Beschreibung
Download Datasheet
Download Manual
Download Certificate
The Deye SE-F12 battery is a Low Voltage energy storage solution designed for residential photovoltaic systems and applications that require high storage capacity in a compact format.
The model provides a nominal energy of 12.03 kWh, a capacity of 235 Ah and a nominal voltage of 51.2 V, using LiFePO4 technology, known for its thermal stability, high level of safety and long service life.
High Capacity and High Performance
The Deye SE-F12 is designed for Low Voltage systems with an operating voltage range of 44.8 V to 57.6 V.
The battery can provide a maximum continuous charge/discharge current of up to 230 A, while for short-duration peak demand it can reach up to 280 A for 10 seconds. Actual operating current may vary depending on temperature and battery state of charge.
Modular and Scalable System
For installations requiring higher storage capacity, the Deye SE-F12 supports the parallel connection of up to 32 modules in the standard configuration.
By using a CAN-Bridge, the system can be expanded to up to 64 batteries in parallel, allowing the storage capacity to be adapted to the energy requirements of the project.
Smart Monitoring
The battery features CAN 2.0, RS485 and Bluetooth communication and is compatible with the Deye application for local monitoring of operating parameters.
The system includes LED indicators for state of charge, operation and protection status, as well as an audible buzzer warning.
Long Service Life
LiFePO4 technology and the intelligent Battery Management System contribute to a long operating life.
Deye specifies at least 6,000 cycles for the SE-F12 under the manufacturer's defined test conditions and recommends a 90% Depth of Discharge (DoD).
Flexible Installation
The Deye SE-F12 can be installed:
- wall-mounted;
- floor-mounted;
- in a stackable configuration.
The battery has an IP21 protection rating and is intended for installation in indoor areas protected from moisture and weather conditions. The charging temperature range is 0°C to +55°C, while discharging can take place between -20°C and +55°C.
The dimensions of the current model are approximately 400 × 559 × 233 mm, with a weight of approximately 84 kg.
Warranty and Certifications
The product is listed by Deye with UN38.3, CE and CB certifications. According to the current Deye documentation, the warranty period is 10 years, subject to the applicable warranty policy, market and installation conditions.
| Technical Specifications |
| Manufacturer |
Deye |
| Model |
SE-F12 |
| System Type |
Low Voltage (LV) |
| Battery Technology |
LiFePO4 (LFP) |
| Capacity |
235 Ah |
| Nominal Energy |
12.03 kWh |
| Nominal Voltage |
51.2 V |
| Operating Voltage Range |
44.8 – 57.6 V |
| Recommended Charge/Discharge Current |
115 A |
| Maximum Continuous Charge Current |
230 A |
| Maximum Continuous Discharge Current |
230 A |
| Peak Current |
280 A / 10 seconds |
| Recommended Depth of Discharge |
90% DoD |
| Cycle Life |
≥ 6,000 cycles |
| Standard Scalability |
Max. 32 units in parallel |
| Scalability with CAN-Bridge |
Max. 64 units in parallel |
| Communication |
CAN 2.0, RS485, Bluetooth + APP |
| Indicator |
LED (SOC, operation, protection) + buzzer |
| Protection Rating |
IP21 |
| Charging Temperature |
0°C ~ +55°C |
| Discharging Temperature |
-20°C ~ +55°C |
| Storage Temperature |
0°C ~ +35°C |
| Relative Humidity |
95% (non-condensing) |
| Maximum Altitude |
≤ 3000 m |
| Installation |
Wall / Floor / Stackable |
| Dimensions (W × H × D) |
400 × 559 × 233 mm |
| Weight |
Approx. 84 kg |
| Energy Throughput |
37 MWh |
| Certifications |
UN38.3, CE, CB |
| Warranty |
10 years* |
*Warranty is subject to Deye's applicable warranty terms and conditions.
Important: Installation and commissioning must be carried out by qualified personnel in accordance with the manufacturer's instructions and applicable electrical regulations.
