UNI-T UT161E Multimeter

UNI-T UT161E Multimeter
This product comes with a 3-year warranty. The UT161 series of multimeters is a range of highly reliable, safe, durable, and accurate multimeters that are CE certified and suitable for the European market. The screens of these multimeters are backlit LCD (dark data on a light background) with a number of digits of ± 6000 (for UT161B and UT161D) and ± 22000 for UT161E. The displays have a refresh rate of 2-3 times per second and also contain an analogue column with 31 segments (UT161B and UT161D) or 41 segments (UT161E). The multimeters measure AC and DC voltages up to 1000V and are equipped with an audible and visual warning when maximum voltage/current or temperature values are reached. Allows non-contact detection of AC voltage wires. The package includes a USB cable with an optoelectric converter for data transfer to a PC. The power source is four AAA (R03) micro batteries, and the device automatically shuts down after 15 minutes of inactivity (this function can be temporarily disabled). The current inputs are protected by tubular fuses, and the fuses can be tested without opening the device.

UT161E 1000 V True RMS Digital Multimeter.

Product parameters:

– Fully complies with IEC/EN61010-1 and has CAT-III-0 double insulation included
V-10 interior electrical installation including three-phase distribution
– included in category CAT IV 600V – outdoor electrical installation (safety elements, start of indoor installation)
– HTN LCD display with a maximum display of ± 22000
– refresh rate for most measurements of 3x per second
– automatic or manual setting intervals
– automatic polarity indication
– AC voltage measurement ranges: V / 21000 mV / 21/2000 mV Ranges: 220 μA / 20 A
– DC voltage measurement ranges: 220 mV / 1000 V
– DC current measurement ranges: 220 μA / 20 A
– Resistance measurement ranges: 220 MV / 200 V
– Capacitor measurement ranges <br/220 Ω / 20 A / 220mF
– frequency measurement range: 10 Hz / 220 MHz
– measuring the gain (β) of transistors
– measuring silicon transitions in diodes
– measuring line continuity
– non-contact voltage detection NCV
– High accuracy of TRMS effective voltage measurement, st. voltages and currents
– relative measurement mode
– MAX/MIN mode
– Overtaking warning: OL
– VFC anti-interference filter
– USB cable for transferring measured values to a PC
– The software can be downloaded from the manufacturer's website: https://meters.uni-series/161/products/series/#61 Protection of inputs against voltage surges exceeding 1000V
– μA and mA input current protection with FF600 mA H 1000 V fast fuse, ø6 x 32mm CE
– input current protection via FF11A / 1000V ø10 x 38mm CE fast fuse
-imp. 1GΩ, in other voltage ranges 10MΩ,
– testing of diodes and semiconductor transitions with voltage from 0 to 3V, test current 1.2mA
– powered by 4 AAA R03 1.5V batteries
– low battery indicator
– Automatic shutdown after 15 minutes of Bluetooth data transfer
-optional adapter for inactivity
on the PC
– measurement is possible in an electromagnetic field with an intensity of 1V/m with an additional error of 5%

Technical parameters:
(accuracy is defined at a temperature of 23°C ± 5°C and a relative humidity of less than or equal to 75%)

– DC voltage measurement (input range is approx. 1Ω for mV. Other ranges):
(radius/resolution/accuracy)
220.00 mV / 0.01 mV / ± (0.1 % + 5)
2.2000 V / 0.1 mV / ± (0.05 % + 5)
22,000 V / ± 5.0 mV / ± 5.0 mV / ± 0.1 mV / ± (0.05 % + 5) 220.00 V / 10 mV / ± (0.05 % + 5)
1000 V / 0.1 V / ± (0.1% + 5)

– AC voltage measurement (input impedance approx. 10MΩ):
(within the range/resolution/accuracy of 14 kHz/10 MΩ) 1 kHz to 10 kHz/40 Hz to 100 kHz (with LPF filter)
220.00 mV / 0.01 mV / ± (1.0 % + 10) / ± (1.5 % + 30) / unspecified
2,200 mV / ± 10 V / ± 10 V / ± 10 V / ± (1.5 % + 30) / unspecified ± (1.2 % + 50) / ± (1.2 % + 50)
22,000 V / 1 mV / ± (0.8 % + 10) / ± (1.2 % + 50) / ± (1.8 % + 50)
220.00 V / ± 0.00 V / ± 0.0 mV / ± 10) / ± (1.8 % + 50) (2.0 % + 50) / ± (2.0 % + 50)
1000 V / 0.1 V / ± (1.2 % + 10) / ± (3.0 % + 50) / ± (3.0 % + 50)

– (in AC + DC voltage measurement) approx. range / resolution / accuracy ) accuracy in the range from 40 Hz to 500 Hz
2,2000 V / 0.1 mV / ± (1.8 % + 70)
22,000 V / 1 mV / ± (1.8 % + 70)
22,000 V / 1 mV / ± (1.8 % + 70)
22,000 V / ± 1.0, mV / ± 1.0, mV / ± 1.0 % 70)
1000 V / 0.1 V / ± (4.0 % + 70)
Displays the actual RMS value

– DC current measurement:
(range / resolution / accuracy)
220.00 μA / 0.01 μA / 0.01 μA / ± 1 μA,
2200.0 μA / 0.1 μA / ± (0.5 % + 10)
22,000 mA / 1 μA / ± (0.5 % + 10)
220.00 mA / 10 μA / ± (0.5 % + 0/> 10 / 0.5 % + 10) (1.2 % + 50)

– AC current measurement:
(range / resolution / accuracy) accuracy in the range of 40 Hz to 1 kHz / accuracy in the range of 1 kHz to 10 kHz)
220.00 μA / μA / ± 0.0 % / ± 1 kHz ± (3 % + 50)
2200 μA / 0.1 μA / ± (0.8 % + 10) / ± (3 % + 50)
22 mA / 1 μA / ± (1.2 % + 10) / ± (3 % + 50) / ± (3 % + 50) / ± (3 % + 50)
22 mA / 1 μA / ± (1.2 % + 10) / ± (3 % + 50) / ± (3 % + 50)
/ 20 μA + 10) / ± (3 % + 50)
20 A / 1 mA / ± (1.2 % + 10) / ± (3 % + 50)

– Resistance measurement:
(range/resolution/accuracy)
220.00 Ω, / 0.00 Ω, % / ± 1 Ω
2.2000 kΩ / 0.1 Ω / ± (0.5 % + 10)
22,000 kΩ / 1 Ω / ± (0.5 % + 10)
220.00 kΩ / 10 Ω / ± (0.5 % + 10Ω) /20/> 102Ω /20/> ± (0.8 % + 10)
22,000 MΩ / 1 kΩ / ± (1.5 % + 10)
220.00 MΩ / 10 kΩ / ± (3.0 % + 50)

– Measuring capacitor capacity:
02, resolution 02,
02 nF / 1 pF / ± (3.0 % + 5)
220.00 nF / 10 pF / ± (3.0 % + 5)
2.2000 μF / 100 pF / ± (3.0 % + 5)
22,000 μF / ± 5.0 %
220.00 μF / 10 nF / ± (40 % + 5)
2,2000 mF / 100 nF / ± (40 % + 5)
22,000 mF / 1 μF / ± (10 % + 5)
220 % + 0 μF / ±0 % (0 μF / ± 0 % 5)

– Measurement of diodes and semiconductor junctions:

the measured value is 0.12 to 2 V and the green LED is lit: the diode is OK,
the measured value is less than 0.12 V and the red LED is lit: the diode may be damaged at the silicon junction; 0.500 to 0.800 mV
voltage resolution during this measurement: 0.001V

– Circuit continuity measurement:
when the line resistance is ≥70 Ω, an open circuit is indicated, the buzzer does not beep, and the red indicator light is on
0 Ω the resistance circuit is uninterrupted. is indicated, the buzzer sounds continuously and the green indicator light is on
overload protection: 1000V
Resistance resolution for this measurement: 0.1 Ω

– Frequency measurement, duty cycle:
(range / resolution / accuracy)
10 Hz / 1 MHz to 020 MHz, 10 Hz / 020 MHz ± 0.01% + 5

0.1% to 99.9% / 0.1% / ± (2.0% + 5)

General specifications:

– Operating temperature: 0 °C – 40 °C (32 °F – 104 °F – 104 °F at relative humidity)
-% ≤ humidity °C – 30 °C; ≤50% at 30°C – 40°C
– storage temperature: -10°C – 50°C (14°F – 122°F)
– operating altitude: ≤2000 m
– Electromagnetic compatibility: complies with EN61326-1: 20206-20206- 2006 standards
– dimensions: 186 mm × 89 mm × 49 mm
– weight: 400 g
– the device meets the standards:
cETLus, CAT III 1000V, CAT IV 600V, double insulation, overload protection with voltage greater than 102>1000V
1000V; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
According to UL STD standards: 61010-1, 61010-2-030
Certified according to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033

Package contents:

– UT161E multimeter with storage case
– CAT III gold-plated measuring cables / CAT IV60V adapter plug / 100/100V measuring transistor plug
– USB cable for data transfer to PC
– F1 fuse: 6 x 32 mm FF 600mA H 1000 V (ø6 x 32mm) CE – in device
– F2 fuse: 6 x 25 mm FF 11A H 1000 V in device
/CE – ø6 x 32mm) AAA batteries, R03 1.5V
– Czech, Slovak, English manual

Wholesale packaging:

– standard quantity in a box: 20 pieces
– standard box dimensions: 480 mm x 370 mm x 325 mm
– Total weight of box: Manufacturer 8 kg:
– UNI-TREND
–