Search results for "uni-t"

This product comes with a 3-year warranty. The UT673A is a portable tester for lead-acid car batteries, allowing you to analyse the condition of batteries with capacities ranging from 30 to 250 Ah without removing them. It is equipped with state-of-the-art technology that allows you to measure battery voltage, the car system’s charging currents, the battery’s internal resistance, starting currents, the battery’s remaining capacity as a percentage, and the battery’s remaining service life as a percentage. Before starting the test, you must select the battery type – standard lead-acid battery, flat AGM battery, spiral AGM battery, gel battery, EFB battery and standard battery – CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah. If the standard cannot be determined, the CCA standard is selected, for example 60Ah, cold cranking current 500A, and tested. Product parameters: - 12V lead-acid car battery tester for various models - allows testing of 12V / 24V systems with vehicle charging resolution - x1 64-pixel display - Coloured LED indicating the test result - Test mode settings: Battery test, Start-up test, Charge test, Results display, System settings, Details - CE, FCC, RoHS certified Technical parameters: - For testing 12V lead-acid batteries: - Standard lead-acid batteries, standard GM batteries: battery, AGM spiral battery, GEL battery, EFB battery - Measurement standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, Ah - Tested battery capacity: 3 to 250Ah - For testing 12V/24V charging systems: yes, including alternator/12V testing for 2V/12V starting - Systems: yes - Power supply: from the battery under test - Voltage display: 7.00V to 16.00V (battery test) - Voltage display: 7.00V to 30.00V (start/charge test) - high voltage protection: yes - reverse polarity protection - reverse polarity indication - yes - battery status display: yes - battery life display: yes - battery capacity display: yes - battery internal resistance display: yes - language selection: yes (Chinese/English) - Operating temperature: -20 °C to +50 °C - Net product dimensions: 2/6 x 2 x 2 g - 142 mm - Product colour: red and grey Contents of individual pack: - UT673A device: 1 pc - Velcro strap: 1 pc - user manual: 1 pc MANUFACTURER

Read more less

UNI-T UT230B-EU Electricity Meter This product comes with a 3-year warranty. UNI-T UT230B-EU socket SPECIFICATIONSVoltage 100.0V–260.0V ±1%Operating current±16%A-16%Frequency 45Hz ±1%Power 0–3680 W ±1%Power factor 0–1.00 ±2%Energy consumption 0–9999 kWh ±1% SPECIFICATIONSUnit price of electricity 0.Wh–9900. Time 0 minutes–9999 daysCumulative charge 0–9999$CO2 display 0–9999 kgMax. power consumption 0.4WOverload indicator 16A GENERAL FEATURESPower: 3.0V button cell batteryWeight: 140gDimensions: 130x65x59mmAccessories: battery, manual

Read more less

UNI-T UTP3315TFL-II DC Power Supply This product comes with a 3-year warranty. The UTP3315TFL-II is a linear DC power supply with a conventional transformer. Maximum voltage 30V DC, max. current 5A DC. This type of power supply is an ideal tool for universities and technical colleges, electronics production lines, appliance repairers, DIY enthusiasts, etc. Two 4-digit LED displays for simultaneous display of voltage (red) and current (white), reverse polarity protection, short-circuit protection, overload protection. When the internal temperature of the transformer reaches 130 °C, the reversible thermal fuse cuts off the power supply to the transformer and automatically reconnects the power supply when the temperature drops. The device can be operated as a constant voltage source or as a constant current source. Coarse and fine voltage adjustment with a resolution of 10 mV, coarse and fine current limit adjustment with a resolution of 1 mA. The + and - terminals are galvanically isolated from the power supply housing and the earth conductor; if necessary, one pole can be connected to the earth terminal. The maximum ripple (noise) of the DC voltage is 2 mV rms and 3 mA rms. Product parameters: - number of digits on the LED display: 4 digits - two displays Technical parameters: - - V - output current range: 0–5 A - maximum output power: 150 W - number of digits on the red LED voltage display: 4 - number of digits on the white LED current display: 4 - load control mode: CV <0.01% + 5 mV - load control mode - Accuracy (25 °C ± 5 °C) Voltage display: ＜ 0.5% + 20 mV - Current display accuracy (25 ℃ ± 5 ℃): ＜ 0.5% + 10 mA - CV output control resolution: 10 mV (typical) output control resolution - 1 CCA (typical) (typical) - Ripple and noise: ≤2 mVrms, 3 mA rms - Product colour: white and grey - Weight: 4 kg - Dimensions: 105 x 165 x 249 mm - power supply: AC 110V / 230Hz ± 230Hz - detachable three-pin power cable - standard accessories: output cables - packaging: 1 unit - Standard quantity per box: 4 pcs

Read more less

This product comes with a 3-year warranty. The UT673PV MPPT solar meter can effectively identify any faults in solar panels by testing their peak power, peak voltage, peak current, open-circuit voltage and short-circuit current. Thanks to its large display and automatic measurement capability, this device conveniently displays all measurement results simultaneously. Its lightweight design allows for easy portability, which greatly enhances operational and maintenance efficiency. Applications: solar panel manufacturers, solar panel users, assembly companies, etc. Product parameters: - for the installation and maintenance of solar panels - the large LCD display shows all basic test values - no batteries required, powered by the solar panel - portable and convenient - easy to use - MC test - Easy-to-use cable Technical parameters: - maximum power test (Pmax) 5 W to 800 W ±(1.0% + 10) - peak supply voltage (Vmp) 12 V to 60 V ±(1.5% + 5) - Peak current at 1.5% (Imp) - A ± (1.0% + 5). 5) - open-circuit voltage (Voc) 12 V to 60 V ±(1.5% + 5) - Short-circuit current (Isc) 0 A to 35 A ±(1.5% + 5) - LCD display (52 x 66 mm) - Overvoltage connection protection/overvoltage protection/reverse polarity protection protection - Overheating protection - Overvoltage protection - Manual MPPT test - Data logger - power: no batteries required, power from solar panel - dimensions: 143 × 74 × 25 mm - colour: red + black - Category: CAT, CE certification<br, c/6-0V RoHS Manufacturer: UNI-TREND

Read more less

This product comes with a 3-year warranty. The UTD2202CEX+ oscilloscope is the highest-quality digital benchtop oscilloscope in the UTD2000CEX+ series. It is a multifunctional, high-performance, easy-to-use oscilloscope with excellent technical specifications, featuring two analogue input channels, offering a bandwidth of 200 MHz with a sampling rate of 1 GS/s. It is equipped with a seven-inch TFT colour display with a resolution of 800 x 480 pixels. The oscilloscope has an internal memory with a depth of 64 kpts and a CEX-II waveform capture rate of up to 20,000 wfms/s, and allows automatic measurement of up to 34 signals/mathematical parameters. The simple front panel with clearly marked functions for basic operations, scaling and positioning of individual channels allows users to apply the skills acquired from using traditional instruments, so that the oscilloscope can be used without the need to learn anything complicated and can be used for long periods without fatigue. Furthermore, the device can be easily set up by pressing the AUTO button. The oscilloscope supports USB storage, and thanks to the USB OTG function, you can save measured values to a USB flash drive. It also supports communication with a computer via USB plug and play. Software for connecting to a PC and updating the firmware can be downloaded from the manufacturer’s website: https://instruments.uni-trend.com/digital-oscilloscopes/947.html You can download the data sheet from the manufacturer’s website: http://unitrend.oss-cn-hongkong.aliyuncs.com/20220526/1653549897498061.pdf Product specifications: - bandwidth: 200MHz - number of inputs: 2 - 2 (1MΩ±2%)//(24pF±3pF) - compensated signal input: within the range 3Vpp/1kHz - Max. input voltage: 400 Vpk, max. transition 1000 Vpk - sampling rate: 1GS/s - base time range: 2 ns/div to 50 s/div - rise time: ≤1.7 ns - vertical axis: 1mV/div to 20V/div (1MV/div), each channel has a vertical resolution of 8 bits/>- DC gain accuracy: ±3% - saved recording length: 2 x 512k sample points - memory depth: one channel 64kpts, two channels 2 x 32kpts - Triggering: Edge, Pulse, Video, Slope, Alternating trigger. - Mathematical functions: AB, Ax, Ax, A+ A/B, FFT, Editable Advanced, Filter - Automatic measurement of signal parameters: Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre-shoot, Period, Freq, Rise, Fall, + Width, Du, Delay, Dy, D, D, D FallDelay, Phase, FRFR, FRFF, FFFR, FFFF, FRLF, FRLR, FFLR, FFLF - number of measurements: 5 simultaneous measurements - statistical measurement: mean, Max, Min, standard deviation, number of measurements - frequency counter: 6-bit - standard interface: USB-UX-Host, USB-Device: Pass/Fail) - on-screen software buttons - On-screen software keyboard for naming saved files - number of files stored in the oscilloscope memory/USB flash drive: 20/200 - Saving the current screen as a BMP file to a USB flash drive - Multilingual menu (including English, German, French, Portuguese, Spanish and Russian) Technical specifications: - display: 178 mm (7-inch) diagonal, 800x480 pixels x RGB, max. typical brightness 300 nits - calibration interval: 1 year - power supply: 100V–240V AC, 45 to 440Hz - power consumption: max. 100VA - operating ambient temperature: 0°C to +40°C - operating ambient humidity: <35°C: ≤90% RH, 35°C to 40°C: ≤60% RH - Operating altitude: max. 2000m - Storage temperature: -20°C to +40°C - dimensions (W x H x D): 306 x 138 x 124 mm - Weight: net 2.5 kg, gross 3 kg Contents of individual package: - 2002CEX/2002 pc - Probe: 2 x UT-P05 200MHz (with compensation and switchable divider 1x, 10x): - detachable three-wire power cable: 1 pc - UT-D14 USB cable: 1 pc - a quick installation guide with a link to the website / -> user instructions packaging: - standard box dimensions: 450 x 420 x 280 mm - number of items in the pack: 2 - box weight: 8kg Manufacturer: UNI-TREND -

Read more less

This product comes with a 3-year warranty. The UTD2102CEX+ oscilloscope is a high-performance, multifunctional desktop digital oscilloscope from the UTD2000CEX+ series, which is easy to operate, has excellent technical specifications, and features two analogue input channels, offering a bandwidth of 100 MHz/GS with a sampling rate of 1. It is equipped with a seven-inch TFT colour display with a resolution of 800 x 480 pixels. The oscilloscope has an internal memory with a depth of 64 kpts and a CEX-II waveform capture rate of up to 20,000 wfms/s, and allows automatic measurement of up to 34 signals/mathematical parameters. The simple front panel with clearly marked functions for basic operations, scaling and positioning of individual channels allows users to apply the skills acquired from using traditional instruments, so that the oscilloscope can be used without the need to learn anything complicated and can be used for long periods without fatigue. In addition, the device can be easily set up by pressing the AUTO button. The oscilloscope supports USB storage, and thanks to the USB OTG function, you can save measured values to a USB flash drive. It also supports communication with a computer via USB plug and play. The option to download software for connecting to a PC and updating the firmware is available on the manufacturer’s website: https://instruments.uni-trend.com/digital-oscilloscopes/947.html You can download the data sheet from the manufacturer’s website: http://unitrend.oss-cn-hongkong.aliyuncs.com/20220526/1653549897498061.pdf Product specifications: - bandwidth: 100MHz - number of input channels: 2: - (1MΩ±2%)//(24pF±3pF) - compensated signal input: within the range of 3Vpp/1kHz - max. input voltage: 400Vpk, max. transient 1000Vpk - sampling rate: 1 GS/s - base time range: 2 ns/div to 50 s/div - rise time: ≤ 3.5 ns - vertical axis: 1 mV/div to 20 V/div (1 mV/div), each channel has a separate vertical resolution: - DC gain accuracy: ±3% - saved recording length: 2 x 512k sample points - memory depth: one channel 64kpts, two channels 2 x 32kpts - Triggering: Edge, Pulse, Video, Slope, Alternating waveform A-B, A+- mathematical triggering. AxB, A/B, FFT, Editable Advanced, Filter - automatic measurement of signal parameters: Max, Min, High, Low, Middle, Pk-Pk, Amplitude, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre-shoot, Period, Freq, Rise, Fall - Width, +, - Duty, RiseDelay, FallDelay, Phase, FRFR, FRFF, FFFR, FFFF, FRLF, FRLR, FFLR, FFLF - number of measurements: 5 simultaneous measurements - statistical measurement: mean, Max, Min, standard deviation, number of measurements - frequency counter: 6-bit, USB-UX interface, standard LAN: USB-UX, (Trig Out, Pass/Fail) - on-screen software buttons - on-screen software keyboard for naming saved files - number of files stored in the oscilloscope memory/USB flash drive: 20/200 - Saving the current screen as a BMP file to a USB flash drive - multilingual menu in Spanish, German, English, German, English, German, others (Russian) Technical specifications: - display: TFT, diagonal 178 mm (7 inches), 800 x 480 pixels x RGB, max. brightness typically 300 nits - calibration interval: 1 year - power supply: 100V–240V AC, 45 to 440Hz - power consumption: max. 100VA - operating ambient temperature: 0°C to +40°C - operating ambient humidity: <35°C: ≤90% RH, 35°C to 40°C: ≤60% RH - Operating altitude: max. 2000m - Storage temperature: -20°C to +40°C - dimensions (W x H x D): 306 x 138 x 124 mm - Weight: net 2.5 kg, gross 3 kg Contents of individual package: U>+2 oscilloscope: 1 pc - 100MHz UT-P04 probe (with compensation and switchable 1x, 10x divider): 2 pcs - Detachable three-core power cable: 1 pc - UT-D14 USB cable: 1 pc - A quick installation guide with a link to the manufacturer’s instructions – usage Wholesale packaging: - Standard carton dimensions: 450 x 420 x 280 mm - Number of items per pack: 2 pcs - Carton weight: 8 kg Manufacturer: UNI>-TREND

Read more less

UNI-T UT210C Clamp Meter This product comes with a 3-year warranty. UNI-T UT210C Clamp Meter TECHNICAL SPECIFICATIONS AC Current (A) 2A/20A/200A 20A+/200A ±/200A ±/200A Voltage (V) 2V/20V/200V/600V ±(1.0%+3) DC Voltage (V) 200mV/2V/20V/200V/600V ±(0.7%+3) Resistance (Ω) 200Ω/2kΩ/M20kΩ/20kΩ/M200Ω/20kΩ ±(1.0%+2) Capacitance (F) 20nF/200nF/2μF /20μF/200μF/2mF/20mF ±(4%+5) Temperature (℃) -40~1000℃) ±(1℉/+3) Temperature -40~1832℉ ±(1.5%+5) FEATURES Display count 　 2000 Auto range 　 √ Jaw capacity 　 17mm True RMS 　/>V 　/>√ √ A. NCV 　 √ Auto shut-off: Approx. 15 minutes √ Continuity buzzer 　 √ Low battery indication ≤2.5V √ Data hold 　 √ MAX mode/√　/√ Relative √ LCD backlight 　 √ Input protection 　 √ Input impedance for DCV ≥10MΩ √ GENERAL SPECIFICATIONS Power supply: 2 x 1.5V AAA batteries Net product dimensions LCD 329.3mm> Weight 170 g Product dimensions 175 mm x 60 mm x 33.5 mm ACCESSORIES Battery, test lead, contact-point temperature probe MANUFACTURER UNI-TREND

Read more less

UNI-T UT681C Cable Tester (RJ45, RJ11, BNC) This product comes with a 3-year warranty. Product specifications and features: - tests Ethernet cables and telephone lines - equipped with an RJ45 interface for Ethernet cables and an RJ11 interface for testing unshielded telephone/Ethernet lines - shielded test - visible LED indicator - automatically checks for open circuits, short circuits and cross-connections - can switch between fast and slow test modes - single-button operation - manual/automatic shut-off (after 10 minutes of inactivity) - low battery indicator - powered by a 9V battery 9V parameters: - tests RJ45, RJ11, BNC - you must use the RJ45 to BNC adapter - fast speed test mode: LED1-LED8, LED_G - slow speed test mode: LED1-LED8, LED_G - power supply: 9V battery - storage temperature: 5/10˚ storage temperature: -- storage temperature: 5/10˚ 0-40 ˚C - Operating humidity: 20–80% RH - Storage humidity: 10–90% RH

Read more less

UNI-T C02A alligator clip set – red + black UNI-T UT-C02A Alligator clip Technical specifications: - length: 80 mm- max. opening: 36 mm- insulated with the option to connect to a standard banana plug- measurement category: CAT III 1000V / CAT IV 600V 10A- packaging: 1 pair

Read more less

The Micro Lens UT-Z002 is a macro lens designed for use with UNI-T UTi260B and UTi720A thermal imaging cameras. It is a perfect auxiliary adapter for thermal cameras that can detect tiny electrical components that are overheating and helps engineers complete circuit load and temperature analysis, quickly identifying fault points. The macro lens attaches easily to the thermal camera. It can be easily removed when you wish to use the thermal camera without the macro lens.

Read more less

UNI-T 200MHz Oscilloscope Test Probe Replacement probe for UNI-T oscilloscopes - passive probe (1:1 / 10:1) - bandwidth: 200 MHz - input impedance: 1x 1MΩ ±2% / 10x 10MΩ ±10% / input capacitance: 10x 10:1 70pF ~ 120pF / 10x 14pF ~ 18pF - compensation range: 8 pF ~ 35 pF - operating voltage: 1x 300 Vp-p, 10x 600 Vp-p

Read more less

UNI-T UT161B Multimeter This product comes with a 3-year warranty. The UT161 series of multimeters is a range of extremely reliable, safe, durable and accurate multimeters that are CE-certified and suitable for the European market. The displays on these multimeters are backlit LCDs (dark digits on a light background) with a resolution of ±6000 (for the UT161B and UT161D) and ±22000 for the UT161E. The displays have a refresh rate of 2–3 times per second and also feature an analogue bar graph with 31 segments (UT161B and UT161D) or 41 segments (UT161E). The multimeters measure AC and DC voltages up to 1000V and are equipped with an audible and visual warning when maximum voltage/current or temperature values are reached. They allow for non-contact detection of live AC wires. The package includes a USB cable with an opto-electronic converter for data transfer to a PC. The power supply consists of four AAA (R03) batteries, and the device switches off automatically after 15 minutes of inactivity (this function can be temporarily disabled). The current inputs are protected by tubular fuses, and the fuses can be tested without opening the device. UT161B True RMS 1000 V digital multimeter. Product specifications: - fully complies with IEC/EN61010-1, and features double insulation classified as CAT/III 1000V – indoor electrical installation including three-phase distribution - Classified as CAT IV 600V – outdoor electrical installations (fuse boxes, start of indoor installations) - HTN-type LCD display with a maximum reading of ± 6000 - refresh rate for most measurements of 3 times per second - Automatic or manual setting ranges - automatic polarity indication - AC voltage measurement ranges: 60>-0V AC Ranges: 600 μA / 10 A - DC voltage measurement ranges: 60 mV / 1000 V - DC current measurement ranges: 600 μA / 10 A - Resistance measurement ranges: 600 MΩ Capacitance: 600 MΩ / 60 MΩ–60 MΩ nF / 66 mF - Frequency measurement range: 10 Hz / 10.00 MHz - Duty cycle measurement range: 0.1% to 99.9% - Measurement of silicon diode transitions - Line continuity measurement - Non-contact high-voltage measurement TRV detection – accuracy NC RMS voltage values, voltages and currents - relative measurement mode - MAX / MIN mode - Overrange warning: OL - USB cable for transferring measured values to a PC - Input protection against overvoltage exceeding 1000V - μA and mA input current protection with m0 V 6100 ø 6100 V 32mm CE fast-acting fuse - Input current protection 10A via FF11A / 1000V fast-acting fuse ø10 x 38mm CE - Input impedance in the mV range approx. 1GΩ, in other voltage ranges 10MΩ, - testing of diodes and semiconductor junctions with voltage from 0 to 3V, test current 1.2mA - powered by 4 x 1.5V AAA R03 batteries - low battery indicator - automatic switch-off after 15 minutes of Bluetooth data transfer - optional adapter for PC to PC - measurement possible in electromagnetic fields with an intensity of 1 V/m with an additional error of 5% Technical parameters: (accuracy is defined at a temperature of 23 °C ± 5 °C and relative humidity less than or equal to 75%) - DC voltage measurement (input range is approximately 1MV, 1MΩ 0x0x.) for other ranges): (range / resolution / accuracy) 60.00 mV / 0.01 mV / ± (0.8% + 5) 600.0 mV / 0.1 mV / ± (0.8 % + 3) 6,000 V / 5 / 0.01 V / ± 0.1 mV / ± (0.8 % + 3) 60.00 V / 0.01 V / ± (0.5 % + 3) 600.0 V / 0.1 V / ± (0.5 % + 3) 1,000 V / 1 V / ± (1.0 % + 3) - (in AC input voltage measurement / Ω) range / resolution / accuracy in the range from 40 Hz to 500 Hz) 60.00 mV / 0.01 mV / ± (1.2 % + 5) 600.0 mV / 0.1 mV / ± (1.2 % + 5) 6.00 ± 0 V / 0.0 ± 0 V / ± 0 V 60.00 V / 0.01 V / ± (1.0 % + 3) 600.0 V / 0.1 V / ± (1.0 % + 3) 1000 V / 1 V / ± (1.2 % + 5) Displays the actual current value/ (range / resolution / accuracy) 600.0 μA / 0.1 μA / ± (1.0 % + 2) 6000 μA / 1 μA / ± (1.0 % + 2) 60.00 mA / 10 μA / ± 0.0 μA / ± 0.0 μA / ± (1.0 % + 2) mA / 0.1 mA / ± (1.0 % + 3) 6,000 A / 1 mA / ± (1.2 % + 5) 10,000 A / 10 mA / ± (1.2 % + 5) - AC current measurement resolution in the range H / z / z / accuracy: 500 Hz) 600.0 μA / 0.1 μA / ± (1.2 % + 5) 6000 μA / 1 μA / ± (1.2% + 5) 60.00 mA / 10 μA / 10 μA / ± 5.0 %, ± (1.0 % + 5) mA / ± (1.5 % + 5) 6,000 A / 1 mA / ± (2.0 % + 5) 10 A / 10 mA / ± (2.0 % + 5) Displays the true RMS value - - Resistance measurement range: /> resolution accuracy 600.0 Ω / 0.1 Ω / ± (1.2 % + 2) 6,000 kΩ / 1 Ω / ± (1.0 % + 2) 60.00 kΩ / 10 Ω / ± (1.0 % + 2) 600.0 % + 2 Ω / 600.0 % + 2) 600.00 kΩ / 10 Ω / ± (1.0 % + 2) 600.0 % + 2) 6,000 MΩ / 1 kΩ / ± (1.2 % + 2) 60.00 MΩ / 10 kΩ / ± (2.0 % + 5) - Capacitance measurement: (range / resolution / accuracy) nF / 3.0 % / ± 0.0 % 5) 600.0 nF / 100 pF / ± (3.0 % + 5) 6,000 μF / 1 nF / ± (3.0% + 5) 60.00 μF / 10 nF / ± (3.0% + 5) / ± (3.0% + 5) (3.0% + 5) 6,000 mF / 1 μF / ± (10 % + 5) 60.00 mF / 10 μF / ± (10 % + 5) - Frequency measurement: (range / resolution / accuracy 10 MHz) 10 MHz 0.01 Hz to 0.01 MHz / ± 0.1% + 4 - Duty cycle measurement: 0.1% to 99.9% / 0.1% / ± (2.0% + 5) - Measurement of semiconductor and semiconductor measurement value 0.12 to 2 V and the green LED is lit: the diode is OK, the measured value is less than 0.12 V and the red LED is lit: the diode may be damaged the normal voltage drop across the silicon junction is 0.500 to 0.800 mV voltage resolution during this measurement. continuity measurement: when the line resistance is ≥70 Ω, an open circuit is indicated, the buzzer does not beep and the red indicator light is on when the line resistance is ≤50 Ω, a continuous circuit is indicated, the buzzer emits a continuous beep and the green indicator light is on This resolution for overload protection 10:00V: 0.1 Ω General specifications: - operating temperature: 0 °C - 40 °C (32 °F - 104 °F) - Relative humidity: ≤75% at 0 °C – 30 °C; ≤50% at 30 °C – 40 °C - Storage temperature: -10°C – 50°C (14°F – 122°F) - Operating altitude: ≤2000 m - Electromagnetic compatibility: complies with EN61326-1: 2006 - dimensions: 186 mm × 89 mm × 49 mm - Weight: 400 g - the device complies with the following standards: cETLus, CAT III 1000V, CAT IV 600V, double insulation, overvoltage protection for voltages greater than 102>1000V 1000V; EN 61326-2-2: 2013 EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012 Compliant with UL STD: 61010-1, 61010-2-030 Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033 Package contents: - UT161B multimeter with storage case - Gold-plated measurement leads CAT600/1 CAT III/1000 CATV-III USB cable for data transfer to PC - F1 fuse: 6 x 32 mm FF 600mA H 1000 V (ø6 x 32mm) CE - in the device - Fuse F2: 6 x 25 mm FF 11A H 1000 V (ø10 x 38 mm) CE -- in the R40 AAA device -- 1.5 V batteries - manual in Czech, Slovak, English Wholesale packaging: - standard quantity per box: 20 pcs - standard box dimensions: 480 mm x 370 mm x 325 mm - total box weight: 17.8 kg - Manufacturer - UNI-TREND -

Read more less