{"product_id":"uni-t-ut622a-multimeter","title":"UNI-T UT622A multimeter","description":"\u003cp\u003eThis product comes with a 3-year warranty. The UT622A LRC is a portable component tester for inductors, resistors and capacitors and their secondary properties: D (dissipation factor), Q (quality factor), Θ (phase angle in degrees), Θ (phase angle in radians) and ESR (equivalent series resistance). Component parameters are measured using AC voltage with a selectable frequency of 100, 120, 1000, 10000 Hz and a selectable amplitude of 0.1Vrms, 0.3Vrms, 1.0Vrms at a signal source output impedance of 100Ω. The highest measurement accuracy is 0.1%.\u003cbr\u003e\nThe device features an intuitive 2.8-inch TFT LCD display with ten-step adjustable backlight brightness, a built-in high-capacity 1800mAh Li-Pol battery, and a miniUSB connector for charging and data transfer to a computer. The maximum display value when measuring primary parameters is 99999, and the minimum value when measuring secondary parameters is 0.0001. Measurement mode – a measurement triggered by a TRI button or a command from a PC; or continuous measurement with adjustable test start rate of 20x\/sec, 5x\/sec, 2x\/sec. 2 + 1 or 4 + 1 terminal configuration (following the purchase of UTR-L100k-H test cables).\u003cbr\u003e\nThanks to its technological sophistication, the device is also suitable for professional use – when used with a computer (PC), it creates a station for sorting components according to specified parameters and can be used in production lines, laboratories, etc.\u003c\/p\u003e\n\u003cp\u003eparameters\u003c\/p\u003e\n\u003cp\u003e:\u003c\/p\u003e\n\u003cp\u003e- manual RLC meter for primary and secondary component parameters\u003cbr\u003e\n- intuitive TFT LCD display, large backlit screen, 10 brightness levels\u003cbr\u003e\n- display range up to 99,999\u003cbr\u003e\n- maximum accuracy 0.1%\u003cbr\u003e\n- option to select components based on AC voltage, tolerance 10, specified tolerance 10\u003cbr\u003e\n1000 or 10000 Hz\u003cbr\u003e\n- Selectable amplitude measurement voltage: 0.1Vrms, 0.3Vrms, 1.0Vrms\u003cbr\u003e\n- selection of equivalent mode (for Z \u0026lt;100Ω in series, for Z \u0026gt; 10kΩ in parallel)\u003cbr\u003e\n- automatic identification of built-in components\u003cbr\u003e\n- high capacity Li-ion battery: 180 mAh\u003cbr\u003e\n- Power supply + charging: DC adapter 5V ± 0.25V, \u0026gt; 1A\u003cbr\u003e\n- operating time on a single battery charge: typically 8 hours\u003cbr\u003e\n- functions in recording mode and data statistics: AVG, MAX, MIN\u003cbr\u003e\n- beep when buttons are pressed: yes, button can be activated:\u003cbr\u003e\non\/off switch\u003cbr\u003e\nautomatic switch-off: yes after 5, 15, 30, 60 minutes or off\u003cbr\u003e\n- Data interface: mini USB\u003cbr\u003e\n- data transfer rate to computer: 9600\/19200\/38400 baud\u003cbr\u003e\n- Acoustic and visual alarm comparison of tolerance results: off, pass, fail\u003cbr\u003e\n- alarm selection: short beep\u003cbr\u003e\n- short beep, long beep\u003cbr\u003e\nOpen circuit or short circuit tester reset: yes\u003cbr\u003e\n- setting of tolerance value from nominal: 1% to 20%, default 5%\u003cbr\u003e\n- Component counting: all, compliant, non-compliant\u003c\/p\u003e\n\u003cp\u003eTechnical parameters:\u003c\/p\u003e\n\u003cp\u003e- Primary impedance measurement range \/ minimum resolution parameters: range\u003cbr\u003e\ninductance L \/\/ 0.001 μH to 9999.9 H \/\/ 1 \/ 0.1 \/ 0.01 \/ 0.001 μH\u003cbr\u003e\ncapacitance C \/\/ 0.001 pF to 99.999 mF \/\/ 1 \/ 0.1 \/ 0.01 \/ resistance R \/\/ 0.01 \/ 0.01 \/ 0.0001 Ω to 99.999 MΩ \/\/ 0.0001 Ω\u003cbr\u003e\nTotal impedance Z \/\/ 0.0001 Ω to 99.999 MΩ \/\/ 0.0001 Ω\u003c\/p\u003e\n\u003cp\u003e- Measurement range of secondary impedance parameters \/\/ display range of the factor \/\/\u003cbr\u003e\nresolution parameters \/\/ minimum display range \/\/\u003cbr\u003e\n\/\/ 0.0001 to 9.9999 \/\/ 0.0001\u003cbr\u003e\nQuality factor Q \/\/ 0.0001 to 99999 \/\/ 0.0001\u003cbr\u003e\nphase angle in degrees Θ deg \/\/ -179.9° to 179.99° \/\/ 0.0001\u003cbr\u003e\nphase angle in degrees Θ deg \/\/ -179.9° to 179.99° \/\/ 0.0001\u003cbr\u003e\nphase angle in 0.0001 to 9.9999 -3.142 rad to 3.1416 rad \/\/ 0.001 rad\u003cbr\u003e\nEquivalent resistance ESR \/\/ 0.01 mΩ to 999.99 Ω \/\/ 0.01 mΩ\u003c\/p\u003e\n\u003cp\u003e- display: backlit TFT LCD display with a diagonal of 2.8 inches:\u003cbr\u003e\n-999999999999999999999999999999999999999999999999999 0.1%\u003cbr\u003e\n- component selection based on set tolerance: yes\u003cbr\u003e\n- voltage measurement: AC 100, 120, 1000 or 10000 Hz\u003cbr\u003e\n- amplitude measurement: 0.1 Vrms, 0.3 Vrms, 1.0 Vrms,\u003cbr\u003e\ndata transfer to PC: via PC software\u003cbr\u003e\n- power supply: 1800mAh Li-Pol battery and (or) 5V ± 0.25V DC adapter, \u0026gt; 1A\u003cbr\u003e\n- automatic charging management: even when the device is switched off\u003cbr\u003e\n- Charging and data interface: mini USB\u003cbr\u003e\n- operating environment: temperature 5 to 35°C, humidity \u0026lt;0% by weight\u003cbr\u003e\n- 305g\u003cbr\u003e\n- Product dimensions (H x W x D): 190 x 90 x 44 mm\u003cbr\u003e\n- package dimensions: 225 x 220 x 63 mm\u003cbr\u003e\n- Safety and EMC certification: IEC \/ EN61010-1: 2010, EN61326-2: 2013:- EN61326-2: 2013:- 2013\u003c\/p\u003e\n\u003cp\u003eContents of individual package:\u003c\/p\u003e\n\u003cp\u003e- UT622A device: 1 pc\u003c\/p\u003e\n\u003cp\u003eMANUFACTURER: UNI-TREND\u003c\/p\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":57062172229963,"sku":"07720290","price":225.97,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/3323\/6043\/files\/07720290.jpg?v=1776539744","url":"https:\/\/solartech.eu\/products\/uni-t-ut622a-multimeter","provider":"SolarTech - Solar Inverters, PV Modules, Solar Accessories, ESS Battery","version":"1.0","type":"link"}