In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Fully equipped panel for the protection and switching of a DC photovoltaic string . It contains all the essential components for safe and efficient operation and is ready for installation.
Recommended for small-scalePV systems (1 string)IP65 protection rating – dust and moistureresistant Includes all components compliant with DCsolar standards
Panelcontents :
2P fuse block + 1 gPVfuse
DC 1100Vsurge arrester (T2) – 1 pc
4-pole 32A 1000V DC PV switch – 1 pc
UV-resistant IP65 enclosure , for surface mounting – 1 pc
Cable glands – 4 pcs
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT PROavr-10k Servomotor Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT PROavr-10k automatic voltage stabiliser.
Protect your devices against power surges
In single-phase mode, each phase can operate independently of the others. Regardless of the mains load and fluctuations in the output voltage, the KEMOT PROavr-10 stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Regulation is automatic, ensuring high precision of the output voltage. A fault in the operation of one phase does not affect the operation of the others.
Three-phase mode
In three-phase mode, it is important to maintain balance between the phases. The stabiliser monitors and controls the voltage on each phase to ensure consistency between them – it will compensate for an input voltage that is too high or too low and supply the output voltage once stabilised. If, in this mode, one of the phases is not functioning properly or is not connected, the unit will activate the protection circuit and will not supply output voltage, indicating this via the ‘PHASE ERROR’ indicator.
How does the KEMOT PROavr-10 voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain a set output voltage of 230 V. Its function is to increase an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permissible range and does not experience dangerous surges that could damage connected devices. The stabiliser’s design is based on a toroidal transformer, which ensures the device operates stably.
Servo-motor voltage stabiliser
The KEMOT PROavr-10 voltage stabiliser maintains the voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
BYPASS switch
The device is also equipped with a ‘bypass’ function, i.e. a switch that bypasses the stabiliser’s operation, allowing it to be isolated and enabling the home network to be powered without issues from an external source.
DELAY Function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT PROavr-10 is equipped with a DELAY switch button that ranges from 6 to 180 seconds, which will reduce the risk of damage to the stabiliser when devices connected to it have a high instantaneous start-up current. In addition, the KEMOT PROavr-10 stabiliser features protection against overvoltage and undervoltage, overload, overheating and short circuits.
Easy transport
To make it easier to move and position the KEMOT stabiliser in the right place, it is fitted with four sturdy wheels. Thanks to these, you can easily move the device to different locations, which will certainly make operation and maintenance easier.
Application
The KEMOT PROavr-10 can be used both at home and in the office. It is perfect for:
televisions and audio/video equipment;
speakers, mini audio systems and other audio/video devices;
household appliances such as induction hobs, microwaves, fridges and freezers;
computers, monitors, printers, cash registers and other office equipment;
furnaces and central heating pumps;
power generators.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Download DatasheetDownload ManualDownload RED Certificate
The V-TAC VT-12040-1 battery is a 10.24kWh energy storage solution designed for residential and small commercial photovoltaic systems. It uses LiFePO4 technology, valued for its stability, long service life, and operational safety.
With a nominal voltage of 51.2V and a capacity of 200Ah, the battery is designed for low-voltage systems. It can store the energy generated during the day for use in the evening, at night, or during periods of reduced photovoltaic production.
The IP65-rated enclosure limits the ingress of dust and water, providing greater flexibility when choosing the installation location. Charging is permitted within a temperature range of 0°C to 60°C.
The declared service life is at least 6,000 cycles at 25°C and 90% depth of discharge. CAN communication enables data exchange with compatible inverters and management of the system’s operating parameters.
Main Features
Storage capacity: 10.24kWh
LiFePO4 technology
Nominal voltage: 51.2V
Nominal capacity: 200Ah
IP65 protection
At least 6,000 cycles at 90% DoD
Standard charge and discharge current: 90A
Maximum continuous charge and discharge current: 100A
CAN communication
Warranty: 10 years
Benefits
Increased self-consumption: The energy generated by the photovoltaic panels can be stored for periods of reduced production.
Long service life: The LiFePO4 cells provide at least 6,000 cycles under the conditions specified by the manufacturer.
Additional protection: The IP65-rated enclosure protects the equipment against dust and water jets.
Photovoltaic system integration: CAN communication enables connection to compatible inverters.
High available power: A continuous current of up to 100A supports consumers with higher energy requirements.
Recommended Applications
Residential photovoltaic systems
Hybrid systems with energy storage
Increasing the self-consumption rate
Backup power, depending on the inverter configuration
Homes, cabins, and off-grid applications
Small commercial applications
Technical Specifications
Specification
Value
Manufacturer
V-TAC
Model
VT-12040-1
Manufacturer SKU
12766
EAN
3800170260658
Technology
LiFePO4
Nominal capacity
200Ah
Nominal voltage
51.2V
Nominal energy
10.24kWh
Standard charge current
90A
Standard discharge current
90A
Maximum continuous charge current
100A
Maximum continuous discharge current
100A
Standard charge voltage
57.6V
Maximum charge voltage
57.6V
End-of-discharge voltage
43.2V
Internal resistance
16mΩ
Communication
CAN
Cycle life
≥6,000 cycles at 25°C and 90% DoD
End-of-life capacity
70% after ≥6,000 cycles
Charging temperature
0°C to 60°C
Discharging temperature
−20°C to 60°C
Protection rating
IP65
Cell configuration
16S1P
Dimensions
460 × 265 × 800mm
Net weight
95.8kg
Colour stated in the datasheet
Grey
Warranty
10 years
Compatibility and Integration
The battery communicates via CAN protocol and must be connected to a hybrid or off-grid inverter compatible with 51.2V low-voltage LiFePO4 batteries.
Compatibility depends on the inverter model, communication protocol, and firmware version. We recommend checking compatibility before purchase.
Installation, configuration, and commissioning must be carried out by qualified personnel in accordance with the manufacturer’s instructions and applicable regulations.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Victron Energy busbar is designed for the efficient connection of up to 6 CIP fuses with ratings ranging from 100 A to 1500 A. It ensures reliable current distribution in battery systems and DC equipment, making it ideal for high-power applications such as industrial, automotive and marine applications. The robust construction of stainless steel and tin-plated copper offers durability and resistance in harsh environments.
Compatibility: CIP fuses 100 A, 200 A, 1500 A
Number of terminals: 6
Maximum current: 1500 A
Material: Stainless steel and tin-plated copper
Applications: Industrial systems, marine and electric vehicles
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT MSER-1000 Servomotor Voltage Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT MSER-1000 automatic voltage stabiliser.
Protect your devices from power surges
Regardless of the mains load and fluctuations in the output voltage, the KEMOT MSER-1000 stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Adjustment is automatic, ensuring high precision of the output voltage. The KEMOT MSER-1000 is suitable for use at home or in the office, being ideal for televisions and audio-visual equipment, as well as speakers, mini-stereo systems and other audio/video devices or computers.
How does the MSER-1000 voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain the set output voltage of 230 V. Its function is to increase an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permitted range and does not experience dangerous surges that could damage connected devices. The stabiliser’s design is based on a transformer, which ensures the device operates stably.
Servo-motor voltage stabiliser
The KEMOT MSER-1000 voltage stabiliser maintains the voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT SER-1000 Voltage Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices suddenly switching off or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT SER-1000 automatic voltage stabiliser.
Protect your devices from power surges
Regardless of the mains load and fluctuations in output voltage, the KEMOT SER-1000 stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Adjustment is automatic, ensuring high precision of the output voltage. The KEMOT SER-1000 is suitable for use at home or in the office, being ideal for televisions and audio-visual equipment, as well as speakers, mini-stereo systems and other audio/video devices or computers.
How does the SER-1000 voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain the set output voltage of 230 V. Its function is to boost an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permitted range and does not experience dangerous surges that could damage connected devices. The stabiliser’s design is based on a toroidal transformer, which ensures the device operates stably.
DELAY function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT SER-1000 is equipped with a DELAY start-up delay button with a range of 6 to 180 seconds, which reduces the risk of damage when devices connected to it have a high instantaneous start-up current. In addition, the SER-1000 stabiliser features protection against overvoltage, undervoltage, overload, overheating and short circuits.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The V-TAC 1000W portable power station is a modern and efficient solution for powering electrical equipment wherever you need energy. Designed for both indoor and outdoor use, this portable battery provides energy independence for camping, travel, field work or emergencies.
Equipped with LiFePO4 technology, it ensures a long service life, high safety and stable performance. Thanks to its solar charging function and smart Wi-Fi control, the product is an ideal choice for modern users seeking autonomy and total control over energy consumption.
Key features
1000W rated power – ideal for powering essential equipment
LiFePO4 battery – over 2000 charge cycles
Compatible with solar charging (integrated MPPT)
Smart control and monitoring (Wi-Fi)
Portable, compact and easy-to-carry design
Multiple ports: AC, USB, USB-C, DC, wireless
Multiple protections: overvoltage, short circuit, temperature
General information
Product type
Portable power station
Battery technology
LiFePO4
Capacity
614Wh
Life cycles
>2000 cycles
Performance
Rated power
1000W
Maximum power
1200W / 1800W peak
Waveform
Pure sine wave
Charging
AC charging
220V / up to 1000W
Solar charging
10V–60V, max. 400W, MPPT
Car charging
12V
Outputs
AC
230V
USB-A
QC 3.0
USB-C
PD up to 65W–100W
DC
12V
Wireless
15W
Others
Features
LED torch, SOS mode, Wi-Fi
Protections
Overcurrent, overvoltage, short circuit
Weight
approx. 14–16 kg
Dimensions
approx. 420 × 240 × 266 mm
User benefits
Power wherever you need it – no mains connection required
Ideal for camping, off-grid use, mobile work or home backup
Compatible with solar panels for complete autonomy
Silent and emission-free operation
Smart control and simple operation
High safety thanks to the integrated BMS
Recommended applications
Camping, caravans, van life
Powering small and medium-sized electrical appliances
Backup in the event of a power cut
Field work / construction sites
Use in households or areas without mains access
✅ High-quality LiFePO4 cells
✅ DC charging from solar panels or a car (12V)
✅ 12V/8A DC car output
✅ 2x 65W USB-C ports
✅ 15W 3A wireless charging
✅ Flashlight
Download the technical data sheet
Download the manual
Download the declaration of conformity
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 100A, 58V MIDI fuse is specifically designed to protect 48V electrical equipment against overloads and short circuits. This individual fuse is ideal for applications requiring safe and reliable protection in DC systems, offering a high level of protection and durability.
Rated current: 100A
Maximum voltage: 58V
Fuse type: MIDI
Compatibility: 48V products
Package: 1 piece
Perfect for renewable energy systems and other applications operating at high voltages, this MIDI fuse is essential for the optimal protection of electrical devices.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The MONO FLEX 100W monocrystalline flexible solar panel offers a cell conversion efficiency of over 21.6%, making it an optimal solution for mobile applications and installations where flexibility is required. Constructed with matt PET film and EVA laminate, it is resistant to water and harsh environmental conditions, making it ideal for caravans, boats, camping, off-grid systems and other mobile applications.
Being ultra-light (2.13 kg) and slim, it is easy to install in tight or curved spaces without compromising performance.
Quality testing and warranty:
Electrical insulation test
Environmental resistance test
Anti-hot spot test
UV radiation resistance test
Temperature variation and hail impact resistance test
Humidity resistance test
Durability test
Mechanical strength test
Technical specifications:
Maximum power (Pmax): 100W
Tolerance: ±3%
Open-circuit voltage (Voc): 22.46V
Voltage at maximum power (Vmp): 18.72V
Current at maximum power (Imp): 5.34A
Short-circuit current (Isc): 5.77A
Module efficiency: 18.2%
Solar cell efficiency: 21.6%
Rated fuse: 10A
Protection class: IP65
Maximum panel voltage: DC1000V
Operating temperature: –40°C … +85°C
Dimensions: 1080 × 540 × 4 mm
Weight: 2.13 kg
✅ Easy to carry
✅ Lightweight
✅ Suitable for caravans and boats
Download the technical data sheet
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The ETIMAT 6 automatic circuit breaker from ETI is designed to provide effective protection for electrical circuits against overloads and short circuits. With a breaking capacity of 6kA and a Type B tripping characteristic, this device ensures fast and reliable protection in residential and commercial applications.
Technical specifications:
Product code: 002111514
Rated current: 10 A
Tripping characteristic: B
Number of poles: 1P
Rated voltage: 230/400 V AC
Rated frequency: 50/60 Hz
Breaking capacity: 6 kA
Rated insulation voltage (Ui): 500 V
Rated impulse withstand voltage (Uimp): 6 kV
Protection rating: IP20
Mounting: on 35 mm DIN rail (1 module)
Dimensions (width x height x depth): 18 x 85 x 73 mm
Weight: 0.103 kg
Conductor cross-section: 1…25 mm²
Standard: EN/IEC 60898-1, 60947-2
Advantages:
Reliable protection: ensures rapid disconnection in the event of an overload or short circuit.
Compact design: takes up minimal space in the switchboard.
Easy installation: mounting on standard DIN rail.
Durability: robust construction, compliant with international standards.
This automatic circuit breaker is ideal for protecting single-phase circuits in residential and commercial electrical installations, offering safety and reliability in operation.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This robust and efficient torch is ideal for a wide range of applications, featuring a state-of-the-art SMD LED chip. With a power output of 10W, it delivers an impressive light output of 1000 lumens, ensuring excellent illumination in total darkness. The casing is made from aluminium alloy, making it strong and durable, with a matt black finish that adds a stylish look.
Technical details include a 3.7V 2000mAh battery, which allows for extended runtime and a charging time of approximately 4.5 hours. The torch has an IP54 rating, making it protected against dust and water splashes, which makes it suitable for use in various weather conditions. The torch also turns on instantly, in just 0.001 seconds, providing maximum brightness as soon as it is switched on.
Built to operate in temperatures ranging from -20°C to +45°C, this torch is an excellent choice for outdoor activities, camping or professional use. Its durability, efficiency and high-quality performance make it ideal for anyone looking for a reliable and powerful lighting solution.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The EXTOL PREMIUM combination screwdriver set is designed for professional use, offering a practical combination of VDE-insulated and non-insulated screwdrivers, along with a voltage tester. It is the ideal solution for electricians and technicians who need flexibility, safety and durability in a single set.
The screwdrivers are made from CrV steel with a matt finish, and the ergonomic handles, made from PP plastic and covered with non-slip TPR rubber, ensure greater torque and excellent control during use.
Key features:
Combination set: VDE-insulated + non-insulated screwdrivers
VDE insulation for live work up to 1000 V
CrV steel shaft, matt finish
Ergonomic handle made of PP + non-slip TPR
Increases tightening torque and user comfort
Includes a practical fabric pouch for transport and storage
Set contents (12 pieces):
Non-insulated screwdrivers:
(-) 3.5 × 75 mm
(-) 5.5 × 100 mm
(-) 6.5 × 125 mm
PH1 × 100 mm
PH2 × 125 mm
VDE-insulated screwdrivers (up to 1000 V):
(-) 3.5 × 75 mm
(-) 4 × 100 mm
(-) 5.5 × 125 mm
PH1 × 80 mm
PH2 × 100 mm
Accessories:
Voltage tester (-) 3 × 65 mm
Polyesterfabric case
Material: CrV
Benefits:
Complete set for electrical and mechanical work
Enhanced safety thanks to VDE screwdrivers
Easy organisation and transport
Durability and reliability EXTOL PREMIUM
Ideal for professional electricians and technical service
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Technical specifications
Light colour: Neutral
Colour temperature: 4000K
Luminous flux: 1200 lm
Beam angle: 120°
IP rating: IP65 (water and dust resistant)
Start-up time: Instant, 0.001 seconds
Operating conditions: -20°C to +60°C
Housing details
Material: Aluminium
Housing colour: Black
Dimensions: 235x55x180mm
Product weight: 2.12 kg
Certifications & standards
Certifications: CE, EMC, ROHS
General information
LED type: SMD
Warranty: 2 years
This solar LED floodlight is ideal for efficient outdoor lighting, with a neutral 4000K light, a luminous flux of 1200 lm and an IP65 protection rating.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Victron Energy MEGA 125A/80V ceramic fuse is ideal for the effective protection of DC systems against overloads and short circuits. With a robust ceramic construction, this fuse offers superior resistance to high temperatures, making it perfect for applications involving high voltages and high currents. The set includes 5 fuses, for long-term use in solar systems, electric vehicles and industrial equipment.
Rated current: 125A
Maximum voltage: 80V
Material: Ceramic
Compatibility: DC systems, 48V and above
Pack: 5 pieces
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 125kW Inverter + 233kWh Storage Kit from Kstar is a state-of-the-art solution for the efficient storage and use of solar energy, ideal for large-scale photovoltaic projects. With an AC output power of 125 kW and a storage capacity of 233 kWh, this kit is perfect for meeting the requirements of the most demanding commercial and industrial applications. IP65 protection makes this system suitable for outdoor installation, ensuring optimal performance even in harsh weather conditions.
Technical data:
KAC120D inverter (125 kW):
Maximum PV input voltage: 1000 V
Minimum input voltage: 580 V
Nominal operating voltage: 580 V – 1000 V
Maximum input current: 322 A
Maximum DC input power: 134 kW
Number of DC inputs: 1
Nominal AC output power: 120 kW
Maximum AC output power: 132 kVA
Maximum AC current: 191 A
Rated AC voltage: 400 V (±15% of 10%)
Efficiency: 98.5%
Reverse connection protection, DC protection, overvoltage protection
IP protection: IP65
Battery storage – BC233DE:
Battery type: LFP (LiFePO4)
Battery capacity: 233 kWh
Number of modules: 13
Battery module capacity: 17.92 kWh
Nominal voltage: 832 V
Operating voltage range: 728 V – 936 V
Discharge capacity: Max. 0.5 C
IP rating: IP54
Operating temperature: -30°C – +50°C
Installation: Outdoor
Advantages:
High storage capacity: The kit includes a 233 kWh storage system, sufficient to meet the energy requirements of large-scale installations, ensuring efficient long-term energy use.
Excellent efficiency: The 98.5% efficient inverter ensures rapid and efficient conversion of solar energy into usable electricity, minimising losses and maximising yield.
Complete protection: IP65 protection makes this kit extremely resistant to adverse weather conditions, making it ideal for outdoor installation, whilst surge protection and protection against incorrect connections provide additional safety.
Quick installation: The system’s simplified design allows for quick and efficient installation, significantly reducing commissioning time and costs.
Long-term durability: The kit operates within a temperature range of -30°C to +50°C, making it extremely durable and suitable for use in a variety of environmental conditions.
The 125 kW Inverter + 233 kWh Storage Kit from Kstar is the perfect solution for maximising the use of solar energy in large-scale projects. With a large storage capacity, IP65 protection and excellent efficiency, this system ensures consistent and reliable long-term performance, making it the ideal choice for commercial and industrial applications.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 12V 200Ah LiFePO4 battery – DATB12200 is a high-performance battery designed for applications requiring high power, excellent safety and a very long service life. With a total capacity of 2560Wh, this model is ideal for solar systems, caravans, boats, backup systems and industrial applications.
Thanks to LiFePO4 technology and the intelligent BMS, the battery offers advanced protection, high thermal stability and over 8,000 cycles, significantly outperforming AGM, GEL or lead-acid batteries.
It is an excellent solution for users who require constant power, heavy-duty operation and long-term reliability.
Key benefits
Over 8,000 cycles – extremely long service life
Very high discharge current: 200A
Maximum charging current: 100A
Ultra-safe LiFePO4 chemistry – stable and with no thermal risk
High efficiency: 95% at charge
Performance in extreme temperatures: -20°C to +65°C
Low weight for the capacity offered
Maintenance-free – no periodic procedures required
Compatible with solar systems and high-power UPS
Recommended applications
Off-grid / hybrid photovoltaic systems
Caravans and motorhomes
Boats and marine systems
Professional UPS and backup systems
Telecommunications
Industrial equipment
Camping, off-grid areas
Technical data – DATB12200
Feature
Value
Nominal voltage
12V – 12.8V
Nominal capacity
200Ah
Total energy
2560Wh
Cell type
LiFePO4 (LFP)
Cycle life
8,000 cycles
Maximum charging current
100A
Maximum discharge current
200A
Charging voltage
14.4V ±0.2V
Charging efficiency
95%
Discharge efficiency
90%
Charging temperature
0°C – 45°C
Operating temperature
-20°C – 65°C
Dimensions
50.5 × 24.5 × 24 cm
Battery weight
16.3 kg
Total package weight
17 kg
Battery type
Solid state
Brand
DATUBOSS
Model
DT12-200
BMS protection
Yes
User benefits
Perfect for high-capacity solar systems
Ensures stable long-term consumption
Ideal for off-grid homes, caravans or marine applications
Higher efficiency and lower total cost compared to lead-acid
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The STREND PRO screwdriver set for electricians is designed for safe and precise work on electrical installations. All screwdrivers are VDE-certified, making them suitable for use on live circuits, and the set also includes a voltage tester screwdriver, which is useful for quick checks.
Set contents (13 pieces):
Straight screwdrivers:
2 × 6.5 × 100 mm
1 × 5.5 × 100 mm
1 × 4 × 100 mm
1 × 3 × 100 mm
Phillips screwdrivers:
PH1 × 80 mm
PH2 × 100 mm
Pozidriv screwdrivers:
PZ1 × 80 mm
PZ2 × 100 mm
Torx screwdrivers:
T10 × 100 mm
T15 × 100 mm
T20 × 100 mm
Voltage tester screwdriver (single-pole)
Key features:
VDE certification for live working
Suitable for low-voltage electrical installations
Ergonomic handles for a secure and comfortable grip
Durable construction, for professional use
Benefits:
Enhanced safety during electrical work
Complete set for a variety of applications
Ideal for electricians, plumbers and service technicians
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT PROavr-15k Servo Motor Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT PROavr-15k automatic voltage stabiliser.
Protect your devices against power surges
In single-phase mode, each phase can operate independently of the others. Regardless of the mains load and fluctuations in the output voltage, the KEMOT PROavr-15 stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Regulation is automatic, ensuring high output voltage accuracy. A fault in the operation of one phase does not affect the operation of the others.
Three-phase mode
In three-phase mode, it is important to maintain balance between the phases. The stabiliser monitors and controls the voltage on each phase to ensure consistency between them – it will compensate for an input voltage that is too high or too low and will supply the output voltage once stabilised. If, in this mode, one of the phases is not functioning properly or is not connected, the unit will activate the protection circuit and will not supply output voltage, indicating this via the ‘PHASE ERROR’ indicator.
How does the KEMOT PROavr-15 voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain a set output voltage of 230 V. Its function is to increase an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permissible range and does not experience dangerous surges that could damage connected devices. The stabiliser’s design is based on a toroidal transformer, which ensures the device operates stably.
Servo-motor voltage stabiliser
The KEMOT PROavr-15 voltage stabiliser maintains the voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
BYPASS switch
The device is also equipped with a ‘bypass’ function, i.e. a switch that bypasses the stabiliser’s operation, allowing it to be isolated and enabling the home network to be powered without issues from an external source.
DELAY Function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT PROavr-15 is equipped with a DELAY switch button ranging from 6 to 180 seconds, which will reduce the risk of damage to the stabiliser when devices connected to it have a high inrush current. In addition, the KEMOT PROavr-15 stabiliser features protection against overvoltage and undervoltage, overload, overheating and short circuits.
Easy transport
To make it easier to move and position the KEMOT stabiliser in the right place, it is fitted with four sturdy wheels. Thanks to these, you can easily move the device to different locations, which will certainly make operation and maintenance easier.
Application
The KEMOT PROavr-15 can be used both at home and in the office. It is perfect for:
televisions and audio/video equipment;
speakers, mini audio systems and other audio/video devices;
household appliances such as induction hobs, microwaves, fridges and freezers;
computers, monitors, printers, cash registers and other office equipment;
furnaces and central heating pumps;
power generators.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The KEMOT URZ3426-15K 15kVA voltage stabiliser is designed to protect electrical equipment against voltage fluctuations in the mains supply. With a capacity of 15,000 VA (10,500 W) and high-precision stabilisation of ±3%, the device maintains a constant voltage of 230V, ensuring the safe and efficient operation of connected equipment.
This model uses servo-motor technology, which allows for continuous voltage regulation and offers much more precise stabilisation compared to relay-based stabilisers.
Continuous stabilisation with servo motor
The C.R.G.O. servo-motor and toroidal transformer control system allows for continuous adjustment of the output voltage. This technology ensures smooth operation and a precise response to fluctuations in the mains voltage.
High efficiency of 98% contributes to reduced energy losses and stable long-term operation.
Complete protection for electrical equipment
The stabiliser includes several protection systems to prevent damage to connected appliances:
short-circuit protection
surge protection
overheating protection
These features ensure safe operation of the equipment and a longer service life.
Recommended applications
The Kemot 15kVA voltage stabiliser is ideal for powering:
servers and IT equipment
industrial systems
sensitive electronic equipment
professional audio-video equipment
electrical installations in commercial buildings
laboratory equipment
General information
Model
URZ3426-15K
Power
15,000 VA
Actual power
10,500 W
Stabilisation type
Servo motor
Transformer
Toroidal C.R.G.O.
Electrical data
Input voltage
140 – 300 VAC
Input frequency
50 Hz
Output voltage
230 VAC
Output frequency
50 Hz
Stabilisation accuracy
±3%
Efficiency
98%
Output type
Single-phase
Sockets
2 sockets (German and French types)
Protections
Protections
Short circuit, overvoltage, overheating
Operating conditions
Operating temperature
0 – 40°C
Humidity
10 – 90%
Storage temperature
-15 – 45°C
Dimensions and weight
Dimensions
370 × 360 × 430 mm
Weight
47.5 kg
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
It is the ideal solution for the efficient distribution of high current in DC electrical systems. This busbar with two connection points ensures secure connections for batteries and equipment, facilitating efficient energy management.
Designed to withstand a maximum current of 150A and a voltage of up to 70 VDC, the busbar is made from durable materials, including stainless steel for the terminals. With a recommended torque of 7 N-m, the busbar provides a solid and secure hold.
It comes fitted with a cover secured by 10 screws, which provides additional protection for the connections, preventing potential accidents. Measuring 45 x 152.4 x 32 mm (with cover) and weighing 0.3 kg, the busbar integrates easily into any electrical system, making it ideal for marine and solar energy applications.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Busbars are essential for the efficient distribution of high current, ensuring secure connections for batteries and DC equipment. We offer a wide range of busbars, each with different current ratings and a variety of connection terminals, adaptable to the needs of your system.
Each busbar is fitted with a removable protective cover, ensuring the safety of the connections. With a maximum current of 150 A and a maximum voltage of 70 VDC, these busbars are made of stainless steel, guaranteeing durability and corrosion resistance.
With a recommended torque of 7 N·m, this busbar weighs 1 kg and measures 45 x 232 x 32 mm (with cover), making it suitable for various applications in the energy sector.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Busbars are essential for distributing high currents, ensuring secure connections for batteries and DC equipment. We offer a range of busbars, each with different current ratings and a variety of connection terminals. Each busbar is fitted with a removable protective cover for enhanced safety.
Technical Specifications:
Maximum current: 150 A
Maximum voltage: 70 VDC
Terminal material: Stainless steel
Recommended torque: 7 N·m
Weight: 0.3 kg
Dimensions (HxWxD) with cover: 45 x 152.4 x 32 mm
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Busbars are essential for distributing high currents, ensuring secure connections for batteries and DC equipment. We offer a wide range of busbars, each with different current ratings and varying numbers of connection terminals. Each busbar is fitted with a removable protective cover for added safety.
Technical Specifications:
Maximum current: 150 A
Maximum voltage: 70 VDC
Terminal material: Stainless steel
Recommended torque: 7 N-m
Weight: 0.3 kg
Dimensions (HxWxD) with cover: 45 x 152.4 x 32 mm
Busbars are ideal for applications where efficient current distribution and reliable connections are required.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The Victron Energy MEGA 150A/80V ceramic fuse is ideal for the effective protection of DC systems against overloads and short circuits. With a robust ceramic construction, this fuse offers superior resistance to high temperatures, making it perfect for applications involving high voltages and high currents. The set includes 5 fuses, for long-term use in solar systems, electric vehicles and industrial equipment.
Rated current: 150A
Maximum voltage: 80V
Material: Ceramic
Compatibility: DC systems, 48V and above
Pack: 5 pieces
