UNI-T UT196 Multimeter

This product comes with a 3-year warranty.

The UT196 True RMS solar multimeter from UNI-T is a professional product for professionals who install or maintain photovoltaic or wind power plants. The device's design allows it to be used in harsh outdoor environments – it has IP65 protection and can withstand a fall from a height of 2 m. This multimeter measures DC voltage up to 1700 V, AC voltage (true rms) up to 1500 V at a frequency range from 45 to 1000 Hz. With the additional UT-CS09D Flex current loop, it allows non-contact measurement of AC currents from 1.5 to 3000 A, even in confined spaces. In addition, the UT196 measures frequency, resistance, capacitance, semiconductor transitions, and electrical circuit continuity.
The low-pass function allows you to filter RF interference generated by the inverter. The low impedance mode can help troubleshoot sensitive circuits, as well as circuits that may contain parasitic voltages. A built-in flashlight, bright backlight, and audible and visual alarms allow users to complete their work safely and efficiently, even in dark and noisy environments.
The UT196 solar digital multimeter is designed with overload protection of 1700V DC, 1500Vrms AC and tested for safe use in a CAT III 1000V, CAT IV, UK and CA600V, UK and CA 600Vrms certified environment. cETLus.

Product parameters:

– multifunctional multimeter with a focus on outdoor and indoor installations of photovoltaic and wind power plants
– measurement of AC/DC voltage, resistance, capacitance, frequency, diodes, circuit continuity, with external current loop and AC current
– LCD display
-, maximum backlit value
– display: ± 6000, values are updated 2 to 3 times per second
– Analog bar graph: yes, 31 segments, measuring speed 30 times per second
– interval switching: automatic / manual
– Automatic AC/DC voltage identification: yes
– Non-contact electromagnetic field measurement (NCV): yes
– diode testing (semiconductor junctions): yes, open circuit voltage approx. 3V
– electrical circuit continuity test: yes, the circuit is considered closed when R ≤ 10Ω, then the buzzer emits a beep
– Built-in low-pass filter (LPF): Yes, when LPF is activated, interference voltages above 1.2 kHz are attenuated by ≥ -3db/0>Hz attenuation relative to attenuation measurement.
Hz. yes
– Peak Hold: yes
– Display freeze (Data Hold): yes
– Max/Min mode: yes
– power supply: 9V / 6F22 battery,
– low battery indicator: yes, when voltage drops below <7.5V, – automatic shutdown during inactivity
-1
– minutes
– Built-in flashlight: yes
– audible and visual indication: yes

Technical parameters:

DC voltage measurement (V): Range / Resolution / Accuracy
600.0 mV / 0.1 mV / ±(0.51 TP3T/1 V/5.0)

±(0.2%+5)
60.00V / 0.01V / ±(0.2%+5)
600.0V / 0.1V /±(0.2%+5)
1700V / 1V / ±(0.2%+5)
The input range is approximately mV/DC. 1GΩ.

AC voltage measurement (V): Range / Resolution / Accuracy
600.0mV / 0.1mV / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
6,000V / 0.001V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
60.00V / 0.01V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
600.0V / 0.1V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
1500V / 1V / 45Hz to 500Hz: ± (0.8%+3); 500Hz to 1kHz: ± (1.8%+3)
The input impedance in the mV/AC range is approximately 10MΩ.

Automatic AC/DC voltage measurement: automatic range / Resolution / Accuracy
0V to 600.0V / 0.1V / DC at 500Hz: ± (2.0%+3); From 500 Hz to 1 kHz: ± (4.0%+3)
With automatic range selection, LPF, Peak Hold selection is not possible, input impedance is 2MΩ

Resistance measurement: range / resolution / accuracy
600.0Ω / 0.10Ω /±20.10Ω /±20.10Ω 1Ω / ± (0.8%+2)
60.00kΩ / 10Ω / ± (0.8%+2)
600.0kΩ / 100Ω / ± (0.8%+2)
6,000 MΩ / 1 kΩ / ± (1.21 TP3T/+6 Ω) + 3 Ω. (2.51 TP3T + 5)

Capacitance measurement: Range / Resolution / Accuracy
60.00nF/0.01nF/in REL mode: ± (3%+10)
600.0nF / 0.1nF / ± (1.9%>+5.00μF / 0.00μF / 0.00μF / 5.00μF) ± (1.9%+5)
60.00μF / 0.01μF / ± (1.9%+5)
600.0μF / 0.1μF / ± (1.9%+5)
6,000mF / 0.001mF / ± (5%>+5)
0.001mF / 0.001mF / ± (5%>+5) ± (5%+5)

Measuring alternating current with a UT-CS09D Flex current loop: Range / Resolution / Accuracy
30.00A / 0.01A / ± (0.8%+8)
300.0A / 0.1A /+300.0A / 0.1A /+0. ± (0.8%+8)

Frequency measurement: Range / Resolution / Accuracy
60.00Hz to 1,000MHz / 0.1Hz to 0.001MHz / ± (0.08% +4)

Other operating parameters: -0.001MHz 40°C (32°F – 104°F)
– storage temperature: -10°C – 50°C (14°F – 122°F)
– relative humidity: ≤75% RH (0°C – 30°C), ≤50% RH (30°C) operating altitude –
≤2000 m
– EMC immunity: according to EN61326-1: 2013, EN61326-2-2: 2013
– power supply: 9V battery / 6F22
– external dimensions: 195 x 95 x 58 mm
– IP weight:<br/4-85 IP65
– drop test: 2 m
– Certification: CE, UKCA, cETLus (CAT III 1000V, CAT IV 600V)
– According to standards: EN61010-1, EN61010-2-033, EN/IEC 61010-031 :-Contents of individual packaging :-/>
UT196 Solar PRO multimeter: 1 piece
– test cables: 1 pair
– 9V/6F22 battery: 1 piece
– instructions for use: 1 piece

Manufacturer:
UNI-TREND
–