Descripción
⚠️ Stock availability and the delivery time for products held in the supplier’s stock must be confirmed by phone.
Download the datasheet
The Victron Energy MultiPlus-II GX 48/6k5/100-50 is a multifunctional inverter/charger designed for 48V battery systems. It combines a sine wave inverter, a battery charger and a GX device for system monitoring and control in a single enclosure.
With a continuous output power of 6kW at 25°C and a peak power of up to 11kW, the unit can support residential loads, off-grid installations, mobile systems and professional applications. The built-in charger can deliver up to 100A, depending on the operating temperature and system configuration.
In the event of a grid outage or generator disconnection, the MultiPlus-II GX automatically switches to battery power. The main AC output can continue supplying critical loads, while the 32A auxiliary output is intended for equipment that should operate only when an AC source is available.
Integrated GX monitoring
The built-in GX device simplifies system integration and monitoring. Battery, inverter and compatible solar charge controller parameters can be viewed locally on the two-line display or remotely through the Victron Remote Management platform – VRM.
The system can be connected to the network via Wi-Fi or Ethernet and provides USB, VE.Direct and BMS-CAN interfaces for integrating compatible equipment.
PowerControl and PowerAssist
The PowerControl function allows a limit to be set for the current drawn from the grid or generator. When the installation’s power consumption increases, the MultiPlus-II GX can automatically reduce the current used for battery charging, helping prevent the AC source from being overloaded.
With PowerAssist, energy stored in the batteries can temporarily supplement the power available from the grid or generator. Once consumption decreases, the available surplus is used to recharge the batteries.
Expandable configurations
Multiple MultiPlus-II units can be configured in parallel to increase system output power and charging capacity. The product can also be used in three-phase installations. Only one unit with GX functionality is required in a parallel or three-phase system.
Main features
- Sine wave inverter and battery charger in a single unit
- Nominal battery system voltage: 48V
- Continuous output power: 6kW at 25°C
- Peak power: 11kW for one minute
- Maximum charging current: 100A at 25°C
- Built-in 50A transfer switch
- Two AC outputs, including a 32A auxiliary output
- PowerControl and PowerAssist functions
- Local monitoring via the GX display
- Remote monitoring and configuration via VRM
- Parallel and three-phase operation capability
- Programmable relay and remote on/off control
Recommended applications
- Photovoltaic systems with battery storage
- Off-grid installations
- Backup power systems
- Homes and commercial premises
- Motorhomes and specialist vehicles
- Boats
- Generator-powered systems
- Single-phase, parallel or three-phase installations
Technical specifications
| Feature |
Specification |
| Manufacturer |
Victron Energy |
| Model |
MultiPlus-II GX 48/6k5/100-50 |
| Product type |
Inverter/charger with integrated GX system |
| Battery voltage |
48V |
| DC input voltage range |
38–60V |
| AC output voltage |
230V ±2% |
| Output frequency |
50Hz ±0.1%, adjustable to 60Hz |
| Continuous output power at 25°C |
6kW |
| Continuous output power at 40°C |
5.7kW |
| Continuous output power at 65°C |
4.6kW |
| Time-limited power |
6.5kW for up to 4 hours; 8kW for up to one hour from a cold start |
| Peak power |
11kW for one minute |
| Maximum feed-in power |
6kW |
| Maximum efficiency |
96% |
| Zero-load power |
28W |
| Zero-load power in AES mode |
18W |
| Zero-load power in Search mode |
8W |
| AC input voltage |
187–265V |
| AC input frequency |
45–65Hz |
| Maximum AC input current |
50A |
| Transfer switch |
50A |
| Maximum charging current at 25°C |
100A |
| Maximum charging current at 40°C |
95A |
| Absorption voltage |
57.6V |
| Float voltage |
55.2V |
| Storage voltage |
52.8V |
| Auxiliary output |
Yes, 32A |
| Interfaces |
BMS-CAN, USB, Ethernet, VE.Direct, Wi-Fi |
| VE.Bus communication |
Yes |
| External current sensor |
100A, optional |
| Programmable relay |
Yes |
| Remote on/off |
Yes |
| Operating temperature |
-40°C to +65°C |
| Maximum humidity |
95%, non-condensing |
| Maximum altitude |
2,000m |
| Protection rating |
IP21 |
| Enclosure material |
Steel |
| Colour |
Blue, RAL 5012 |
| Dimensions |
644 × 320 × 150mm |
| Weight |
29kg |
Battery compatibility
The MultiPlus-II GX can be configured for lithium, lead-acid, zinc-bromine and other compatible battery technologies. The charger parameters must be configured according to the battery manufacturer’s requirements.
For CAN-managed batteries, the BMS-CAN port is intended for compatible models that communicate at 500kbps. It should not be confused with a standard VE.Can port.
Compatibility depends on the battery model, BMS protocol and firmware version. We recommend checking the system configuration before purchase.
Protections
The product includes protection against:
- Output short circuit
- Overload
- Excessively high battery voltage
- Excessively low battery voltage
- Excessive temperature
- AC voltage present at the inverter output
- Excessive input voltage ripple
Optional accessories
- 100A external current sensor
- Battery temperature sensor
- Victron GX GSM modem
- Digital Multi Control panel
- GSM antenna and GPS antenna
- Compatible Victron equipment for system expansion
