10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The UNILIVING HYBRID S smart system allows you to maximise energy savings by choosing to use the heat pump or the boiler, or both at the same time, depending on the outside temperature and their respective efficiency levels. The hybrid system is managed by the hybrid control unit. The system allows for the production of domestic hot water and the heating of rooms at minimum and maximum temperatures.
The new UNISPLIT_HS, by utilising inverter technology alongside brushless DC motors, ensures high overall energy efficiency, both in terms of reducing the specific consumption of each motor and its high modulation capacity. The widespread use of these technologies across all components ensures improved COP and EER, and a substantial increase in efficiency at partial loads (ESEER).
Outdoor air temperature 7°C, 85% RH; EWT 30°C, LWT 35°C
Outdoor air temperature 7°C, 85% R.H.; EWT 40°C, LWT 45°C
Outdoor air temperature 35° DB; EWT 23°, LWT 18°
Outdoor air temperature 35° DB; EWT 12°, LWT 7°
Seasonal energy efficiency class for space heating tested under average climatic conditions.
Noise level tested under average climatic conditions
Heating: outdoor air temperature 7° DB, 6° WB; EWT 47°, LWT 55°;
Cooling: outdoor air temperature 35° DB, 24° WB; EWT 12°, LWT 7°.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The UNILIVING HYBRID S smart system allows you to maximise energy savings by choosing to use the heat pump or the boiler, or both at the same time, depending on the outside temperature and their respective efficiency levels. The hybrid system is managed by the hybrid control unit. The system allows for the production of domestic hot water and the heating of rooms at minimum and maximum temperatures.
The new UNISPLIT_HS, by utilising inverter technology alongside brushless DC motors, ensures high overall energy efficiency, both in terms of reducing the specific consumption of each motor and its high modulation capacity. The widespread use of these technologies across all components ensures improved COP and EER, and a substantial increase in efficiency at partial loads (ESEER).
Outdoor air temperature 7°C, 85% RH; EWT 30°C, LWT 35°C
Outdoor air temperature 7°C, 85% R.H.; EWT 40°C, LWT 45°C
Outdoor air temperature 35° DB; EWT 23°, LWT 18°
Outdoor air temperature 35° DB; EWT 12°, LWT 7°
Seasonal energy efficiency class for space heating tested under average climatic conditions.
Noise level tested under average climatic conditions
Heating: outdoor air temperature 7° DB, 6° WB; EWT 47°, LWT 55°;
Cooling: outdoor air temperature 35° DB, 24° WB; EWT 12°, LWT 7°.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The UNILIVING HYBRID S smart system allows you to maximise energy savings by choosing to use the heat pump or the boiler, or both at the same time, depending on the outside temperature and their respective efficiency levels. The hybrid system is managed by the hybrid control unit. The system allows for the production of domestic hot water and the heating of rooms at minimum and maximum temperatures.
The new UNISPLIT_HS, by utilising inverter technology alongside brushless DC motors, ensures high overall energy efficiency, both in terms of reducing the specific consumption of each motor and its high modulation capacity. The widespread use of these technologies across all components ensures improved COP and EER, and a substantial increase in efficiency at partial loads (ESEER).
Outdoor air temperature 7°C, 85% RH; EWT 30°C, LWT 35°C
Outdoor air temperature 7°C, 85% R.H.; EWT 40°C, LWT 45°C
Outdoor air temperature 35° DB; EWT 23°, LWT 18°
Outdoor air temperature 35° DB; EWT 12°, LWT 7°
Seasonal energy efficiency class for space heating tested under average climatic conditions.
Noise level tested under average climatic conditions
Heating: outdoor air temperature 7° DB, 6° WB; EWT 47°, LWT 55°;
Cooling: outdoor air temperature 35° DB, 24° WB; EWT 12°, LWT 7°.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The UNILIVING HYBRID S smart system allows you to maximise energy savings by choosing to use the heat pump or the boiler, or both at the same time, depending on the outside temperature and their respective efficiency levels. The hybrid system is managed by the hybrid control unit. The system allows for the production of domestic hot water and the heating of rooms at minimum and maximum temperatures.
The new UNISPLIT_HS, by utilising inverter technology alongside brushless DC motors, ensures high overall energy efficiency, both in terms of reducing the specific consumption of each motor and its high modulation capacity. The widespread use of these technologies across all components ensures improved COP and EER, and a substantial increase in efficiency at partial loads (ESEER).
Outdoor air temperature 7°C, 85% RH; EWT 30°C, LWT 35°C
Outdoor air temperature 7°C, 85% R.H.; EWT 40°C, LWT 45°C
Outdoor air temperature 35° DB; EWT 23°, LWT 18°
Outdoor air temperature 35° DB; EWT 12°, LWT 7°
Seasonal energy efficiency class for space heating tested under average climatic conditions.
Noise level tested under average climatic conditions
Heating: outdoor air temperature 7° DB, 6° WB; EWT 47°, LWT 55°;
Cooling: outdoor air temperature 35° DB, 24° WB; EWT 12°, LWT 7°.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The UNILIVING HYBRID S smart system allows you to maximise energy savings by choosing to use the heat pump or the boiler, or both at the same time, depending on the outside temperature and their respective efficiency levels. The hybrid system is managed by the hybrid control unit. The system allows for the production of domestic hot water and the heating of rooms at minimum and maximum temperatures.
The new UNISPLIT_HS, by utilising inverter technology alongside brushless DC motors, ensures high overall energy efficiency, both in terms of reducing the specific consumption of each motor and its high modulation capacity. The widespread use of these technologies across all components ensures improved COP and EER, and a substantial increase in efficiency at partial loads (ESEER).
Outdoor air temperature 7°C, 85% RH; EWT 30°C, LWT 35°C
Outdoor air temperature 7°C, 85% R.H.; EWT 40°C, LWT 45°C
Outdoor air temperature 35° DB; EWT 23°, LWT 18°
Outdoor air temperature 35° DB; EWT 12°, LWT 7°
Seasonal energy efficiency class for space heating tested under average climatic conditions.
Noise level tested under average climatic conditions
Heating: outdoor air temperature 7° DB, 6° WB; EWT 47°, LWT 55°;
Cooling: outdoor air temperature 35° DB, 24° WB; EWT 12°, LWT 7°.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Pannello completamente accessoriato per la protezione e la commutazione di una stringa fotovoltaica in corrente continua. Contiene tutti i componenti essenziali per un funzionamento sicuro ed efficiente ed è pronto per l'installazione.
Consigliato per impianti fotovoltaici di piccole dimensioni (1 stringa)Grado di protezione IP65 – resistente alla polvere e all'umidità Include tutti i componenti conformi agli standard DCsolar
Contenuto del pannello:
Blocco fusibili 2P + 1 fusibile gPV
Scaricatore di sovratensione CC 1100 V (T2) – 1 pz
Interruttore fotovoltaico a 4 poli 32 A 1000 V CC – 1 pz
Custodia IP65 resistente ai raggi UV, per montaggio a superficie – 1 pz
Pressacavi – 4 pz
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT SER-10000-S Automatic Voltage Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices suddenly switching off or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT SER-10000-S automatic voltage stabiliser.
Protect your devices from power surges
Regardless of the mains load and fluctuations in the output voltage, the KEMOT SER-10000-S stabiliser maintains them at 230 V ±8%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Adjustment is automatic, ensuring high precision of the output voltage. The KEMOT SER-10000-S is suitable for use at home or in the office, being ideal for televisions and audio-visual equipment, as well as speakers, mini-stereo systems and other audio/video devices or computers.
How does the SER-10000-S voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain the set output voltage of 230 V. Its function is to boost an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permitted range and to prevent dangerous voltage spikes that could damage connected devices. The stabiliser’s design is based on a toroidal transformer, which ensures the device operates stably.
DELAY function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT SER-10000-S is fitted with a DELAY start-up delay button with a range of 6 to 180 seconds, which reduces the risk of damage when devices connected to it have a high instantaneous start-up current. In addition, the SER-10000-S stabiliser features protection against overvoltage, undervoltage, overload, overheating and short circuits.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT PROavr-10k Servomotor Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT PROavr-10k automatic voltage stabiliser.
Protect your devices against power surges
In single-phase mode, each phase can operate independently of the others. Regardless of the mains load and fluctuations in the output voltage, the KEMOT PROavr-10 stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Regulation is automatic, ensuring high precision of the output voltage. A fault in the operation of one phase does not affect the operation of the others.
Three-phase mode
In three-phase mode, it is important to maintain balance between the phases. The stabiliser monitors and controls the voltage on each phase to ensure consistency between them – it will compensate for an input voltage that is too high or too low and supply the output voltage once stabilised. If, in this mode, one of the phases is not functioning properly or is not connected, the unit will activate the protection circuit and will not supply output voltage, indicating this via the ‘PHASE ERROR’ indicator.
How does the KEMOT PROavr-10 voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain a set output voltage of 230 V. Its function is to increase an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permissible range and does not experience dangerous surges that could damage connected devices. The stabiliser’s design is based on a toroidal transformer, which ensures the device operates stably.
Servo-motor voltage stabiliser
The KEMOT PROavr-10 voltage stabiliser maintains the voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
BYPASS switch
The device is also equipped with a ‘bypass’ function, i.e. a switch that bypasses the stabiliser’s operation, allowing it to be isolated and enabling the home network to be powered without issues from an external source.
DELAY Function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT PROavr-10 is equipped with a DELAY switch button that ranges from 6 to 180 seconds, which will reduce the risk of damage to the stabiliser when devices connected to it have a high instantaneous start-up current. In addition, the KEMOT PROavr-10 stabiliser features protection against overvoltage and undervoltage, overload, overheating and short circuits.
Easy transport
To make it easier to move and position the KEMOT stabiliser in the right place, it is fitted with four sturdy wheels. Thanks to these, you can easily move the device to different locations, which will certainly make operation and maintenance easier.
Application
The KEMOT PROavr-10 can be used both at home and in the office. It is perfect for:
televisions and audio/video equipment;
speakers, mini audio systems and other audio/video devices;
household appliances such as induction hobs, microwaves, fridges and freezers;
computers, monitors, printers, cash registers and other office equipment;
furnaces and central heating pumps;
power generators.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The KEMOT URZ3426-10K 10kVA voltage stabiliser is designed to protect electrical equipment against voltage fluctuations in the mains supply. With a capacity of 10,000 VA (7,000 W) and servo-motor technology, this stabiliser offers precise and continuous voltage regulation, maintaining the output at 230V ±3%.
The device is ideal for equipment sensitive to voltage fluctuations, such as IT systems, industrial equipment, electronic devices or critical power supply systems.
Precise stabilisation with servo motor
Unlike relay-based stabilisers, the URZ3426-10K model utilises servo-motor technology, which allows for continuous voltage regulation by moving a contact on the toroidal transformer. This system offers more precise stabilisation and smoother operation, without sudden switching.
The C.R.G.O. toroidal transformer ensures stable and efficient operation, with low losses and an efficiency of up to 98%.
Complete protection for connected appliances
The stabiliser is equipped with multiple protection systems to prevent damage to equipment:
short-circuit protection
overvoltage protection
overheating protection
These features contribute to the safety of connected equipment and the stable operation of the electrical system.
Recommended applications
The Kemot 10kVA voltage stabiliser is suitable for powering:
servers and IT equipment
security and surveillance systems
industrial equipment
sensitive electronic equipment
professional audio-video systems
electrical appliances in homes or offices
General information
Model
URZ3426-10K
Power
10,000 VA
Actual power
7000 W
Stabilisation type
Servo motor
Transformer
Toroidal C.R.G.O.
Electrical data
Input voltage
130 – 260 VAC
Input frequency
50 Hz
Output voltage
230 VAC
Output frequency
50 Hz
Stabilisation accuracy
±3%
Efficiency
98%
Output type
Single-phase
Sockets
2 sockets (German and French type)
Protections
Protections
Short circuit, overvoltage, overheating
Operating conditions
Operating temperature
0 – 40°C
Relative humidity
10 – 90%
Storage temperature
-15 – 45°C
Dimensions and weight
Dimensions
388 × 302 × 210 mm
Weight
22 kg
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Voltage fluctuations in industrial power networks can cause unplanned shutdowns, equipment failure or production losses. The KEMOT PROAVR-100K 100kVA voltage stabiliser is designed for industrial and commercial applications where a stable and reliable power supply is required.
The device maintains the output voltage at 400V ±3%, compensating for mains variations and protecting connected equipment against voltage fluctuations.
Servo-motor technology for precise stabilisation
The stabiliser utilises servo-motor technology, which allows for continuous and highly precise adjustment of the output voltage. The system is built around a C.R.G.O. toroidal transformer, renowned for its high efficiency and stable operation.
With an efficiency of up to 98%, the stabiliser ensures minimal energy loss and high performance in continuous operation.
Intelligent control and monitoring system
The model is equipped with an LCD display, which allows monitoring of the system’s operating parameters. In addition, the stabiliser features a start-up delay function (6 / 180 seconds) to protect connected equipment against inrush currents.
Complete protection for industrial equipment
For maximum safety, the stabiliser offers multiple protection systems:
overload protection
short-circuit protection
overvoltage protection
undervoltage protection
overheating protection
The intelligent cooling system starts automatically at 30% of the rated load and stops at 20%, optimising energy consumption and the equipment’s service life.
Recommended applications
The 100kVA three-phase stabiliser is ideal for:
industrial halls
manufacturing facilities
servers and data centres
sensitive industrial equipment
commercial buildings and critical infrastructure
General information
Model
PROAVR-100K
Rated power
100,000 VA (100 kVA)
Stabilisation type
Servo motor
Transformer
Toroidal C.R.G.O.
Indicator
LCD display
Electrical data
Input voltage range
252 – 520 V AC
Minimum start-up voltage
252 V
Output voltage
400 V
Minimum output voltage
310 V
Phases
1 / 3 phases
Stabilisation accuracy
±3%
Efficiency
98%
Frequency
50 / 60 Hz
Protections
Protections
Overload, short circuit, overvoltage, undervoltage, overheating
Operating conditions
Operating temperature
0 – 40°C
Humidity
10 – 102%
Storage temperature
-15°C – 45°C
Dimensions and weight
Dimensions
805 × 390 × 1160 mm
Weight
198 kg
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
La barra collettrice Victron Energy è progettata per il collegamento sicuro ed efficiente di un massimo di 5 fusibili CIP da 100, 200 o 500 A. Assicura una distribuzione ottimale della corrente nelle applicazioni in corrente continua, quali impianti a batteria e apparecchiature elettriche ad alta potenza. La barra collettrice è realizzata con materiali durevoli e resistenti alla corrosione ed è ideale per l'impiego in applicazioni industriali, nautiche o automobilistiche.
Compatibilità
: fusibili CIP da 100 A, 200 A, 500 A
Numero di terminali
: 5
Corrente massima
: 500 A
Materiale
: Acciaio inossidabile e rame stagnato
Applicazioni
: sistemi di batterie, apparecchiature marine, veicoli elettrici
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
La barra collettrice Victron Energy è progettata per il collegamento efficiente di un massimo di 6 fusibili CIP con portate comprese tra 100 A e 1500 A. Assicura una distribuzione affidabile della corrente negli impianti a batteria e nelle apparecchiature a corrente continua, rendendola ideale per applicazioni ad alta potenza quali quelle industriali, automobilistiche e nautiche. La robusta struttura in acciaio inossidabile e rame stagnato garantisce durata e resistenza in ambienti difficili.
Compatibilità
: fusibili CIP da 100 A, 200 A, 1500 A
Numero di terminali
: 6
Corrente massima
: 1500 A
Materiale
: Acciaio inossidabile e rame stagnato
Applicazioni
: sistemi industriali, nautici e veicoli elettrici
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT MSER-1000 Servomotor Voltage Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices shutting down suddenly or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT MSER-1000 automatic voltage stabiliser.
Protect your devices from power surges
Regardless of the mains load and fluctuations in the output voltage, the KEMOT MSER-1000 stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Adjustment is automatic, ensuring high precision of the output voltage. The KEMOT MSER-1000 is suitable for use at home or in the office, being ideal for televisions and audio-visual equipment, as well as speakers, mini-stereo systems and other audio/video devices or computers.
How does the MSER-1000 voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain the set output voltage of 230 V. Its function is to increase an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permitted range and does not experience dangerous surges that could damage connected devices. The stabiliser’s design is based on a transformer, which ensures the device operates stably.
Servo-motor voltage stabiliser
The KEMOT MSER-1000 voltage stabiliser maintains the voltage with high precision of up to 3%. Such high operational precision is the result of using servo-based technology.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
KEMOT SER-1000 Voltage Stabiliser
Although the voltage is normally 230 V, there are often situations where it is unstable. This can result in devices suddenly switching off or malfunctioning, which reduces the lifespan of electronic devices. Therefore, to avoid such situations, it is worth considering the KEMOT SER-1000 automatic voltage stabiliser.
Protect your devices from power surges
Regardless of the mains load and fluctuations in output voltage, the KEMOT SER-1000 stabiliser maintains them at 230 V ±3%, enabling the efficient operation of all devices, including those sensitive to mains voltage quality. Adjustment is automatic, ensuring high precision of the output voltage. The KEMOT SER-1000 is suitable for use at home or in the office, being ideal for televisions and audio-visual equipment, as well as speakers, mini-stereo systems and other audio/video devices or computers.
How does the SER-1000 voltage stabiliser work?
The KEMOT voltage stabiliser is a device designed to maintain the set output voltage of 230 V. Its function is to boost an input voltage that is too low or to reduce the input voltage, so that the output voltage remains within the permitted range and does not experience dangerous surges that could damage connected devices. The stabiliser’s design is based on a toroidal transformer, which ensures the device operates stably.
DELAY function
If you need a voltage stabiliser for devices with a high instantaneous inrush current, choose a model equipped with the DELAY start-up delay function. The KEMOT SER-1000 is equipped with a DELAY start-up delay button with a range of 6 to 180 seconds, which reduces the risk of damage when devices connected to it have a high instantaneous start-up current. In addition, the SER-1000 stabiliser features protection against overvoltage, undervoltage, overload, overheating and short circuits.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Il set di fusibili MIDI da 100 A e 32 V è progettato per proteggere i circuiti elettrici in corrente continua da sovraccarichi e cortocircuiti. Questi fusibili sono indispensabili per applicazioni automobilistiche, nautiche e industriali, garantendo una protezione affidabile per le apparecchiature sensibili. Ogni confezione contiene 5 fusibili, assicurandone la disponibilità per la manutenzione e le riparazioni di emergenza.
Corrente nominale
: 100 A
Tensione massima
: 32 V
Tipo di fusibile
: MIDI
Confezione
: 5 pezzi
Applicazione
: automobilistica, nautica, industriale
Questi fusibili di alta qualità sono essenziali per garantire il funzionamento sicuro degli impianti elettrici.
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Il fusibile MIDI da 100 A e 58 V è progettato specificamente per proteggere le apparecchiature elettriche a 48 V da sovraccarichi e cortocircuiti. Questo fusibile singolo è ideale per applicazioni che richiedono una protezione sicura e affidabile nei sistemi a corrente continua, garantendo un elevato livello di protezione e durata.
Corrente nominale
: 100 A
Tensione massima
: 58 V
Tipo di fusibile
: MIDI
Compatibilità
: prodotti a 48 V
Confezione
: 1 pezzo
Ideale per impianti a energia rinnovabile e altre applicazioni che operano ad alta tensione, questo fusibile MIDI è indispensabile per la protezione ottimale dei dispositivi elettrici.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
L'interruttore automatico ETIMAT 6 di ETI è progettato per garantire una protezione efficace dei circuiti elettrici contro sovraccarichi e cortocircuiti. Con una capacità di interruzione di 6 kA e una caratteristica di intervento di tipo B, questo dispositivo assicura una protezione rapida e affidabile in applicazioni residenziali e commerciali.
Specifiche tecniche:
Codice prodotto: 002111514
Corrente nominale: 10 A
Caratteristica di intervento: B
Numero di poli: 1P
Tensione nominale: 230/400 V CA
Frequenza nominale: 50/60 Hz
Capacità di interruzione: 6 kA
Tensione nominale di isolamento (Ui): 500 V
Tensione nominale di tenuta agli impulsi (Uimp): 6 kV
Grado di protezione: IP20
Montaggio: su guida DIN da 35 mm (1 modulo)
Dimensioni (larghezza x altezza x profondità): 18 x 85 x 73 mm
Peso: 0,103 kg
Sezione del conduttore: 1…25 mm²
Norma: EN/IEC 60898-1, 60947-2
Vantaggi:
Protezione affidabile: garantisce una rapida disconnessione in caso di sovraccarico o cortocircuito.
Design compatto: occupa uno spazio minimo nel quadro elettrico.
Facile installazione: montaggio su guida DIN standard.
Durata: struttura robusta, conforme alle norme internazionali.
Questo interruttore automatico è ideale per la protezione di circuiti monofase in impianti elettrici residenziali e commerciali, garantendo sicurezza e affidabilità durante il funzionamento.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
This robust and efficient torch is ideal for a wide range of applications, featuring a state-of-the-art SMD LED chip. With a power output of 10W, it delivers an impressive light output of 1000 lumens, ensuring excellent illumination in total darkness. The casing is made from aluminium alloy, making it strong and durable, with a matt black finish that adds a stylish look.
Technical details include a 3.7V 2000mAh battery, which allows for extended runtime and a charging time of approximately 4.5 hours. The torch has an IP54 rating, making it protected against dust and water splashes, which makes it suitable for use in various weather conditions. The torch also turns on instantly, in just 0.001 seconds, providing maximum brightness as soon as it is switched on.
Built to operate in temperatures ranging from -20°C to +45°C, this torch is an excellent choice for outdoor activities, camping or professional use. Its durability, efficiency and high-quality performance make it ideal for anyone looking for a reliable and powerful lighting solution.
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The EXTOL PREMIUM combination screwdriver set is designed for professional use, offering a practical combination of VDE-insulated and non-insulated screwdrivers, along with a voltage tester. It is the ideal solution for electricians and technicians who need flexibility, safety and durability in a single set.
The screwdrivers are made from CrV steel with a matt finish, and the ergonomic handles, made from PP plastic and covered with non-slip TPR rubber, ensure greater torque and excellent control during use.
Key features:
Combination set: VDE-insulated + non-insulated screwdrivers
VDE insulation for live work up to 1000 V
CrV steel shaft, matt finish
Ergonomic handle made of PP + non-slip TPR
Increases tightening torque and user comfort
Includes a practical fabric pouch for transport and storage
Set contents (12 pieces):
Non-insulated screwdrivers:
(-) 3.5 × 75 mm
(-) 5.5 × 100 mm
(-) 6.5 × 125 mm
PH1 × 100 mm
PH2 × 125 mm
VDE-insulated screwdrivers (up to 1000 V):
(-) 3.5 × 75 mm
(-) 4 × 100 mm
(-) 5.5 × 125 mm
PH1 × 80 mm
PH2 × 100 mm
Accessories:
Voltage tester (-) 3 × 65 mm
Polyesterfabric case
Material: CrV
Benefits:
Complete set for electrical and mechanical work
Enhanced safety thanks to VDE screwdrivers
Easy organisation and transport
Durability and reliability EXTOL PREMIUM
Ideal for professional electricians and technical service
10 - 20 days
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
LiFePO4 12.8 V 100 Ah battery – the LFP12100SDHY MINI COMPACT model from Ronic Energy, equipped with Bluetooth and LTCP (Low-Temperature Charging Protection). It has a capacity of 1280 Wh, an exceptionally compact design (230×145×215 mm, weighing just 9.25 kg) and monitoring via a mobile app (Android/iOS).
Key benefits:
Extended lifespan – over 6000 cycles at 80% DoD (~10 years)
LTCP protection – automatic charging stops below 0°C, for LiFePO4 safety
Bluetooth & Smart LCD – view voltage, temperature, charge level and control via the app
100 A BMS rated current – protection against overcurrent, short circuit, overvoltage and temperature
Compact & durable – ideal for caravans, motorhomes, boats or off-grid solar systems
Technical details (model LFP12100SDHY MINI COMPACT):
Nominal voltage: 12.8 V
Capacity: 100 Ah / 1280 Wh
Charging voltage: 14.6 V
Operating temperatures: charging +1 °C – +50 °C, discharging –20 °C – +50 °C
Dimensions/Weight: 230×145×215 mm / 9.25 kg
Connectors: M6, ABS casing, BMS with LCD, Bluetooth, LTCP
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
The 12.8 V 200 Ah LiFePO4 battery – model LFP12200SDSG from Ronic Energy, featuring Bluetooth and LTCP (Low-Temperature Charging Protection), is the ideal solution for smart energy storage in caravans, motorhomes, boats or off-grid solar systems. With a capacity of 2560 Wh, a BMS with multiple protections (overcurrent, short-circuit, overvoltage, temperature), a Smart LCD screen, and the ability to monitor and control parameters in real time via an Android/iOS app, it offers increased autonomy and safety.
Key advantages:
Long service life: over 6,000 cycles at 80% DoD (~10 years of use)
LTCP protection – automatic charging shutdown below 0°C to protect the cells
Bluetooth monitoring – view voltage, charge level, temperature and current directly in the app
Robust performance – BMS up to 200 A continuous, vibration and shock resistance
Lightweight and efficient – high energy density and optimal weight compared to traditional lead-acid batteries
Technical details:
Voltage: 12.8 V
Capacity: 200 Ah / 2560 Wh
Cut-off voltage: 14.6 V
Operating temperatures: charging +1°C to +50°C, discharging –20°C to +50°C
Dimensions: 525 × 245 × 230 mm, weight: 20.55 kg
M8 connectors, LCD display, Bluetooth 5.0, LTCP, multiple BMS protections
In stock
Contact us at contact@solartech.eu for more info regarding the inventory of this product.
Technical specifications
Light colour: Neutral
Colour temperature: 4000K
Luminous flux: 1200 lm
Beam angle: 120°
IP rating: IP65 (water and dust resistant)
Start-up time: Instant, 0.001 seconds
Operating conditions: -20°C to +60°C
Housing details
Material: Aluminium
Housing colour: Black
Dimensions: 235x55x180mm
Product weight: 2.12 kg
Certifications & standards
Certifications: CE, EMC, ROHS
General information
LED type: SMD
Warranty: 2 years
This solar LED floodlight is ideal for efficient outdoor lighting, with a neutral 4000K light, a luminous flux of 1200 lm and an IP65 protection rating.
