10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download Technical Datasheet
Download User Manual
Download Certificate of Conformity
The DEYE SUN-6K-SG06LP1-EU-BM2 is a high-performance hybrid inverter designed for efficient energy management and storage in residential photovoltaic systems. With a rated output power of 6 kW, single-phase operation and compatibility with low-voltage 48V batteries, the inverter enables efficient solar energy utilization, surplus energy storage and power supply to household loads according to energy demand.
Equipped with two independent MPPT trackers, the inverter optimizes photovoltaic energy production, including installations where solar panels are positioned on surfaces with different orientations.
The model supports a maximum PV access power of 12,000 W, with a maximum PV input power of 9,600 W, according to the manufacturer's specifications.
Intelligent Energy Management
The inverter integrates energy generated by photovoltaic panels, energy stored in batteries and electricity supplied by the grid into a single system.
With 6 programmable battery charging and discharging time periods, users can adjust system operation according to household energy consumption and electricity tariffs.
48V Battery Compatibility
The DEYE SUN-6K-SG06LP1-EU-BM2 is compatible with low-voltage batteries operating within a 40–60V voltage range, including lithium-ion and lead-acid batteries.
The maximum charging and discharging current of 135A enables efficient management of high charging and discharging power, within the operating limits supported by the battery and its Battery Management System (BMS).
Communication with compatible BMS systems enables monitoring and control of battery charging and discharging processes.
Backup Power and System Expansion
The inverter can supply power to loads connected to its backup output when the electrical grid is unavailable, within the technical limits and configuration of the system.
In off-grid operation, the inverter supports a peak output power of twice its rated power for 10 seconds.
It also supports parallel operation of up to 16 compatible inverters, providing flexibility for future photovoltaic system expansion.
The AC coupling function enables integration into certain existing photovoltaic systems, while generator support allows energy management from additional power sources.
Monitoring and Control
The inverter features a color LCD touchscreen, allowing users to monitor operating parameters and configure system settings.
Wi-Fi, RS485 and CAN communication interfaces facilitate system monitoring and communication with compatible equipment.
The enclosure features an IP65 protection rating, providing resistance to dust and water under the installation conditions specified by the manufacturer.
Key Features and Benefits
Rated output power: 6,000 W
Single-phase operation, 220/230V
Compatible with low-voltage 48V batteries
Maximum battery charging/discharging current: 135A
Two independent MPPT trackers, 18A + 18A
Maximum PV input power: 9,600 W
Maximum PV access power: 12,000 W
Maximum efficiency: 97.6%
Backup power supply for compatible loads
Parallel operation of up to 16 compatible inverters
6 programmable battery management time periods
Generator compatibility
Color LCD touchscreen
Wi-Fi, RS485 and CAN communication
IP65 protection rating
The DEYE SUN-6K-SG06LP1-EU-BM2 is suitable for households looking to increase photovoltaic energy self-consumption, integrate battery storage and reduce dependence on electricity supplied by the grid.
General Information
Manufacturer
DEYE
Model
SUN-6K-SG06LP1-EU-BM2
Inverter Type
Hybrid
Number of Phases
Single-Phase
Rated Power
6,000 W
Rated AC Voltage
220 / 230 V
Battery Parameters
Battery Type
Lithium-ion / Lead-acid
Battery Voltage Range
40–60 V
Maximum Charging Current
135 A
Maximum Discharging Current
135 A
Number of Battery Inputs
1
Li-ion Battery Management
Automatic BMS Adaptation
PV Input Parameters (DC)
Maximum PV Access Power
12,000 W
Maximum PV Input Power
9,600 W
Maximum PV Voltage
500 V
Start-up Voltage
125 V
Rated PV Voltage
370 V
MPPT Voltage Range
150–425 V
Number of MPPT Trackers
2
Number of Strings per MPPT
1 + 1
Maximum PV Input Current
18 + 18 A
Maximum PV Short-Circuit Current
27 + 27 A
AC Input / Output Parameters
Rated Active Power
6,000 W
Maximum Apparent Power
6,600 VA
Rated Voltage
220 / 230 V
Rated Frequency
50 / 60 Hz
Grid Connection
L + N + PE
Rated Input / Output Current
27.3 / 26.1 A
Maximum Input / Output Current
30 / 28.7 A
Maximum AC Pass-Through Current
50 A
Off-Grid Peak Power
2 × rated power for 10 seconds
Adjustable Power Factor
0.8 capacitive – 0.8 inductive
Total Harmonic Current Distortion (THDi)
< 3%
DC Injection Current
< 0.5% In
Efficiency
Maximum Efficiency
97.6%
European Efficiency
96.5%
MPPT Efficiency
> 99%
Features and Functions
Parallel Operation
Up to 16 compatible units
Programmable Battery Time Periods
6
AC Coupling
Yes
Generator Support
Yes
Backup Power Supply
Yes
Communication and Protection
Display
Color LCD Touchscreen
Communication Interfaces
Wi-Fi, RS485, CAN
Protection Rating
IP65
Cooling System
Natural Cooling
Operating Temperature
-40°C to +60°C (power derating above +45°C)
Dimensions (W × H × D)
310 × 460 × 218 mm, excluding connectors and brackets
Weight
15.6 kg
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download Technical DatasheetDownload User ManualDownload Certificate of Conformity
The DEYE SUN-3.6K-SG06LP1-EU-BM2 hybrid inverter is a modern solution for efficient energy management in residential photovoltaic systems. With a rated output power of 3.6 kW, single-phase operation and compatibility with low-voltage 48V batteries, it enables the use of solar energy, storage of surplus electricity and power supply to household appliances according to energy demand.
Equipped with two independent MPPT trackers, the inverter optimizes photovoltaic energy production even when solar panels are installed on surfaces with different orientations. It supports a maximum PV input power of 5,760 W, with a maximum PV access power of 7,200 W, according to the manufacturer's specifications.
Intelligent Energy Management
The inverter can operate in grid-connected systems or configurations with backup power, managing energy from solar panels, batteries and the electrical grid.
With 6 programmable battery charging and discharging time periods, users can adjust battery operation according to household energy consumption and electricity tariffs.
48V Battery Compatibility
The model is compatible with low-voltage batteries operating within a 40–60V range, including lithium-ion and lead-acid batteries.
The maximum charging and discharging current of 90A enables efficient management of stored energy. Communication with compatible Battery Management Systems (BMS) supports battery monitoring and control.
Backup Power and Flexibility
The inverter can supply power to loads connected to its backup output when the electrical grid is unavailable, subject to the system configuration and technical operating limits.
It supports parallel operation of up to 16 compatible inverters, allowing the system to be expanded according to future energy requirements.
The AC coupling function enables integration into certain existing photovoltaic installations, while generator compatibility provides additional flexibility for energy management.
Control and Monitoring
The color LCD touchscreen allows users to view key operating parameters and configure inverter functions.
Wi-Fi, RS485 and CAN communication interfaces facilitate monitoring and communication with compatible equipment.
The IP65-rated enclosure provides protection against dust and water, allowing installation under the conditions specified by the manufacturer.
Key Features and Benefits
Rated output power: 3,600 W
Single-phase operation, 220/230V
Compatible with low-voltage 48V batteries
Maximum battery charging/discharging current: 90A
Two independent MPPT trackers, 18A + 18A
Maximum PV input power: 5,760 W
Maximum efficiency: 97.6%
Backup power supply for compatible loads
Parallel operation of up to 16 inverters in compatible configurations
6 programmable time periods for battery management
Color LCD touchscreen
Wi-Fi, RS485 and CAN communication
IP65 protection rating
The DEYE SUN-3.6K-SG06LP1-EU-BM2 is suitable for households looking to increase solar energy self-consumption, integrate battery storage and reduce dependence on electricity supplied by the grid.
General Information
Manufacturer
DEYE
Model
SUN-3.6K-SG06LP1-EU-BM2
Inverter Type
Hybrid
Number of Phases
Single-Phase
Rated Power
3,600 W
Rated AC Voltage
220 / 230 V
Battery Parameters
Battery Type
Lithium-ion / Lead-acid
Battery Voltage Range
40–60 V
Maximum Charging Current
90 A
Maximum Discharging Current
90 A
Number of Battery Inputs
1
Battery Communication
CAN / RS485
PV Input Parameters (DC)
Maximum PV Access Power
7,200 W
Maximum PV Input Power
5,760 W
Maximum PV Voltage
500 V
Start-up Voltage
125 V
Rated PV Voltage
370 V
MPPT Voltage Range
150–425 V
Number of MPPT Trackers
2
Number of Strings per MPPT
1 + 1
Maximum PV Input Current
18 + 18 A
Maximum PV Short-Circuit Current
27 + 27 A
AC Input / Output Parameters
Rated Active Power
3,600 W
Maximum Apparent Power
3,960 VA
Rated Voltage
220 / 230 V
Rated Frequency
50 / 60 Hz
Grid Connection
L + N + PE
Rated Input / Output Current
16.4 / 15.7 A
Maximum Input / Output Current
18 / 17.3 A
Maximum AC Pass-Through Current
50 A
Off-Grid Peak Power
2 × rated power for 10 seconds
Total Harmonic Current Distortion (THDi)
< 3%
Efficiency
Maximum Efficiency
97.6%
MPPT Efficiency
> 99%
Features and Functions
Parallel Operation
Up to 16 compatible units
Programmable Battery Time Periods
6
AC Coupling
Yes
Generator Support
Yes
Backup Power Supply
Yes
Communication and Protection
Display
Color LCD Touchscreen
Communication Interfaces
Wi-Fi, RS485, CAN
Protection Rating
IP65
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download the datasheetDownload the manualDownload the Declaration of Conformity
The DEYE SUN-18K-SG05LP3-EU-SM2 is an 18kW three-phase hybrid inverter designed for photovoltaic installations using 40–60V low-voltage batteries. Its two battery inputs and maximum charging/discharging current of 330A make it suitable for storage systems sized for high residential or commercial energy consumption.
The inverter combines the management of photovoltaic panels, batteries, the grid, and electrical loads in a single unit. It can be added to an existing installation through AC coupling and supports the storage of energy supplied by a diesel generator. Six programmable time periods provide control over when the battery is charged and discharged.
The model supports up to 28.8kW of maximum PV input power and features two MPPT trackers, each supporting two strings. The three-phase output can operate with 100% unbalanced loads, with up to 50% of the rated power available on each phase. In off-grid mode, the unit can deliver twice its rated output for 10 seconds.
Main features
18kW three-phase hybrid inverter
Compatible with 40–60V lead-acid or lithium-ion batteries
Two battery inputs
Maximum charging and discharging current of 330A
Two MPPT trackers with a 2+2 string configuration
Six programmable charging/discharging periods
AC coupling for upgrading existing photovoltaic systems
Up to 10 units connected in parallel for on-grid and off-grid operation
Supports multiple batteries connected in parallel
Supports energy storage from a diesel generator
100% unbalanced output
Wi-Fi, RS485, and CAN communication
IP65 protection rating
Advantages
Power for demanding applications: The 18kW capacity is suitable for three-phase projects with significant loads, provided that the installation is correctly sized.
Management of a high-capacity storage system: The maximum current of 330A supports the charging and discharging of properly sized compatible batteries.
Flexible photovoltaic array: The maximum PV input power of 28.8kW and two MPPT trackers enable the efficient use of panel arrays with different orientations.
Fewer limitations between phases: The 100% unbalanced output is useful in applications where loads are not distributed equally across the phases.
Integration with multiple energy sources: The system can coordinate energy from photovoltaic panels, the grid, batteries, and a generator.
Scalability: Up to 10 inverters can be connected in parallel, allowing a properly designed installation to be expanded.
Recommended applications
Large homes and properties with numerous three-phase loads
Guesthouses, villas, and multifunctional buildings
Commercial premises and offices
Workshops and small commercial applications
Photovoltaic systems with high-capacity energy storage
Upgrading an existing installation through AC coupling
Systems using a generator as an additional power source
Technical specifications
Specification
Value
Model
SUN-18K-SG05LP3-EU-SM2
Type
Three-phase hybrid inverter
Battery type
Lead-acid or lithium-ion
Battery voltage range
40–60V
Number of battery inputs
2
Maximum charging/discharging current
330A
Lithium-ion charging strategy
Automatic adaptation to the BMS
Maximum PV access power
36,000W
Maximum PV input power
28,800W
Maximum PV input voltage
800V
Start-up voltage
160V
MPPT voltage range
160–650V
Rated PV input voltage
550V
Maximum PV operating input current
36+36A
Maximum PV short-circuit current
54+54A
MPPT trackers / strings per MPPT
2 / 2+2
Rated AC active power
18,000W
Maximum AC apparent power
19,800VA
Rated AC input/output current
27.3/26.1A
Maximum AC input/output current
30/28.7A
Maximum continuous AC bypass current
70A
Off-grid peak power
2 × rated power for 10 seconds
Rated input/output voltage
220/380V, 230/400V; 0.85Un–1.1Un; 3L+N+PE
Grid frequency/range
50Hz / 45–55Hz; 60Hz / 55–65Hz
Power factor adjustment range
0.8 leading to 0.8 lagging
THDi
<3% of rated power
DC injection current
<0.5% In
Maximum efficiency
97.6%
European efficiency
97.0%
MPPT efficiency
>99%
Display
LCD
Communication
Wi-Fi, RS485, CAN
Operating temperature
-40°C to +60°C; power derating above 45°C
Permissible humidity
0–100%
Permissible altitude
3,000m
Noise level
<60dB
Protection rating
IP65
Topology
Non-isolated on the solar side; isolated on the battery side
Overvoltage category
OVC II (DC), OVC III (AC)
Enclosure dimensions (W × H × D)
456 × 750 × 268.5mm, excluding connectors and mounting brackets
Weight
51.9kg
Cooling
Intelligent air cooling
Surge protection
Type II (DC), Type II (AC)
Compatibility and integration
The inverter supports lead-acid and lithium-ion batteries within the 40–60V range. For lithium-ion batteries, the charging strategy adapts to the BMS through compatible communication. Exact compatibility depends on the battery model, BMS protocol, and firmware version. We recommend checking compatibility before purchase.
The photovoltaic strings must be sized according to the voltage and current limits of each MPPT, including variations in module voltage caused by temperature changes.
Protection and safety
The inverter includes DC reverse-polarity protection, AC output overcurrent protection, thermal protection, AC overvoltage protection, AC output short-circuit protection, DC component monitoring, AFCI, anti-islanding protection, a DC switch, insulation impedance detection, and residual current monitoring. Surge protection is Type II on the DC side and Type II on the AC side.
Standards declared by the manufacturer
Grid regulations: IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105
Safety and EMC: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
System sizing, installation, and commissioning must be carried out by qualified personnel in accordance with DEYE documentation and applicable regulations.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download the datasheetDownload the manualDownload the Declaration of Conformity
The DEYE SUN-16K-SG05LP3-EU-SM2 is a 16kW three-phase hybrid inverter designed for photovoltaic installations with low-voltage batteries. Its two 40–60V battery inputs and maximum charging/discharging current of 300A provide flexibility for energy storage systems intended for large homes, guesthouses, offices, workshops, and commercial premises.
The unit manages photovoltaic production, battery storage, the grid, and electrical loads. The AC coupling function allows integration into an existing photovoltaic installation, while diesel generator support provides an additional power supply and energy storage option. Six programmable charging and discharging periods allow operation to be adapted to the user’s consumption profile and energy management strategy.
With a maximum PV input power of 25.6kW, two MPPT trackers, and four strings in a 2+2 configuration, the model can manage two separate photovoltaic orientations or installation areas. The 100% unbalanced three-phase output allows each phase to supply up to 50% of the inverter’s rated power. In off-grid operation, the inverter can support a peak output of twice its rated power for 10 seconds.
Main features
16kW three-phase hybrid inverter
Compatible with 40–60V lead-acid or lithium-ion batteries
Two battery inputs
Maximum charging and discharging current of 300A
Two MPPT trackers with a 2+2 string configuration
Six programmable battery charging/discharging periods
AC coupling for integration into existing photovoltaic systems
Up to 10 inverters connected in parallel for on-grid and off-grid operation
Supports batteries connected in parallel
Supports energy storage from a diesel generator
100% unbalanced output
Wi-Fi, RS485, and CAN communication
IP65 protection rating
Advantages
Suitable power for higher energy demand: The 16kW output can support large three-phase residential and commercial applications, within the limits of the system design.
Fast charging and discharging: A current of up to 300A enables efficient use of a properly sized battery system.
Efficient use of solar production: A PV input capacity of up to 25.6kW allows flexible DC sizing, provided that all electrical limits are observed.
Improved management of unevenly distributed loads: The unbalanced output function is better suited to situations where loads differ from one phase to another.
Programmable control: Six charging and discharging periods help optimise energy use.
Expandable system: Up to 10 units can operate in parallel, allowing the installation to be expanded at a later stage.
Recommended applications
Large homes with a three-phase power supply
Guesthouses, villas, and residential buildings
Offices and commercial premises
Workshops and small production facilities
New installations with energy storage or upgrades to existing systems through AC coupling
Systems with a generator backup power source
Technical specifications
Specification
Value
Model
SUN-16K-SG05LP3-EU-SM2
Type
Three-phase hybrid inverter
Battery type
Lead-acid or lithium-ion
Battery voltage range
40–60V
Number of battery inputs
2
Maximum charging/discharging current
300A
Lithium-ion charging strategy
Automatic adaptation to the BMS
Maximum PV access power
32,000W
Maximum PV input power
25,600W
Maximum PV input voltage
800V
Start-up voltage
160V
MPPT voltage range
160–650V
Rated PV input voltage
550V
Maximum PV operating input current
36+36A
Maximum PV short-circuit current
54+54A
MPPT trackers / strings per MPPT
2 / 2+2
Rated AC active power
16,000W
Maximum AC apparent power
17,600VA
Rated AC input/output current
24.3/23.2A
Maximum AC input/output current
26.7/25.6A
Maximum continuous AC bypass current
70A
Off-grid peak power
2 × rated power for 10 seconds
Rated input/output voltage
220/380V, 230/400V; 0.85Un–1.1Un; 3L+N+PE
Grid frequency/range
50Hz / 45–55Hz; 60Hz / 55–65Hz
Power factor adjustment range
0.8 leading to 0.8 lagging
THDi
<3% of rated power
DC injection current
<0.5% In
Maximum efficiency
97.6%
European efficiency
97.0%
MPPT efficiency
>99%
Display
LCD
Communication
Wi-Fi, RS485, CAN
Operating temperature
-40°C to +60°C; power derating above 45°C
Permissible humidity
0–100%
Permissible altitude
3,000m
Noise level
<60dB
Protection rating
IP65
Topology
Non-isolated on the solar side; isolated on the battery side
Overvoltage category
OVC II (DC), OVC III (AC)
Enclosure dimensions (W × H × D)
456 × 750 × 268.5mm, excluding connectors and mounting brackets
Weight
51.9kg
Cooling
Intelligent air cooling
Surge protection
Type II (DC), Type II (AC)
Compatibility and integration
The inverter supports lead-acid and lithium-ion batteries within the 40–60V range. For lithium-ion batteries, the charging strategy adapts to the BMS through compatible communication. Exact compatibility depends on the battery model, BMS protocol, and firmware version. We recommend checking compatibility before purchase.
The string configuration must be calculated to comply with the maximum voltage of 800V, the MPPT range of 160–650V, the current limits of each tracker, and the behaviour of the modules under the extreme temperatures expected at the installation site.
Protection and safety
The inverter includes DC reverse-polarity protection, AC output overcurrent protection, thermal protection, AC overvoltage protection, AC output short-circuit protection, DC component monitoring, AFCI, anti-islanding protection, a DC switch, insulation impedance detection, and residual current monitoring. Surge protection is Type II on the DC side and Type II on the AC side.
Standards declared by the manufacturer
Grid regulations: IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105
Safety and EMC: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
System sizing, installation, and commissioning must be carried out by qualified personnel in accordance with DEYE documentation and applicable regulations.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download the datasheetDownload the manualDownload the Declaration of Conformity
The DEYE SUN-14K-SG05LP3-EU-SM2 is a 14kW three-phase hybrid inverter designed for photovoltaic systems with low-voltage battery storage. Its 40–60V battery architecture and two dedicated battery inputs allow for a flexible system configuration, suitable for homes with high energy consumption, guesthouses, offices, workshops, and small commercial premises.
The inverter manages the energy generated by the solar panels, battery, grid, and loads within a single unit. It can be integrated through AC coupling into an existing photovoltaic system and supports the storage of energy supplied by a diesel generator. Six programmable time periods for battery charging and discharging help adapt the system to the consumption profile and energy tariffs.
The model supports up to 22.4kW of maximum PV input power and uses two MPPT trackers, each supporting two strings. In three-phase operation, the output can be 100% unbalanced, with each phase supplying up to 50% of the inverter’s rated power. For loads with high starting currents, the off-grid output can temporarily reach twice the rated power for 10 seconds.
Main features
14kW three-phase hybrid inverter
Compatible with 40–60V lead-acid or lithium-ion batteries
Two battery inputs
Maximum charging and discharging current of 260A
Two MPPT trackers with a 2+2 string configuration
Six programmable battery charging/discharging time periods
AC coupling function for upgrading an existing photovoltaic system
Supports the parallel connection of up to 10 inverters for on-grid and off-grid operation
Supports multiple batteries connected in parallel
Supports energy storage from a diesel generator
100% unbalanced three-phase output
Wi-Fi, RS485, and CAN communication
IP65 protection rating
Advantages
Greater storage flexibility: The low-voltage battery system and two battery inputs make it easier to configure a storage capacity suited to the project.
Improved use of solar energy: The oversized PV input capacity compared with the AC output extends the daily production window, provided that the technical string limits are observed.
Reliable power delivery under real operating conditions: The unbalanced output function provides improved management of loads distributed unevenly across the three phases.
Integration into an existing system: AC coupling allows storage and hybrid functions to be added to an existing photovoltaic installation.
Control adapted to the consumption schedule: Six time periods allow battery charging and discharging to be programmed.
Future expansion: Up to 10 units can operate in parallel, provided that the system is designed and configured in accordance with the manufacturer’s documentation.
Recommended applications
Three-phase homes with high energy consumption
Guesthouses and large residential buildings
Offices, practices, and commercial premises
Workshops and small commercial applications
New photovoltaic systems or upgrades to existing systems through AC coupling
Systems with battery storage and an additional generator power source
Technical specifications
Specification
Value
Model
SUN-14K-SG05LP3-EU-SM2
Type
Three-phase hybrid inverter
Battery type
Lead-acid or lithium-ion
Battery voltage range
40–60V
Number of battery inputs
2
Maximum charging/discharging current
260A
Lithium-ion charging strategy
Automatic adaptation to the BMS
Maximum PV access power
28,000W
Maximum PV input power
22,400W
Maximum PV input voltage
800V
Start-up voltage
160V
MPPT voltage range
160–650V
Rated PV input voltage
550V
Maximum PV operating input current
36+36A
Maximum PV short-circuit current
54+54A
MPPT trackers / strings per MPPT
2 / 2+2
Rated AC active power
14,000W
Maximum AC apparent power
15,400VA
Rated AC input/output current
21.3/20.3A
Maximum AC input/output current
23.4/22.4A
Maximum continuous AC bypass current
70A
Off-grid peak power
2 × rated power for 10 seconds
Rated input/output voltage
220/380V, 230/400V; 0.85Un–1.1Un; 3L+N+PE
Grid frequency/range
50Hz / 45–55Hz; 60Hz / 55–65Hz
Power factor adjustment range
0.8 leading to 0.8 lagging
THDi
<3% of rated power
DC injection current
<0.5% In
Maximum efficiency
97.6%
European efficiency
97.0%
MPPT efficiency
>99%
Display
LCD
Communication
Wi-Fi, RS485, CAN
Operating temperature
-40°C to +60°C; power derating above 45°C
Permissible humidity
0–100%
Permissible altitude
3,000m
Noise level
<60dB
Protection rating
IP65
Topology
Non-isolated on the solar side; isolated on the battery side
Overvoltage category
OVC II (DC), OVC III (AC)
Enclosure dimensions (W × H × D)
456 × 750 × 268.5mm, excluding connectors and mounting brackets
Weight
51.9kg
Cooling
Intelligent air cooling
Surge protection
Type II (DC), Type II (AC)
Compatibility and integration
The inverter supports lead-acid and lithium-ion batteries within the 40–60V range. For lithium-ion batteries, the charging strategy adapts to the BMS through compatible communication. Exact compatibility depends on the battery model, BMS protocol, and firmware version. We recommend checking compatibility before purchase.
The photovoltaic strings must be designed so that the voltage, current, and power remain within the limits of each MPPT, including under the minimum and maximum temperature conditions at the installation site.
Protection and safety
The inverter includes DC reverse-polarity protection, AC output overcurrent protection, thermal protection, AC overvoltage protection, AC output short-circuit protection, DC component monitoring, AFCI, anti-islanding protection, a DC switch, insulation impedance detection, and residual current monitoring. Surge protection is Type II on the DC side and Type II on the AC side.
Standards declared by the manufacturer
Grid regulations: IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105
Safety and EMC: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
System sizing, installation, and commissioning must be carried out by qualified personnel in accordance with DEYE documentation and applicable regulations.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download datasheetDownload user manualDownload declaration of conformity
SUN-125K-SG02HP3-EU-GM10 is a 125kW three-phase hybrid inverter designed for commercial and industrial photovoltaic systems that require intelligent energy generation, storage and management.
The inverter can be integrated into production facilities, warehouses, farms, commercial buildings, logistics centres and other installations with high energy consumption.
High power for commercial and industrial applications
The inverter delivers a rated AC active power of 125kW and supports a maximum PV input power of 200kW. Its maximum AC input/output apparent power is 135kVA.
In off-grid mode, the inverter can deliver a peak power equal to 1.5 times its rated power for 10 seconds. This capacity helps supply equipment with high start-up currents.
10 MPPT trackers
The model is equipped with 10 MPPT trackers and two string inputs for each MPPT.
This configuration allows multiple groups of solar panels to be connected and provides greater flexibility for installations with different panel orientations, tilt angles or lighting conditions. The MPPT operating range is 150–850VDC, while the maximum permitted PV input voltage is 1000VDC.
High-voltage batteries
The inverter is compatible with high-voltage lithium-ion batteries operating within a voltage range of 160–1000VDC.
The two independent battery inputs allow a total maximum charging and discharging current of 200A. The charging strategy automatically adapts based on communication with the battery management system.
Using a high-voltage architecture helps reduce system currents and achieve high efficiency in high-power installations.
On-grid and off-grid operation
The SUN-125K-SG02HP3-EU-GM10 can operate both connected to the utility grid and in off-grid applications.
The AC coupling function allows the inverter to be integrated into an existing photovoltaic installation and upgraded with an energy storage system.
The inverter provides six programmable time periods for battery charging and discharging. Energy can be managed according to consumption, photovoltaic production, grid availability and electricity tariff periods.
The equipment also supports storing energy supplied by a diesel generator.
Modular system expansion
For projects requiring higher power, up to 10 inverters can be connected in parallel for both on-grid and off-grid operation.
The system also supports multiple batteries connected in parallel. This configuration enables modular installations that can be expanded as energy consumption increases.
High efficiency
The inverter achieves:
maximum efficiency of 98.7%;
European efficiency of 98.1%;
MPPT efficiency above 99%.
The intelligent air-cooling system adjusts its operation according to the inverter temperature and load.
Monitoring and communication
Operating information is displayed through the LCD screen and LED indicators.
The inverter features RS485, RS232 and CAN communication interfaces. Depending on the accessories used, monitoring can be performed via Wi-Fi, Bluetooth, GPRS, 4G or LAN.
Integrated protection features
The inverter includes:
DC reverse-polarity protection;
AC output overcurrent protection;
thermal protection;
AC output overvoltage protection;
AC output short-circuit protection;
DC component monitoring;
anti-islanding protection;
DC switch;
insulation impedance detection;
residual current detection;
Type II surge protection on both the DC and AC sides;
optional AFCI protection.
The IP65-rated enclosure protects the equipment against dust and water jets. The operating temperature range is −40°C to +60°C, with power derating above 45°C.
Recommended applications
production facilities;
factories;
warehouses and logistics centres;
farms and agricultural facilities;
commercial buildings;
hotels;
data centres;
electric vehicle charging stations;
microgrids;
commercial energy storage systems;
installations using generators.
⚠️ System sizing, installation and commissioning must be carried out by authorised personnel.
⚠️ Battery compatibility must be checked before purchase according to the battery model, BMS and firmware version.
Technical specifications
Specification
Value
Brand
DEYE
Model
SUN-125K-SG02HP3-EU-GM10
Inverter type
Hybrid
Number of phases
Three-phase
Rated AC input/output active power
125,000W
Maximum AC input/output apparent power
135,000VA
Rated AC input/output current
189.4A / 181.2A
Maximum AC input/output current
204.6A / 195.7A
Maximum continuous AC bypass current
250A
Off-grid peak power
150% of rated power for 10 seconds
Rated AC input/output voltage
220/380V, 230/400V
AC connection
3L + N + PE
Frequency
50/60Hz
Power factor adjustment range
0.8 leading to 0.8 lagging
THDi
Below 3%
Maximum PV input power
200,000W
Maximum PV access power
250,000W
Maximum PV input voltage
1000VDC
Start-up voltage
180VDC
MPPT voltage range
150–850VDC
Rated PV input voltage
650VDC
Number of MPPT trackers
10
Strings per MPPT
2
Maximum operating current per MPPT
42A
Maximum short-circuit current per MPPT
63A
Battery type
High-voltage lithium-ion
Battery voltage range
160–1000VDC
Number of battery inputs
2
Maximum charging current
100A + 100A
Maximum discharging current
100A + 100A
BMS communication
CAN / RS485
Maximum efficiency
98.7%
European efficiency
98.1%
MPPT efficiency
Above 99%
Display
LCD + LED
Communication interfaces
RS485 / RS232 / CAN
Optional monitoring
Wi-Fi / Bluetooth / GPRS / 4G / LAN
Ingress protection rating
IP65
Cooling
Intelligent air cooling
Operating temperature
−40°C to +60°C
Permissible ambient humidity
0–100%
Maximum operating altitude
3000m
Noise level
≤65dB
Topology
Transformerless
Dimensions
734 × 1091 × 344mm
Weight
161.7kg
Warranty
10 years, subject to the manufacturer’s warranty conditions
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download datasheetDownload user manualDownload declaration of conformity
SUN-100K-SG02HP3-EU-GM10 is a 100kW three-phase hybrid inverter designed for commercial and industrial photovoltaic systems that require intelligent energy generation, storage and management.
The inverter can be integrated into production facilities, warehouses, farms, commercial buildings, logistics centres and other installations with high energy consumption.
High power for commercial and industrial applications
The inverter delivers a rated AC active power of 100kW and supports a maximum PV input power of 160kW. Its maximum AC input/output apparent power is 110kVA.
In off-grid mode, the inverter can deliver a peak power equal to 1.5 times its rated power for 10 seconds. This capacity helps supply equipment with high start-up currents.
10 MPPT trackers
The model is equipped with 10 MPPT trackers and two string inputs for each MPPT.
This configuration allows multiple groups of solar panels to be connected and provides greater flexibility for installations with different panel orientations, tilt angles or lighting conditions. The MPPT operating range is 150–850VDC, while the maximum permitted PV input voltage is 1000VDC.
High-voltage batteries
The inverter is compatible with high-voltage lithium-ion batteries operating within a voltage range of 160–1000VDC.
The two independent battery inputs allow a total maximum charging and discharging current of 200A. The charging strategy automatically adapts based on communication with the battery management system.
Using a high-voltage architecture helps reduce system currents and achieve high efficiency in high-power installations.
On-grid and off-grid operation
The SUN-100K-SG02HP3-EU-GM10 can operate both connected to the utility grid and in off-grid applications.
The AC coupling function allows the inverter to be integrated into an existing photovoltaic installation and upgraded with an energy storage system.
The inverter provides six programmable time periods for battery charging and discharging. Energy can be managed according to consumption, photovoltaic production, grid availability and electricity tariff periods.
The equipment also supports storing energy supplied by a diesel generator.
Modular system expansion
For projects requiring higher power, up to 10 inverters can be connected in parallel for both on-grid and off-grid operation.
The system also supports multiple batteries connected in parallel. This configuration enables modular installations that can be expanded as energy consumption increases.
High efficiency
The inverter achieves:
maximum efficiency of 98.7%;
European efficiency of 98.1%;
MPPT efficiency above 99%.
The intelligent air-cooling system adjusts its operation according to the inverter temperature and load.
Monitoring and communication
Operating information is displayed through the LCD screen and LED indicators.
The inverter features RS485, RS232 and CAN communication interfaces. Depending on the accessories used, monitoring can be performed via Wi-Fi, Bluetooth, GPRS, 4G or LAN.
Integrated protection features
The inverter includes:
DC reverse-polarity protection;
AC output overcurrent protection;
thermal protection;
AC output overvoltage protection;
AC output short-circuit protection;
DC component monitoring;
anti-islanding protection;
DC switch;
insulation impedance detection;
residual current detection;
Type II surge protection on both the DC and AC sides;
optional AFCI protection.
The IP65-rated enclosure protects the equipment against dust and water jets. The operating temperature range is −40°C to +60°C, with power derating above 45°C.
Recommended applications
production facilities;
factories;
warehouses and logistics centres;
farms and agricultural facilities;
commercial buildings;
hotels;
data centres;
electric vehicle charging stations;
microgrids;
commercial energy storage systems;
installations using generators.
⚠️ System sizing, installation and commissioning must be carried out by authorised personnel.
⚠️ Battery compatibility must be checked before purchase according to the battery model, BMS and firmware version.
Technical specifications
Specification
Value
Brand
DEYE
Model
SUN-100K-SG02HP3-EU-GM10
Inverter type
Hybrid
Number of phases
Three-phase
Rated AC input/output active power
100,000W
Maximum AC input/output apparent power
110,000VA
Rated AC input/output current
151.6A / 145A
Maximum AC input/output current
166.7A / 159.5A
Maximum continuous AC bypass current
250A
Off-grid peak power
150% of rated power for 10 seconds
Rated AC input/output voltage
220/380V, 230/400V
AC connection
3L + N + PE
Frequency
50/60Hz
Power factor adjustment range
0.8 leading to 0.8 lagging
THDi
Below 3%
Maximum PV input power
160,000W
Maximum PV access power
200,000W
Maximum PV input voltage
1000VDC
Start-up voltage
180VDC
MPPT voltage range
150–850VDC
Rated PV input voltage
650VDC
Number of MPPT trackers
10
Strings per MPPT
2
Maximum operating current per MPPT
42A
Maximum short-circuit current per MPPT
63A
Battery type
High-voltage lithium-ion
Battery voltage range
160–1000VDC
Number of battery inputs
2
Maximum charging current
100A + 100A
Maximum discharging current
100A + 100A
BMS communication
CAN / RS485
Maximum efficiency
98.7%
European efficiency
98.1%
MPPT efficiency
Above 99%
Display
LCD + LED
Communication interfaces
RS485 / RS232 / CAN
Optional monitoring
Wi-Fi / Bluetooth / GPRS / 4G / LAN
Ingress protection rating
IP65
Cooling
Intelligent air cooling
Operating temperature
−40°C to +60°C
Permissible ambient humidity
0–100%
Maximum operating altitude
3000m
Noise level
≤65dB
Topology
Transformerless
Dimensions
734 × 1091 × 344mm
Weight
161.7kg
Warranty
10 years, subject to the manufacturer’s warranty conditions
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The V-TAC 10kW High Voltage photovoltaic inverter (SUN-10K-SG01HP3-EU-AM2) is a high-performance solution for three-phase hybrid photovoltaic systems, designed for residential and commercial applications requiring high efficiency and operational flexibility.
This inverter allows the simultaneous use of energy from panels, batteries and the grid, being compatible with both on-grid and off-grid systems, ensuring continuity of supply even in the event of power cuts.
With a rated power of 10kW and support for high-voltage (HV) systems, it offers superior efficiency and reduced losses compared to low-voltage solutions. It can also handle up to 13kW of input from photovoltaic panels, making it ideal for optimised systems.
✔ Hybrid operation (grid + battery + panels)✔ Compatible with high-voltage batteries✔ Ideal for prosumers and commercial applications✔ High efficiency (~97%)
Advantages & benefits
✔ Energy independence (operates even without the grid)✔ High efficiency and low losses✔ Ideal for high-voltage systems (more efficient)✔ Instant backup in the event of a power cut✔ Compatible with large storage systems (HV)
General information
Brand
V-TAC / Deye
Model
SUN-10K-SG01HP3-EU-AM2
Type
Three-phase hybrid inverter
Electrical data
Rated power
10 kW
Maximum PV power
13 kW
Peak power (off-grid)
150% for 10 seconds
Voltage
Maximum PV voltage
1000V
MPPT range
150 – 850V
Nominal PV voltage
600V
Start voltage
180V
Capabilities
Operation
On-grid / Off-grid / Backup
Number of MPPT
2
Protection rating
IP65
Operating temperature
-40°C to +60°C
Physical details
Dimensions
408 x 638 x 237 mm
Weight
30.5 kg
Other
Product code
SUN-10K-SG01HP3-EU-AM2
Warranty
10 years
✅ Feed-in to the national grid (EN 50549-1)
✅ Rated power: 10 kW
✅ Type: three-phase hybrid
✅ Maximum PV voltage: 1000V
✅MPPT range: 150 – 850V
✅ Operation: on-grid / off-grid / backup
✅Protection rating: IP65
✅Operating temperature: -40°C to +60°C
✅Operates with or without high-voltage batteries
✅10-year warranty
Download technical data sheet
Download user manual EN
Download certificate of conformity
The inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by a diesel generator to ensure an uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE SUN-12K-SG05LP3-EU-SM2 Hybrid Inverter is a powerful three-phase solution designed for residential and small commercial photovoltaic systems. With a rated power output of 12 kW, hybrid functionality, and advanced energy management capabilities, this inverter enables the efficient integration of solar power, battery storage, and a stable energy supply for connected loads. It is the ideal choice for users looking to maximize self-consumption, increase energy independence, and reduce reliance on the utility grid.
Model
SUN-3K-SG05LP3-EU-SM2
SUN-4K-SG05LP3-EU-SM2
SUN-5K-SG05LP3-EU-SM2
SUN-6K-SG05LP3-EU-SM2
SUN-8K-SG05LP3-EU-SM2
SUN-10K-SG05LP3-EU-SM2
SUN-12K-SG05LP3-EU-SM2
Battery Input Data
Battery Type
Lead-acid or Lithium-ion
Battery Voltage Range (V)
40–60
Max. Charging Current (A)
70
95
120
135
190
210
240
Max. Discharge Current (A)
70
95
120
135
190
210
240
Charging Strategy for Li-ion Battery
Self-adaptation to BMS
Number of Battery Inputs
1
PV String Input Data
Max. PV Input Power (W)
6000
8000
10,000
12,000
16,000
20,000
24,000
Max. PV Input Power (W)
4500
6400
8000
9600
12800
16,000
19200
Max. PV Input Voltage (V)
800
Start-up Voltage (V)
160
MPPT Voltage Range (V)
200–650
Rated PV Input Voltage (V)
550
Max. Operating PV Input Current (A)
20+20
20+20
20+20
20+20
26+26
26+26
26+26
Max. Input Short-Circuit Current (A)
30+30
30+30
30+30
30+30
39+39
39+39
39+39
No. of MPP Trackers / No. of Strings MPP Tracker
2 / 1+1
2 / 1+1
2 / 1+1
2 / 1+1
2 / 2+2
2 / 2+2
2 / 2+2
AC Input/Output Data
Rated AC Input/Output Active Power (W)
3000
4000
5000
6000
8000
10,000
12,000
Max. AC Input/Output Apparent Power (VA)
3300
4400
5500
6600
8800
11,000
13200
Rated AC Input/Output Current (A)
4.6/4.4
6.1/5.8
7.6/7.3
9.1/8.7
12.2/11.6
15.2/14.5
18.2/17.4
Max. AC Input/Output Current (A)
5/4.8
6.7/6.4
8.4/8
10/9.6
13.4/12.8
16.7/16
20/19.2
Max. Continuous AC Passthrough (grid to load) (A)
45
Peak Power (off-grid) (W)
2 times rated power, 10s
Power Factor Adjustment Range
0.8 leading to 0.8 lagging
Rated Input/Output Voltage/Range (V)
220/380V, 230/400V, 0.85Un–1.1Un
Rated Input/Output Grid Frequency/Range (Hz)
50/45–55, 60/55–65
Grid Connection Type
3L+N+PE
Total Current Harmonic Distortion THDi
<3% (of rated power)
DC Injection Current
<0.5% In
Efficiency
Max. Efficiency
97.6%
Euro Efficiency
97.0%
MPPT Efficiency
>99%
Equipment Protection
Integrated
DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault circuit interrupter (optional), anti-islanding protection, DC switch, insulation impedance detection, residual current detection
Surge Protection Level
TYPE II (DC), TYPE II (AC)
Interface
Communication Interface
RS485/RS232/CAN
Monitor Mode
GPRS/Wi-Fi/Bluetooth/4G/LAN (optional)
General Data
Operating Temperature Range (℃)
-40 to +60℃, >45℃ Derating
Permissible Ambient Humidity
0–100%
Permissible Altitude
3000 m
Noise (dB)
≤55
Ingress Protection (IP) Rating
IP 65
Inverter Topology
Non-isolated
Overvoltage Category
OVC II (DC), OVC III (AC)
Cabinet Size (WxHxD mm)
386×660×250 (excluding connectors and brackets)
Weight (kg)
35.2
Type of Cooling
Intelligent Air Cooling
Warranty
5 years/10 years
The warranty period depends on the final installation site of the inverter; for further information, please refer to the warranty policy
Grid Regulation
IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105
Safety / EMC Standard
IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
✅ Connection to the national grid (EN 50549-1)✅ Colour display + touchscreen✅ CAN/RS485 communication port✅ Parallel function✅ Generator connection or PV surplus routing✅ 6 programmable periods for battery charging/discharging✅ Operates with or without low-voltage batteries✅ 19,200W input from solar panels✅ 12kW three-phase output power✅ WiFi module included, with free app✅ 10-year warranty
Download technical data sheetDownload EN user manualDownload certificate of conformity
The inverter is suitable for residential use, maximising the rate of self-consumption of solar energy and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by a diesel generator to ensure an uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE SUN-25K-SG01HP3-EU-AM2 hybrid inverter is a high-performance three-phase solution for large-scale commercial and industrial photovoltaic systems. With a power output of 25 kW, hybrid functionality and two MPPT trackers, this inverter ensures the efficient integration of solar energy, smart battery storage and a constant supply to consumers. It is ideal for prosumers and businesses looking to optimise their energy consumption and reduce their reliance on the grid.
Key technical data
Nominal output power: 25,000 W (25 kW)
Max. apparent AC power: 27,500 VA
Max. AC output current: 40 A
Number of MPPT channels: 2
Photovoltaic input voltage: up to 1,000 V
PV input current per tracker: 37.5 A
Max. PV input power: 32,000 W
Recommended PV input power: 24,000 W
Maximum efficiency: 97.6%
European efficiency: 97%
Protection rating: IP65 (dust and water resistant)
Weight: 90.5 kg
Dimensions: 408×638×237 mm (excluding connectors and brackets)
Connections: RS485 / RS232 / CAN, monitoring via GPRS/Wi-Fi/Bluetooth/4G
Key benefits
High power output of 25 kW – ideal for commercial and industrial applications.
Hybrid functionality – manages both solar generation and battery energy storage.
High efficiency (97.6%) – for minimal energy loss.
2 independent MPPT trackers – maximises output by adapting to different panel orientations and tilt angles.
Extensive compatibility – support for a wide range of Li-ion batteries.
Integrated protections – overvoltage, overcurrent, short-circuit, thermal protection and islanding detection.
Smart communication – via Wi-Fi, Bluetooth or GPRS for remote monitoring.
Robust IP65 construction – suitable for outdoor conditions.
Easy installation and maintenance – compact design and intuitive interface.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel function
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without high-voltage batteries
✅ 32,000W input from solar panels
✅ 25kW three-phase output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download EN user manual
Download the certificate of conformity
The inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by a diesel generator to ensure an uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE 80kW Hybrid Inverter, 6xMPPT, SUN-80K-SG02HP3-EU HV is the ideal solution for large-scale commercial and industrial applications. With 6 independent MPPT trackers, compatibility with high-voltage batteries and parallel connection capability, this inverter offers maximum flexibility and efficiency in any advanced photovoltaic system, whether on-grid or off-grid.
Compatible with 160–1000V LiFePO4 batteriesAlso works with diesel generatorsCompact design, IP65 – easy indoor or outdoor installationIntegration with monitoring systems: RS485 / CAN / WiFi / LAN / 4G (optional)
Key features:
Nominal AC power (grid): 80,000W
Maximum photovoltaic panel power: 160,000W
Number of MPPT: 6 independent trackers
PV operating voltage: 150 – 850V DC
HV battery compatibility: 160 – 1,000V DC
Battery charge/discharge current: 160A
Output voltage: 3-phase / 400V
Max. efficiency: 97.6%
Cooling: fan-cooled (intelligently controlled)
Dimensions: 606 × 927 × 314 mm
Weight: 97.5 kg
Protection rating: IP65 – suitable for outdoor use
Advanced features:
Up to 10 inverters can operate in parallel
Supports off-grid and backup operation (active phase L1)
Support for installation in self-consumption or grid-feed-in systems
Extensive communication: RS485 / CAN / WiFi / LAN / 4G (optional)
Compatible with EMS (Energy Management System)
Integrated protections:
Reverse polarity protection
AC/DC short-circuit protection
Residual current monitoring (RCD)
Type II overvoltage protection (AC and DC)
Anti-islanding protection and grid detection
Arc fault protection (optional)
The DEYE Hybrid 80kW, 6xMPPT, SUN-80K-SG02HP3-EU HV inverter is ideal for commercial, industrial or large prosumer applications. It can be integrated with high-capacity storage solutions, operates stably in any operating mode and delivers excellent performance in all seasons.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE SUN-10K-SG02LP1-EU-AM3 10kW 3xMPPT Hybrid Inverter is a high-performance single-phase solution, ideal for small-scale residential and commercial solar systems. This hybrid inverter supports both on-grid and off-grid operation, offering flexibility and reliability. Equipped with three MPPT trackers, it optimises solar energy capture and ensures efficient conversion. Support for low-voltage (LV) batteries and the ability to store energy from diesel generators make this inverter an ideal solution for energy self-sufficiency. With a charging and discharging capacity of up to 220A, IP65 protection and a colour touchscreen, this inverter is easy to integrate and manage in any system.
Technical data:
System: Single-phase
Rated power: 10kW
Maximum charging/discharging current: 220A
LV battery support: Yes
Nominal input/output voltage: 220/230V
Maximum efficiency: 97.6%
Protection rating: IP65
Number of MPPT trackers: 3
Advantages:
Compatible with LV batteries, offering flexibility in energy storage
Supports energy storage from diesel generators, ideal for remote locations
Allows parallel operation of up to 16 units for on-grid and off-grid operations
Intuitive interface with colour touchscreen for easy management
Multiple international certifications ensure compliance with various standards
✅ Operates on 48V low-voltage batteries
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel function
✅ Generator connection or PV surplus feed-in
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without batteries
✅ 15,000W input from solar panels
✅ 10kW single-phase output
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download EN user manual
Download the certificate of conformity
The inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The battery can also be charged by the diesel generator to ensure an uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE Hybrid 12kW 3xMPPT SUN-12K-SG02LP1-EU-AM3 inverter is a top-of-the-range single-phase inverter, designed for use in advanced solar systems. This hybrid inverter, compatible with low-voltage (LV) batteries, offers a versatile solution for energy management in both on-grid and off-grid applications. With three MPPT trackers, it maximises solar energy capture efficiency, and with a charging and discharging capacity of up to 250A, it is ideal for residential and commercial applications. Support for diesel generators and IP65 protection ensure safe and reliable operation in any environment. The colour touchscreen adds a touch of user-friendliness, making energy management easier than ever.
Technical data:
System: Single-phase
Rated power: 12kW
Maximum charge/discharge current: 250A
LV battery support: Yes
Nominal input/output voltage: 220/230V
Maximum efficiency: 97.6%
Protection rating: IP65
Number of MPPT trackers: 3
Advantages:
Compatibility with LV batteries for better energy storage management
Support for diesel generators, ideal for off-grid applications and remote locations
Allows parallel operation of up to 16 units, offering maximum flexibility
Multiple built-in protections and colour touchscreen for safe and intuitive operation
Certified to international standards for global use
✅ Operates with 48V low-voltage batteries
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel function
✅ Generator connection or PV surplus feed-in
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without low-voltage batteries
✅ 18,000W input from solar panels
✅ 12kW single-phase output
✅ WiFi module included, with free app
✅ 10-year warranty
Download technical data sheet
Download certificate of conformity
Download user manual EN
The inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The battery can also be charged by the diesel generator to ensure an uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE single-phase inverter is suitable for residential use, maximising the rate of self-consumption of solar energy and increasing energy efficiency. During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The ‘PV surplus’ function means that in off-grid mode, when the battery is charged to a certain set percentage, the inverter automatically begins to supply voltage via the dedicated port so that the energy produced by the panels is not wasted. The battery can also be charged by the diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel operation of up to 16 units
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without low-voltage batteries
✅ 20,800W input from solar panels
✅ 16kW single-phase output
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download user manual (EN)
Download user manual (RO)
Download certificate of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE 12kW inverter with 20.48kWh storage, model AI-W5.1-12P3-EU-B, is the ideal solution for efficient energy management in both residential and commercial settings. This all-in-one system combines a 12 kW three-phase hybrid inverter with a scalable 20.48 kWh storage capacity, offering a robust and flexible solution for your energy needs.
Key Features:
All-in-One Design: Includes a 12 kW three-phase hybrid inverter and a modular, scalable 20.48 kWh battery.
Easy Control: The system can be managed via an intuitive app, PC interface or touchscreen, offering maximum flexibility to users.
Smart Applications: Advanced features such as peak shaving, smart load management and AC coupling optimise energy usage and reduce costs.
Safe and Modular Battery: The LiFePO4 battery is designed for maximum safety and can be scaled according to requirements.
Quick Installation: The flat, stackable design allows for easy floor mounting, without the need for additional cables or fixing screws.
Uninterrupted Power Supply: A fast switching time of just 4 ms ensures a stable and reliable power supply even during power cuts.
Technical Specifications:
Rated Output Power / UPS Power: 12,000 W
AC output frequency and voltage: 50/60 Hz; 3L/N/PE 220/380, 230/400 Vac (three-phase)
Battery operating voltage: 43.2 V to 57.6 V
Enclosure IP rating: IP65, ensuring maximum protection against dust and water
System certifications: IEC62619, IEC60730, CE, VDE2510-50, IEC 0-21
Grid certifications for standards: VDE4105 , IEC61727/62116, VDE0126, AS4777.2, IEC 0-21, EN50549-1, G98, G99, C10-11, UNE217002, NBR16149/NBR16150
Warranty: 10 years
Installation:
The DEYE 12kW Inverter + 20.48kWh Storage, AI-W5.1-12P3-EU-B is designed to facilitate quick and efficient installation. Its flat, stackable design allows for direct floor mounting, eliminating the need for additional cables or fixing screws. This simplifies the installation process and reduces the time required for deployment.
Benefits:
This Deye All-in-One energy storage system is ideal for those who wish to optimise energy consumption, reduce grid dependency and ensure a reliable energy supply. Its advanced features, easy installation and user-friendly control options make this system a top solution on the market. By investing in the Deye All-in-One energy storage system, you will take control of your energy future, ensuring a stable and efficient energy source.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN communication port
✅ Parallel function
✅ Generator connection or PV surplus routing
✅ 15,600W input from solar panels
✅ 12kW three-phase output
✅ 10-year warranty
Download the 12kW inverter technical data sheet
Download the All-in-One technical data sheet
Download the certificate of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE Hybrid 15kW inverter, model SUN-15K-SG05LP3-EU-SM2, is the ideal solution for high-performance solar power systems. Designed to ensure efficient energy management, this three-phase inverter offers an excellent combination of performance and versatility, being compatible with both the mains grid and off-grid systems. The inverter is also equipped with advanced dual MPPT technology, enabling optimised solar energy capture even under variable conditions.
Technical Data/Features:
Rated Power: 15 kW
Number of MPPT (Maximum Power Point Tracking): 2
Maximum PV Input Voltage: 800 V
Maximum PV Input Power: 16,000 W
Maximum PV Input Current: 22.8 A
Maximum Charge/Discharge Current: 280 A
Compatible Battery Type: Lithium-ion or Lead-acid
Battery Voltage Range: 40–60 V
Maximum Efficiency: 97.6%
European Efficiency: 97.0%
Power Factor: Adjustable from 0.8 lagging to 0.8 leading
Operating Temperature Range: -40°C to +60°C, with derating above 45°C
Integrated Protections: AC overload protection, AC/DC overvoltage protection, ground fault current monitoring, arc fault circuit interrupter, DC terminal insulation monitoring, AC short-circuit protection and DC current injection monitoring.
Protection Rating: IP65, ideal for outdoor use
Communication and Monitoring: GPRS, Wi-Fi, Bluetooth, 4G, LAN (optional), RS485/RS232/CAN interface
Weight: 50.6 kg
Dimensions: 456 x 750 x 268.5 mm
This inverter also offers the ability to operate in parallel with up to 10 units to support higher loads, thus ensuring the flexibility required for complex solar energy projects. Its intelligent air-cooling system ensures stable and efficient operation in any environment.
For users wishing to upgrade their existing solar systems, the inverter allows integration with energy storage systems and diesel generators, thereby offering greater autonomy and security.
✅ Grid connection (EN50549-1)
✅ Operates on low-voltage batteries
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel operation
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without batteries
✅ 22,500W input from solar panels
✅ 15kW three-phase output
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download manual
Download the certificate of conformity
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE 20kW Hybrid Inverter, model SUN-20K-SG05LP3-EU-SM2, is the flagship model in DEYE’s range of three-phase hybrid inverters. Designed to meet the most demanding requirements for efficiency and reliability, this inverter is ideal for large-scale solar installations, for both residential and commercial applications. Featuring advanced dual MPPT technology and support for low-voltage batteries, the inverter ensures optimised energy management, maximising the performance and efficiency of the solar system.
Technical Data/Features:
Rated Power: 20 kW
Number of strings: 4
Maximum PV Input Voltage: 800 V
Maximum PV Input Power: 22,000 W
Maximum PV Input Current: 30.4 A
Maximum Charge/Discharge Current: 350 A
Compatible battery type: Lithium-ion or Lead-acid
Battery Voltage Range: 40–60 V
Maximum Efficiency: 97.6%
European Efficiency: 97.0%
Power Factor: Adjustable from 0.8 lagging to 0.8 leading
Operating Temperature Range: -40°C to +60°C, with derating above 45°C
Integrated Protections: AC overload protection, AC/DC overvoltage protection, ground fault current monitoring, arc fault circuit interrupter, DC terminal insulation monitoring, AC short-circuit protection and DC current injection monitoring.
Protection Rating: IP65, suitable for outdoor installations
Communication and Monitoring: GPRS, Wi-Fi, Bluetooth, 4G, LAN (optional), RS485/RS232/CAN interface
Weight: 54 kg
Dimensions: 456 x 750 x 268.5 mm
The DEYE Hybrid 20kW inverter is ideal for solar projects requiring high energy production capacity, offering a flexible and efficient solution. With the ability to operate in parallel with up to 10 units, this inverter can easily adapt to extensive energy requirements, ensuring continuity and stability of power supply.
Capable of managing power from diesel generators and integrating multiple batteries in parallel, this model offers a comprehensive and versatile solution for any type of solar installation, whether new or existing. The intelligent cooling system ensures efficient operation even in the harshest environmental conditions, maintaining performance at an optimal level.
✅ Grid connection (EN50549-1)
✅ Operates on low-voltage batteries
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel operation
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without batteries
✅ 30,000W input from solar panels
✅ 20kW three-phase output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download manual
Download certificate
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE single-phase inverter is suitable for residential use, maximising the rate of self-consumption of solar energy and increasing energy efficiency. During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any excess energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The ‘PV surplus’ function means that in off-grid mode, when the battery is charged to a certain set percentage, the inverter automatically begins to supply voltage via the dedicated port so that the energy the panels can produce is not wasted. The battery can also be charged by the diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel function
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Passive cooling
✅ Operates with or without low-voltage batteries
✅ 4680W input from solar panels
✅ 3.6kW output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download user manual EN
Download user manual (RO)
Download certificate of conformity
The inverter is suitable for residential use, maximising the rate of self-consumption of solar energy and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The ‘PV surplus’ function means that in off-grid mode, when the battery is charged to a certain set percentage, the inverter automatically begins to supply voltage via the dedicated port so that the energy produced by the panels is not wasted. The battery can also be charged by the diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE single-phase inverter is suitable for residential use, maximising the rate of self-consumption of solar energy and increasing energy efficiency. During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any excess energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The ‘PV surplus’ function means that in off-grid mode, when the battery is charged to a certain set percentage, the inverter automatically begins to supply voltage via the dedicated port so that the energy the panels can produce is not wasted. The battery can also be charged by the diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel function
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Passive cooling
✅ Operates with or without low-voltage batteries
✅ 8000W input from solar panels
✅ 5kW output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download EN user manual
Download certificate of conformity
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE SUN-10K-SG05LP3-EU-SM2 Hybrid Inverter is a powerful three-phase solution designed for residential and small commercial photovoltaic systems. With a rated power output of 10 kW, hybrid functionality, and advanced energy management capabilities, this inverter enables the efficient integration of solar power, battery storage, and a stable energy supply for connected loads. It is the ideal choice for users looking to maximize self-consumption, increase energy independence, and reduce reliance on the utility grid.
Model
SUN-3K-SG05LP3-EU-SM2
SUN-4K-SG05LP3-EU-SM2
SUN-5K-SG05LP3-EU-SM2
SUN-6K-SG05LP3-EU-SM2
SUN-8K-SG05LP3-EU-SM2
SUN-10K-SG05LP3-EU-SM2
SUN-12K-SG05LP3-EU-SM2
Battery Input Data
Battery Type
Lead-acid or Lithium-ion
Battery Voltage Range (V)
40–60
Max. Charging Current (A)
70
95
120
135
190
210
240
Max. Discharge Current (A)
70
95
120
135
190
210
240
Charging Strategy for Li-ion Battery
Self-adaptation to BMS
Number of Battery Inputs
1
PV String Input Data
Max. PV Input Power (W)
6000
8000
10,000
12,000
16,000
20,000
24,000
Max. PV Input Power (W)
4500
6400
8000
9600
12800
16,000
19200
Max. PV Input Voltage (V)
800
Start-up Voltage (V)
160
MPPT Voltage Range (V)
200–650
Rated PV Input Voltage (V)
550
Max. Operating PV Input Current (A)
20+20
20+20
20+20
20+20
26+26
26+26
26+26
Max. Input Short-Circuit Current (A)
30+30
30+30
30+30
30+30
39+39
39+39
39+39
No. of MPP Trackers / No. of Strings MPP Tracker
2 / 1+1
2 / 1+1
2 / 1+1
2 / 1+1
2 / 2+2
2 / 2+2
2 / 2+2
AC Input/Output Data
Rated AC Input/Output Active Power (W)
3000
4000
5000
6000
8000
10,000
12,000
Max. AC Input/Output Apparent Power (VA)
3300
4400
5500
6600
8800
11,000
13200
Rated AC Input/Output Current (A)
4.6/4.4
6.1/5.8
7.6/7.3
9.1/8.7
12.2/11.6
15.2/14.5
18.2/17.4
Max. AC Input/Output Current (A)
5/4.8
6.7/6.4
8.4/8
10/9.6
13.4/12.8
16.7/16
20/19.2
Max. Continuous AC Passthrough (grid to load) (A)
45
Peak Power (off-grid) (W)
2 times rated power, 10s
Power Factor Adjustment Range
0.8 leading to 0.8 lagging
Rated Input/Output Voltage/Range (V)
220/380V, 230/400V, 0.85Un–1.1Un
Rated Input/Output Grid Frequency/Range (Hz)
50/45–55, 60/55–65
Grid Connection Type
3L+N+PE
Total Current Harmonic Distortion THDi
<3% (of rated power)
DC Injection Current
<0.5% In
Efficiency
Max. Efficiency
97.6%
Euro Efficiency
97.0%
MPPT Efficiency
>99%
Equipment Protection
Integrated
DC reverse polarity protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, arc fault circuit interrupter (optional), anti-islanding protection, DC switch, insulation impedance detection, residual current detection
Surge Protection Level
TYPE II (DC), TYPE II (AC)
Interface
Communication Interface
RS485/RS232/CAN
Monitor Mode
GPRS/Wi-Fi/Bluetooth/4G/LAN (optional)
General Data
Operating Temperature Range (℃)
-40 to +60℃, >45℃ Derating
Permissible Ambient Humidity
0–100%
Permissible Altitude
3000 m
Noise (dB)
≤55
Ingress Protection (IP) Rating
IP 65
Inverter Topology
Non-isolated
Overvoltage Category
OVC II (DC), OVC III (AC)
Cabinet Size (WxHxD mm)
386×660×250 (excluding connectors and brackets)
Weight (kg)
35.2
Type of Cooling
Intelligent Air Cooling
Warranty
5 years/10 years
The warranty period depends on the final installation site of the inverter; for further information, please refer to the warranty policy
Grid Regulation
IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE Directive R25, G98, G99, VDE-AR-N 4105
Safety / EMC Standard
IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2
✅ Connection to the national grid (EN 50549-1)✅ Colour display + touchscreen✅ CAN/RS485 communication port✅ Parallel function✅ Generator connection or PV surplus routing✅ 6 programmable periods for battery charging/discharging✅ Operates with or without low-voltage batteries✅ 13,000W input from solar panels✅ 10kW three-phase output power✅ WiFi module included, with free app✅ 10-year warranty
Download technical data sheetDownload EN user manualDownload certificate of conformity
The inverter is suitable for residential use, maximising the rate of self-consumption of solar energy and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by a diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The DEYE single-phase inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The ‘PV surplus’ function means that in off-grid mode, when the battery is charged to a certain set percentage, the inverter automatically begins supplying voltage via the dedicated port so that the energy generated by the panels is not wasted. The battery can also be charged by the diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel function
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Passive cooling
✅ Operates with or without low-voltage batteries
✅ 12,800W input from solar panels
✅ 8kW output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download user manual (EN)
Download the certificate of conformity
The inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The ‘PV surplus’ function means that in off-grid mode, when the battery is charged to a certain set percentage, the inverter automatically begins supplying voltage via the dedicated port so that the energy produced by the panels is not wasted. The battery can also be charged by the diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The inverter is suitable for residential use, maximising the rate of solar energy self-consumption and increasing energy efficiency. During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by a diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel function
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without low-voltage batteries
✅ 10,400W input from solar panels
✅ 8kW three-phase output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download user manual (EN)
Download user manual (RO)
Download certificate of conformity
The inverter is suitable for residential use, maximising the rate of self-consumption of solar energy and increasing energy efficiency. During the day, the photovoltaic system generates electricity which will initially be supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to become a prosumer. The battery can also be charged by the diesel generator to ensure uninterrupted power supply in the event of a grid outage. It is equipped with an RS485/CAN port for battery communication.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The SUN-30K-SG01HP3-EU-BM3 is a three-phase hybrid inverter capable of operating with a 160–800 V high-voltage battery, ensuring system efficiency and reduced heat dissipation. With a compact design and high power density, this series supports a DC/AC ratio of 1.3, saving on equipment investment. It supports unbalanced three-phase output, expanding application scenarios.
During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to enable prosumer applications.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to provide efficient and reliable products. For example, Deye adopts the T-type three-level topology and the enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to conventional SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel operation of up to 10 units
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without high-voltage batteries
✅ 39,000W input from solar panels
✅ 30kW three-phase output power
✅ WiFi module included, with free app
✅ 10-year warranty
Download the technical data sheet
Download EN user manual
Download certificate of conformity
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The SUN-40K-SG01HP3-EU-BM4 is a three-phase hybrid inverter capable of operating with a 160–800 V high-voltage battery, ensuring system efficiency and reduced heat dissipation. With a compact design and high power density, this series supports a DC/AC ratio of 1.3, saving on equipment investment. It supports unbalanced three-phase output, expanding application scenarios.
During the day, the photovoltaic system generates electricity which is initially supplied to the loads. Any surplus energy will then charge the battery or be fed into the grid. The inverter complies with the EN50549-1 standard, meaning it can be successfully used to enable prosumer applications.
Ningbo Deye Inverter Technology Co., Ltd., founded in 2007 with a registered capital of 300 million RMB, is one of China’s high-tech enterprises and a subsidiary of the Deye Group. With a factory area of over 15,000 m² and comprehensive production and testing facilities, Deye has become a major player in the global solar inverter market.
Ningbo Deye Inverter Technology Co., Ltd. is dedicated to providing complete photovoltaic energy system solutions, including solutions for residential and commercial power plants. Deye also offers the right device for every application: for all types of modules, for grid-connected and off-grid systems, as well as for hybrid inverter systems, for small-scale systems and commercial systems in the megawatt range. Among these, the power of the grid-connected PV inverter ranges from 1.5–110 kW, the hybrid inverter from 3 kW–50 kW, and the microinverter from 300 W–2000 W.
As a technology-oriented company, Deye has always been committed to researching and developing cutting-edge technologies to deliver efficient and reliable products. For example, Deye adopts a T-type three-level topology and an enhanced SVPWM algorithm to further improve conversion efficiency by 0.7% compared to standard SPWM.
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Parallel operation of up to 10 units
✅ Generator connection or PV surplus routing
✅ 6 programmable periods for battery charging/discharging
✅ Operates with or without high-voltage batteries
✅ 52,000W input from solar panels
✅ 40kW three-phase output
✅ WiFi module included, with free app
✅ 10-year warranty
Download technical data sheet
Download user manual (EN)
Download user manual (RO)
Download certificate of conformity
