In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT161B Multimeter
This product comes with a 3-year warranty. The UT161 series of multimeters is a range of extremely reliable, safe, durable and accurate multimeters that are CE-certified and suitable for the European market. The displays on these multimeters are backlit LCDs (dark digits on a light background) with a resolution of ±6000 (for the UT161B and UT161D) and ±22000 for the UT161E. The displays have a refresh rate of 2–3 times per second and also feature an analogue bar graph with 31 segments (UT161B and UT161D) or 41 segments (UT161E). The multimeters measure AC and DC voltages up to 1000V and are equipped with an audible and visual warning when maximum voltage/current or temperature values are reached. They allow for non-contact detection of live AC wires. The package includes a USB cable with an opto-electronic converter for data transfer to a PC. The power supply consists of four AAA (R03) batteries, and the device switches off automatically after 15 minutes of inactivity (this function can be temporarily disabled). The current inputs are protected by tubular fuses, and the fuses can be tested without opening the device.
UT161B True RMS 1000 V digital multimeter.
Product specifications:
- fully complies with IEC/EN61010-1, and features double insulation classified as CAT/III
1000V – indoor electrical installation including three-phase distribution
- Classified as CAT IV 600V – outdoor electrical installations (fuse boxes, start of indoor installations)
- HTN-type LCD display with a maximum reading of ± 6000
- refresh rate for most measurements of 3 times per second
- Automatic or manual setting ranges
- automatic polarity indication
- AC voltage measurement ranges: 60>-0V AC
Ranges: 600 μA / 10 A
- DC voltage measurement ranges: 60 mV / 1000 V
- DC current measurement ranges: 600 μA / 10 A
- Resistance measurement ranges: 600 MΩ Capacitance: 600 MΩ / 60 MΩ–60 MΩ nF / 66 mF
- Frequency measurement range: 10 Hz / 10.00 MHz
- Duty cycle measurement range: 0.1% to 99.9%
- Measurement of silicon diode transitions
- Line continuity measurement
- Non-contact high-voltage measurement
TRV detection – accuracy
NC
RMS voltage values, voltages and currents
- relative measurement mode
- MAX / MIN mode
- Overrange warning: OL
- USB cable for transferring measured values to a PC
- Input protection against overvoltage exceeding 1000V
- μA and mA input current protection with m0 V 6100 ø 6100 V 32mm CE fast-acting fuse
- Input current protection 10A via FF11A / 1000V fast-acting fuse ø10 x 38mm CE
- Input impedance in the mV range approx. 1GΩ, in other voltage ranges 10MΩ,
- testing of diodes and semiconductor junctions with voltage from 0 to 3V, test current 1.2mA
- powered by 4 x 1.5V AAA R03 batteries
- low battery indicator
- automatic switch-off after 15 minutes of Bluetooth data transfer
- optional adapter for PC
to PC
- measurement possible in electromagnetic fields with an intensity of 1 V/m with an additional error of 5%
Technical parameters:
(accuracy is defined at a temperature of 23 °C ± 5 °C and relative humidity less than or equal to 75%)
- DC voltage measurement (input range is approximately 1MV, 1MΩ 0x0x.) for other ranges):
(range / resolution / accuracy)
60.00 mV / 0.01 mV / ± (0.8% + 5)
600.0 mV / 0.1 mV / ± (0.8 % + 3)
6,000 V / 5 / 0.01 V / ± 0.1 mV / ± (0.8 % + 3) 60.00 V / 0.01 V / ± (0.5 % + 3)
600.0 V / 0.1 V / ± (0.5 % + 3)
1,000 V / 1 V / ± (1.0 % + 3)
- (in AC input voltage measurement / Ω) range / resolution / accuracy in the range from 40 Hz to 500 Hz)
60.00 mV / 0.01 mV / ± (1.2 % + 5)
600.0 mV / 0.1 mV / ± (1.2 % + 5)
6.00 ± 0 V / 0.0 ± 0 V / ± 0 V
60.00 V / 0.01 V / ± (1.0 % + 3)
600.0 V / 0.1 V / ± (1.0 % + 3)
1000 V / 1 V / ± (1.2 % + 5)
Displays the actual current value/
(range / resolution / accuracy)
600.0 μA / 0.1 μA / ± (1.0 % + 2)
6000 μA / 1 μA / ± (1.0 % + 2)
60.00 mA / 10 μA / ± 0.0 μA / ± 0.0 μA / ± (1.0 % + 2) mA / 0.1 mA / ± (1.0 % + 3)
6,000 A / 1 mA / ± (1.2 % + 5)
10,000 A / 10 mA / ± (1.2 % + 5)
- AC current measurement resolution in the range H / z / z / accuracy: 500 Hz)
600.0 μA / 0.1 μA / ± (1.2 % + 5)
6000 μA / 1 μA / ± (1.2% + 5)
60.00 mA / 10 μA / 10 μA / ± 5.0 %, ± (1.0 % + 5)
mA / ± (1.5 % + 5)
6,000 A / 1 mA / ± (2.0 % + 5)
10 A / 10 mA / ± (2.0 % + 5)
Displays the true RMS value
-
- Resistance measurement range: /> resolution accuracy 600.0 Ω / 0.1 Ω / ± (1.2 % + 2)
6,000 kΩ / 1 Ω / ± (1.0 % + 2)
60.00 kΩ / 10 Ω / ± (1.0 % + 2)
600.0 % + 2 Ω / 600.0 % + 2)
600.00 kΩ / 10 Ω / ± (1.0 % + 2)
600.0 % + 2)
6,000 MΩ / 1 kΩ / ± (1.2 % + 2)
60.00 MΩ / 10 kΩ / ± (2.0 % + 5)
- Capacitance measurement:
(range / resolution / accuracy)
nF / 3.0 % / ± 0.0 % 5)
600.0 nF / 100 pF / ± (3.0 % + 5)
6,000 μF / 1 nF / ± (3.0% + 5)
60.00 μF / 10 nF / ± (3.0% + 5) / ± (3.0% + 5) (3.0% + 5)
6,000 mF / 1 μF / ± (10 % + 5)
60.00 mF / 10 μF / ± (10 % + 5)
- Frequency measurement:
(range / resolution / accuracy 10 MHz) 10 MHz 0.01 Hz to 0.01 MHz / ± 0.1% + 4
- Duty cycle measurement:
0.1% to 99.9% / 0.1% / ± (2.0% + 5)
- Measurement of semiconductor and semiconductor measurement value 0.12 to 2 V and the green LED is lit: the diode is OK,
the measured value is less than 0.12 V and the red LED is lit: the diode may be damaged
the normal voltage drop across the silicon junction is 0.500 to 0.800 mV
voltage resolution during this measurement. continuity measurement:
when the line resistance is ≥70 Ω, an open circuit is indicated, the buzzer does not beep and the red indicator light is on
when the line resistance is ≤50 Ω, a continuous circuit is indicated, the buzzer emits a continuous beep and the green indicator light is on
This resolution for overload protection
10:00V: 0.1 Ω
General specifications:
- operating temperature: 0 °C - 40 °C (32 °F - 104 °F)
- Relative humidity: ≤75% at 0 °C – 30 °C; ≤50% at 30 °C – 40 °C
- Storage temperature: -10°C – 50°C (14°F – 122°F)
- Operating altitude: ≤2000 m
- Electromagnetic compatibility: complies with EN61326-1: 2006
- dimensions: 186 mm × 89 mm × 49 mm
- Weight: 400 g
- the device complies with the following standards:
cETLus, CAT III 1000V, CAT IV 600V, double insulation, overvoltage protection for voltages greater than 102>1000V
1000V; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
Compliant with UL STD: 61010-1, 61010-2-030
Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
Package contents:
- UT161B multimeter with storage case
- Gold-plated measurement leads CAT600/1 CAT III/1000 CATV-III USB cable for data transfer to PC
- F1 fuse: 6 x 32 mm FF 600mA H 1000 V (ø6 x 32mm) CE - in the device
- Fuse F2: 6 x 25 mm FF 11A H 1000 V (ø10 x 38 mm) CE -- in the R40 AAA device
-- 1.5 V batteries
- manual in Czech, Slovak, English
Wholesale packaging:
- standard quantity per box: 20 pcs
- standard box dimensions: 480 mm x 370 mm x 325 mm
- total box weight: 17.8 kg
- Manufacturer
- UNI-TREND
-
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT15B MAX digital multimeter is a reliable True-RMS digital multimeter. Designed to withstand interference, the multimeter can filter out interference from the carrier frequency superimposed on a sinusoidal wave signal or a variable voltage distortion signal, and is capable of measuring the output voltage of a variable frequency converter. In DC/AC voltage mode, the instrument can perform frequency and duty cycle measurements.
The UT15B/17B/18B MAX series True RMS multimeters feature a compact and portable design, fast response, strong protection against EMC interference, and come with standard gold-plated test leads and fine gold-plated test leads. They are also equipped with 1000 V input protection, making them an ideal tool for electronics and electrical engineers. Certifications: CE, UKCA, cETLus, REACH, RoHS
Product specifications:
- Large LCD display, 6000-count analogue-digital display, fast ADC refresh rate: 5 times per second
- Built-in VFD for precise measurement of automatic/variable frequency bias voltage; output from relative measurement mode for capacitance over 6.2 μF in relative measurement mode
- Ability to capture maximum/minimum (MAX/MIN) values during voltage, current and resistance measurement
- full protection against false detection, enabling it to withstand a surge voltage of up to 1000 V; designed with overvoltage and overcurrent indication
- the current input terminal is equipped with audible and visual indicators for incorrect connection
- two test probes (standard and fine-tip)
- LED indication for high test voltage (≥30 V).
- Two backlight modes (high/low brightness).
- When switching positions, the AC/DC memory function is activated.
Technical parameters:
- DC voltage measurement ranges (direct current): 600 mV / 6 V / 60 V / 600 V / 1000 V ±(0.4%+3)
- DC voltage measurement ranges (AC current): 60 / 60 V / 60 V / 60 V / 60 V / 1000 V ±(0.5%+5)
- VFD (voltage): 600 V ±(8%)
- AC current measurement ranges (alternating current): 600 μA / 6000 μA / 60 mA / 600 mA / 6 A / 6 A / ± 3.5 A / ± 3(1.2 A / ± 3) current (direct current): 600 μA / 6000 μA / 60 mA / 600 mA / 6 A / 10 A ±(1.2%+3)
- resistance measurement ranges: 600 Ω / 6 kΩ / 60 kΩ / 600 kΩ / 600 kΩ / 600 kΩ / 600 kΩ ±2)
0. Frequency measurement range: 10 Hz to 10 MHz ±(0.1%+3)
- Duty cycle measurement range: 1% to 99.9% ±(1.0%+4)
- HTN-type LCD display with a maximum display of 6000
- Diode test
- Mode: MAX/MIN background measurement mode
- MAX/MIN measurement (adjustable)
- Automatic or manual setting ranges
- Auto-off (sleep mode during inactivity)
- low battery indicator
- Audible and visual alarm
- incorrect connection alarm
- category: CATⅢ 600V
- Power supply: 2 x R6 1.5 V batteries - Battery weight:
5 V - weight:
5 V 182 mm x 91 mm x 45 mm
- accessories: 1 user manual, 2 pairs of test leads (standard gold-plated probe and fine-tip probe), 2 batteries.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT139S Multimeter
This product comes with a 3-year warranty. The UT139S is a new professional multimeter with True RMS rating and CAT III 600V protection, designed to meet the needs of electricians for measuring LV distribution networks in buildings, featuring a black EBTN display. The device is cETLus certified and includes a range of additional features, such as low-impedance voltage measurement (LoZ), non-contact voltage measurement (NCV), capacitance measurement and temperature measurement. A clear display with a 31-segment analogue line simulation ensures better readability of measured values and improved visual representation. The data on the display is shown against a dark background, unlike the UT139E, which displays dark data against a light background; otherwise, the two devices are exactly the same. The display range is ±9.999 for capacitance and frequency measurements and ±5.999 for other measurements. The refresh rate is 2 to 3 times per second. The fuses are protected by tubular fuses (10A FF 10A H / 600V fuse (6 x 25mm); mA / µA FF 600mA H / 600V fuse (6 x 32mm)). The multimeter is powered by two 1.5V AA alkaline batteries. The measurement range can be selected automatically or manually. Test leads with tips, a type K thermocouple and batteries are included.
The UT139S is the ideal choice if you want a professionally equipped multimeter with a range of premium features, which is also accurate, clear, safe and very easy to use.
Product specifications (multimeter function):
Measures the true RMS value of the device’s AC voltage and RMS (>-)
- AC voltage range (AC): 60 mV / 600 V
- AC current measurement range (AC): 600 μA / 10 A
- DC voltage measurement range (DC): 60 mV / 600 V
- DC current measurement range (DC): 600 μA / 601>- 0μA 600 Ω / 60 MΩ
- Capacitance measurement range: 9.999 nF / 99.99 mF
- Relative capacitance measurement mode (REL)
- Analogue line
- Line continuity test (buzzer)
- Diode test
- AC voltage/frequency measurement
- Variable voltage measurement (NCV) (LPF VAC)
- AC low impedance measurement (LoZ VAC)
- Duty cycle (DCL)
- Automatic and manual range selection
- Reverse polarity detection
- Data hold
- Display of minimum and maximum values
- Display backlight
- Automatic shut-off/overload protection
- Auto-off/charging indicator
fuse-protected
Technical parameters:
- DC voltage measurement (input impedance depending on range 3 to approx. 10 MΩ):
(range / resolution / accuracy)
60.00 mV / 0.01 mV / ±0.01 mV / ±0.01 mV / ±0.01 mV / ±0.5% + 2
6.000 V / 1 mV / ± 0.7 % + 3
60.00 V / 0.01 V / ±0.7% + 3
600.0 V / 0.1 V / ± 3.
AC voltage / ± 0.01 V / ± 0.7 % + 3 measurement (input impedance approx. 10 MΩ):
(range / resolution / accuracy)
60.00 mV / 0.01 mV / ± 1.0 % + 3
600.0 mV / 0.1 mV / ± 1.0 % V / 6 / 0.00 % V ± 0.8 % + 3
60.00 V / 0.01 V / ± 0.8% + 3
600.0 V / 0.1 V / ± 0.8 % + 3
LPF 600.0 V / 0.1 V / ± 4.0 %. ± 2.0 % + 10
- DC measurement:
(range / resolution / accuracy)
600.0 μA / 0.1 μA / ± 0.7 % + 2
6000 μA / 1 μA / ± 600 μA / 1 μA / ± 20.0. 0.01 mA / ± 0.7 % + 2
600.0 mA / 0.1 mA / ± 0.7 % + 2
6.000 A / 0.001 A / ± 1.0 % + 3
10.00 A / 0.00 A / 0.01 A / 0.01 A / ± 0.01 A / 0.01 A / ± 1.0 % + 3 AC current measurement:
(range / resolution / accuracy)
600.0 μA / 0.1 μA / ± 1.0 % + 3
6000 μA / 1 μA / ± 1.0 % + 3
60.00 mA / 0.00 mA / ± 1 mA / ± 0.1 % 600.0 mA / 0.1 mA / ± 1.0 % + 3
6.000 A / 0.001 A / ± 1.2 % + 3
10.00 A / 0.01 A / ± 1.2 % + 3
- resolution / resistance measurement range / accuracy / resolution
600.0 Ω / 0.1 Ω / ± 1.0 % + 2
6,000 kΩ / 0.001 kΩ / ± 0.8 % + 2
60.00 kΩ / 0.01 kΩ / ± 0.8% + 2
0.8% + 2
6,000 MΩ / 0.001 MΩ / ± 1.2 % + 3
60.00 MΩ / 0.01 MΩ / ± 1.5 % + 5
- Capacitance measurement:
(range / resolution / accuracy 9 /. 0.001 nF / in REL mode ± 4 % + 10
99.99 nF to 999.9 µF / 0.01 nF to 0.1 µF / ± 4 % + 10
9.999 mF to 99.99 µF / ± 0.01 mF / ± 0.1 µF / ± 4 % + 10 %
- Frequency and duty cycle measurement:
(range / resolution / accuracy)
9.999 Hz to 9.999 MHz / 0.001 Hz to 0.001 MHz / ± 0.1 % + 4
0.9 % to / 0.9 % to 0.9 % of reference
- Temperature measurement in °C:
(range / resolution / accuracy)
- 40 to 40°C / 1°C / ± 4
> 40 to 500°C / 1°C / ± 1.0 % to 40°C / 1°C / ± 4
> 40 to 500°C / 1°C / ± 1.0% to 40°C / 1°C 1°C / ± 2.0% + 4
- Temperature measurement in °F:
(range / resolution / accuracy)
- 40 to 104°F / 1°F / ± 5
> 104 to 932°F / ± 104 to 932°F / ± 1°C / ± 1°F / ± 1°F / ± 104°F / 1°F 932 to 1832°F / 1°F / ± 2.5% + 5
- With thermostatic probe (K-type), temperatures up to 250°C / 482°F only
- Display type: TN LCD
- Display diagonal: 68 mm
->- Sampling rate
->- 3 digits 6000
- Analogue display: 31 segments
- Multimeter dimensions: 170 x 80 x 48 mm
- Power supply: 2 x 1.5 V AA batteries (included)
- Type K thermocouple probe (included)
- Test leads with tips (included): >- 60 mm x 30 mm (included)
- Type K thermocouple probe (included) mA H 600 V (installed)
- F2 fuse: 6 x 25 mm FF 10 A H 600 V (fitted)
- Drop resistance: 1 m
- Weight: approx. 354 g (including batteries)
- Operating temperature: -10 to 50°C
- The device complies with the following standards:
cETLus, CAT III 600V, double insulation, 600V-PTC overload protection, pollution class II
EN 61326-1: ; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
Complies with UL STD: 61010-1, 61010-2-030
Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
- Manufacturer: UNI-TREND
-
Package contents:
- UT139E multimeter with V2 impact-resistant plastic cover x A/>. batteries
- Fuse F1: 6 x 32 mm FF 600 mA H 600 V (in device)
- Fuse F2: 6 x 25 mm FF 10 A H 600 V (in device)
- Temperature probe with K-type thermocouple (included)
- Test leads included in Czech and Slovak
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT139C Multimeter
This product comes with a 3-year warranty. The UNI-T UT139C is a new professional multimeter with True RMS rating and CAT III 600V protection, designed to meet the needs of electricians for measuring LV distribution networks in buildings. The innovative, industrial design with a protective sleeve ensures the multimeter’s impact resistance. The instrument includes a range of additional features, such as low-impedance voltage measurement (LoZ) (for the UT139E + UT139S variants), variable frequency voltage (VFC) measurement (for the UT139E + UT139S variants), non-contact voltage (NCV) measurement, capacitance measurement, frequency ratio measurement and temperature measurement. The large, clearly laid-out TN LCD display with backlighting ensures better visibility of measured values. The display range is ±6,000, and 9,999 for capacitance and frequency. Refresh rate of 2 to 3 times per second. The fuses are protected by tubular fuses (10A FF 10A H / 600V fuse (6 x 25mm); mA / µA FF 600mA H / 600V fuse (6 x 32mm)). The multimeter is powered by two 1.5V AA alkaline batteries. The measurement range can be selected automatically or manually. Test leads with tips, a type K thermocouple and batteries are included.
The UT139C is the ideal choice if you want a professionally equipped multimeter with a range of premium features, which is also accurate, clear, safe and very easy to use.
Product specifications (multimeter function):
- AC RMS measurement and true RMS measurement (voltage)
- AC voltage measurement ranges (AC 45 Hz to 1 kHz): 60 mV / 600 V
- AC current measurement ranges (45 Hz to 1 kHz): 600 μA / 10 A
- DC voltage measurement range: 0–60 V DC
- Current measurement: 600 μA / 10 A
- Resistance measurement ranges: 600 Ω / 60 MΩ
- Capacitance measurement ranges: 9.999 nF / 99.99 mF
- Capacitance measurement in relative mode (REL)
- Optional connection of the AC/DC continuity test lead to the AC/DC continuity test terminal
(buzzer)
- testing of diodes and semiconductor junctions at 3.2V
- Non-contact voltage measurement (NCV)
- Duty cycle measurement (DCL)
- Automatic and manual range selection
- reverse polarity detection
- Data hold function
- Automatic display shutdown
- Automatic value display shutdown when inactive
- Low battery indicator
- Overload protection, fuse protection
Technical parameters:
- DC voltage measurement (input impedance depending on the range from 3 to approx. 10 MΩ):
(range / resolution / accuracy)
60.0 ± 0.1 mV / ± 0.0 mV / ± 0.0 mV 3
600.0 mV / 0.1 mV / ± 0.5 % + 2
6.000 V / 1 mV / ± 0.7 % + 3
60.00 V / 0.01 V / ± 0.7 % + 3
+ 60.0 % V / ± 0.7 % + 3
3
- AC voltage measurement (input impedance depending on the range from 3 to approximately 10 MΩ):
(range / resolution / accuracy)
60.00 mV / 0.01 mV / ± 1.0 % + 3
600.01 mV / ± 1 mV / ± 1 mV / ± 3 mV / ± 1 mV / ± 1 mV
6,000 V / 0.001 V / ± 0.8 % + 3
60.00 V / 0.01 V / ± 0.8 % + 3
600.0 V / 0.1 V / ± 0.8 % + 3
VFC / ± 20.0 V / ± 20.0 V % + 3
- DC measurement:
(range / resolution / accuracy)
600.0 μA / 0.1 μA / ± 0.7 % + 2
6000 μA / 1 μA / ± 0.7 % + 60 / 0.1 μA / ± 0.7 % + 2
6000 μA / 1 μA / ± 0.7% + 60 / ± 0.0 0.7% + 2
600.0 mA / 0.1 mA / ± 0.7 % + 2
6.000 A / 0.001 A / ± 1.0 % + 3
10.00 A / 0.01 A / ± 1.01 A / ± 1.0 %
current measurement /
range / resolution / accuracy )
600.0 μA / 0.1 μA / ± 1.0 % + 3
6000 μA / 1 μA / ± 1.0 % + 3
60.00 mA / 0.01 mA / ± 60.0 mA / ± 1.0 % / ± 1.0 % mA / ± 1.0 % + 3
6,000 A / 0.001 A / ± 1.2 % + 3
10.00 A / 0.01 A / ± 1.2 % + 3
- Resistance measurement:
(range / accuracy) resolution
60 //0 Ω /0 0 0 0 0.1 Ω / ± 1.0 % + 2
6,000 kΩ / 0.001 kΩ / ± 0.8 % + 2
60.00 kΩ / 0.01 kΩ / ± 0.8 % + 2
600.0 kΩ / ± 2.0 kΩ / ± 2.0 kΩ / ± 2.0 % + 2
6,000 MΩ / 0.001 MΩ / ± 1.2 % + 3
60.00 MΩ / 0.01 MΩ / ± 1.5 % + 5
- Capacitance measurement:
(range / resolution / accuracy)
9.90. mode ± 4 % + 10
99.99 nF to 999.9 µF / 0.01 nF to 0.1 µF / ± 4% + 10
9.999 mF to 99.99 mF / 0.001 mF to /± 0.01 mF to 0.
- Frequency and duty cycle measurement:
(range / resolution / accuracy)
9.999 Hz to 9.999 MHz / 0.001 Hz to 0.001 MHz / ± 0.1% + 4
0.1% to 90.9% / 90.9% reference only
- Temperature measurement in °C:
(range / resolution / accuracy)
- 40 to 40°C / 1°C / ± 4
> 40 to 500°C / 1°C / ± 1.0% + 4
± 100°C / ± 100°C / ± 4
2.0 % + 4
- Temperature measurement in °F:
(range / resolution / accuracy)
- 40 to 104°F / 1°F / ± 5
> 104 to 932°F / 1°F / ± 932°F / 1°F / ± 3. 1832°F / 1°F / ± 2.5% + 5
- With thermocouple probe (K-type), temperatures up to 230°C only
- Display type: TN LCD
- Display diagonal: 68 mm
- Sampling rate: 3/s Multimeter dimensions: - 60 digits
> 170 x 80 x 48 mm
- Power supply: 2 x 1.5 V AA batteries (included)
- Type K thermocouple probe (included)
- Test leads with tips (included)
- F1 fuse: 6 x 32 mm FF 600 mA H 600 mA (fitted)
- Fuse x 60 A (fitted)
- 10 A FF 600 V (fitted)
- Drop resistance: 1 m
- Weight: approx. 354 g (including batteries)
- Operating temperature: -10 to 50°C
- The device complies with the following standards:
cETLus, CAT III 600V, double insulation, 600V-PTC overload protection, pollution class II
EN 61326-1: ; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
Compliant with UL STD: 61010-1, 61010-2-030
Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
Package contents:
- UT139C multimeter with impact-resistant plastic case
- 2 x AA 1.5 V 6 mm batteries
6 x FF
FF 600mA H 600V (in device)
- F2 fuse: 6 x 25 mm FF 10 A H 600 V (in the device)
- K-type thermocouple probe (included)
- test leads with probes (included)
- user manual in Czech, Slovak and English:
UNI-TREND
Manufacturer UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT139B Multimeter
This product comes with a 3-year warranty. The UNI-T UT139B is a new professional multimeter with True RMS rating and CAT III 600V protection, designed to meet the needs of electricians for measuring LV distribution networks in buildings. The innovative, industrial design with a protective sleeve ensures the multimeter’s impact resistance. The instrument includes a range of additional features, such as low-impedance voltage measurement (LoZ) (for the UT139E + UT139S variants), variable frequency voltage (VFC) measurement (for the UT139E + UT139S variants), non-contact voltage (NCV) measurement, capacitance measurement, frequency ratio measurement and temperature measurement. The large, clearly laid-out TN LCD display with backlighting ensures better visibility of measured values. The display range is ±4000, and 9999 for capacitance and frequency. Refresh rate of 2 to 3 times per second. The fuses are protected by tubular fuses (10A FF 10A H / 600V fuse (6 x 25mm); mA / µA FF 500mA H / 600V fuse (6 x 32mm)). The multimeter is powered by two 1.5 V AA alkaline batteries. The measurement range can be selected automatically or manually. Test leads with probes and batteries are included.
The UT139B is an ideal choice if you want a professionally equipped multimeter with a range of additional functions, which is also accurate, safe, easy to read and use.
Product specifications (multimeter function):
- True RMS (the device measures the effective value of alternating current and voltage)
- AC voltage measurement range (AC): 40 mV / 600 V
- AC current measurement range: 400 μA // DC current measurement range: 400 μA
- 1 DC
- 40 mV / 600 V
- DC current measurement ranges: 400 μA / 10 A
- Resistance measurement ranges: 400 Ω / 60 MΩ
- Capacitance measurement ranges: 9.999 nF / 99.99 mF
- Relative capacitance measurement
- Relative capacitance measurement mode
- Diodes and semiconductor junctions at 3.2 V
- Line continuity test (buzzer)
- Non-contact voltage measurement (NCV)
- duty cycle (DCL)
- automatic and manual range selection
- reverse polarity detection
- data storage
- automatic display of minimum and maximum values
- automatic value display
- auto-off
- low battery indicator
- overload protection, fused safety
Technical parameters:
- DC voltage measurement (input impedance within the range of 3 to approx. 10 MΩ):
(range / resolution / accuracy) / 0 V / m / mV. ±0.7% + 3
400.0 mV / 0.1 mV / ± 0.5 % + 2
4,000 V / 1 mV / ± 0.7% + 3
40.00 V / 0.01 V / ± 0.7% + 3.0.0.0 V / ± 0.7% V 0.7% + 3
600.0 V / 1 V / ± 0.7 % + 3
- AC voltage measurement (input impedance approx. 10 MΩ):
(range / resolution / accuracy)
40.00 mV / 0.01 mV / ± 0.01 mV / ± 0.01 mV / ± 0.0 % mV / 0.1 mV / ± 1.0 % + 3
4,000 V / 0.001 V / ± 0.8 % + 3
40.00 V / 0.01 V / ± 0.8 % + 3
400.0 V / 0.1 V / 0.1 V / ± 0.1 V / 0.01 V / ± 0.8 % + 3
400.0 V / 0.1 V / 0.1 V / ± 0.8 % + 3
VAC 200 to 600.0 V / 0.1 V / 1 V / ± 4.0 % + 3
- DC measurement:
(range / resolution / accuracy)
1 μA / 0.0 μA / ± 0.8 % + 3
% + 2
4000 μA / 1 μA / ± 0.7 % + 2
40.00 mA / 0.01 mA / ± 0.7 % + 2
400.0 mA / 0.1 mA / ± 0.7 % + 2 / ± 0.01 mA / ± 0.7 % + 2
1.0 % + 3
10.00 A / 0.01 A / ± 1.0 % + 3
- AC current measurement:
(range / resolution / accuracy)
400.0 μA / 0.1 μA / ± 1.0 μA / ± 1.0 μA / ± 1.0 μA / μA ± 1.0 % + 3
40.00 mA / 0.01 mA / ± 1.0 % + 3
400.0 mA / 0.1 mA / ± 1.0 % + 3
4.000 A / 0.001 A / 0.001 A / ± 1.0 % / 1.0
A / ± 1.2 % + 3
- Resistance measurement:
(range / resolution / accuracy)
400.0 Ω / 0.1 Ω / ± 1.0 % + 2
4,000 kΩ / 0.001 kΩ / 0.001 kΩ / ± 40.0 Ω / ± 0.1 Ω / ± 1.0 % + 2
0.01 kΩ / ± 0.8 % + 2
400.0 kΩ / 0.1 kΩ / ± 0.8 % + 2
4.000 MΩ / 0.001 MΩ / ± 1.2 % + 3
40.00 MΩ / ± 0.01 MΩ / ± 5.
- Capacitance measurement:
(range / resolution / accuracy)
9.999 nF / 1 pF / in REL mode ± 4 % + 10
99.99 nF to 999.9 µF / 0.01 nF ± 4 % / 0.01 nF ± 4 % + 10
9.999 mF to 99.99 mF / 0.001 mF to 0.01 mF / ± 10 %
- Frequency and duty cycle measurement:
(range / resolution / accuracy)
9.999 Hz to /9 ¼.090 MHz / 9 ¾ a. MHz / ± 0.1% + 4
0.1% to 99.9% / 0.1% / Reference only
- Display type: TN LCD
- Display diagonal: 68 mm
- Sampling frequency: 3 / s
- Number of digits: 4000 VA
- Device dimensions: 170 x 80 x 48 mm
- Drop resistance: 1 m
- Weight: approx. 354 g (including batteries)
- Operating temperature: -10 to 50 °C
- The device complies with the following standards:
cETLus, CAT III 600V, double insulation, 600V-PTC overload protection, pollution class II
1 600 V; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
Compliant with UL STD.: 61010-1, 61010-2-030
Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
- Manufacturer: UNI-TREND
-
Package contents:
- UT139B multimeter with impact-resistant cover - 1 plastic case
batteries
- Fuse F1: 6 x 32 mm FF 500 mA H 600 V (in device)
- Fuse F2: 6 x 25 mm FF 10 A H 600 V (in the device)
- test leads with probes (included)
- user manual in Czech, Slovak and English
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT139A Multimeter
This product comes with a 3-year warranty. The UNI-T UT139A is a new professional multimeter with True RMS rating and CAT III 600V protection, designed to meet the needs of electricians for measuring JT distribution networks in buildings. The innovative, industrial design with a protective sleeve ensures the multimeter’s impact resistance. The instrument includes a range of additional features, such as low-impedance voltage measurement (LoZ) (for the UT139E + UT139S variants), variable frequency voltage (VFC) measurement (for the UT139E + UT139S variants), and non-contact voltage (NCV) measurement. The large, clearly laid-out backlit TN LCD display ensures better visibility of measured values. The display range is ±1999. The refresh rate is 2 to 3 times per second. The fuses are protected by tubular fuses (10A FF 10A H / 600V fuse (6 x 25mm); mA / µA FF 200mA H / 600V fuse (6 x 32mm)). The multimeter is powered by two 1.5 V AA alkaline batteries. The measurement range can be selected automatically or manually. Test leads with tips and batteries are included.
The UT139A is an ideal choice if you want a professionally equipped multimeter with a range of additional functions, which is also accurate, safe, easy to read and use.
Product specifications (multimeter function):
- True RMS (the device measures the effective value of AC current and voltage)
- AC voltage measurement ranges (45 to 400 Hz): 20 mV / 600 V
- AC current measurement ranges (0.005 μA to 4 μA at 400 Hz): 10 A
- DC voltage measurement ranges (DC): 20 mV to 600 V
- DC current measurement ranges (DC): 200 μA / 10 A
- Resistance measurement: 200 Ω / 60 MΩ
- Diode and semiconductor continuity test 2.1 V (buzzer)
- Non-contact voltage measurement (NCV) without test leads connected
- Automatic and manual range selection
- Reverse polarity detection
- Data hold
- Display of minimum and maximum values
- display backlight
- automatic switch-off when inactive - overload protection
- low battery
- overload protection
Technical parameters:
- DC voltage measurement (input impedance depending on range 3 to approx. 10 MΩ):
(range / resolution / accuracy)
20.00 mV / 0.01 mV / ± 0.7 mV / ± 0.7 mV / ± 0.7 mV / ± 0.7 mV / ± 0.5% + 2
2,000 V / 1 mV / ± 0.7 % + 3
20.00 V / 0.01 V / ± 0.7 % + 3
200.0 V / 0.1 V / ± 0.7 % + 3.0.0 V / ± 0.7 % / 3.0 V / ± 0.7 % + 3
+ 3
- AC voltage measurement (input impedance approx. 10 MΩ):
(range / resolution / accuracy)
20.00 mV / 0.01 mV / ± 1.0 % + 3
200.0 mV / 0.1 mV / ± 0.1 mV / 0.1 mV / ± 3.0 % / 0.001 V / ± 0.8 % + 3
20.00 V / 0.01 V / ± 0.8 % + 3
200.0 V / 0.1 V / ± 0.8 % + 3
600.0 V / 1 V / ± 3.2 V / ± 0.1 V / ± 0.1 V / ± 0.8 % + 3
600.0 V / 0.1 V / 1 V / ± 4.0 % + 3
- DC measurement:
(range / resolution / accuracy)
200.0 μA / 0.1 μA / ± 0.7 % + 2
200.0 μA / 0.1 μA / ± 0.7 % + 2
200.0 μA / ± 2 μA / ± 2 μA / ± 2 μA / ± 2 μA
20.00 mA / 0.01 mA / ± 0.7 % + 2
200.0 mA / 0.1 mA / ± 0.7 % + 2
2,000 A / 0.001 A / ± 1.0 % + 3.0 % + 3.0 % / ± 0.00 A / ± 0.7 % + 2 3
- AC current measurement:
(range / resolution / accuracy)
200.0 μA / 0.1 μA / ± 1.0 % + 3
2,000 μA / 1 μA / ± 1.0 % + 3
1.0 % mA / ± 1.0 % + 3
+ 3
200.0 mA / 0.1 mA / ± 1.0 % + 3
2,000 A / 0.001 A / ± 1.2 % + 3
10.00 A / 0.01 A / ± 1.2 % + 3.001 A / ± 1.2 % + 3
10.00 A / 0.01 A / ± 1.2 % + 3.000 A / 0.001 A / ± 1.2 % + 3
10.00 A / 0.01 A / ± 1.2 % + 3.000 A / 0.001 A / ± 1.2 % + 3
)
200.0 Ω / 0.1 Ω / ± 1.0 % + 2
2,000 kΩ / 0.001 kΩ / ± 0.8 % + 2
20.00 kΩ / 0.01 kΩ / ± 0.8 % / ± 0.8 % / 20 Ω / 0.01 kΩ / ± 0.8 % + 2
0.8 % + 2
2,000 MΩ / 0.001 MΩ / ± 1.2 % + 3
20.00 MΩ / 0.01 MΩ / ± 1.5 % + 5
- Display type: TN LCD
- Sampling frequency
68 mm/- Display diagonal: 68 mm/
of digits: 2000
- Power supply: 2 x 1.5 V AA batteries
- Device dimensions: 170 x 80 x 48 mm
- Drop resistance: 1 m
- Weight: approx. 354 g (including batteries)
- Operating temperature: -10 to 50 °C
- The device complies with the following standards:
cETLus, CAT III 600V, double insulation, 600V-PTC overload protection, pollution class II
1 2 1 EN 1 : 2 0 EN EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
Compliant with UL STD.: 61010-1, 61010-2-030
Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033
- Manufacturer: UNI-TREND
-
Package contents:
- UT139B multimeter with V2 impact-resistant plastic cover x A/>. batteries
- Fuse F1: 6 x 32 mm FF 200 mA H 600 V (in device)
- Fuse F2: 6 x 25 mm FF 10 A H 600 V (in device)
- Test leads with probes (included)
- user manual in Czech, Slovak and English
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT131D Multimeter
This product comes with a 3-year warranty. UT131D with non-contact electric field measurement
The new generation of multimeters in the UT131 series offers a higher standard of measurement in the low-cost multimeter category. The innovative, industrial design ensures the multimeter can withstand a drop from a height of two metres. The new LCD display is both more comprehensive and more practical for all users and features a backlight option. Multimeters in the UT131 series ensure safe use and measurement in accordance with CAT II standards.
Multimeter functions:
AC voltage measurement – 200 V / 250 V
DC voltage measurement - 200 mV / 250 V
DC current measurement: 0.1 μA – 0000.
Resistance measurement - 200.0 Ω / 20.0 MΩ
Non-contact electric field measurement with audible indication
Continuity test (buzzer)
Diode test
Manual range selection
Reverse polarity detection
Automatic light switch-off>Data hold function
Auto display after backlight off/15-minute display
Test leads included
Low battery indication
Overload protection, fused
Technical parameters:
AC voltage measurement (range, resolution, accuracy):
200.00 V / 0.1 V / ± 3 V / ± 1.2 V / ± 1.0 V / ± 1.2 V 1.2 % + 3
DC voltage measurement (range, resolution, accuracy):
200 mV / 0.1 mV / ± 0.7% + 3
2000 mV / 1 mV / ± 0.5 % + 2
20.00 V / ± 0.00 V / 7 % / ± 0.7 % 3
200.0 V / 0.1 V / ± 0.7 % + 3
250 V / 1 V / ± 0.7 % + 3
DC current measurement (range, resolution, accuracy):
2000.0 μA / 1 V / ± 0.7 % + 2 μA / ± 2 μA / 0.0 % / 0.01 mA / ± 1.0 % + 2
200.0 mA / 0.1 mA / ± 1.0 % + 2
10.00 A / 0.01 A / ± 1.2 % + 5
Resistance measurement (range, resolution, accuracy) /
2000 Ω / 1 Ω / ± 0.8 % + 2
20.00 kΩ / 0.01 kΩ / ± 0.8 % + 2
200.0 kΩ / 0.1 kΩ / ± 2.0 kΩ / 0.80 kΩ / ± 0.80 kΩ / 0.8 % + 2
0.01 MΩ / ±1.2% + 3
200.0 MΩ / 0.1 MΩ / ± 5.0 % + 10
The multimeter complies with IEC 61010-1, IEC 61010-2-030, CAT II
Dimensions 771 x 71 (mm) 47
Power supply: 2 x 1.5 V AAA batteries (included)
Weight: approx. 206 g (with batteries)
Operating temperature: 0 - 40°C
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT133B Multimeter
This product comes with a 3-year warranty. 1. Audible overvoltage/overcurrent alarm
2. High voltage warning
3. Auto-off (can be disabled)
4. Low power consumption
5. Fast and accurate capacitance measurement
6. Withstands a 2 m drop
Specifications UT133B range:
DC voltage (V) 600mV/6000mV/60V/600V ±(0.5%＋3)
AC voltage (V) 600V ±(1) DC ±(1)/>+3 (A). 600μA/60mA/600mA/10A ±(1%+2)
Resistance (Ω) 600Ω/6000Ω/60kΩ/600kΩ/60MΩ ±(0.8%+2)
Capacitance (F) 9.999 nF/99.99 nF/999.9 nF/9.999 μF/99.99 μF/999.9 μF/9.999 mF ±(4%+5)
Features
Display range 6000
Manual selection
〚
Continuity buzzer √
Battery test Tests 1.5V and 9V batteries and
displays status as ‘good’, ‘low’, ‘bad’ √
NCV √
LCD backlight √ Test probe holder √
Hold down √
Low battery indicator √
Overload indication √
General features
Power: 1.5V battery (R03) x 2
Display 56.8 mm x 36.1 mm
Net product weight
Product weight 2.5 V (R03) (with batteries)
Product dimensions 155 mm x 76.5 mm x 49 mm
Standard accessories Manual, test leads
Standard individual packaging Gift box, English manual
Standard quantity per box 350mm x 335mm x 318mm
Gross weight of box of 30 pcs. 12.5 kg
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT133A Multimeter
This product comes with a 3-year warranty. 1. Audible overvoltage/overcurrent alarm
2. High voltage warning
3. Auto-off (can be disabled)
4. Low power consumption
5. Fast and accurate capacitance measurement
6. Withstands a 2 m drop
Specifications UT133A range:
DC voltage (V) 600mV/6000mV/60V/600V ±(0.5%＋3)
AC voltage (V) 600V ±(0)/>+3 (A) (V) 600μA/60mA/600mA/10A ±(1%+3)
AC current (A) 10A ±(1.2%+3)
Resistance (Ω) 600Ω/6000Ω/60kΩ/600kΩ/60MΩ ±(0.8%F)Capacitance +2) 9.999 nF/99.99 nF/999.9 nF/9.999 μF/99.99 μF/999.9 μF/9.999 mF ±(4%+5)
Frequency (Hz) 10.00 Hz~1,000 MHz~1,000 MHz+5)(temperature) ±(temperature). ‒40°C~1,000°C ±(1%+4)
Temperature (℉) –40℉–1832℉ ±(1.5%+5)
Features
Display range 6000
Automatic selection
‚
Continuity buzzer √
NCV √
LCD backlight √
Test probe holder √
Data hold √
Low battery indicator />√ Charging indicator />√
General features
Battery power 1.5V (R03) x 2
Display 56.8mm x 36.1mm
Product colour: Red and grey
Net product weight 255g (with batteries)
Product dimensions 155mm x 76.1mm, manual accessories x 76.9mm, manual test leads, K-type thermocouple
Standard individual packaging: Gift box, English manual
Standard quantity per box 350mm x 335mm x 318mm
Standard box quantity: 30 pcs
Standard gross box weight 12.5kg
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT131C Multimeter
This product comes with a 3-year warranty. UT131C with temperature measurement
The new generation of multimeters in the UT131 series offers a higher standard of measurement in the low-cost multimeter category. The innovative, industrial design ensures the multimeter can withstand a drop from a height of two metres. The new LCD display is both more comprehensive and more practical for all users and features a backlight option. Multimeters in the UT131 series ensure safe use and measurement in accordance with CAT II standards.
Multimeter functions:
AC voltage measurement – 200 V / 250 V
DC voltage measurement - 200 mV / 250 V
DC current measurement: 0.1 μA – 0000.
Resistance measurement - 200.0 Ω / 20.0 MΩ
Temperature measurement: -40°C to +250°C
Continuity test (buzzer)
Diode test
Manual range selection
Reverse polarity detection
Automatic backlight shut-off
Auto display/shutdown
Display function/display
idle for 15 min
Test leads and K-type thermocouple included
Low battery indicator
Overload protection, fused
Technical parameters:
AC voltage measurement (range, resolution, accuracy):
200.00 V / ± 3 V / ± 3. 250 V / 1 V / ± 1.2 % + 3
DC voltage measurement (range, resolution, accuracy):
200 mV / 0.1 mV / ± 0.7 % + 3
2000 mV / 1 mV / ± 0.5 % V / 20.0 ± 0.7 % + 3
200.0 V / 0.1 V / ± 0.7 % + 3
250 V / 1 V / ± 0.7 % + 3
DC current measurement (range, resolution, accuracy):
2000.0 % / ± 1 μA / ± 1 μA / ± 1 μA 2
20.0 mA / 0.01 mA / ± 1.0 % + 2
200.0 mA / 0.1 mA / ± 1.0 % + 2
10.00 A / 0.01 A / ± 1.2 % + 5
resolution (measurement resolution,
accuracy) 200.0 Ω / 0.1 Ω / ± 1.0 % + 2
2000 Ω / 1 Ω / ± 0.8 % + 2
20.00 kΩ / 0.01 kΩ / ± 0.8 % + 2
200.0 kΩ /
200.0 kΩ /
200.0 kΩ /
20.0 kΩ /
20.00 MΩ / 0.01 MΩ / ±1.2 % + 3
The multimeter complies with IEC 61010-1, IEC 61010-2-030, CAT II
Dimensions (mm): 134 x 77 x 47 Power supply: 1 VAAA x 5 AA. (included)
Weight: approx. 206 g (with batteries)
Operating temperature: 0 - 40°C
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT131B Multimeter
This product comes with a 3-year warranty. The new generation of UNI-T UT131 multimeters offers a higher standard of measurement in the much more affordable category of digital multimeters. The innovative, industrial design with a protective sleeve ensures the multimeter can withstand impacts and drops from up to two metres. The new LCD display is clearer and more practical for all users, plus it features a backlight option. The UT131 series multimeters ensure safe handling and measurement; they are classified as CAT II safety category (double-insulated instruments) and are designed for measurements in circuits up to 250V AC or DC. The display range is ±1,999. Current range protection is provided by fast-acting fuses (10A fuse 10A / 250V; mA / µA fuse 200mA). The multimeter is powered by two 1.5V AAA alkaline batteries.
The UT131B model from the UT131 series features manual selection of the measurement range for Vst, Vss, mV DC/AC, resistance, beeper, semiconductor, µA DC/AC, mA DC/AC plus, DC/AC battery test and load.
Product specifications:
- display range ± 1,999
- measures V AC, V DC, mV DC/AC, µA DC/AC, mA DC/AC, A DC/AC, resistance, capacitance, current (buzzer), semiconductor voltage transitions (diodes):
- m20 diodes 250 V
- AC voltage measurement range: 200 mV to 250 V
- DC current measurement range: 200.0 μA to 10.00 A
- Resistance measurement range: 200.0 Ω to 200.0 MΩ
- Battery test: 5 V; 9 V; 12 V on load resistors 30 Ω; 900 Ω; 60 Ω
- Safety category CAT II (double insulation) up to 250 V AC/DC
- Powered by 2x AAA 1.5V alkaline batteries
- backlit display
- Line continuity test (buzzer)
- diode test
- reverse polarity protection detection
-
indication
- automatic shut-off after 15 minutes of inactivity
- measurement leads included
Technical parameters:
- DC voltage measurement (input impedance approx. 10 MΩ):
(range / resolution / accuracy)
200 mV / 0.1 mV / ± 0.1 mV / ± 0.1 mV / 1 mV / ± 0.5% + 2
20.00 V / 0.01 V / ± 0.7% + 3
200.0 V / 0.1 V / ± 0.7% + 3
250 V / ± 3 V / ± 0.1 V / ± 0.7% + 3
250 V / ± 3 V / ± 0.1 V AC voltage measurement (input impedance approx. 10 MΩ, 40 Hz to 400 Hz sine wave):
(range / resolution / accuracy)
200.0 mV / 0.1 mV / ± 1.0% + 2
0 V 2% / 0.0 V 2% / 0.0 V 2. + 3
20.00 V / 0.01 V / ± 1.0% + 2
200.00 V / 0.1 V / ± 1.2% + 3
250 V / 1 V / ± 1.250 V / 1 V / ± 1.2% measurement current
:
(range / resolution / accuracy)
200.0 µA / 0.1 µA / ± 1.0% + 2
2000 μA / 1 μA / ± 1.0% + 2
0. m2 / ± 1.0% + 2
2000 μA / 1 μA / ± 1.0% + 2
0. 1.0% + 2
200.0 mA / 0.1 mA / ± 1.0% + 2
2.000 A / 0.001 A / ± 1.2% + 5
10.00 A / + 0.00 A / 0.01 A / ± 1.2% + 5 5
- Resistance measurement:
(range / resolution / accuracy)
200.0 Ω / 0.1 Ω / ± 1.0% + 2
2
20.00 kΩ / 0.01 kΩ / ± 0.8% + 2
200.0 kΩ / 0.1 kΩ / ± 0.8% + 2
20.00 MΩ / ± 0.00 MΩ / ± 1.2 3
200.0 MΩ / 0.1 MΩ / ± 5.0% + 10
- The device complies with IEC 61010-1, IEC 61010-2-030, CAT II
- AAA power management dimensions:
- Dimensions: 134 x 77 x 47 mm
- Weight: approx. 206 g (including batteries)
- Operating temperature: 0 - 40 °C
Package contents:
- UNI-T UT131B multimeter
- Test leads
- 2 x AAA batteries, 1.5 V
- User manual
-/
in Czech, Slovak/>
Manufacturer: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT131A Multimeter
This product comes with a 3-year warranty. The new generation of UNI-T UT131 multimeters offers a higher standard of measurement in the much more affordable category of digital multimeters. The innovative, industrial design with a protective sleeve ensures the multimeter can withstand impacts and drops from up to two metres. The new LCD display is clearer and more user-friendly for all users, plus it features a backlight option. The UT131 series multimeters ensure safe handling and measurement; they are classified as CAT II safety category (double-insulated instruments) and are designed for measurements in circuits up to 250V AC or DC. The display range is ±1,999. Current range protection is provided by fast-acting fuses (10A fuse 10A / 250V; mA / µA fuse 200mA). The multimeter is powered by two 1.5V AAA alkaline batteries.
The UT131A model from the UT131 series features automatic selection of the measurement range for Vst, Vss, mVss/s, resistance, beeper, semiconductors, µAss/s and capacitance measurements in the range of mAss/s, mAss/s, capacitance in the measurement range /s, mAss/s. 2nF to 2mF.
Product parameters:
- display range ± 1.999
- measures V AC, V DC, mV DC/AC, µA DC/AC, mA DC/AC, A DC/AC, resistance, capacitance, current (buzzer), automatic semiconductor range selection
- DC/DC measurement range: 200 mV to 250 V
- AC voltage measurement: 200 mV to 250 V
- DC current measurement: 200.0 μA to 10.00 A
- AC current measurement: 200.0 μA to 10.00 A
Resistance measurement: MΩ
- Capacitance measurement: 2,000 nF to 2,000 mF
- Safety category CAT II (double insulation) up to 250 V AC/DC
- Powered by 2x AAA 1.5V alkaline batteries
- backlit display
- Bell wire continuity test
- Buzzer continuity test with reverse polarity detection
- Data hold function
- Low battery indicator
- Automatic switch-off after 15 minutes of inactivity
- Measurement leads included
Technical specifications:
- DC voltage measurement (input impedance approx. 10MΩ):
(range / resolution / accuracy)
200 mV / 0.1 mV / ± 0.1 mV / 1 mV / ± 0.5% + 2
20.00 V / 0.01 V / ± 0.7% + 3
200.0 V / 0.1 V / ± 0.7% + 3
250 V / ± 3 V / ± 0.1 V / ± 0.7% + 3
250 V / ± 3 V / ± 0.1 V AC voltage measurement (input impedance approx. 10 MΩ, 40 Hz to 400 Hz sine wave):
(range / resolution / accuracy)
200.0 mV / 0.1 mV / ± 1.0% + 2
1 / . 3
20.00 V / 0.01 V / ± 1.0% + 2
200.00 V / 0.1 V / ± 1.2% + 3
250 V / 1 V / ± 1.2%/-
Measurement range:
(range / resolution / accuracy)
200.0 µA / 0.1 µA / ± 1.0% + 2
2000 μA / 1 μA / ± 1.0% + 2
0.0 mA / ± 0.0 mA / ± 0.0 mA 1.0% + 2
200.0 mA / 0.1 mA / ± 1.0% + 2
2.000 A / 0.001 A / ± 1.2% + 5
10.00 A / + 0.00 A / 0.01 A / ± 1.2% + 5 5
- AC current measurement (40 Hz to 400 Hz sinusoidal):
(range / resolution / accuracy)
200.0 µA / 0.1 µA / ± 1.2% + 3
/ ± 1.2% + 3
2 % + 3
20.00 mA / 0.01 mA / ± 1.2% + 3
200.0 mA / 0.1 mA / ± 1.2% + 3
2.000 A / 0.001 A / ± 5% /
10.00 A / 0.01 A / ± 1.5% + 5
- Resistance measurement:
(range / resolution / accuracy)
200.0 Ω / ± 1.0 Ω / ± 1.0 Ω / ± 1.0 2
2000 Ω / 1 Ω / ± 0.8% + 2
20.00 kΩ / 0.01 kΩ / ± 0.8% + 2
200.0 kΩ / ± 0.0 kΩ / ± 0.0 kΩ / ± 0.0 kΩ / ± 0.0 2
20.00 MΩ / 0.01 MΩ / ± 1.2% + 3
200.0 MΩ / 0.1 MΩ / ± 5.0% + 10
- Capacitance measurement: > accuracy)
2,000 nF / 0.001 nF / in REL mode ± 5% + 5
20.00 nF / 0.01 nF / ± 4% + 8
nF / ± 0. nF / ± 0.01 nF / ± 4% + 8 8
2,000 μF / 0.001 μF / ± 4% + 8
20.00 µF / 0.01 µF / ± 4% + 8
200.0 µF / 0. 200.0 µF / 0.0 µF / ± 0.0 µF 8
2,000 mF / 0.001 mF / ± 10%
- The device complies with standards IEC 61010-1, IEC 61010-2-030, CAT II
- Power supply: 2 x AAA 1.5 V batteries: 3 x 7 mm: 3 x 7 mm 47 mm
- Weight: approx. 206 g (including batteries)
- Operating temperature: 0 - 40 °C
- Manufacturer: UNI-TREND
-
Package contents:
- UNI-T UT131A multimeter
- Test leads, cables, battery
- instructions
AA/
for use
- user manual in Czech, Slovak and English
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT12S-EU Voltage Tester
This product comes with a 3-year warranty. Non-contact AC voltage tester with built-in torch and synchronised audible-visual warning function. It is widely used in the maintenance of low-voltage equipment, such as wires, cables, sockets and other electrical/electronic equipment. It is a very useful tool for electricians. Simply place the sensor head near the object to be tested or into an AC socket. When AC voltage is detected, the red LED at the tip lights up and the buzzer sounds. The buzzer frequency and detection LEDs increase as the tester approaches the object to be tested.
Product specifications:
- Detects AC mains voltage
- Voltage indication: The audible signal and flashing LED indicate the presence of voltage
- Automatic shut-off
- Drop resistance
- Flashlight
- 1m
Technical specifications:
AC voltage (high): 90 ~ 1000 V AC
Frequency range: 50/60 Hz
Built-in torch
Audible (buzzer) and visual (LED) indication Power supply indicator (LED) Automatic power supply indication (LED) off
Low voltage indication
1 m drop test
Power: 1.5V battery (R03) x 2
Product colour: red and grey
Net product weight: 50g
Product dimensions: 150 x 18 x 23 mm
Individual accessories: Standards: Standards Blister, manual
Standard quantity per box: 40 pcs
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT12M-EU PRO Line Voltage Tester
This product comes with a 3-year warranty. The UT12M-EU is a professional non-contact AC voltage tester with a built-in lamp and synchronised audible and visual warning function. In low-voltage mode, it is suitable for testing low-voltage motors (<90V), audio systems, arc welding machines, underground mine lighting, thick-insulated cables and other weakly electromagnetic devices. In high-voltage mode, it can be used for testing electrical distribution systems in the range (90–1000 V), switchboards, electrical appliances and three-phase systems.
It is widely used in the maintenance of low-voltage equipment, such as wires, cables, sockets and other electrical/electronic devices. It is a very useful tool for electricians. Simply place the sensor head near the object to be tested or the AC socket. When alternating current voltage is detected, the red or green LED on the tip lights up and the buzzer sounds. The frequency of the buzzer and the detection LED increases as the detector approaches the object being tested.
It allows the detection of a weak magnetic field near electromagnetic relays, solenoids, coils, etc.
Product parameters:
- non-contact detection of AC voltage and indication of mains voltage presence via a flashing LED and audible mains voltage signal
- magnetic field detection
- automatic switch-off when inactive
- white light torch
- drop resistance from 2 m
- IP67 dust and water resistance
Technical specifications:
- Low voltage LED
-004 V AC (1g: -02) voltage measurement range: 90 ~ 1000 V AC (red light)
- Frequency: 50/60 Hz
- Voltage indication: audible / visual
- automatic switch-off: approx. 5 minutes
- low battery warning: YES
- Vibration function: NO
- Magnetic field detection mode: YES (yellow light on)
- Operating temperature: 0–40 °C
- Storage temperature: -20 °C - 50 °C
- Relative humidity: ≤ 8% (condensation-proof)
- Protection: IP67
- Safety class: CAT IV 1000V
- Battery: 2x 1.5V AAA (R03)
- Dimensions: 150 x 18 x 23 mm
- Weight: approx. 72g
Contents of individual pack:
- blister pack containing UT12E-EU detector
- 1.5V AAA (R03) batteries: 2 pcs
- Instructions in English
Packaging for wholesale customers:
- 40 pcs. 415 mm x 245 mm x 235 mm
- gross weight of the box: approx. 3.8 kg
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT12E-EU PRO Line Voltage Tester
This product comes with a 3-year warranty. The UT12E-EU is a professional non-contact AC voltage tester with a built-in lamp and a synchronised audible and visual warning function. In low-voltage mode, it is suitable for testing low-voltage motors (<90V), audio systems, arc welding machines, underground mine lighting, thick-insulated cables and other weakly electromagnetic devices. In high-voltage mode, it can be used for testing power lines in the range (90–1000 V), switchboards, electrical appliances and three-phase systems.
It is widely used in the maintenance of low-voltage equipment, such as wires, cables, sockets and other electrical/electronic devices. It is a very useful tool for electricians. Simply place the sensor head near the object to be tested or the AC socket. When alternating current voltage is detected, the red or green LED on the tip lights up and the buzzer sounds. The frequency of the buzzer and the detection LED increases as the detector approaches the object being tested.
Product specifications:
- non-contact detection of AC mains voltage
- voltage indication via audible signal and flashing LED, with optional vibration
- automatic switch-off when inactive, with white light<br/intermittent resistance
2 m height
- IP67 dust and water resistance
Technical parameters:
- Low voltage measurement range: 24 ~ 1000 V AC (green LED is lit)
- high voltage measurement range: 90 ~ 1000 V AC:
- frequency:
6 Hz
- Voltage indication: audio / visual
- Auto-off: approx. 5 minutes
- low battery warning: YES
- vibration function: YES
- Magnetic field detection mode: NO
- Operating temperature: 0–40 °C
- Storage temperature: -20 °C – 50 °C
- Relative humidity: ≤80% (non-condensing) Drop resistance: 2 m IP67
- Safety class: CAT IV 1000V
- battery:
- Dimensions: 150 x 18 x 23 mm
- Weight: approx. 72g
Contents of individual pack:
- blister pack containing UT12E-EU detector
- 1.5V AAA (R03) batteries: 2 pcs
- Instructions in English
Packaging for wholesale customers:
- 40 pcs. 415 mm x 245 mm x 235 mm
- gross weight of the box: approx. 3.8 kg
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT12D-EU Voltage Tester
This product comes with a 3-year warranty. Non-contact AC voltage tester with built-in torch and synchronised audible-visual warning function. It is widely used in the maintenance of low-voltage equipment, such as wires, cables, sockets and other electrical/electronic equipment. It is a very useful tool for electricians. Simply place the sensor head near the object to be tested or into an AC socket. When AC voltage is detected, the red LED at the tip lights up and the buzzer sounds. The buzzer frequency and detection LEDs increase as the tester approaches the object to be tested.
Product specifications:
- Detects AC mains voltage
- Voltage indication: The audible signal and flashing LED indicate the presence of voltage
- Automatic shut-off
- Drop resistance
- Flashlight
- 1m
Technical specifications:
AC voltage (High): 90 ~ 1000 V AC
AC voltage (Low): 24 V ~ 1000 V AC
Frequency range: 50/60 Hz
Audible and visual (LED) indication
Buzzer
LED indicator
Automatic shut-off
Low voltage indicator
1m drop test
Power: 1.5V battery (R03) x 2
Product colour: red and grey
Net product weight: 50g Product dimensions: 1 x 150 x 150 mm
Standard accessories: batteries
Standard individual packaging: blister pack, manual
Standard quantity per box: 40 pcs
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT123T Multimeter
This product comes with a 3-year warranty. The UNI-T UT123T is a simple, portable multimeter for domestic use. Its compact design makes it easy to hold in one hand, and the EBTN display allows users to read values clearly from any angle. Intelligent non-contact AC electric field detection, which distinguishes between weak, strong and super-strong electric fields.
Product specifications:
- Measurement of AC/DC voltage, resistance, temperature, indication of broken wires
- Indication of the electromagnetic field around live AC wires
- Automatic battery status check
- Automatic identification of AC V/DC V measurements
- Automatic measurement of the break interval and voltage interruption for
- 15 minutes of inactivity
- Maximum display value: 4099
Technical parameters:
DC voltage measurement: 4V / 40V / 400V / 600V ± (0.5% + 2)
AC voltage: 4V / 4V / 4V / 400V / 600V ± (1.0% + 3)
Resistance measurement: 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 20MΩ ± (0.8% + 2)
Temperature measurement: from -40 °C to +300 °C to -570 °F / -570 °F (non-contact voltage detection)
Open circuit indication
Display type: EBTN
Display size: 44 x 26 mm
Maximum display value: 4099
Sampling frequency: 3 times per second
Power supply: 2xAAA batteries
Measurement 5AAA
600V standard
Dimensions: 130 x 65 x 28mm
Weight: 130g
Package contents:
- 1 pair of test leads
- 1 thermocouple
- 1.5V AAA batteries: 2
6 pcs.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. A miniature digital multimeter with an attractive and practical design, the UT118C Pen-type is a lightweight and durable instrument featuring a True RMS measurement function, ensuring accurate readings. With the ability to measure voltages up to 600V AC/DC, a wide range of resistance and capacitance measurements, and gold-plated test leads with special tips for versatility and safe operation (CAT III 600V and CAT IV 300V), it is an excellent and cost-effective choice for DIY appliance repairers. It indicates live wires, ensuring greater safety when inspecting electrical equipment.
Product specifications:
- True RMS
- 6000-count display
- CAT III 600V/CAT IV 300V
- Voltage measurement 600 V DC/AC
High resistance measurement capacity > 600 V DC/AC
600 V
measurement: 60mF
- two-stage tip length adjustment
- gold-plated test leads with special tips, hardened phosphor bronze
- certification: CE (EMC, LVD), ROHS
Technical parameters:
- AC voltage (V60): V60/V/60 ±(1%+3)
- DC voltage (V): 6 V / 60 V / 600 V ±(1%+4)
- Resistance (Ω):
600 Ω / 6 kΩ / 60 kΩ / / 600 kΩ ±(1%+3)
600 Ω / 6 kΩ / 600 kΩ ±(1%+3)
+5 MΩ/600 kΩ ±(1%+3)
6 MΩ ±(2.5%+5)
- capacitance:
600.0 nF / 6 μF / 60 μF / 600 μF ±(3.5%+8)
6 mF ±(5.0%+9)
60 mF ±(10.0%+9) frequency:+9) 999.9 Hz / 9.999 kHz / 99.99 kHz / 999.9 kHz ±(0.01%+5)
- max. display: 6000
- Alternating: 0.1% to 99.9%
- NCV / LIVE test
- True RMS
- Diode test
- Resistance test
- Auto range
- 36 x 15 mm HTN LCD display / Dual-colour source indicator
AAA-1. package)
- Product dimensions: 182.5 mm x 38.0 mm x 38.5 mm
- Product colour: grey + red
Manufacturer: UNI-TREND
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This product comes with a 3-year warranty. The UT117C multimeter is a high-precision True RMS digital multimeter featuring 600V AC/DC voltage measurement, 10A AC/DC current measurement, LPF measurement, Bluetooth functionality, and more. The main features are fast response, high precision, compact size and ease of use, and the product’s accuracy is guaranteed even after a 2-metre drop. It is a good tool for electricians. The UT117C is equipped with an LCD digital display, overload protection across all ranges and a unique design.
Product specifications:
- measurement of voltage, AC/DC current, resistance, capacitance, diode test, continuity and frequency
- Connection to an external current probe (ratio: 1mV/A)
- Data Hold/DC/DC – automatically identifies voltage/DC, NCV signal and current
- Auto power-off
- High-resolution A/D converter and data processing technology
- True RMS to ensure accurate measurement of non-linear loads
- Capable of measuring 20A (transient measurement within 10 seconds)
- LoZ function: low impedance, which prevents incorrect readings
- LPF function to ensure accurate measurement of voltage and frequency of the variable speed drive (VSD)
- Display of MAX/MIN average values for recording signal fluctuations
- White backlight allows the user to read the displayed data in a dark environment
- Features Bluetooth communication. Using the UNI-T smart measurement app, test results can be recorded and reported, and a data chart can be generated
- Ergonomic design for one-handed operation
- CAT III 600V
- drop protection: 2 m
Technical specifications:
- AC measurement range: 60 mV / 60 V / 600 V ±(1%+30)
- AC current measurement ranges: 6 A / 10 A ±(1.5%+30)
- DC voltage measurement ranges (direct current): 600 mV / 6 V / 60 V / 600 V ± 0.3% of reading DC current measurement ranges (direct current): 6 A / 10 A ±(0.5%+10)
- Auto-V range: 600 V ±(1%+3)
- LPF (ACV): 600 V ±(2%+3)
- Frequency measurement range: 99 Hz / 999 Hz / 999 Hz / Hz / Hz. ±(0.01%+3)
- resistance measurement ranges: 600 Ω to 6 MΩ ±(0.5%+5) / 40 MΩ ±(3%+5)
- Capacitance measurement range: 1000 nF / 10 μF / 100 μF / +0 μF / +0.10000 μF ±(2.5%+5)
- LCD display with a maximum reading of 60,000
- Relative measurement mode
- High voltage warning
- Audible and visual indication
- Low battery indicator
- Auto-off: approx. 15 minutes
- LCD backlight: automatic switch-off after 5 minutes
- Power supply: 3 x R03 (AAA) 1.5V batteries
- Weight: 346 g
- dimensions: 169 mm x 84 mm x 48.8 mm
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT116C Multimeter
This product comes with a 3-year warranty. The UT116C tester is a device for testing SMD soldered electronic components. On a 4-digit display with a range of 6000, it is possible to display resistance up to 60MΩ and capacitance up to 100mF. It is also possible to test diodes and Zener diodes, as well as circuit continuity with an indication for resistance below 50Ω.
Product parameters:
- measurement of resistance, circuit continuity, capacitance, diodes
- the pen can be rotated 180°, which is convenient for reading data from the tips, from which the display is convenient for measurement. LEDs
- Zener diode polarity test
- Low battery test
- Automatic shut-off after 15 minutes of inactivity
Technical parameters:
- Display range: 6000
- Automatic range switching
- Resistance measurement: 60MΩ Circuit continuity test
- up to: 100 mF
- Diode test: 3.2 V
- LED test: stabilised voltage approx. 21 V / 1 mA
- Battery test at a load current of 10 mA
- Power supply: 1.5 V (AAA) batteries x 2
- display dimensions: 39 mm x 20 mm
- External dimensions: 204 mm x 33 mm x 25 mm
- Product weight: approx. 8 g
- grey
Contents of individual pack:
- UT116C tester: 1 pc
- 1.5V (AAA) battery: 2 pcs
- Manual in Czech and English
- a gift box
Packaging for wholesale customers:
0 pcs
- 6 pcs. Standard box dimensions: 440 mm x 420 mm x 210 mm
- Gross weight of the box: approx. 7.1 kg
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT116A Multimeter
This product comes with a 3-year warranty. The UT116A tester is a device for testing SMD soldered electronic components. The four-digit display with a range of 3000 can display voltage up to 36V, resistance up to 30MΩ, and capacitance up to 30mF. It is also possible to test diodes and Zener diodes, as well as circuit continuity with a low resistance indication of less than 30Ω.
Product specifications:
- voltage measurement up to 36 V DC
- automatic identification of resistance, capacitance and diodes
- circuit resistance measurement,
- continuity,
capacitance,
capacitance> the pen can be rotated 180° from the tips, which is convenient for reading data from the display when measuring diodes/LEDs
- Zener diode polarity test
- low battery indicator
- automatic switch-off after 10 minutes of inactivity
Technical parameters:
-0 Automatic switching range:
-0 Voltage measurement up to: 36 V DC
- Resistance measurement: 30 MΩ
- circuit continuity test: ＜ 30Ω
- Capacitance measurement up to: 30 mF
- diode test: 3V
- LED test: stabilised voltage approx. 21 V / 1 mA
- Power supply: 1.5 V (AAA) batteries x 2
- display dimensions: 39 mm x 20 mm
- External dimensions: 204 mm x 33 mm x 25 mm
- Product weight: approx. 80 g
- Product colour: red and grey/
Individual packaging contents
:
- UT116A tester: 1 pc
- 1.5V (AAA) battery: 2 pcs
- manual in Czech and English
- a gift box
Packaging for wholesale customers:
- Standard quantity per box: 600 pcs x box: 400 pcs x 4 mm x 210 mm
- gross weight of the carton: approx. 7.1 kg
MANUFACTURER: UNI-TREND
https://www.uni-trend.com/
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UNI-T UT07B-EU Socket Tester
This product comes with a 3-year warranty. The UNI-T UT07B-EU is a tester designed for simple checking of 230V / AC socket connections. Using three indicator LEDs, it signals the correct connection of all three supply wires and the functionality of the switch connection.
Product specifications:
Indication of seven socket connection statuses via three LEDs:
- OK, RCD test passed.
-- green wire - No. phase - brown or black wire.
- Neutral wire missing (reversed) - blue wire.
- Phase connected in reverse.
- Phase connected in reverse and earth missing.
Technical parameters:
- Operating voltage: 230V/AC:
- Operating frequency:>-/AC:
- 50Hz to 60Hz
- RCD function test: with a current of approx. 30 mA
- Product colour: red and grey
- Weight: 80.5 g
- Dimensions: 65 x 65 x 61 mm
Contents of individual pack:
- UT07B-EU tester (in blister pack): 1 pc
- instructions for use- 1 pc
:
- standard quantity per box: 48 pcs
- standard box dimensions: 430 x 330 x 365 mm
- standard box weight: 5.4 kg
MANUFACTURER: UNI-TREND
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UT-L30 test leads – universal for multimeters
Technical specifications:
- length: test leads 900 mm- length: tip and body 136 mm- probe tip length: 15.7 mm- detachable right-angle connector- double insulation Measurement category: CAT III 1000V / CAT IV 600V 10A- use: multi-purpose connectors, all multimeters- packaging: 1 pair
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
UT-L29 test leads – universal for multimeters
Technical specifications:
- length: test leads 900 mm- length: tip and body 136 mm- probe tip length: 15.7 mm- removable dual-measurement cap- detachable Category III measurement- Category III double insulation 1000V / CAT IV 600V 10A- use: multifunctional connectors, all multimeters- packaging: 1 pair
