UNI-T UT161B Multimeter

UNI-T UT161B Multimeter
This product comes with a 3-year warranty. The UT161 series of multimeters is a range of highly reliable, safe, durable, and accurate multimeters that are CE certified and suitable for the European market. The screens of these multimeters are backlit LCD (dark data on a light background) with a number of digits of ± 6000 (for UT161B and UT161D) and ± 22000 for UT161E. The displays have a refresh rate of 2-3 times per second and also contain an analogue column with 31 segments (UT161B and UT161D) or 41 segments (UT161E). The multimeters measure AC and DC voltages up to 1000V and are equipped with an audible and visual warning when maximum voltage/current or temperature values are reached. Allows non-contact detection of AC voltage wires. The package includes a USB cable with an optoelectric converter for data transfer to a PC. The power source is four AAA (R03) micro batteries, and the device automatically shuts down after 15 minutes of inactivity (this function can be temporarily disabled). The current inputs are protected by tubular fuses, and the fuses can be tested without opening the device.

UT161B True RMS 1000 V digital multimeter.

Product parameters:

– fully complies with IEC/EN61010-1, and has double insulation included in CAT/III category
1000V – interior electrical installation including three-phase distribution
– included in category CAT IV 600V – outdoor electrical installation (safety elements, start of indoor installation)
– HTN LCD display with a maximum display of ± 6000
– refresh rate for most measurements of 3x per second
– automatic or manual setting intervals
– automatic polarity indication
– AC voltage measurement ranges: 60>-0V AC
Ranges: 600 μA / 10 A
– DC voltage measurement ranges: 60 mV / 1000 V
– DC current measurement ranges: 600 μA / 10 A
– Resistance measurement ranges: 600 MΩ Capacitance: 600 MΩ / 60 MΩ-60 MΩ nF / 66mF
– measurement frequency range: 10 Hz / 10.00 MHz
– operating cycle measurement range: 0.1% to 99.9%
– measuring silicon transitions in diodes
– measuring line continuity
– non-contact measurement of high voltage
TRV detection - accuracy
NC
actual values of voltage st. voltages and currents
– relative measurement mode
– MAX/MIN mode
– Overtaking warning: OL
– USB cable for transferring measured values to a PC
– protection of inputs against voltage surges exceeding 1000V
– μA and mA input current protection with fast fuse m0 V 6100 ø 6100 V 32mm CE
– 10A input current protection via FF11A / 1000V ø10 x 38mm CE fast fuse
– input impedance in the mV range approx. 1GΩ, in other voltage ranges 10MΩ,
– testing of diodes and semiconductor transitions with voltage from 0 to 3V, test current 1.2mA
– powered by 4 AAA R03 1.5V batteries
– low battery indicator
– Automatic shutdown after 15 minutes of Bluetooth data transfer
-optional adapter for inactivity
on the PC
– measurement is possible in an electromagnetic field with an intensity of 1V/m with an additional error of 5%

Technical parameters:
(accuracy is defined at a temperature of 23 °C ± 5 °C and a relative humidity of less than or equal to 75%)

– DC voltage measurement (input range is approximately 1MV, 1MΩ 0x0x.) for other ranges):
(range / resolution / accuracy)
60.00 mV / 0.01 mV / ± (0.8 % + 5)
600.0 mV / 0.1 mV / ± (0.8 % + 3)
6,000 V / 5 / 0,± 0.01, V / ± 0.1 mV / ± (0.8 % + 3) 60.00 V / 0.01 V / ± (0.5 % + 3)
600.0 V / 0.1 V / ± (0.5 % + 3)
1000 V / 1 V / ± (1.0 % + 3)

– (in AC input voltage measurement/Ω) range/resolution/accuracy in the range from 40 Hz to 500 Hz)
60.00 mV / 0.01 mV / ± (1.2 % + 5)
600.0 mV / 0.1 mV / ± (1.2 % + 5)
6.00, ± 0 V / 0.0, ± 0 V / ± 0 V
60.00 V / 0.01 V / ± (1.0 % + 3)
600.0 V / 0.1 V / ± (1.0 % + 3)
1000 V / 1 V / ± (1.2 % + 5)
Displays the actual current value/<br/RMS
<br/rMS. :
(range/resolution/accuracy)
600.0 μA / 0.1 μA / ± (1.0 % + 2)
6000 μA / 1 μA / ± (1.0 % + 2)
60.00 mA / 10 μA / ± 0.0 μA / ± 0.0 μA / ± (1.0 % + 2) mA / 0.1 mA / ± (1.0 % + 3)
6,000 A / 1 mA / ± (1.2 % + 5)
10,000 A / 10 mA / ± (1.2 % + 5)

– AC current measurement resolution in the range H / z / z / accuracy: 500 Hz)
600.0 μA / 0.1 μA / ± (1.2 % + 5)
6000 μA / 1 μA / ± (1.2 % + 5)
60.00 mA / 10 μA / 10 μA / ± 5.0 %, ± (1.0 % + 5)
mA / ± (1.5 % + 5)
6,000 A / 1 mA / ± (2.0 % + 5)
10 A / 10 mA / ± (2.0 % + 5)
Displays the actual RMS value

–

– Resistance measurement range: resolution accuracy 600.0 Ω / 0.1 Ω / ± (1.2 % + 2)
6,000 kΩ / 1 Ω / ± (1.0 % + 2)
60.00 kΩ / 10 Ω / ± (1.0 % + 2)
600.0 % + 2 Ω / 600.0 % + 2)
600.00 kΩ / 10 Ω / ± (1.0 % + 2)
600,0 % + 2)
6,000 MΩ / 1 kΩ / ± (1.2 % + 2)
60.00 MΩ / 10 kΩ / ± (2.0 % + 5)

– Measuring capacitor capacity:
(range/resolution/accuracy)
nF / 3.0 % / ± 0.0 % 5)
600.0 nF / 100 pF / ± (3.0 % + 5)
6,000 μF / 1 nF / ± (3.0 % + 5)
60.00 μF / 10 nF / ± (3.0 % + 5) / ± (3.0 % + 5)
(3,0 % + 5)
6,000 mF / 1 μF / ± (10 % + 5)
60.00 mF / 10 μF / ± (10 % + 5)

– Frequency measurement:
(range/resolution/accuracy 10 MHz)
10 MHz 0.01 Hz to 0.01 MHz / ± 0.1 % + 4

– Measuring the work cycle:
0.1% to 99.9% / ± (2.0% + 5)

– Measure the semiconductor and semiconductor measurement value from 0.12 to 2 V, and the green LED is lit: the diode is OK.,
the measured value is less than 0.12 V and the red LED is lit: the diode may be damaged
The normal voltage drop across the silicon junction is 0.500 to 0.800 mV.
voltage resolution during this measurement. continuity measurement:
when the line resistance is ≥70 Ω, an open circuit is indicated, the buzzer does not beep, and the red indicator light is on
when the line resistance is ≤50 Ω, an uninterrupted circuit is indicated, the buzzer emits a continuous beep, and the green indicator light is on
this resolution for protection against overload
10:00V: 0.1 Ω

General specifications:

– Operating temperature: 0 °C – 40 °C (32 °F – 104 °F)
– relative humidity: ≤75% at 0°C – 30°C; ≤50% at 30°C – 40°C
– storage temperature: -10°C – 50°C (14°F – 122°F)
– operating altitude: ≤2000 m
– Electromagnetic compatibility: complies with EN61326-1: 202:206- 2006 standards
– dimensions: 186 mm × 89 mm × 49 mm
– weight: 400 g
– the device meets the standards:
cETLus, CAT III 1000V, CAT IV 600V, double insulation, overload protection with voltage greater than 102>1000V
1000V; EN 61326-2-2: 2013
EN 61010-1: 2010; EN 61010-2-030: 2010; EN 61010-2-033: 2012
According to UL STD standards: 61010-1, 61010-2-030
Certified according to CSA STD. C22.2 No. 61010-1, 61010-2-030, 61010-2-033

Package contents:

– UT161B multimeter with storage case
– Gold-plated measuring cables CAT600/1CAT III/1000 CATV-III USB cable for data transfer to PC
– F1 fuse: 6 x 32 mm FF 600mA H 1000 V (ø6 x 32mm) CE – in device
– F2 fuse: 6 x 25 mm FF 11A H 1000 V (ø10 x 38mm) CE – in R40 AAA device
– 1.5 V batteries
– manual in Czech, Slovak, English

Wholesale packaging:

– standard quantity in a box: 20 pieces
– standard box dimensions: 480 mm x 370 mm x 325 mm
– total box weight: 17.8 kg
– Manufacturer
– UNI-TREND
–