10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The VE.Direct port can be connected to:
A computer (VE.Direct to USB cable required)
Apple and Android smartphones, tablets, MacBooks and other devices (VE.Direct Bluetooth required)
Fully configurable:
Low battery voltage alarm triggers and reset levels
Battery voltage cut-off and battery restart levels
Dynamic disconnection: load-dependent cut-off level
Output voltage: 210–245 V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO sensitivity level
Monitoring:
Input and output voltage
Charging and alarms
Phoenix inverters are part of a range designed for high-quality performance, based on superior photovoltaic technology – SinusMAX. This technology allows for start-up at full load.
Superior technology – SinusMAX
The Phoenix range of inverters is designed for professional use and is suitable for a wide range of applications. The design focuses on optimum efficiency, without compromising on performance.
Key features:
HF hybrid technology: a compact, reliable product capable of supplying power to any type of load.
Full-load start-up: Phoenix inverters are ideal for powering demanding loads.
VE.Direct communication port: allows connection to computers, smartphones, tablets and other devices.
Proven reliability: thanks to the toroidal transformer, Phoenix inverters offer protection against short circuits, overheating and overloads.
ECO mode: in this mode, the inverter enters standby when the load drops below a preset value, saving energy.
Remote on/off control: a remote control can be connected to a two-pin connector, available on all models.
Automatic transfer switch: recommended for low-power models, the Filax device ensures a very short transfer time, so that electronic equipment will continue to operate without interruption.
Technical specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 2.4 kg
Power output at 25°C: 250VA
Peak power: 400W
Output voltage: 230VAC ± 3%, frequency 50Hz/60Hz
Input voltage: 36.8 - 62.0V
Maximum efficiency: 88%
No-load power: 7.9W
Operating temperature range: -40°C to +65°C
Maximum humidity: 95%
Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The VE.Direct port can be connected to:
A computer (VE.Direct to USB cable required)
Apple and Android smartphones, tablets, MacBooks and other devices
(VE.Direct Dual Bluetooth required)
Fully configurable:
Low battery voltage alarm triggers and reset levels
Battery voltage cut-off and battery restart levels
Dynamic disconnection: load-dependent cut-off level
Output voltage 210–245 V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO sensitivity level
Monitoring:
Input and output voltage
Charging and alarms
Phoenix inverters are part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX – featuring the unique capability of starting at maximum load.
Superior technology – SinusMAX
The Phoenix range of inverters, designed for photovoltaic panel systems, is created for professional use and is suitable for a wide range of applications.
The design focuses on optimal efficiency without compromising on performance, delivering a high-quality sinusoidal output.
Using HF hybrid technology, Phoenix offers a product:
High quality
Compact in size
Lightweight
Highly reliable
Capable of supplying power for any type of load.
Start-up at full load – A unique feature of SinusMAX technology.
Wide range of applications
Phoenix inverters are recommended for powering demanding loads. They can be integrated into stand-alone photovoltaic kits – independent photovoltaic systems.
VE.Direct communication port
This can be connected to computers, smartphones (Apple, Android), tablets, MacBooks and other compatible devices.
Proven reliability
The toroidal transformer design has proven its long-term reliability.
Phoenix inverters offer protection against:
Short circuits
Overload
Overheating
High ambient temperatures
ECO mode
In ECO mode, the inverter goes into standby when the load drops below a preset level.
After entering standby mode, it activates for a short period (2.5 seconds, factory setting). If the load exceeds the preset level, the inverter remains on.
Remote control on/off
Can be connected to a two-pin connector, available on all Phoenix models.
Automatic transfer switch
For low-power models, we recommend using the Filax automatic transfer switch.
Filax has a very short transfer time (under 20 milliseconds), allowing computers or electronic equipment to operate without interruption.
Technical specifications:
Dimensions: 117 x 232 x 327 mm
Weight: 7.4 kg
AC power output at 25°C: 1200 VA
Power output at 25°C / 40°C: 1000 / 850 W
Peak power: 2200 W
AC output voltage / frequency: 110 VAC or 230 VAC +/- 3%, 50 Hz or 60 Hz +/- 0.1%
Input voltage range: 36.8 - 62.0 V
Low battery voltage alarm: 43.6 V
Battery power cut-off: 37.2 V
Low battery voltage (self-regeneration): 56 V
Maximum efficiency: 92%
Zero-load power: 10 W
Photovoltaic panel system inverter protection: IP21 / a - f
Operating temperature range: -40 to +65°C (fan-cooled)
Maximum humidity (non-condensing): 95%
Standards: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX solar photovoltaic technology, and feature the unique ability to start up at full load.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage: Integrated functions for low voltage management.
Disconnection and restart: Configurable levels for low battery voltage.
Dynamic disconnection: Adjustment of the disconnection level according to load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode:
Automatic start/stop.
Level sensor for ECO mode.
Alarm relay.
Monitoring:
Monitoring of input and output voltage.
Load and alarm monitoring.
VE.Direct communication port:
Allows connection to a computer (VE.Direct to USB interface cable required) for configuration and parameter monitoring.
Proven reliability:
Complex topology: H-bridge toroidal transformer, demonstrating reliability over the years.
The inverters are short-circuit resistant and protected against overheating caused by overload or high ambient temperatures.
ECO mode:
In ECO mode, the inverter switches to standby when the load falls below a certain preset value. In standby, the inverter starts up every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter remains on.
Technical specifications:
Dimensions: 485 x 219 x 125 mm
Weight: 13 kg
AC power output at 25°C: 2000 VA
Power output at 25°C / 40°C: 1600 / 1450 W
Peak power: 4000 W
AC output voltage / frequency: 230 VAC ± 2% 50 Hz or 60 Hz ± 0.1%
Input voltage range: 37.2–68 V
Maximum efficiency: 94%
No-load power: 11 W
Photovoltaic panel system protection: A - G
Operating temperature range: -40 °C to +50 °C (fan-cooled)
Humidity (non-condensing): maximum 95%
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters with SinusMAX Technology – Performance and Reliability for Professional Applications
VE.Direct Port The VE.Direct port allows Phoenix inverters to be connected to a wide range of devices:
Computers ( VE.Direct to USB cable required)
Apple and Android smartphones, tablets, MacBooks and other devices ( VE.Direct Bluetooth adapter required)
Full configuration and monitoring Inverters can be configured to optimise performance:
Setting low battery voltage alarms and reset levels
Dynamic battery disconnection, depending on load
Output voltage adjustment between 210V and 245V
Adjustable operating frequency: 50Hz or 60Hz
Enabling/disabling and adjusting the sensitivity of ECO mode
Real-time monitoring:
Input and output voltage
Charging and active alarms
Superior technology – SinusMAX
Phoenix inverters are equipped with SinusMAX technology, optimised for starting at full load. Their design focuses on delivering a high-quality sinusoidal output without compromising efficiency or reliability. Thanks to HF hybrid technology, these inverters are compact, lightweight and ideal for powering demanding loads.
Reliability and comprehensive protection
Phoenix inverters feature comprehensive protection against short circuits, overloads and overheating. Using a toroidal transformer, these inverters have proven their reliability over time, making them the perfect choice for powering sensitive devices such as computers, power tools and LED or halogen lighting.
ECO Mode
In ECO Mode, the inverter enters standby mode when the load drops below a preset level, saving energy. Once activated, the inverter periodically checks whether the load exceeds the set threshold, remaining in operation only when necessary.
On/Off remote control and automatic transfer switch
For low-power models, we recommend using the Filax automatic transfer switch, which has an extremely fast transfer time (under 20 milliseconds). This ensures a seamless transition between AC power sources, maintaining continuous operation of sensitive devices.
Technical specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 2.4 kg
Rated power at 25°C: 250VA
Power at 25°C/40°C: 200W / 175W
Peak power: 400W
Output voltage/frequency: 230VAC ±3%, 50Hz or 60Hz ±0.1%
Input voltage: 18.4V - 34V
Low battery voltage alarm: 21.8V
Battery cut-off voltage: 18.6V
Battery regeneration voltage: 28V
Maximum efficiency: 88%
No-load power: 5.2W
Operating temperature range: -40°C to +65°C (with fan)
Maximum humidity: 95% (non-condensing)
Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters with SinusMAX Technology – Superior Performance and Reliability
VE.Direct Port
The VE.Direct port allows inverters to be connected to various devices, providing easy access for configuration and monitoring:
Computers (requires VE.Direct to USB cable)
Smartphones (Apple, Android), tablets, MacBooks and other devices ( VE.Direct Dual Bluetooth adapter required)
Fully configurable
Setting alarms for low battery voltage and reset levels
Adjustment of battery cut-off and restart levels
Dynamic load-dependent disconnection
Adjustable output voltage: 210–245V
Selectable frequency: 50Hz or 60Hz
ECO mode: on/off and adjustable sensitivity
Real-time monitoring
Input and output voltage
Charging and alarms
SinusMAX Technology – Optimised Efficiency and Performance
Phoenix inverters are equipped with SinusMAX technology, designed to handle demanding loads and start-up at full load. Using hybrid HF technology, these inverters offer a perfect balance between performance and efficiency, without compromising reliability.
Proven reliability
Using a toroidal transformer, Phoenix inverters offer protection against short circuits, overheating and overloading, making them ideal for sensitive devices such as computers, LED lighting or power tools.
ECO Mode – Energy Efficiency
In ECO Mode, the inverter automatically enters standby when the load drops below a preset value. The inverter will restart automatically when the load exceeds this threshold, thereby saving energy.
On/Off Remote Control
A two-pin connector allows connection of a remote control for remote on/off operation.
Filax Automatic Transfer Switch
Recommended for low-power models, this switch offers a transfer time of less than 20 milliseconds, maintaining the continuous operation of electronic equipment without interruption.
Technical Specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 3 kg
Rated power at 25°C: 375VA
Power at 25°C / 40°C: 300W / 260W
Peak power: 700W
Output voltage / frequency: 230VAC ±3%, 50Hz or 60Hz ±0.1%
Input voltage: 18.4V – 34V
Low battery voltage alarm: 21.8V
Battery cut-off voltage: 18.6V
Battery regeneration voltage: 28V
Maximum efficiency: 89%
No-load power: 6.1W
Protections: Short-circuit, overcharge and overheating protection
Operating temperature: -40°C to +65°C (with fan)
Maximum humidity: 95% (non-condensing)
Standards: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN 55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters – SinusMAX Technology
Phoenix inverters form part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX. These inverters are distinguished by their unique full-load start-up feature.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage
Low battery voltagecut-off and restart levels.
Dynamic disconnection: disconnection level depending on load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode: start/stop and level sensor for ECO mode.
Alarm relay.
Monitoring:
Input and output voltage
Load
Alarms
VE.Direct communication port
The VE.Direct port allows connection to a computer (VE.Direct to USB interface cable required) for configuration and monitoring of parameters.
Proven reliability
The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and protected against overheating caused by overload or high ambient temperatures.
ECO mode
In ECO mode, the inverter switches to standby mode when the load falls below a preset value. In standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on.
Technical specifications:
Dimensions: 485 x 219 x 125 mm
Weight: 12 kg
AC power output at 25°C: 1600 VA
Power output at 25°C / 40°C: 1300 / 1200 W
Peak power: 3000 W
AC output voltage / frequency: 230 VAC +/- 2%, 50 Hz +/- 0.1%
Input voltage range: 18.6 - 34 V
Maximum efficiency: 94%
No-load power: 9 W
Photovoltaic panel system inverter protection: a - g
Operating temperature range: -40 to +50 °C (fan-cooled)
Humidity (non-condensing): maximum 95%
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters – SinusMAX Technology
Phoenix inverters form part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX. These inverters are distinguished by their unique full-load start-up feature.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage
Low battery voltagecut-off and restart levels.
Dynamic disconnection: disconnection level depending on load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode: start/stop and level sensor for ECO mode.
Alarm relay.
Monitoring:
Input and output voltage
Load
Alarms
VE.Direct communication port
The VE.Direct port allows connection to a computer (VE.Direct to USB interface cable required) for configuration and monitoring of parameters.
Proven reliability
The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and protected against overheating caused by overload or high ambient temperatures.
ECO mode
In ECO mode, the inverter switches to standby mode when the load falls below a preset value. In standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on.
Technical specifications:
Dimensions: 485 x 219 x 125 mm
Weight: 13 kg
AC power output at 25°C: 2000 VA
Power output at 25°C / 40°C: 1600 / 1450 W
Peak power: 4000 W
AC output voltage / frequency: 230 VAC +/- 2%, 50 Hz +/- 0.1%
Input voltage range: 18.6 - 34 V
Maximum efficiency: 94%
No-load power: 9 W
Photovoltaic panel system inverter protection: a - g
Operating temperature range: -40 to +50 °C (fan-cooled)
Humidity (non-condensing): maximum 95%
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters – SinusMAX Technology
Phoenix inverters form part of a range designed for high-quality performance, based on superior solar photovoltaic technology – SinusMAX. These inverters are distinguished by their unique full-load start-up feature.
Key features:
Built-in Bluetooth: Fully configurable via a tablet or smartphone.
Low battery voltage
Low battery voltagecut-off and restart levels.
Dynamic disconnection: disconnection level depending on load.
Output voltage: 210–245 V.
Frequency: 50 Hz or 60 Hz.
ECO mode: start/stop and level sensor for ECO mode.
Alarm relay.
Monitoring:
Input and output voltage
Load
Alarms
VE.Direct communication port
The VE.Direct port allows connection to a computer (VE.Direct to USB interface cable required) for configuration and monitoring of parameters.
Proven reliability
The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and protected against overheating caused by overload or high ambient temperatures.
ECO mode
In ECO mode, the inverter switches to standby mode when the load falls below a preset value. In standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on.
Technical specifications:
Dimensions: 485 x 285 x 150 mm
Weight: 19 kg
AC power output at 25°C: 3000 VA
Power output at 25°C / 40°C: 2400 / 2200 W
Peak power: 6000 W
AC output voltage / frequency: 230 VAC +/- 2%, 50 Hz +/- 0.1%
Input voltage range: 18.6 - 34 V
Maximum efficiency: 94%
No-load power: 13 W
Photovoltaic panel system inverter protection: a - g
Operating temperature range: -40 to +50 °C (fan-cooled)
Humidity (non-condensing): maximum 95%
Standards: EN 60335-1 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
VE.Direct port: The VE.Direct port allows connection to:
A computer (requires a VE.Direct to USB cable)
Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth module with Dual Bluetooth)
Available settings:
Alarms for low battery voltage and reset levels
Battery cut-off and restart voltage
Dynamic disconnection: load-dependent adjustment
Output voltage: 210V – 245V
Frequency: 50Hz or 60Hz
ECO mode: on/off and adjustable sensitivity level
Parameter monitoring: input and output voltage, charge level and alarms
Superior SinusMAX technology: Phoenix inverters are designed for professional use, based on innovative SinusMAX technology. This technology allows for start-up at full load, delivering high performance without compromising on efficiency. Utilising HF hybrid technology, these inverters are compact, lightweight, extremely reliable and capable of handling any type of load.
Reliability and performance: The toroidal transformer design has proven its reliability over the years. Phoenix inverters offer protection against short circuits, overloads, overheating and high ambient temperatures. Starting at full load is a unique feature, making these inverters ideal for powering sensitive equipment such as computers, LEDs, halogen lamps or low-power electrical tools.
ECO Mode: In ECO Mode, the inverter enters standby when the load drops below a preset threshold. In standby mode, it will switch on periodically to check the load (the default setting is 2.5 seconds). If the load exceeds the preset threshold, the inverter remains switched on.
Remote on/off control: All models allow the connection of a remote control to switch the inverter on/off via a two-pin connector.
Automatic transfer switch (Filax): For low-power models, we recommend using the Filax automatic transfer switch, which offers an extremely short transfer time (under 20 milliseconds), ensuring the continuous operation of electronic equipment.
Technical specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 2.4 kg
Rated power (at 25°C): 250VA
Power at 25°C/40°C: 200W / 175W
Peak power: 400W
Output voltage: 230VAC ± 3%, 50Hz or 60Hz ± 0.1%
Input voltage: 9.2V – 17V
Low voltage alarm: 10.9V
Battery cut-off protection: 9.3V
Low battery voltage recovery: 14.0V
Maximum efficiency: 87%
No-load power consumption: 4.2W
Protections: short circuit, overcurrent, overtemperature, overheating
Operating temperature: -40°C to +65°C (with ventilation)
Maximum humidity (non-condensing): 95%
Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
VE.Direct communication port:
Compatible with:
Computers (requires VE.Direct to USB cable)
Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Dual module)
Fully configurable features:
Alarm triggers for low battery voltage and reset levels
Setting battery cut-off and restart levels
Dynamic disconnection: load-dependent cut-off adjustment
Output voltage adjustable between 210V and 245V
Selectable frequency: 50 Hz or 60 Hz
ECO mode: enable/disable and sensitivity adjustment
Monitoring of input and output voltage, load level and alarms
Superior SinusMAX technology: Phoenix inverters are designed for high-quality performance, utilising advanced SinusMAX technology. This offers a unique full-load start-up feature, enabling the power supply of devices requiring high current at start-up, without compromising efficiency or performance.
Compact design and high reliability: Thanks to HF hybrid technology, Phoenix inverters are compact, lightweight and extremely reliable, capable of handling a wide range of loads, from sensitive equipment to power tools. The toroidal transformer design has proven its reliability over the years, offering protection against short circuits, overheating, overloads and high temperatures.
Full-load start-up: SinusMAX technology enables full-load start-up, a feature rarely found in other high-frequency inverters. This makes Phoenix inverters ideal for powering demanding loads, such as computers, LED and halogen lamps, or low-power power tools.
ECO mode: In ECO mode, the inverter automatically enters standby when the load drops below a preset level. In this standby mode, the inverter starts up periodically (default setting of 2.5 seconds) to monitor the load. If the load exceeds a certain threshold, the inverter will remain switched on.
Remote on/off: All Phoenix inverter models allow the connection of a remote control for start and stop control via a two-pin connector.
Automatic transfer switch (Filax): For low-power models, we recommend using the Filax automatic transfer switch, which ensures an extremely short transfer time (under 20 milliseconds). This allows electronic equipment, such as computers, to operate without interruption.
Technical specifications:
Dimensions: 86 x 165 x 260 mm
Weight: 3 kg
Power output at 25°C: 375VA
Rated power at 25°C / 40°C: 300W / 260W
Peak power: 700W
Output voltage: 230VAC ± 3%, frequency 50Hz or 60Hz ± 0.1%
Input voltage: 9.2V - 17V
Low voltage alarm: 10.9V
Battery power cut-off: 9.3V
Low battery voltage recovery: 14.0V
Maximum efficiency: 89%
No-load power consumption: 5.6W
Protection against short circuit, overcurrent, overtemperature
Operating temperature range: -40°C to +65°C (ventilated)
Maximum humidity: 95% (non-condensing)
Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
VE.Direct port:
Compatible with:
Computer (requires VE.Direct to USB cable)
Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Dual module)
Configurable features:
Alarms for low battery voltage and reset
Settings for battery shutdown and restart
Dynamic load-dependent disconnection
Output voltage adjustable between 210V and 245V
Frequency: 50Hz or 60Hz
ECO mode on/off and adjustable sensitivity
Monitoring of input and output voltage, charging and alarms
SinusMAX technology: Phoenix inverters use advanced SinusMAX technology, offering full-load start-up, ideal for equipment requiring high-current start-up.
Reliability and Performance:
Toroidal transformer design for superior reliability
Protection against short circuits, overloads and overheating
Compatible with demanding loads: computers, LED/halogen lamps, power tools
Smart ECO Mode: The inverter automatically switches to standby when the load drops below a preset level and resumes operation when the load increases.
On/Off Remote Control: Remote control option for remote operation, connectable to a two-pin connector.
Automatic Transfer Switch (Filax): Very short transfer time (under 20 ms) to ensure uninterrupted operation of sensitive equipment, such as computers.
Technical Specifications:
Dimensions: 86 x 172 x 275 mm
Weight: 3.9 kg
Power output (25°C): 500VA
Rated power (25°C/40°C): 400W / 350W
Peak power: 900W
Output voltage/frequency: 230VAC ± 3%, 50Hz or 60Hz ± 0.1%
Input voltage: 9.2V - 17V
Low battery voltage alarm: 10.9V
Battery cut-off: 9.3V
Battery voltage recovery: 14.0V
Maximum efficiency: 90%
Power consumption at no load: 6W
Protections: short circuit, overload, overtemperature
Operating temperature range: -40°C to +65°C (with fan)
Maximum humidity: 95% (non-condensing)
Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
VE.Direct port:
Compatible with:
Computer (requires VE.Direct to USB cable)
Apple and Android smartphones, tablets, MacBooks and other devices (requires VE.Direct Bluetooth Dual module)
Configurable features:
Alarms for low battery voltage and reset
Settings for battery shutdown and restart
Dynamic load-dependent disconnection
Output voltage adjustable between 210V and 245V
Frequency: 50Hz or 60Hz
ECO mode on/off and adjustable sensitivity
Monitoring of input and output voltage, charging and alarms
SinusMAX technology: Phoenix inverters use advanced SinusMAX technology, offering full-load start-up, ideal for equipment requiring high-current start-up.
Reliability and Performance:
Toroidal transformer design for superior reliability
Protection against short circuits, overloads and overheating
Compatible with demanding loads: computers, LED/halogen lamps, power tools
Smart ECO Mode: The inverter automatically switches to standby when the load drops below a preset level and resumes operation when the load increases.
On/Off Remote Control: Remote control option for remote operation, connectable to a two-pin connector.
Automatic Transfer Switch (Filax): Very short transfer time (under 20 ms) to ensure uninterrupted operation of sensitive equipment, such as computers.
Technical Specifications:
Dimensions: 86 x 172 x 275 mm
Weight: 3.9 kg
Power output (25°C): 500VA
Rated power (25°C/40°C): 400W / 350W
Peak power: 900W
Output voltage/frequency: 230VAC ± 3%, 50Hz or 60Hz ± 0.1%
Input voltage: 9.2V - 17V
Low battery voltage alarm: 10.9V
Battery cut-off: 9.3V
Battery voltage recovery: 14.0V
Maximum efficiency: 90%
Power consumption at no load: 6W
Protections: short circuit, overload, overtemperature
Operating temperature range: -40°C to +65°C (with fan)
Maximum humidity: 95% (non-condensing)
Certifications: EN-IEC 60335-1, EN-IEC 62109-1, UL 458, EN55014-1, EN 55014-2, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Phoenix Inverters with SinusMAX Technology – Superior Performance for Photovoltaic Applications
Cutting-edge technology – SinusMAX
SinusMAX technology is a benchmark in the photovoltaic sector thanks to its unique ability to start at full load, offering an ideal solution for applications requiring a high level of reliability. Phoenix inverters in this range are designed for professional use and are perfect for use with 24V photovoltaic kits.
Designed for Professional Performance
These inverters have been designed to deliver a clean and efficient sinusoidal output without compromise. HF hybrid technology enables compact dimensions, low weight and superior reliability, making them suitable for powering a wide range of loads, from sensitive equipment to high-consumption loads.
Key Features
Full-Load Start-up: SinusMAX technology ensures exceptional performance, even at high loads. This makes Phoenix inverters ideal for powering computers, low-power electric tools and other demanding loads.
Filax Automatic Transfer Switch: Recommended for low-power models, Filax has a transfer time of under 20 milliseconds, ensuring uninterrupted operation of sensitive electronic equipment such as computers.
LED Diagnostics and Multiple Output Sockets: Phoenix models are equipped with an LED diagnostic system and offer multiple types of output sockets for maximum flexibility.
On/Off Remote Control: Available on all models, it allows easy control of the inverter via a remote control.
Technical Specifications
Dimensions: 117 x 232 x 327 mm
Weight: 7.4 kg
Rated power at 25°C: 1200VA
Power at 25°C / 40°C: 1000W / 850W
Peak power: 2200W
Output voltage / Frequency: 110VAC or 230VAC ±3%, 50Hz or 60Hz ±0.1%
Input voltage: 18.4V – 34V
Low battery voltage alarm: 21.8V
Battery cut-off voltage: 18.6V
Regeneration voltage: 28V
Maximum efficiency: 91%
No-load power consumption: 8W
Protection: IP20 / a-f
Operating temperature range: -40°C to +65°C (with active cooling)
Humidity: Maximum 95% (non-condensing)
Standards: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 / EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Built-in Bluetooth
Fully configurable via a tablet or smartphone. This feature allows users to monitor and configure the inverters with ease.
Monitoring and configuration functions:
Low battery voltage
Low batterycut-off and restart levels
Dynamic disconnection: disconnection level depending on load
Output voltage: 210–245 V
Frequency: 50 Hz or 60 Hz
ECO mode: start/stop and level sensor for ECO mode
Alarm relay
Monitoring:
Input and output voltage
Load
Alarms
VE.Direct communication port
The VE.Direct port allows connection to a computer (via a VE.Direct to USB interface cable) to configure and monitor the same parameters.
Proven reliability
The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and are protected against overheating caused by overload or high ambient temperatures.
ECO mode
When activated, the inverter switches to standby mode when the load falls below a preset value. In standby mode, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on.
Technical specifications:
Maximum power: 4000 W
AC output voltage: 230 V
Input voltage: 9.3–17 V DC
Maximum efficiency: 92%
Operating temperature: -40 to +50 °C
Dimensions: 485 x 219 x 125 mm
Weight: 13 kg
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Built-in Bluetooth
Fully configurable via a tablet or smartphone. This feature allows users to monitor and configure the inverters with ease.
Monitoring and configuration functions:
Low battery voltage
Low batterycut-off and restart levels
Dynamic disconnection: disconnection level depending on load
Output voltage: 210–245 V
Frequency: 50 Hz or 60 Hz
ECO mode: start/stop and level sensor for ECO mode
Alarm relay
Monitoring:
Input and output voltage
Load
Alarms
VE.Direct communication port
The VE.Direct port allows connection to a computer (via a VE.Direct to USB interface cable) to configure and monitor the same parameters.
Proven reliability
The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and are protected against overheating caused by overload or high ambient temperatures.
ECO mode
When activated, the inverter switches to standby mode when the load falls below a preset value. In standby mode, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on.
Technical specifications:
Maximum power: 6000 W
AC output voltage: 230 V
Input voltage: 9.3–17 V DC
Maximum efficiency: 93%
Operating temperature: -40 to +50 °C
Dimensions: 533 x 285 x 150 mm
Weight: 19 kg
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Built-in Bluetooth
Fully configurable via a tablet or smartphone. This feature allows users to monitor and configure the inverters with ease.
Monitoring and configuration functions:
Low battery voltage
Low battery voltagecut-off and restart levels
Dynamic disconnection: disconnection level depending on load
Output voltage: 210–245 V
Frequency: 50 Hz or 60 Hz
ECO mode: start/stop and level sensor for ECO mode
Alarm relay
Monitoring:
Input and output voltage
Load
Alarms
VE.Direct communication port
The VE.Direct port allows connection to a computer (via a VE.Direct to USB interface cable) to configure and monitor the same parameters.
Proven reliability
The complex topology of the H-bridge toroidal transformer has demonstrated high reliability over the years. The inverters are short-circuit proof and are protected against overheating caused by overload or high ambient temperatures.
ECO mode
When activated, the inverter switches to standby mode when the load falls below a preset value. In standby mode, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain switched on.
Technical specifications:
Maximum power: 3000 W
AC output voltage: 230 V
Input voltage: 9.3–17 V DC
Maximum efficiency: 92%
Operating temperature: -40 to +50 °C
Dimensions: 485 x 219 x 125 mm
Weight: 12 kg
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The SOLIS Hybrid 12kW inverter is the ideal solution for efficient energy management in a three-phase energy storage system. It ensures optimal integration between solar power generation, storage batteries and domestic consumption, delivering high performance and efficiency of up to 97.6%. With support for 48V batteries and compatibility with the most powerful PV modules, this inverter is designed to offer stability and reliability in any environment.
Technical specifications:
Rated power: 12 kW
Maximum input voltage: 1000 V
Start-up voltage: 160 V
Maximum input current: 40 A
Overload capacity: 200% for 10 seconds
Maximum battery charge/discharge current: 250 A
Intelligent fan cooling, quiet operation (< 65 dB)
Nominal mains voltage: 380/400 V
Switchover time for backup: < 10 ms
Maximum efficiency: 97.6%
Advantages:
Compatible with generators to extend backup duration during power outages
Supports unbalanced loads on both mains and backup ports
High current handling capacity, ideal for high-power photovoltaic modules
Enables intelligent control of critical and non-critical loads thanks to the two backup ports
Compact design, easy to install and maintain
✅ Connection to the national grid (EN 50549-1)
✅ Colour display + touchscreen
✅ CAN/RS485 communication port
✅ Passive cooling
✅ Operates with low-voltage batteries
✅ 19,200W input from solar panels
✅ 12kW output power
✅ 5-year warranty
Download the technical data sheet
Download user manual
List of compatible batteries
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Quattro solar photovoltaic sine-wave inverter can be connected to two independent AC sources, such as the mains supply and a generator, or two generators. The Quattro inverter will automatically connect to the active source.
The Quattro solar photovoltaic sine wave inverter takes over the supply to connected loads in the event of a grid failure when the backup power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output operates only when AC power is available at one of the Quattro’s inputs. Loads that should not discharge the battery, such as a water heater, can be connected to this output.
Up to 10 Quattro inverters can be operated in parallel to achieve a higher output power. For example, ten Quattro 48/10000/140 inverters will provide 90 kW / 100 kVA of output power with a charging capacity of 1400 A.
Selectedtechnical specifications:
AC power at 25°C (VA) 5000;
Maximum power (W) 10,000;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Mains inrush current (A) 70;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 444 x 328 x 240;
Weight (kg) 30;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Quattro solar photovoltaic sine-wave inverter can be connected to two independent AC sources, such as the mains supply and a generator, or two generators. The Quattro inverter will automatically connect to the active source.
The Quattro solar photovoltaic sine wave inverter takes over the supply to connected loads in the event of a grid failure when the backup power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output operates only when AC power is available at one of the Quattro’s inputs. Loads that should not discharge the battery, such as a water heater, can be connected to this output.
Up to 10 Quattro inverters can be operated in parallel to achieve a higher output power. For example, ten Quattro 48/10000/140 inverters will provide 90 kW / 100 kVA of output power with a charging capacity of 1400 A.
Selectedtechnical specifications:
AC power at 25°C (VA) 8000;
Maximum power (W) 16,000;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Mains charging current (A) 110;
Max. efficiency (%) 96;
Operating temperature -40 to +65°C;
Dimensions (mm) 470 x 350 x 280;
Weight (kg) 41;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Quattro solar photovoltaic sine-wave inverter can be connected to two independent AC sources, such as the mains supply and a generator, or two generators. The Quattro inverter will automatically connect to the active source.
The Quattro solar photovoltaic sine wave inverter takes over the supply to connected loads in the event of a grid failure when the backup power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output operates only when AC power is available at one of the Quattro’s inputs. Loads that should not discharge the battery, such as a water heater, can be connected to this output.
Up to 10 Quattro inverters can be operated in parallel to achieve a higher output power. For example, ten Quattro 48/10000/140 inverters will provide 90 kW / 100 kVA of output power with a charging capacity of 1400 A.
Selectedtechnical specifications:
AC power at 25°C (VA) 15000;
Maximum power (W) 25,000;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Mains charging current (A) 200;
Max. efficiency (%) 96;
Operating temperature -40 to +65°C;
Dimensions (mm) 572 x 488 x 344;
Weight (kg) 72;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Quattro solar photovoltaic sine-wave inverter can be connected to two independent AC sources, such as the mains supply and a generator, or two generators. The Quattro inverter will automatically connect to the active source.
The Quattro solar photovoltaic sine wave inverter takes over the supply to connected loads in the event of a grid failure when the backup power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output operates only when AC power is available at one of the Quattro’s inputs. Loads that should not discharge the battery, such as a water heater, can be connected to this output.
Up to 10 Quattro inverters can be operated in parallel to achieve a higher output power. For example, ten Quattro 48/10000/140 inverters will provide 90 kW / 100 kVA of output power with a charging capacity of 1400 A.
Selectedtechnical specifications:
AC power at 25°C (VA) 8000;
Maximum power (W) 16,000;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Max. efficiency (%) 94;
Operating temperature -40 to +65°C;
Dimensions (mm) 470 x 350 x 280;
Weight (kg) 41;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Quattro solar photovoltaic sine-wave inverter can be connected to two independent AC sources, such as the mains supply and a generator, or two generators. The Quattro inverter will automatically connect to the active source.
The Quattro solar photovoltaic sine wave inverter takes over the supply to connected loads in the event of a grid failure when the backup power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output operates only when AC power is available at one of the Quattro’s inputs. Loads that should not discharge the battery, such as a water heater, can be connected to this output.
Up to 10 Quattro inverters can be operated in parallel to achieve a higher output power. For example, ten Quattro 48/10000/140 inverters will provide 90 kW / 100 kVA of output power with a charging capacity of 1400 A.
Selectedtechnical specifications:
AC power at 25°C (VA) 10000;
Maximum power (W) 20000;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 38–66;
Mains charging current (A) 140;
Max. efficiency (%) 96;
Operating temperature -40 to +65°C;
Dimensions (mm) 470 x 350 x 280;
Weight (kg) 45;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
Selectedtechnical specifications:
AC power at 25°C (VA) 2000;
Maximum power (W) 4000;
AC output voltage (V) 230;
Input voltage (V DC) 19–33;
Mains charging current (A) 50;
Max. efficiency (%) 94;
Operating temperature -40 to +65°C;
Dimensions (mm) 520 x 255 x 125;
Weight (kg) 13;
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Multiplus inverter is a pure sine wave inverter, a sophisticated battery charger featuring adaptive charging technology, and a high-speed AC switch, all housed in a single compact unit. In addition to these core functions, the Multiplus offers numerous advanced features.
The main output provides uninterrupted power. The Multiplus inverter takes over the supply to connected loads in the event of a mains failure when standby power or generator power is low. This happens so quickly (in less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption. The second output only operates when AC is available at one of the Multiplus’s inputs.
In addition to connecting solar inverters in parallel, three units of the same model can be configured for a three-phase output. But the connection options do not stop there: up to 6 sets of 3 units can be connected in parallel to form a large 75 kW / 90 kVA inverter with a charging capacity exceeding 2000 A.
Technical specifications:
AC power at 25°C (VA) 3000;
Maximum power (W) 6000;
AC input voltage (V) 187–265;
AC output voltage (V) 230;
Input voltage (V DC) 9.5–17;
Mains charging current (A) 120;
Max. efficiency (%) 93;
Operating temperature -40 to +65°C;
Dimensions (mm) 362 x 258 x 218;
Weight (kg) 18;
