UNI-T UT361 Anemometer

UNI-T UT361 Anemometer
This product comes with a 3-year warranty. The UNI-T UT361 anemometer is a small, stable, and reliable handheld instrument for measuring wind speed and temperature with a separate speed sensor, which ensures fast detection, low power consumption, and high accuracy. The anemometer allows automatic measurement at predetermined intervals of 0.5 to 255 seconds and storage of values in the internal memory in up to 2044 records. Large backlit display 57 mm x 37 mm, showing wind speed and temperature simultaneously.
The device can be used in many areas – such as mining, petrochemicals, energy, navigation – in aviation and maritime transport, in the manufacture of fans or the installation of exhaust and air recovery ventilation, as well as in sports. Powered by a 9V alkaline battery, automatic shutdown after approximately 10 minutes of inactivity, which can be disabled.

Product parameters:

– wind speed measurement range: 0 ~ 30 m/s
– the measuring instrument and handle are connected by a cable
– with high-precision fan tip
– reliability
– Wide selection of wind speed units (VEL): (m/s, km/h, ft/min, MPH, KNOTS)
– selection of wind flow units (FLOW): CMM (cubic meters per second), CFM (cubic feet per minute)
– wind speed measurement modes: MAX, MIN, real time
, MAX, wind speed mode
, MAX, MAX, MAX2, MAX, MAX real time
– Temperature measurement range: 10°C ~ 40°C
– unit selection: °C or °F
– display backlight: yes
– Data Hold: yes
– automatic recording function with interval: 0.5 to 255 s
– data storage: up to 204/4
technical records
parameters:

– Wind speed measurement range: 2 m/s to 10 m/s, resolution 0.1 m/s, accuracy ± (3% of measurement +0.5)
– Wind speed measurement range: 10 m/s to 30 m/s, resolution 0.1 m/s, accuracy ± (3% from wind measurement): flow measurement
-8% (3.MM) 0.001 to 9999 x 100
– Wind speed measurement (CFM): 0.001 to 9999 x 100
– sampling frequency: approx. 2 measurements per second
– Temperature measurement range: 10°C ~ 40°C, resolution 0.1°C, accuracy ± 3°C (32°F ~ 104°F, resolution 0.2°F, accuracy ± 4°F)
– measurement of maximum, minimum, or average values: MAX/MIN of the wind sensor type based on the wind sensor display principle: MAX/MIN. magnetic induction
– temperature sensor type: negative temperature coefficient, NTC
– measurement pause: HOLD is displayed
– data storage: 2044 records
– Display backlight: yes, can be turned on/off
– Automatic shutdown: Yes, after 10 minutes of inactivity, continuous operation can be disabled when low battery voltage is disabled. Up to ≤ 7.2V
– battery powered: 1 x 9V (6F22)
– device dimensions: 162 mm x 78 mm x 30 mm
– device weight: 375g
– product color: red and gray
– Operating temperature and humidity: 0°C to 2°C (~32°F), humidity less than 75% RH
– Storage temperature and humidity: -20°C to 65°C (-4°F to 149°F) (relative humidity less than 75%)
– pressure: 500 mB to 2 bar

Package contents: - UT anemometer: - UT: - UT 6 1pc
– 9V battery (6F22): 1 piece
– instructions for use: 1 piece

Wholesale packaging:

– standard quantity per box: 10 pieces
– Standard box dimensions: 460 mm x 335 mm x 210 mm Gross box weight: 8 kg

MANUFACTURER: UNI-TREND

Home