UNI-T UTG2082B function generator

This product comes with a 3-year warranty. Function/Arbitrary Waveform Generator The UTG2082B is an advanced dual-channel generator that uses direct digital synthesis technology to produce accurate and stable arbitrary waveform output with a resolution of 1μHz, a maximum output frequency of 80MHz, and a sampling rate of 320MS/s. Modulation of signals with various modulations, such as AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep, etc., from internal or external sources is available, with linear and logarithmic sweep. The panel is ergonomically designed for easy operation. The generator is intended for use in the design, development, testing, debugging, and repair of electronic and electroacoustic equipment, such as circuits and test equipment in cellular and wireless systems, radio and television systems, semiconductor component testing, etc. Thanks to DDS technology, it is capable of generating accurate and clean signals with minimal distortion. An easy-to-use panel with simple controls and a clear display allows you to work much more efficiently and quickly. It has a USB interface and powerful software for transferring data to a computer. More than 160 waveforms are stored in the internal non-energetic memory, e.g. mathematical, bioelectrical, medical, trigonometric, antitrigonometric, automotive transients, etc. It has an excellent price/performance ratio and a range of functions. It can be used in university laboratories, research institutes, etc. This device meets the safety requirements for electronic measuring devices GB4793 and safety standards IEC 61010-1/2, meets the safety standards for isolated voltage CAT II 300V. connection of both channels
– Digital DDS signal synthesis
– generation of sinusoidal signals with a frequency ranging from 1μHz to 80MHz
– generation of square wave signals with a frequency ranging from 1μHz to 70MHz
– generation of various other waveforms (sinusoidal, square, square, any type of noise, ramp, triangle, pulse, AM modulation, DC, FM) PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep
– using a modulation signal from an internal or external source
– the ability to enter the signal shape using a mathematical formula
– option to enter the signal phase in degrees or radians – supports output and radians
– supports output and burst signals
– accepts internal/external/manual triggering
– High-precision 6-bit frequency measurement up to 200MHz TTL-compatible external signals
– Output signal amplitude up to 10Vpp at 50Ω impedance or up to 20Vpp in high impedance mode
-protection of terminals against frequency/sampling overvoltage of 3/20M
16-bit vertical resolution
– possibility to store up to 16 groups of variable digital waves
– Front panel USB interface for waveform input
– USB Host interface on rear panel, powerful PC software
– LAN connector on rear panel for firmware updates
– Multifunction button and numeric keypad for easy operation of the system with LCD display
– 4.3" diagonal screen and WVGA resolution (480 x 272 pixels)

Technical parameters:

– output channels: 2
– sampling frequency: 1.28 GS/s (interpolation), 320 MS/s (DDS mode)

– output frequency:
– output frequency:
– 8 output frequency:
– 0 MHz 1μHz
– vertical resolution: 16 bits (including symbols, inscriptions)
– wavelength of any shape: 8pts to 16Mpts
– Non-volatile memory: up to 160 groups of arbitrary curves can be stored
– types and frequencies of signals generated from 1μHz:
at> sine wave:μzbr:/ 80MHz
rectangular: from 1μHz to 70MHz
ramp (saw): from 1μHz to 4MHz
pulse: from 1μHz to 25MHz
anything: from 1μHz to 20MHz
Gaussian noise: up to 80MHz signal offset
d-Bk) AC+DC): ± 5V (50 Ω), ± 10V (high resistance)
– minimum rise/fall time of any signal: typically < 6ns
– Amplitude range: 1 mVpp to 10 Vpp (50Ω), 2 mVpp to 20 Vpp (High Z)
, types of modulation PSK, AMSK, FSK, AMSK PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep
– operating modes: output on/off, continuous, modulation, sweep, series
– Measurement of TTL-compatible signal frequencies: yes, in the range 100 MHz – 200 MHz, with a resolution of ± 1 ppm, with an accuracy of 5 ppm. digits/s
– Output impedance: adjustable from 1Ω to 1kΩ, or High Z, factory setting 50Ω
– Output short-circuit protection: yes
– terminal protection against overvoltage: at input voltage >±12.0V, frequency 100mVpp at input overvoltage
terminal protection against input overvoltage >±2.0V, frequency <10kHz, amplitude ≤100mVpp
– Total harmonic distortion 20kHz, 1Vpp (typical): <0.2%
– accuracy: ± 0.5 ppm at 25°C
– aging rate in the first year
– Temperature coefficient: ± 1 ppm. 0.5 ppm/℃
– temperature coefficient: <2 ppm/℃
– Display: 64K TFT LCD, 4.3" diagonal, WVGA (480 x 272 pixels)
– USB device interface: yes
– power supply: AC from 100 V, at 44 Hz, 40 V to 44 Hz II
– power consumption: <50W
– protection: 250 V safety, T2 A
– Weight (Net): 3.1 kg
– total weight: 4.1 kg
– dimensions: 305 x 230 x 93mm
– product color: white and gray
>

>
function of individual packaging
>
UTG2082B generator: 1 piece
– power cable: 1 pc.
– USB interface cable: 1 piece 380 x 330 x 320 mm
– gross weight of the box: approx. 8.5 kg

MANUFACTURER: UNI-TREND