, AGM flat battery, AGM spiral battery, gel battery, EFB battery and standard battery – CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah. If the standard cannot be determined, the CCA standard is selected, for example 60Ah, cold cranking current 500A, and tested.
Product parameters:
- 12V lead-acid car battery tester for various models
- allows testing of 12V to 24V charging systems with an LCD screen
- 128 x 64 pixels
- Test mode settings: battery test, start-up test, charge test, results display, results printout, system settings
- System time setting
- Built-in printer for printing values in real time
- Data transfer via USB interface
- CE, FCC, RoHS certification
:
- Technical test parameters for 12V lead-acid batteries: yes
- Battery types tested: standard lead-acid battery, AGM flat battery, AGM spiral battery, GEL battery, EFB battery
- Measurement standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah
- Battery capacity tested: 3 to 24V/25V-Ah for charging system testing: yes, including alternator diode test
- for testing 12V / 24V starting systems: yes
- System time setting: yes, (year, month, day, hour, minute)
- Power supply: from the battery under test
- Voltage display: 7.00 V to 16.00 V
- 0 V (battery test)
- 0 V to 30.00 V (start-up/charging test)
- high voltage protection: yes
- reverse polarity protection: yes
- Faulty contact information: yes
- battery status display: yes
- battery life display: yes
- Battery capacity display: yes
- Internal battery selection display: yes (English)
- Operating temperature: -20 °C to +50 °C
- Transfer of the last data set to a computer: yes, after downloading the software to the computer
- Net product weight: 413 g
- Product dimensions: 95 x 47 x 183 mm
- Product colour: red and grey
Contents of individual packaging
:
- UT675A device: 1 pc
- USB interface cable: 1 pc
- printing paper: 3 pcs
- Cloth bag: 1 pc
- User manual: 1
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT673A is a portable tester for lead-acid car batteries, allowing you to analyse the condition of batteries with capacities ranging from 30 to 250 Ah without removing them. It is equipped with state-of-the-art technology that allows you to measure battery voltage, the car system’s charging currents, the battery’s internal resistance, starting currents, the battery’s remaining capacity as a percentage, and the battery’s remaining service life as a percentage. Before starting the test, you must select the battery type – standard lead-acid battery, flat AGM battery, spiral AGM battery, gel battery, EFB battery and standard battery – CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah. If the standard cannot be determined, the CCA standard is selected, for example 60Ah, cold cranking current 500A, and tested.
Product parameters:
- 12V lead-acid car battery tester for various models
- allows testing of 12V / 24V systems with vehicle charging resolution
- x1 64-pixel display
- Coloured LED indicating the test result
- Test mode settings: Battery test, Start-up test, Charge test, Results display, System settings, Details
- CE, FCC, RoHS certified
Technical parameters:
- For testing 12V lead-acid batteries: - Standard lead-acid batteries, standard GM batteries: battery, AGM spiral battery, GEL battery, EFB battery
- Measurement standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah
- Tested battery capacity: 3 to 250Ah
- For testing 12V/24V charging systems: yes, including alternator/12V testing for 2V/12V starting
- Systems: yes
- Power supply: from the battery under test
- Voltage display: 7.00V to 16.00V (battery test)
- Voltage display: 7.00V to 30.00V (start/charge test)
- high voltage protection: yes
- reverse polarity protection
- reverse polarity indication
- yes
- battery status display: yes
- battery life display: yes
- battery capacity display: yes
- battery internal resistance display: yes
- language selection: yes (Chinese/English)
- Operating temperature: -20 °C to +50 °C
- Net product dimensions: 2/6 x 2 x 2 g
- 142 mm
- Product colour: red and grey
Contents of individual pack:
- UT673A device: 1 pc
- Velcro strap: 1 pc
- user manual: 1 pc
MANUFACTURER
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT667-5m portable industrial borescope with a single lens.
The UT667-5m series large-area industrial endoscope is professionally designed and manufactured to meet market demands for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 5-metre flexible cable and is equipped with LED lighting; the flexible snake tube can be bent into the desired shape. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT667-5m is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- Display: 4.3″ IPS LCD
- 8 LEDs with adjustable brightness:
Battery:--7 cells
- Image rotation
- Flexible cable length: 5 m
Technical specifications:
- Display size: 4.3″
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: black and white image conversion, black and white image conversion,
flexible cable length: 5 m
- probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- Depth of field (DOF): 20 mm to 100 mm
- Light intensity adjustment: 4 LED brightness levels
- + LED field of view
- 8 off
> Lens pixels: 300 K
- Probe protection: IP67
- Power supply: 3.7 V / 2000 mAh battery
- Battery life: 5 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Operating temperature: >-50 °C
- Humidity:
90% RH
- device dimensions: 162 mm x 82 mm x 36 mm
- Product weight: 190 g
Package contents:
- UT667-5m endoscopic camera: 1 pc
- detachable probe with lens/mirror, 1 pc, fixed mirror, mirror clip, 1 pc
- user manual
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT667-10m single-lens portable industrial borescope.
The UT667-10m series large-field-of-view industrial endoscope is professionally designed and manufactured to meet market requirements for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, cavities in building walls, drainage pipes and other hard-to-reach places. The camera probe is located at the end of a 10-metre flexible cable and is equipped with LED lighting; the flexible snake tube can be bent into the desired shape. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT667-10m is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- Display: 4.3″ IPS LCD
- 8 LEDs with adjustable brightness:
- Battery:
camera
- image rotation
- Flexible cable length: 10 m
Technical specifications:
- Display size: 4.3″
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation and black cable conversion, flexible image length, white image conversion and
10 m
- Lens probe diameter: 8 mm
- Light sensor chip: CMOS
- lens field of view (FOV): 70°
- Depth of field (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 levels + 8 illumination lenses
- LED illumination field: pixels: 300 K
- Probe protection: IP67
- power supply: 3.7 V / 2000 mAh battery
- battery life: 5 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- operating temperature:
- humidity
- °C:
90% RH
- device dimensions: 162 mm x 82 mm x 36 mm
- Product weight: 190 g
Package contents:
- UT667-10m endoscopic camera: 1 pc
- detachable probe, 1 magnet, fixed mirror, 1 clip
- user manual
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT667 portable industrial borescope with a single lens.
The UT667 series large-area industrial endoscope is professionally designed and manufactured to meet market requirements for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, cavities in building walls, drainage pipes and other hard-to-reach places. The camera probe is located at the end of a 1-metre flexible cable and is equipped with LED lighting; the flexible snake tube can be bent into the desired shape. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT667 is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- certification: CE, RoHS
- display: 4.3″
- 8 LEDs with adjustable brightness
- battery
IP67
IP66 rotation
- Flexible cable length: 1 m
Technical specifications:
- display size: 4.3″ IPS LCD
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation, black-and-white image conversion, 1 flexible image conversion and zoom
m
- Probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- Depth of field (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 levels + 8 LED illumination pixels
:- LED field of view
>- 8 pixels 300 K
- Probe protection: IP67
- Power supply: 3.7 V / 2000 mAh battery
- Battery life: 5 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Operating temperature: 0 °C to 4 °C
- 4 °C
- 90% RH
- device dimensions: 162 mm x 82 mm x 36 mm
- Product weight: 190 g
Package contents:
- UT667 endoscopic camera: 1 pc
- detachable probe with lens, 1 pc, clip attached
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT665P-5m portable industrial borescope.
The UT665P-5m series industrial endoscope is professionally designed and manufactured to meet market demands for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 5-metre flexible cable and is equipped with LED lighting, whilst the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT665P-5m is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- certification: CE, RoHS
- display: 4.3″
- 8 LEDs with adjustable brightness:
- battery indicator
- 7:
- rotation
- Flexible cable length: 5 m
Technical specifications:
- display size: 4.3″
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation, contrast adjustment, flexible image conversion, brightness, black and white, and screen zoom
Length: 5 m
- probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- Lens focus (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 LED brightness levels
- + field of view
- 8 LED pixels per lens: 300 K
- Probe protection: IP67
- Power supply: 3.7 V / 2000 mAh battery
- Battery life: 6 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Operating temperature: >-50 °C
- Humidity:
90% RH
- device dimensions: 256 mm x 120 mm x 50 mm
- Product weight: 270 g
Package contents:
- UT665P-5m endoscopic camera: 1 pc
- detachable probe, 1 pc, fixed mirror, 1 pc. clip
- user manual
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT665P-10m portable industrial borescope.
The UT665P-10m series industrial endoscope is professionally designed and manufactured to meet market demands for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 10-metre flexible cable and is equipped with LED lighting, whilst the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT665P-10m is an indispensable tool in the automotive and mechanical industries, repair shops, workshops or construction sites.
Product specifications:
- certification: CE, RoHS
- display: 4.3″
- 8 LEDs with adjustable brightness:
- battery indicator
- 7-way rotation
- Flexible cable length: 10 m
Technical specifications:
- display size: 4.3″
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation, contrast adjustment, zoom in/out via flexible cable, black and white, brightness and screen zoom
length: 10 m
- probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- lens focus (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 LED illumination levels: + 8 LED diode illumination levels
- Lens pixels: 300K
- Probe protection rating: IP67
- power supply: 3.7 V / 2000 mAh battery
- Battery life: 6 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Humidity: < 90% RH
- Device dimensions: 256 mm x 120 mm x 50 mm
- Product weight: 270 g
Package contents:
- UT665P-10m endoscopic camera: - 1 pc.
- hook, side mirror, magnet, fixed clamp
- user manual
- standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT665P portable industrial borescope with a single lens.
The UT665P series industrial endoscope is professionally designed and manufactured to meet market requirements for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 1-metre flexible cable and is equipped with LED lighting; the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT665P is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- Display: 4.3″
- 8 LEDs with adjustable brightness
- Camera battery: Li-Ion
--67° rotation
- Flexible cable length: 1 m
Technical specifications:
- Display size: 4.3″
- System language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation, contrast adjustment, flexible image conversion, brightness and zoom adjustment, black and white, screen brightness and zoom
Length: 1 m
- probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- Depth of field (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 LED brightness levels
- + field of view
- 8 LED pixels: 300 K
- Probe protection: IP67
- Power supply: 3.7 V / 2000 mAh battery
- Battery life: 6 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Operating temperature: >-50 °C
- Humidity:
90% RH
- device dimensions: 256 mm x 120 mm x 50 mm
- Product weight: 270 g
Package contents:
- UT665P endoscopic camera: 1 pc
- detachable probe with lens/mirror, mounting clip, 1 pc.
- user manual
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT663B-3m 360° rotating industrial borescope.
The UNI-T UT663B-3m series industrial borescope is specially designed and manufactured to meet market demands for complex environments that are beyond the reach of the human eye. The camera is equipped with 180° bidirectional rotation, allowing it to navigate around blind spots and adjust angles, making it suitable for various narrow and curved spaces that are difficult to access.
It is used to inspect engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 1-metre flexible cable and is equipped with LED lighting, whilst the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The probe has an IP67 rating and can be submerged in water. The UT663B-3m is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- 5″ HD colour display
- 8 LEDs with adjustable brightness
- Two-way video
->- 180
->- 180° rotation Battery: Li-ion
- High-temperature shutdown protection
- IP67-rated camera
- Flexible cable length: 3 m
Technical specifications:
- Display size: 5″ HD Colour
- Camera resolution: JPG 1920 x 1080 pixels, basic AVI function 1920 pixels: 1920-pixel photo
- Capture, video recording, playback, high temperature warning protection, image rotation, audio recording
- standard storage 32 GB TF (maximum 64 GB)
- Rotation angle: 180° bidirectional
- flexible cable length: 3 m
- lens probe diameter: 8 mm
- light sensor
-
-
light sensor
- 70°
- lens focus (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 levels + off
- field of view illumination: 8 LEDs
- lens pixels: 1000 K
- Probe protection: IP67
- Power supply: 30.0 V / mAh:
- Battery life: 30.00 V 4 h
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- operating temperature: 0 °C to 45 °C
- Humidity: < 90% RH
- Device dimensions: 273 mm x 66 mm x 139 mm Product weight
Contents:
- endoscopic camera
- detachable probe with lens
- 32GB TF card
- user manual
- standard quantity per box: 6 pcs
MANUFACTURER: UNI-TREND
