{"product_id":"uni-t-ut622e-multimeter","title":"UNI-T UT622E multimeter","description":"\u003cp\u003eThis product comes with a 3-year warranty. The UT622E LRC is a portable component tester for inductors, resistors and capacitors, measuring overall impedance Z and DC resistance DCR, as well as their secondary properties: D (loss factor), Q (quality factor), Θ (phase angle in degrees), Θ (phase angle in degrees), Θ (phase angle in series or equivalent radians (resistors) and ESR (parallel resistance). Component parameters are measured using AC voltage with a selectable frequency of 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz and a selectable amplitude of 0.1 Vrms, 0.3 Vrms, 1.0 Vrms at a signal source output impedance of 1100Ω. Unlike the UT622A, the UT622E also offers the option to measure using a DC voltage of 1.0 V. The highest measurement accuracy is 0.1%.\u003cbr\u003e\nThe device features an intuitive 2.8-inch TFT LCD display with ten-step adjustable backlight brightness, a built-in high-capacity 1800mAh Li-Pol battery, and a miniUSB connector for charging and data transfer to a computer. The maximum display value when measuring primary parameters is 99999, and the minimum value when measuring secondary parameters is 0.0001. Measurement mode – a measurement triggered by a TRI button or a command from a PC; or continuous measurement with adjustable test start rate of 20x\/sec, 5x\/sec, 2x\/sec. Terminal configuration 4 + 1n (UTR-L100k-H) or 2 + 1 (after purchasing UTR-002 test cables with crocodile clips).\u003cbr\u003e\nThanks to its technological sophistication, the device is also suitable for professional use – together with a computer (PC), it creates a station for sorting specified parameters in laboratories, production lines and is compliant with laboratory standards, etc.\u003c\/p\u003e\n\u003cp\u003eProduct parameters:\u003c\/p\u003e\n\u003cp\u003e- manual RLC meter for primary and secondary component parameters\u003cbr\u003e\n- intuitive TFT LCD display, large backlight, 10 brightness levels\u003cbr\u003e\n- display range up to 99,999\u003cbr\u003e\n- Maximum accuracy for specified components\u003cbr\u003e\n- 1% selectable\u003cbr\u003e\n\/- 1% selectable for components measuring AC voltage at 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz\u003cbr\u003e\n- Selectable AC voltage range: 0.1 Vrms, 0.3 Vrms, 1.0 Vrms\u003cbr\u003e\n- DCR measurement capability with 1.0 V DC-equivalent \u003cbr\u003e in series, for Z \u0026gt; 10 kΩ in parallel)\u003cbr\u003e\n- automatic component identification\u003cbr\u003e\n- Built-in high-capacity Li-Pol battery: 1800 mAh\u003cbr\u003e\n- Power supply + charging: DC adapter 5V ± 0.25V, \u0026gt; 1A\u003cbr\u003e\n- Operating time on a single battery charge: typically 8 hours, including AV-G recording and statistics functions\u003cbr\u003e\nMIN\u003cbr\u003e\n- beep when buttons are pressed: yes, can be switched on\/off\u003cbr\u003e\n- button lock: yes\u003cbr\u003e\n- auto-off: yes, after 5, 15, 30, 60 minutes or off\u003cbr\u003e\n- Data interface: mini USB\u003cbr\u003e\n- data transfer rate to PC: 94,000\/3,000,000,000 comparison of audible and visual tolerance results: off, pass, fail\u003cbr\u003e\n- audible alarm selection: short beep, long beep, two short beeps\u003cbr\u003e\n- Open circuit or short circuit tester reset: yes\u003cbr\u003e\n- Setting of tolerance value from nominal: 1% to 20%, default 5%\u003cbr\u003e\n- Counting of all components: non-compliant\u003c\/p\u003e\n\u003cp\u003eTechnical parameters:\u003c\/p\u003e\n\u003cp\u003e- Measurement range for primary impedance parameters:\u003cbr\u003e\ntype \/\/ display range \/\/ minimum resolution in the\u003cbr\u003e\ninductance L \/\/ 0.001 μH to 9999.9 H \/\/ 1 \/ 0.01 μ \/ 0.001 μ \/\u003cbr\u003e\ncapacitance C \/\/ 0.001 pF to 99.999 mF \/\/ 1 \/ 0.1 \/ 0.01 \/ 0.001 pF\u003cbr\u003e\nresistance R \/\/ 0.0001 Ω to 99.999 MΩ \/\/ 0.0001 Ω\u003cbr\u003e\nTotal impedance\u003cbr\u003e\n0909\/0Ω. \/\/ 0.0001 Ω\u003cbr\u003e\nDC resistance DCR \/\/ 0.1 mΩ to 999.99 kΩ \/\/ 0.1 mΩ\u003c\/p\u003e\n\u003cp\u003e- Measurement range for secondary impedance parameters:\u003cbr\u003e\ntype \/\/ display range \/\/ minimum resolution within the range\u003cbr\u003e\nD loss factor \/\/ 9\/90000000 \/\/ 1 \/\/ 9000000. 0.0001\u003cbr\u003e\nQuality factor Q \/\/ 0.0001 to 99999 \/\/ 0.0001\u003cbr\u003e\nphase angle in degrees Θ \/\/ -179.9° to 179.99° \/\/ 0.01°\u003cbr\u003e\nphase angle in radians Θ \/ 1 rad \/\/ 6 rad \/\/ 3.1 rad \/\/ 0.001 rad\u003cbr\u003e\nEquivalent resistance ESR \/\/ 0.01 mΩ to 999.99 Ω \/\/ 0.01 mΩ\u003c\/p\u003e\n\u003cp\u003e- display: backlit TFT LCD display with a diagonal of 2.8\"\u003cbr\u003e\n- display range: maximum 99999\u003cbr\u003e\n- component setting accuracy\u003cbr\u003e\n- 1%: tolerance in accordance with best fit\u003cbr\u003e\n-. yes\u003cbr\u003e\n- Measurement in DCR mode: DC voltage 1.0V\u003cbr\u003e\n- AC voltage measurement: AC 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz\u003cbr\u003e\n- measurement voltage range: 0.1 Vrms, 0.3 Vrms, data transfer 0.3 Vrms,\u003cbr\u003e\nVrms, yes, after installing the software on the PC\u003cbr\u003e\n- Power supply: 1800mAh Li-Pol battery and (or) 5V ± 0.25V DC adapter, \u0026gt; 1A\u003cbr\u003e\n- automatic charging management: even when the device is switched off\u003cbr\u003e\n- Charging and data interface: mini USB\u003cbr\u003e\n- operating environment: temperature 5 to 80°C, humidity ≤ 30% without batteries: 305g\u003cbr\u003e\n- Product dimensions (H x W x D): 190 x 90 x 44 mm\u003cbr\u003e\n- Package dimensions: 225 x 220 x 63 mm\u003cbr\u003e\n- Safety and EMC certification: IEC \/ EN61010-1: 2010, EN61326-2:-2:-2:6 2013\u003c\/p\u003e\n\u003cp\u003eContents of individual package:\u003c\/p\u003e\n\u003cp\u003e- UT622E device: 1 pc\u003cbr\u003e\n- USB interface cable: 1 pc\u003cbr\u003e\n- UTR-L100k-H four-pole test leads: 1 pc\u003cbr\u003e\n- Gold-plated short-circuit test lead: UTR-1-circuit\u003cbr\u003e\n1 pc\u003c\/p\u003e\n\u003cp\u003eMANUFACTURER: UNI-TREND\u003c\/p\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":57062171967819,"sku":"07720291","price":365.53,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/3323\/6043\/files\/07720291.jpg?v=1776539738","url":"https:\/\/solartech.eu\/products\/uni-t-ut622e-multimeter","provider":"SolarTech - Solar Inverters, PV Modules, Solar Accessories, ESS Battery","version":"1.0","type":"link"}