Description
UNI-T UTG2062B Function Generator
The UTG2062B arbitrary waveform generator is a modern dual-channel generator that utilises direct digital synthesis technology to produce a precise and stable arbitrary waveform output with a resolution of 1μHz, a maximum output frequency of 60 MHz, and a sampling rate of 320 MS/s. Signal modulation is available with various modulation types such as AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep, etc., from an internal or external source, via linear and logarithmic sweeping. The panel is ergonomically designed for easy operation. The generator is intended for use in the design, development, testing, troubleshooting and repair of electronic and electroacoustic devices, such as test circuits and devices in cellular and wireless systems, radio and television systems; testing of semiconductor components, etc. Thanks to DDS technology, it is capable of generating precise and clear signals with minimal distortion. An easy-to-use panel with simple operation and a clear display allows you to work much more efficiently and quickly. It features a USB interface and powerful software for data transfer to a computer. Over 160 waveforms are stored in the non-volatile internal memory, including mathematical, bioelectric, medical, trigonometric, anti-trigonometric, and automotive transient waveforms, etc. It offers excellent value for money and a wide range of functions. It can be used in university laboratories, research institutes, etc. This device meets the GB4793 safety requirements for electronic measuring instruments and the IEC 61010-1/2 safety standards, and complies with the CAT II 300V isolated voltage safety standards. Ability to connect both channels
- digital signal synthesis (DDS)
- generation of sinusoidal signals with a frequency ranging from 1μHz to 60MHz
- Generation of square-wave signals with a frequency range from 1 μHz to 60 MHz
- Generation of various other waveforms (sine, DC, noise, ramp, triangle, square, pulse) Modulation types: AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep
- use of modulation signals from internal and external sources
- ability to enter the signal waveform via a mathematical formula
- ability to enter the signal phase in degrees or radians - supports burst signal output in degrees or radians
- supports internal/external/manual triggering
- High-precision 6-bit frequency measurement up to 200MHz for TTL-compatible external signals
- Signal output amplitude up to 10Vpp at 50Ω impedance or up to 20Vpp in high-impedance mode
- Terminal protection against frequency overvoltage
201/20 MS
bit vertical resolution
- Ability to store up to 16 groups of variable digital waveforms
- Front-panel USB interface for waveform input
- USB Host interface on the rear panel, powerful PC software
- LAN connector on the rear panel for firmware updates
- Multifunction button and numeric keypad for easy operation of the system with LCD display
- FT
- FT4. High resolution
Technical specifications:
- Output channels: 2
- Sampling rate: 1.28 GS/s (interpolation), 320 MS/s (DDS mode)
- Output frequency: up to 60 MHz
- Frequency resolution: 1 μHz, vertical symbol
- Frequency resolution: 1 μHz (markings)
- Arbitrary waveform length: 8 pts to 16 Mpts
- Non-volatile memory: up to 160 groups of arbitrary waveforms can be stored
- Types and frequencies of generated signals:
sine: from 1μHz to 60MHz: from 1μHz to 60MHz: square: from 60MHz:
μHz:
μHz saw: ramp
from 1 μHz to 3 MHz
pulse: from 1 μHz to 20 MHz
any: from 1 μHz to 15 MHz
Gaussian noise: up to 60 MHz (-3 dB)
- DC signal offset (AC+DC peak): ± 5V (high impedance/±-10Ω)V (minimum 50V) rise/fall time of any signal: typically < 7ns
- amplitude range: 1 mVpp to 10 Vpp (50 Ω), 2 mVpp to 20 Vpp (High Z)
- modulation types: AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSKUM, QPSK, OSKUM, operation
modes: on/off output, continuous, modulation, sweep, serial
- TTL-compatible signal frequency measurement: yes, in the range 100mHz – 200MHz with an accuracy of ± 51 ppm
- output impedance: adjustable from 1Ω to 1kΩ, or short-circuit setting from 1Ω to 1kΩ, or short-circuit setting
-50, high output factor
-50 yes
- terminal overvoltage protection: at input voltage > ±12.0V, frequency <10kHz, amplitude > 100mVpp
- terminal overvoltage protection: at input voltage > ± 2.0V, frequency <10kHz, amplitude ≤100mVpp, total harmonic distortion 100mVpp
- (typical value): <0.2%
- Accuracy: ± 0.5 ppm at 25°C
- ageing rate in the first year: 1 ppm
- temperature coefficient: ± 0.5 ppm/°C
- temperature coefficient: ＜ 2 ppm/℃, LCD display with diagonal ＜ 2 ppm/℃:
- 4K, 4.0" FT, WVGA (480 x 272 pixels)
- USB device interface: yes
- Power supply: AC 100 V to 240 V, 45 Hz to 440 Hz, CAT II
- Power consumption: <50W
- Protection: 250 V fuse, 2 A
- 2 kg, 305 x 230 x 93 mm
- Product colour: white and grey
Contents of individual package:
- UTG2062B function generator: 1 pc
- Power cable: 1 pc
- USB interface cable: 1 pc
- manual
- (BNC cable
- 1 pc
- 1 pc
Packaging for wholesale customers:
- standard quantity per box: 2 pcs
- standard box dimensions: 380 x 330 x 320 mm
- gross weight of box: approx. 8.5 kg
MANUFACTURER: UNI-TREND
