10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. UNI-T UT620C+ digital microohm meter. It is a highly accurate portable resistance meter, capable of measuring resistance values from microohms to megaohms. It is ideal for testing and maintaining large equipment, such as measuring winding resistance and welding large motors and stators for hybrid and electric vehicles. It is widely used in telecommunications, distribution systems, petrochemicals, industrial equipment earthing systems, etc.The UT620C+ consists of a meter (featuring a large LCD display), PC software, test leads and a communication cable.
Product parameters:
- fine resolution 1μΩ- resistance measurement range 1μΩ to 300.0KΩ- accuracy up to ±0.1% FS- measurement current ≤ 1A- storage of 500 data sets- large LCD display- Auto power-off, extended standby time- lithium battery- compact design, easy to carry/>
Technical parameters:
- resistance range / max. test current / resolution: 100.1kΩ ～ 300.0kΩ/ 3μA ±(2%+6) / 100Ω 10.01 kΩ ～ 100.00 kΩ / 3 μA ±(5%+6) / 10 Ω. 10 μA ±(2%+6) / 1 Ω 100.1Ω ～ 1000.0Ω/ 100μA ±(5%+6) / 0.1Ω 10.01Ω ～ 100.00Ω/ 1mA ±(.2%/+6Ω)0.1Ω ～ 10,000Ω/ 10mA ±(5%+6) / 0.001Ω 100.1 mΩ to 1000.00 mΩ / 100 mA ±(2%+6) / 0.1 mΩ 0.001 mΩ/0.01 Ω～ ±(5%+6) / 0.01/0.001 mΩ
- Resistance measurement of all types of wires, switches, connectors, contactors, fuses, coils, transformer windings, etc.- precise 4-wire method- test current: ≤1A- open-circuit protection: ≤1A- ≤4A-2 ≤36V AC/DC- Measurement power: ≤8W- Measurement rate of approximately 2 times/s- Automatic shutdown after 15 minutes if no operation is performed- USB Type-C input interface- Display backlight- Low battery indicator- IP54 protection rating- Battery capacity: 3200 mAh- Product colour: black + red- product weight 480 g (including battery)- Product dimensions: 161 mm × 117 mm × 68 mm
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT622A LRC is a portable component tester for inductors, resistors and capacitors and their secondary properties: D (dissipation factor), Q (quality factor), Θ (phase angle in degrees), Θ (phase angle in radians) and ESR (equivalent series resistance). Component parameters are measured using AC voltage with a selectable frequency of 100, 120, 1000, 10000 Hz and a selectable amplitude of 0.1Vrms, 0.3Vrms, 1.0Vrms at a signal source output impedance of 100Ω. The highest measurement accuracy is 0.1%.
The device features an intuitive 2.8-inch TFT LCD display with ten-step adjustable backlight brightness, a built-in high-capacity 1800mAh Li-Pol battery, and a miniUSB connector for charging and data transfer to a computer. The maximum display value when measuring primary parameters is 99999, and the minimum value when measuring secondary parameters is 0.0001. Measurement mode – a measurement triggered by a TRI button or a command from a PC; or continuous measurement with adjustable test start rate of 20x/sec, 5x/sec, 2x/sec. 2 + 1 or 4 + 1 terminal configuration (following the purchase of UTR-L100k-H test cables).
Thanks to its technological sophistication, the device is also suitable for professional use – when used with a computer (PC), it creates a station for sorting components according to specified parameters and can be used in production lines, laboratories, etc.
parameters
:
- manual RLC meter for primary and secondary component parameters
- intuitive TFT LCD display, large backlit screen, 10 brightness levels
- display range up to 99,999
- maximum accuracy 0.1%
- option to select components based on AC voltage, tolerance 10, specified tolerance 10
1000 or 10000 Hz
- Selectable amplitude measurement voltage: 0.1Vrms, 0.3Vrms, 1.0Vrms
- selection of equivalent mode (for Z <100Ω in series, for Z > 10kΩ in parallel)
- automatic identification of built-in components
- high capacity Li-ion battery: 180 mAh
- Power supply + charging: DC adapter 5V ± 0.25V, > 1A
- operating time on a single battery charge: typically 8 hours
- functions in recording mode and data statistics: AVG, MAX, MIN
- beep when buttons are pressed: yes, button can be activated:
on/off switch
automatic switch-off: yes after 5, 15, 30, 60 minutes or off
- Data interface: mini USB
- data transfer rate to computer: 9600/19200/38400 baud
- Acoustic and visual alarm comparison of tolerance results: off, pass, fail
- alarm selection: short beep
- short beep, long beep
Open circuit or short circuit tester reset: yes
- setting of tolerance value from nominal: 1% to 20%, default 5%
- Component counting: all, compliant, non-compliant
Technical parameters:
- Primary impedance measurement range / minimum resolution parameters: range
inductance L // 0.001 μH to 9999.9 H // 1 / 0.1 / 0.01 / 0.001 μH
capacitance C // 0.001 pF to 99.999 mF // 1 / 0.1 / 0.01 / resistance R // 0.01 / 0.01 / 0.0001 Ω to 99.999 MΩ // 0.0001 Ω
Total impedance Z // 0.0001 Ω to 99.999 MΩ // 0.0001 Ω
- Measurement range of secondary impedance parameters // display range of the factor //
resolution parameters // minimum display range //
// 0.0001 to 9.9999 // 0.0001
Quality factor Q // 0.0001 to 99999 // 0.0001
phase angle in degrees Θ deg // -179.9° to 179.99° // 0.0001
phase angle in degrees Θ deg // -179.9° to 179.99° // 0.0001
phase angle in 0.0001 to 9.9999 -3.142 rad to 3.1416 rad // 0.001 rad
Equivalent resistance ESR // 0.01 mΩ to 999.99 Ω // 0.01 mΩ
- display: backlit TFT LCD display with a diagonal of 2.8 inches:
-999999999999999999999999999999999999999999999999999 0.1%
- component selection based on set tolerance: yes
- voltage measurement: AC 100, 120, 1000 or 10000 Hz
- amplitude measurement: 0.1 Vrms, 0.3 Vrms, 1.0 Vrms,
data transfer to PC: via PC software
- power supply: 1800mAh Li-Pol battery and (or) 5V ± 0.25V DC adapter, > 1A
- automatic charging management: even when the device is switched off
- Charging and data interface: mini USB
- operating environment: temperature 5 to 35°C, humidity <0% by weight
- 305g
- Product dimensions (H x W x D): 190 x 90 x 44 mm
- package dimensions: 225 x 220 x 63 mm
- Safety and EMC certification: IEC / EN61010-1: 2010, EN61326-2: 2013:- EN61326-2: 2013:- 2013
Contents of individual package:
- UT622A device: 1 pc
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The UT622C LRC device is a portable component tester — coils (inductance), resistors (resistance) and capacitors (capacitance) — and their secondary properties: D (loss factor), Q (quality factor), Θ (phase angle in degrees), Θ (phase angle in radians) and ESR (equivalent series resistance or parallel resistance). Component parameters are measured using alternating voltage with a selectable frequency of 100, 120, 1000, 10000 Hz, 100 kHz and a selectable amplitude of 0.1 Vrms, 0.3 Vrms, 1.0 Vrms at a signal source output impedance of 100Ω. The highest measurement accuracy is 0.1%.
The device features an intuitive 2.8-inch TFT LCD display with ten-level adjustable backlight brightness, a built-in high-capacity 1800mAh Li-Pol battery and a miniUSB connector for charging and data transfer to a computer. The maximum display value when measuring primary parameters is 99999, and the minimum value when measuring secondary parameters is 0.0001. Measurement mode – a measurement triggered by the TRI button or a command from a PC; or continuous measurement with adjustable test trigger rates of 20x/sec, 5x/sec, 2x/sec. 2+1 or 4+1 terminal configuration (with UTR-L100k-H test cables included with this device).
Thanks to its technological sophistication, the device is also suitable for professional use – when connected to a computer (PC), it creates a component sorting station based on specified tolerance parameters and can be used in production lines, laboratories, etc. Intuitive TFT LCD display, 10 brightness levels
- display range up to 99,999
- maximum accuracy 0.1%
- Ability to select components according to specified tolerance
- AC voltage measurement: 100, 120, 1000 Hz / 0–1000 Hz amplitude measurement. Voltage: 0.1 Vrms, 0.3 Vrms, 1.0 Vrms
- selection of equivalent mode (for Z <100Ω in series, for Z >10kΩ in parallel)
- automatic component identification
- built-in high-capacity Li-Pol battery: 3.7V/1800 mAh: DC +5V charging power supply
±0.25V, >1A
- operating time on a single battery charge: typically 8 hours
- Functions in data logging and statistics mode: AVG, MAX, MIN
- Audible tone when buttons are pressed: yes, can be disabled/enabled
- button lock option: yes
1, 6, automatic after shutdown minutes, or off
- Data interface: mini USB
- Data transfer rate to PC: 9600/19200/38400 baud
- Audible and visual alarm for tolerance comparison results: off, pass, fail
- Audible alarm selection: short beep, long beep, two short beeps
in case of open circuit or short circuit reset
: yes
- Setting of tolerance value from nominal: 1% to 20%, default 5%
- Component counting: all, compliant, non-compliant
Technical parameters:
- Measurement range for primary impedance parameters:
type // minimum resolution within the display range 0.001 μH to 9999.9 H // 1 / 0.1 / 0.01 / 0.001 μH
capacitance C // 0.001 pF to 99.999 mF // 1 / 0.1 / 0.01 / 0.001 / 0.001 pF at 0.001 pF resistance ///>0.0 R0.0. 99.999 MΩ // 0.0001 Ω
Total impedance Z // 0.0001 Ω to 99.999 MΩ // 0.0001 Ω
- Measurement range of secondary impedance parameters:
type // minimum resolution // 0.000 display range ////0000 display range 9.9999 // 0.0001
Quality factor Q // 0.0001 to 99999 // 0.0001
phase angle in degrees Θ degrees // -179.9° to 179.99° // 0.01°
phase angle in rad / 2 radians -Θ. 3.1416 rad // 0.001 rad
Equivalent resistance ESR // 0.01 mΩ to 999.99 Ω // 0.01 mΩ
- display: backlit TFT LCD display with a diagonal of 2.8" and a resolution of 320 x 240 pixels
-9999999 pixels. Accuracy: best 0.1%
- Component selection based on set tolerance: yes
- voltage measurement: AC 100, 120, 1000, 10000 Hz or 100 kHz
- Voltage amplitude measurement: 0.1 Vrms, Vrms, 0.1 Vrms, data transfer 0.1 Vrms, 0. Yes, after installing the software on a PC
- power supply: 1800mAh Li-Pol battery and/or 5V ±0.25V DC adapter, >1A
- automatic charging management: even when the device is switched off
- Charging and data interface: mini USB
- Operating environment: temperature 5 to 35°C, humidity ≤ 35% - Weight with/without battery: 305g / 420g
- Product dimensions (H x W x D): 192 x 93 x 44 mm
- Package dimensions: 225 x 220 x 63 mm
- Safety and EMC certification: IEC/EN 61010-1: 2010, EN 2013206, EN 61326-2-2: 2013
Contents of individual package:
- UT622C device: 1 pc UTR-001 box: 1 pc
- user manual: 1 pc
Packaging for bulk customers:
- standard quantity per box: 10 pcs
- standard box dimensions: 370 x 305 x 475 mm
- gross weight of 2 cartons: 2 kg
MANUFACTURER: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT622E LRC is a portable component tester for inductors, resistors and capacitors, measuring overall impedance Z and DC resistance DCR, as well as their secondary properties: D (loss factor), Q (quality factor), Θ (phase angle in degrees), Θ (phase angle in degrees), Θ (phase angle in series or equivalent radians (resistors) and ESR (parallel resistance). Component parameters are measured using AC voltage with a selectable frequency of 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz and a selectable amplitude of 0.1 Vrms, 0.3 Vrms, 1.0 Vrms at a signal source output impedance of 1100Ω. Unlike the UT622A, the UT622E also offers the option to measure using a DC voltage of 1.0 V. The highest measurement accuracy is 0.1%.
The device features an intuitive 2.8-inch TFT LCD display with ten-step adjustable backlight brightness, a built-in high-capacity 1800mAh Li-Pol battery, and a miniUSB connector for charging and data transfer to a computer. The maximum display value when measuring primary parameters is 99999, and the minimum value when measuring secondary parameters is 0.0001. Measurement mode – a measurement triggered by a TRI button or a command from a PC; or continuous measurement with adjustable test start rate of 20x/sec, 5x/sec, 2x/sec. Terminal configuration 4 + 1n (UTR-L100k-H) or 2 + 1 (after purchasing UTR-002 test cables with crocodile clips).
Thanks to its technological sophistication, the device is also suitable for professional use – together with a computer (PC), it creates a station for sorting specified parameters in laboratories, production lines and is compliant with laboratory standards, etc.
Product parameters:
- manual RLC meter for primary and secondary component parameters
- intuitive TFT LCD display, large backlight, 10 brightness levels
- display range up to 99,999
- Maximum accuracy for specified components
- 1% selectable
/- 1% selectable for components measuring AC voltage at 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz
- Selectable AC voltage range: 0.1 Vrms, 0.3 Vrms, 1.0 Vrms
- DCR measurement capability with 1.0 V DC-equivalent in series, for Z > 10 kΩ in parallel)
- automatic component identification
- Built-in high-capacity Li-Pol battery: 1800 mAh
- Power supply + charging: DC adapter 5V ± 0.25V, > 1A
- Operating time on a single battery charge: typically 8 hours, including AV-G recording and statistics functions
MIN
- beep when buttons are pressed: yes, can be switched on/off
- button lock: yes
- auto-off: yes, after 5, 15, 30, 60 minutes or off
- Data interface: mini USB
- data transfer rate to PC: 94,000/3,000,000,000 comparison of audible and visual tolerance results: off, pass, fail
- audible alarm selection: short beep, long beep, two short beeps
- Open circuit or short circuit tester reset: yes
- Setting of tolerance value from nominal: 1% to 20%, default 5%
- Counting of all components: non-compliant
Technical parameters:
- Measurement range for primary impedance parameters:
type // display range // minimum resolution in the
inductance L // 0.001 μH to 9999.9 H // 1 / 0.01 μ / 0.001 μ /
capacitance C // 0.001 pF to 99.999 mF // 1 / 0.1 / 0.01 / 0.001 pF
resistance R // 0.0001 Ω to 99.999 MΩ // 0.0001 Ω
Total impedance
0909/0Ω. // 0.0001 Ω
DC resistance DCR // 0.1 mΩ to 999.99 kΩ // 0.1 mΩ
- Measurement range for secondary impedance parameters:
type // display range // minimum resolution within the range
D loss factor // 9/90000000 // 1 // 9000000. 0.0001
Quality factor Q // 0.0001 to 99999 // 0.0001
phase angle in degrees Θ // -179.9° to 179.99° // 0.01°
phase angle in radians Θ / 1 rad // 6 rad // 3.1 rad // 0.001 rad
Equivalent resistance ESR // 0.01 mΩ to 999.99 Ω // 0.01 mΩ
- display: backlit TFT LCD display with a diagonal of 2.8"
- display range: maximum 99999
- component setting accuracy
- 1%: tolerance in accordance with best fit
-. yes
- Measurement in DCR mode: DC voltage 1.0V
- AC voltage measurement: AC 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz
- measurement voltage range: 0.1 Vrms, 0.3 Vrms, data transfer 0.3 Vrms,
Vrms, yes, after installing the software on the PC
- Power supply: 1800mAh Li-Pol battery and (or) 5V ± 0.25V DC adapter, > 1A
- automatic charging management: even when the device is switched off
- Charging and data interface: mini USB
- operating environment: temperature 5 to 80°C, humidity ≤ 30% without batteries: 305g
- Product dimensions (H x W x D): 190 x 90 x 44 mm
- Package dimensions: 225 x 220 x 63 mm
- Safety and EMC certification: IEC / EN61010-1: 2010, EN61326-2:-2:-2:6 2013
Contents of individual package:
- UT622E device: 1 pc
- USB interface cable: 1 pc
- UTR-L100k-H four-pole test leads: 1 pc
- Gold-plated short-circuit test lead: UTR-1-circuit
1 pc
MANUFACTURER: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT658 USB Tester
This product comes with a 3-year warranty. This tester uses an input and an output connector to measure not only the actual voltage and current drawn from the USB, but also calculates the total current from which it calculates the charging capacity. The tester is suitable for checking the capacity of power banks, mobile phone batteries, tablets and anything else that charges via this port. We can also measure the usage of a flash drive or external hard drive, which often exceeds the limits of USB 2.0. This tester has an independent power memory for 10 values, so you can recall the last value after disconnecting and reconnecting.
UT658 - Wireless USB Cable
UT658B - USB connector with 10 cm cable
Product specifications:
- memory: 10 values
- LCD display
Technical specifications:
- Input voltage range: 3 V: ---9
- Voltage monitoring accuracy: ± 1 %
- Current monitoring range: 0 A – 3 A
- Current monitoring accuracy: ± (1 % + 2)
- Current resolution: 0.01 A
- Energy: 0–9999 mAh
- Dimensions: 8 x 28 mm x 28 mm
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT658B USB Tester
This product comes with a 3-year warranty. This tester uses an input and an output connector to measure not only the actual voltage and current drawn from the USB port, but also to calculate the total current, from which it calculates the charged capacity. The tester is suitable for checking the capacity of power banks, mobile phone batteries, tablets and anything else that charges via this port. We can also measure the usage of a flash drive or external hard drive, which often exceeds the limits of USB 2.0. This tester has an independent power memory for 10 values, so you can recall the last value after disconnecting and reconnecting.
UT658 - Wireless USB Cable
UT658B - USB connector with 10 cm cable
Product specifications:
- memory: 10 values
- LCD display
Technical specifications:
- Input voltage range: 3 V: ---9
- Voltage monitoring accuracy: ± 1 %
- Current monitoring range: 0 A – 3 A
- Current monitoring accuracy: ± (1 % + 2)
- Current resolution: 0.01 A
- Energy: 0–9999 mAh
- Dimensions: 8 x 28 mm x 28 mm
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT658DUAL USB Tester
This product comes with a 3-year warranty. The UT658DUAL USB Tester is the second generation of the UT658 series. It can test USB chargers, portable power banks, USB-A and USB-C cables, and other electronic chargers. The UT658DUAL measures output voltage, current, power, capacitance, internal resistance of the power supply, and the D+ and D- voltages of USB data cables. If the measured input voltage exceeds 24 V or the measured current exceeds the permitted current, the device automatically switches off and ‘OL’ appears on the screen. The warning symbol ‘LO’ appears when the input voltage is below 4 V. This range is designed to be accurate, reliable, stable and portable. They are great tools for applications such as production verification, technical testing and DIY.
Product specifications:
- designed to control USB-A and USB-C charging outputs
- the four-line display shows voltage, current output, delivered capacity in mAh and charging time simultaneously
0 hours, including the charging process (up to 100 mAh) recording of 10 sets of measurements
- supports QC protocols for fast charging
- max. input voltage: 24V
- Max. charging current via USB-A: 3A
- max. charging current via USB-C: 4A
Technical parameters:
- Input and output ports: USB-A + USB-C
- Input voltage measurement range: 4 ~ 24VDC, resolution 0.01 V
- Input current measurement range via USB-A, input resolution: 30.0 A
- Input current measurement range via USB-C input: 0.05 ~ 5A / DC, resolution 0.01 A
- Measurement range for capacity delivered to the connected battery: 0 ~ 99999 mAh, resolution 1 mAh
- Measurement range of energy supplied to the equivalent circuit Wh10/0-00000 ~ Wh of the connected battery: measurement: 1 ~ 480Ω
- USB data cable voltage measurement (D+, D-): 0 ~ 3.3 V
- Saving measurement records to data storage: 10 sets
- Maximum measurement recording time: 99h, 59min, 59sec; resolution 1s
- Fast charging (USB-A input): fast charging protocol up to QC 3.0
- fast charging (USB-C input): fast charging protocol up to QC 4.0
- product dimensions: 93 mm x 55 mm x 13 mm
- net product weight: 65.8 g product colour:
- white
Package contents:
- UT658DUAL tester
- user manual
Wholesale packaging:
- standard quantity per box: 60 pcs
- standard box dimensions: 280 mm x 220 mm x 225 mm gross box weight:
- 5 kg gross weight
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT663B 360° rotating industrial borescope.
The UNI-T UT663B series industrial borescope is specially designed and manufactured to meet market demands for complex environments that are beyond the reach of the human eye. The camera is equipped with 180° bidirectional rotation, allowing it to navigate around blind spots and adjust angles, making it suitable for various narrow and curved spaces that are difficult to access.
It is used to inspect engines, pipes, ventilation ducts, cavities in building walls, drainpipes and other hard-to-reach places. The camera probe is located at the end of a 1-metre flexible cable and is equipped with LED lighting, whilst the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The probe has an IP67 rating and can be submerged in water. The UT663B is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- 5″ HD colour display
- 8 LEDs with adjustable brightness
- Bidirectional photo rotation
Capture
- Battery: Li-ion
- High-temperature shutdown protection
- IP67-rated camera
- Flexible cable length: 1 m
Technical specifications:
- Display size: 5″ HD Colour
- Camera resolution: JPG 1920 x 10810 pixels, AVI 10810 pixels
- Basic functions: photo capture, video recording, playback, high temperature warning protection, image rotation, audio recording
- Standard storage: 32 GB TF (maximum 64 GB)
- rotation angle: 180° bidirectional
- Flexible cable length: 1 m
- Probe diameter: 8 mm
- Light sensor: 8 mm CMOS
- lens field of view (FOV): 70°
- Depth of field (DOF): 20 mm to 100 mm
- Illumination intensity adjustment: 4 levels + off
- Field of view illumination: 8 LEDs
- Lens pixels: 1000 K/3: probe protection
-7: / 3000 mAh battery
- battery life: 4 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- operating temperature: 0 °C to 45 °C
- humidity: < 90% RH
- Device dimensions: 1,673 mm
- x 1,673 mm weight: 690 g
Package contents:
- endoscopic camera
- detachable probe with lens
- 32GB TF card
- user manual
- standard quantity per box: 6 pcs
MANUFACTURER: UNI-
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT663B-2m 360° rotating industrial borescope.
The UNI-T UT663B-2m series industrial borescope is specially designed and manufactured to meet market demands for complex environments that are beyond the reach of the human eye. The camera is equipped with 180° bidirectional rotation, allowing it to navigate around blind spots and adjust angles, making it suitable for various narrow and curved spaces that are difficult to access.
It is used to inspect engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 1-metre flexible cable and is equipped with LED lighting, whilst the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The probe has an IP67 rating and can be submerged in water. The UT663B-2m is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- 5″ HD colour display
- 8 LEDs with adjustable brightness
- Two-way video
->- 180
->- 180° rotation Battery: Li-ion
- High-temperature shutdown protection
- IP67-rated camera
- Flexible cable length: 2 m
Technical specifications:
- Display size: 5″ HD Colour
- Camera resolution: JPG 1920 x 1080 pixels, basic AVI function x 1920 pixels: photo
- 1920 pixels capture, video recording, playback, high temperature warning protection, image rotation, audio recording
- Standard storage: 32 GB TF (maximum 64 GB)
- Rotation angle: 180° bidirectional
- Flexible cable length: 2 m
- probe diameter with lens: 8 mm
CMOS viewing angle
(FOV): 70°
- lens focus (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 levels + off
- Field of view illumination: 8 LEDs
- Lens pixels: 1000 K
- Probe protection: IP67
- Power supply: 30 V battery
- Battery life: 4 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Operating temperature: 0 °C to 45 °C
- Humidity: < 90% RH
- Device dimensions: 273 mm x 69 mm Product weight: 69 mm x 69 mm
- g
Package contents:
- endoscopic camera
- detachable probe with lens
- 32GB TF card
- user manual
- standard quantity per box: 6 pcs
MANUFACTURER: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT663B-3m 360° rotating industrial borescope.
The UNI-T UT663B-3m series industrial borescope is specially designed and manufactured to meet market demands for complex environments that are beyond the reach of the human eye. The camera is equipped with 180° bidirectional rotation, allowing it to navigate around blind spots and adjust angles, making it suitable for various narrow and curved spaces that are difficult to access.
It is used to inspect engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 1-metre flexible cable and is equipped with LED lighting, whilst the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The probe has an IP67 rating and can be submerged in water. The UT663B-3m is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- 5″ HD colour display
- 8 LEDs with adjustable brightness
- Two-way video
->- 180
->- 180° rotation Battery: Li-ion
- High-temperature shutdown protection
- IP67-rated camera
- Flexible cable length: 3 m
Technical specifications:
- Display size: 5″ HD Colour
- Camera resolution: JPG 1920 x 1080 pixels, basic AVI function 1920 pixels: 1920-pixel photo
- Capture, video recording, playback, high temperature warning protection, image rotation, audio recording
- standard storage 32 GB TF (maximum 64 GB)
- Rotation angle: 180° bidirectional
- flexible cable length: 3 m
- lens probe diameter: 8 mm
- light sensor
-
-
light sensor
- 70°
- lens focus (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 levels + off
- field of view illumination: 8 LEDs
- lens pixels: 1000 K
- Probe protection: IP67
- Power supply: 30.0 V / mAh:
- Battery life: 30.00 V 4 h
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- operating temperature: 0 °C to 45 °C
- Humidity: < 90% RH
- Device dimensions: 273 mm x 66 mm x 139 mm Product weight
Contents:
- endoscopic camera
- detachable probe with lens
- 32GB TF card
- user manual
- standard quantity per box: 6 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT665P portable industrial borescope with a single lens.
The UT665P series industrial endoscope is professionally designed and manufactured to meet market requirements for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 1-metre flexible cable and is equipped with LED lighting; the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT665P is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- Display: 4.3″
- 8 LEDs with adjustable brightness
- Camera battery: Li-Ion
--67° rotation
- Flexible cable length: 1 m
Technical specifications:
- Display size: 4.3″
- System language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation, contrast adjustment, flexible image conversion, brightness and zoom adjustment, black and white, screen brightness and zoom
Length: 1 m
- probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- Depth of field (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 LED brightness levels
- + field of view
- 8 LED pixels: 300 K
- Probe protection: IP67
- Power supply: 3.7 V / 2000 mAh battery
- Battery life: 6 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Operating temperature: >-50 °C
- Humidity:
90% RH
- device dimensions: 256 mm x 120 mm x 50 mm
- Product weight: 270 g
Package contents:
- UT665P endoscopic camera: 1 pc
- detachable probe with lens/mirror, mounting clip, 1 pc.
- user manual
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT665P-10m portable industrial borescope.
The UT665P-10m series industrial endoscope is professionally designed and manufactured to meet market demands for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 10-metre flexible cable and is equipped with LED lighting, whilst the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT665P-10m is an indispensable tool in the automotive and mechanical industries, repair shops, workshops or construction sites.
Product specifications:
- certification: CE, RoHS
- display: 4.3″
- 8 LEDs with adjustable brightness:
- battery indicator
- 7-way rotation
- Flexible cable length: 10 m
Technical specifications:
- display size: 4.3″
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation, contrast adjustment, zoom in/out via flexible cable, black and white, brightness and screen zoom
length: 10 m
- probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- lens focus (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 LED illumination levels: + 8 LED diode illumination levels
- Lens pixels: 300K
- Probe protection rating: IP67
- power supply: 3.7 V / 2000 mAh battery
- Battery life: 6 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Humidity: < 90% RH
- Device dimensions: 256 mm x 120 mm x 50 mm
- Product weight: 270 g
Package contents:
- UT665P-10m endoscopic camera: - 1 pc.
- hook, side mirror, magnet, fixed clamp
- user manual
- standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT665P-5m portable industrial borescope.
The UT665P-5m series industrial endoscope is professionally designed and manufactured to meet market demands for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 5-metre flexible cable and is equipped with LED lighting, whilst the flexible snake tube can be bent into the desired shape. The ergonomic handle design provides a good grip and is non-slip and shock-resistant. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT665P-5m is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- certification: CE, RoHS
- display: 4.3″
- 8 LEDs with adjustable brightness:
- battery indicator
- 7:
- rotation
- Flexible cable length: 5 m
Technical specifications:
- display size: 4.3″
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation, contrast adjustment, flexible image conversion, brightness, black and white, and screen zoom
Length: 5 m
- probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- Lens focus (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 LED brightness levels
- + field of view
- 8 LED pixels per lens: 300 K
- Probe protection: IP67
- Power supply: 3.7 V / 2000 mAh battery
- Battery life: 6 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Operating temperature: >-50 °C
- Humidity:
90% RH
- device dimensions: 256 mm x 120 mm x 50 mm
- Product weight: 270 g
Package contents:
- UT665P-5m endoscopic camera: 1 pc
- detachable probe, 1 pc, fixed mirror, 1 pc. clip
- user manual
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT667 portable industrial borescope with a single lens.
The UT667 series large-area industrial endoscope is professionally designed and manufactured to meet market requirements for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, cavities in building walls, drainage pipes and other hard-to-reach places. The camera probe is located at the end of a 1-metre flexible cable and is equipped with LED lighting; the flexible snake tube can be bent into the desired shape. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT667 is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- certification: CE, RoHS
- display: 4.3″
- 8 LEDs with adjustable brightness
- battery
IP67
IP66 rotation
- Flexible cable length: 1 m
Technical specifications:
- display size: 4.3″ IPS LCD
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation, black-and-white image conversion, 1 flexible image conversion and zoom
m
- Probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- Depth of field (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 levels + 8 LED illumination pixels
:- LED field of view
>- 8 pixels 300 K
- Probe protection: IP67
- Power supply: 3.7 V / 2000 mAh battery
- Battery life: 5 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Operating temperature: 0 °C to 4 °C
- 4 °C
- 90% RH
- device dimensions: 162 mm x 82 mm x 36 mm
- Product weight: 190 g
Package contents:
- UT667 endoscopic camera: 1 pc
- detachable probe with lens, 1 pc, clip attached
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT667-10m single-lens portable industrial borescope.
The UT667-10m series large-field-of-view industrial endoscope is professionally designed and manufactured to meet market requirements for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, cavities in building walls, drainage pipes and other hard-to-reach places. The camera probe is located at the end of a 10-metre flexible cable and is equipped with LED lighting; the flexible snake tube can be bent into the desired shape. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT667-10m is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- Display: 4.3″ IPS LCD
- 8 LEDs with adjustable brightness:
- Battery:
camera
- image rotation
- Flexible cable length: 10 m
Technical specifications:
- Display size: 4.3″
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: screen rotation and black cable conversion, flexible image length, white image conversion and
10 m
- Lens probe diameter: 8 mm
- Light sensor chip: CMOS
- lens field of view (FOV): 70°
- Depth of field (DOF): 20 mm to 100 mm
- light intensity adjustment: 4 levels + 8 illumination lenses
- LED illumination field: pixels: 300 K
- Probe protection: IP67
- power supply: 3.7 V / 2000 mAh battery
- battery life: 5 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- operating temperature:
- humidity
- °C:
90% RH
- device dimensions: 162 mm x 82 mm x 36 mm
- Product weight: 190 g
Package contents:
- UT667-10m endoscopic camera: 1 pc
- detachable probe, 1 magnet, fixed mirror, 1 clip
- user manual
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
UNI-T UT667-5m portable industrial borescope with a single lens.
The UT667-5m series large-area industrial endoscope is professionally designed and manufactured to meet market demands for complex environments that are inaccessible to the human eye. It is used for inspecting engines, pipes, ventilation ducts, building wall cavities, drain pipes and other hard-to-reach places. The camera probe is located at the end of a 5-metre flexible cable and is equipped with LED lighting; the flexible snake tube can be bent into the desired shape. The user-friendly interface allows for simple and clear operation and ensures easy communication. The probe has an IP67 rating and can be submerged in water. The UT667-5m is an indispensable tool in the automotive and mechanical industries, service stations, workshops or construction sites.
Product specifications:
- Certification: CE, RoHS
- Display: 4.3″ IPS LCD
- 8 LEDs with adjustable brightness:
Battery:--7 cells
- Image rotation
- Flexible cable length: 5 m
Technical specifications:
- Display size: 4.3″
- system language: English
- camera resolution: 1280 x 720 pixels
- Basic functions: black and white image conversion, black and white image conversion,
flexible cable length: 5 m
- probe diameter with lens: 8 mm
- light sensor chip: CMOS
- lens field of view (FOV): 70°
- Depth of field (DOF): 20 mm to 100 mm
- Light intensity adjustment: 4 LED brightness levels
- + LED field of view
- 8 off
> Lens pixels: 300 K
- Probe protection: IP67
- Power supply: 3.7 V / 2000 mAh battery
- Battery life: 5 hours
Operating conditions:
- Lens temperature: 0 °C to 80 °C
- Operating temperature: >-50 °C
- Humidity:
90% RH
- device dimensions: 162 mm x 82 mm x 36 mm
- Product weight: 190 g
Package contents:
- UT667-5m endoscopic camera: 1 pc
- detachable probe with lens/mirror, 1 pc, fixed mirror, mirror clip, 1 pc
- user manual
- Standard quantity per box: 20 pcs
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT673A is a portable tester for lead-acid car batteries, allowing you to analyse the condition of batteries with capacities ranging from 30 to 250 Ah without removing them. It is equipped with state-of-the-art technology that allows you to measure battery voltage, the car system’s charging currents, the battery’s internal resistance, starting currents, the battery’s remaining capacity as a percentage, and the battery’s remaining service life as a percentage. Before starting the test, you must select the battery type – standard lead-acid battery, flat AGM battery, spiral AGM battery, gel battery, EFB battery and standard battery – CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah. If the standard cannot be determined, the CCA standard is selected, for example 60Ah, cold cranking current 500A, and tested.
Product parameters:
- 12V lead-acid car battery tester for various models
- allows testing of 12V / 24V systems with vehicle charging resolution
- x1 64-pixel display
- Coloured LED indicating the test result
- Test mode settings: Battery test, Start-up test, Charge test, Results display, System settings, Details
- CE, FCC, RoHS certified
Technical parameters:
- For testing 12V lead-acid batteries: - Standard lead-acid batteries, standard GM batteries: battery, AGM spiral battery, GEL battery, EFB battery
- Measurement standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah
- Tested battery capacity: 3 to 250Ah
- For testing 12V/24V charging systems: yes, including alternator/12V testing for 2V/12V starting
- Systems: yes
- Power supply: from the battery under test
- Voltage display: 7.00V to 16.00V (battery test)
- Voltage display: 7.00V to 30.00V (start/charge test)
- high voltage protection: yes
- reverse polarity protection
- reverse polarity indication
- yes
- battery status display: yes
- battery life display: yes
- battery capacity display: yes
- battery internal resistance display: yes
- language selection: yes (Chinese/English)
- Operating temperature: -20 °C to +50 °C
- Net product dimensions: 2/6 x 2 x 2 g
- 142 mm
- Product colour: red and grey
Contents of individual pack:
- UT673A device: 1 pc
- Velcro strap: 1 pc
- user manual: 1 pc
MANUFACTURER
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT673PV MPPT solar meter can effectively identify any faults in solar panels by testing their peak power, peak voltage, peak current, open-circuit voltage and short-circuit current. Thanks to its large display and automatic measurement capability, this device conveniently displays all measurement results simultaneously. Its lightweight design allows for easy portability, which greatly enhances operational and maintenance efficiency. Applications: solar panel manufacturers, solar panel users, assembly companies, etc.
Product parameters:
- for the installation and maintenance of solar panels
- the large LCD display shows all basic test values
- no batteries required, powered by the solar panel
- portable and convenient
- easy to use
- MC test
- Easy-to-use cable
Technical parameters:
- maximum power test (Pmax) 5 W to 800 W ±(1.0% + 10)
- peak supply voltage (Vmp) 12 V to 60 V ±(1.5% + 5)
- Peak current at 1.5% (Imp) - A ± (1.0% + 5). 5)
- open-circuit voltage (Voc) 12 V to 60 V ±(1.5% + 5)
- Short-circuit current (Isc) 0 A to 35 A ±(1.5% + 5)
- LCD display (52 x 66 mm)
- Overvoltage connection protection/overvoltage protection/reverse polarity protection
protection
- Overheating protection
- Overvoltage protection
- Manual MPPT test
- Data logger
- power: no batteries required, power from solar panel
- dimensions: 143 × 74 × 25 mm
- colour: red + black
- Category: CAT, CE certification<br, c/6-0V RoHS
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty.
The UT675A is a portable tester for automotive lead-acid batteries, allowing you to analyse the condition of batteries with capacities ranging from 30 to 250Ah without removing them. It is equipped with state-of-the-art technology that allows you to measure battery voltage, the car system’s charging currents, the battery’s internal resistance, starting currents, the battery’s remaining capacity as a percentage, and the battery’s remaining service life as a percentage. Before starting the test, you must select the battery type – standard lead-acid battery, AGM flat battery, AGM spiral battery, gel battery, EFB battery and standard battery – CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah. If the standard cannot be determined, the CCA standard is selected, for example 60Ah, cold cranking current 500A, and tested.
Product parameters:
- 12V lead-acid car battery tester for various models
- allows testing of 12V to 24V charging systems with an LCD screen
- 128 x 64 pixels
- Test mode settings: battery test, start-up test, charge test, results display, results printout, system settings
- System time setting
- Built-in printer for printing values in real time
- Data transfer via USB interface
- CE, FCC, RoHS certification
:
- Technical test parameters for 12V lead-acid batteries: yes
- Battery types tested: standard lead-acid battery, AGM flat battery, AGM spiral battery, GEL battery, EFB battery
- Measurement standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah
- Battery capacity tested: 3 to 24V/25V-Ah for charging system testing: yes, including alternator diode test
- for testing 12V / 24V starting systems: yes
- System time setting: yes, (year, month, day, hour, minute)
- Power supply: from the battery under test
- Voltage display: 7.00 V to 16.00 V
- 0 V (battery test)
- 0 V to 30.00 V (start-up/charging test)
- high voltage protection: yes
- reverse polarity protection: yes
- Faulty contact information: yes
- battery status display: yes
- battery life display: yes
- Battery capacity display: yes
- Internal battery selection display: yes (English)
- Operating temperature: -20 °C to +50 °C
- Transfer of the last data set to a computer: yes, after downloading the software to the computer
- Net product weight: 413 g
- Product dimensions: 95 x 47 x 183 mm
- Product colour: red and grey
Contents of individual packaging
:
- UT675A device: 1 pc
- USB interface cable: 1 pc
- printing paper: 3 pcs
- Cloth bag: 1 pc
- User manual: 1
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT681 HDMI Cable Tester
This product comes with a 3-year warranty. Product specifications and features:
- tests HDMI/MINI-HDMI cables
- Fastline connection types: A to A, A to C and C to C
- checks for open circuits, short circuits and cross-short circuits via visible LED indicators
Visible cross-short indicators
- Can switch between scan and full display test modes
- single-button operation
- manual/automatic switch-off (after 10 minutes of inactivity)
- low battery indicator
- Power supplied by a built-in 9V battery
Technical/test parameters:/-
HDMI/MINI-HDMI
- scan test mode: LED1-LED19, LED_S
- Full display test mode: LED1-LED19, LED_S
- Power supply: 9V battery
- Storage temperature: -10 to 50 °C
- operating temperature: 0–40 °C
- Operating humidity: 0–40 °C
- Operating humidity: 10–90% RH
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT681C Cable Tester (RJ45, RJ11, BNC)
This product comes with a 3-year warranty. Product specifications and features:
- tests Ethernet cables and telephone lines
- equipped with an RJ45 interface for Ethernet cables and an RJ11 interface for testing unshielded telephone/Ethernet lines
- shielded test
- visible LED indicator
- automatically checks for open circuits, short circuits and cross-connections
- can switch between fast and slow test modes
- single-button operation
- manual/automatic shut-off (after 10 minutes of inactivity)
- low battery indicator
- powered by a 9V battery
9V parameters:
- tests RJ45, RJ11, BNC - you must use the RJ45 to BNC adapter
- fast speed test mode: LED1-LED8, LED_G
- slow speed test mode: LED1-LED8, LED_G
- power supply: 9V battery
- storage temperature: 5/10˚ storage temperature:
-- storage temperature: 5/10˚ 0-40 ˚C
- Operating humidity: 20–80% RH
- Storage humidity: 10–90% RH
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT681L Cable Tester (RJ45, RJ11)
This product comes with a 3-year warranty. Product specifications and features:
- tests Ethernet cables and telephone lines
- equipped with an RJ45 interface for Ethernet cables and an RJ11 interface for testing Ethernet/unshielded cables
Shielded test
- visible LED indication
- automatically checks for open circuits, short circuits and cross-connections
- Can switch between fast and slow test modes
- Single-button operation
- Manual/automatic shut-off (after 10 minutes of inactivity)
- low battery indicator
- powered by a 9V battery
9V parameters:
- tests RJ45 / RJ11
- fast speed test: LED1-LED8, LED_G
- slow speed test mode: LED1-LED8, LED_G
- power supply: 9V battery
- storage temperature: -10 to 50 °C; operating temperature
--4 °C Humidity: 20–80% RH
- Storage humidity: 10–90% RH
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT682 UTP Cable Tester (RJ45)
This product comes with a 3-year warranty. The UNI-T UT682 wire tracing system consists of a transmitter and a receiver. It features functions such as telephone wire tracing, network cable tracing (RJ45/UTP), cable tracing, network cable testing, etc., and offers fast and accurate measurement. The UT682 is an ideal tool for personnel involved in the installation and maintenance of low-voltage systems, such as communication cables and integrated circuits.
FEATURES:
Product name: Wire Tracker
Power supply: 9V battery (NOT included)
Signal transmission mode: multi-frequency pulse
Telephone line short circuit test
Open circuit polarity test
√
Audio signal test range: ≥1000m
Video line distance: ≥100m
Low battery indicator (transmitter): √
Telephone line monitoring function
A. Connect the telephone line plug to the transmitter’s RJ11 interface;
B. Set the transmitter’s function selector switch to the ‘TEST’ position. The ‘Status’ line tracing indicator will light up, indicating that the transmitter is operating correctly;
C. Hold down the receiver’s “Press to Test” button and search for the target cable with the receiver’s probe.
D. During testing, gently press the “Switch” button to toggle between single and dual audio test modes.
Network line tracing function
A: Connect the network line with a crystal head to the transmitter’s RJ45 interface;
B. Set the transmitter’s function selector switch to the “TEST” position; the “Status” line tracing indicator will flash, indicating that the transmitter is functioning correctly;
C. Hold down the receiver’s ‘Press to Test’ button and search for the target cable with the receiver’s probe.
D. During testing, gently press the “Switch” button to toggle between single and dual audio test modes.
Power cable line tracing function (the power cable must not be live)
A. Connect the transmitter to the metal cable using crocodile clip adapter cables;
B. Set the transmitter’s function selector switch to the ‘TEST’ position; the ‘Status’ line tracing indicator will flash, indicating that the transmitter is functioning correctly;
C. Hold down the receiver’s “Press to Test” button and search for the target cable with the receiver’s probe.
D. During testing, gently press the “Switch” button to toggle between single and dual audio test modes.
ACCESSORIES:
1 x UNI-T UT682 transmitter
1 x UNI-T UT682 receiver
1 x RJ11 adapter cable
1 x RJ11 adapter cable
1 x Croco45 adapter cable
1 x RJ11 adapter cable
1 x canvas bag
1 x user manual in English
