UNI-T UT363S Anemometer

UNI-T UT363S Anemometer
This product comes with a 3-year warranty. The UNI-T UT363S anemometer is a small, stable, and reliable handheld instrument for measuring wind speed and temperature with a separate speed sensor, ensuring fast detection, low power consumption, and high accuracy. The device can be used in many areas—such as mining, petrochemicals, energy, navigation—in aviation and maritime transport, in the manufacture of fans or the installation of exhaust and air recovery ventilation, and in sports. Drop resistance from a height of 1 m. Backlit LCD display measuring 35x32mm, with a four-digit display of wind speed and a simultaneous three-digit display of wind temperature. Powered by 3x 1.5 V (AAA) batteries, automatic shutdown after 5 minutes of inactivity, which can be disabled.

Product parameters:

– Wind speed measurement range: 0.4 ~ 30 m/s
– the measuring instrument and handle are connected by a wind selection cable with a high-speed unit
– measuring maximum, minimum, or average values
– Temperature measurement range: -10°C ~ 50°C
– unit selection: °C or °F
– display backlight: yes

Technical parameters:

– wind speed measurement range: 0.4 m, resolution 0.4 m, accuracy ±/3 (5% measurement +0.5)
– Wind speed measurement range: 1.4 ~ 108 km/h (for guidance only), accuracy ± (5% of measurement +15 digits)
– Wind speed measurement range: 0.7 ~ 58 knots, (for guidance only), accuracy ± (5% of measurement +15 digits) Range: 0.8 ~ 67 mph, (for guidance only), accuracy ± (5% of measurement +10 digits)
– Wind speed measurement range: 78 ~ 5905 ft/min (for guidance only), accuracy ± (5% of measurement +180 digits)
– wind speed measurement range: 1 degree, depending on the wind force measurement degree: ~ 1 measurement degree only), accuracy ± 1 degree
– sampling frequency: 2 measurements per second
– Temperature measurement range: -10 °C ~ 50 °C, resolution 0.1 °C, accuracy ± 2 °C (14 °F ~ 122 °F, resolution 0.2 °F, accuracy ± ± 4 °F of the measured value: maximum, minimum, or average
– 4 °F) MAX/MIN/AVG is displayed.
– Overload indicator „OL”: if the wind speed exceeds 45 m/s or the temperature is below -10°C or above 50°C, „OL” is displayed. Wind speed sensor: based on the principle of magnetic induction
– temperature sensor type: negative temperature coefficient, NTC
– measurement pause: HOLD is displayed
– Display backlight: yes, can be turned on/off
– automatic shutdown: yes, after 5 minutes of inactivity, can be disabled for continuous operation when voltage drops
-. 3.5V
– battery powered: 3x 1.5V (AAA) batteries
– device dimensions: 120 mm x 53 mm x 43 mm
– device weight: 365g
– the device is intended for: indoor use
– Operating temperature and humidity: 0°C, humidity less than 40% 40°C ~ 50°C (relative humidity less than 45%)
– altitude: 2000m
– Storage temperature and humidity: -20°C ~ 60°C (relative humidity less than 75%)

Package contents:

UT3633 anemometer 1.5 V (AAA) battery: 3 pcs
– instructions for use

Wholesale packaging:
– standard quantity per box: 20 pieces
– standard box dimensions: 550 mm x 295 mm x 350 mm
– standard gross weight per box: 7.2 kg
MANU>
MAN/F UNI-TREND
https://www.uni-trend.com/