DC Source UNI-T UDP1306C

UNI-T UDP 1306C DC power supply
The UDP1306C programmable DC power supply is a cost-effective laboratory power supply with one main output channel and one USB charging channel. It is a basic power supply product for users who need a smaller size power supply with high reliability. Compared to the higher (multi-channel) types of UDP power supplies, this power supply allows for a higher load on one channel, up to 6A at a voltage of 32V.
The power supply contains a classic linear transformer and allows operation in constant voltage (CV) mode in the range from 0 to 32V or in constant current (CC) mode from 0 to 6A. In addition, there is a USB connector on the front panel, which can be used to charge, for example, a mobile phone with a voltage of 5V and a current of up to 3A.
The laboratory power supply has an EBTN display with three high-precision indicators that simultaneously display voltage, current, and power with 4-digit accuracy.
Programmable power supply. It has 5 memories for easy storage and recall of set modes and a lock button to prevent unwanted parameter changes. On the back of the power supply case are the USB-Device and RS232 connectors and the DIGITAL I/O interface for remote control of the power supply. Using the supplied software, it is possible to record and display in real time on the connected PC in an Excel table or graph the consumption or load characteristics of the connected load, and based on SCPI communication commands, it is possible to communicate with the computer.
Regular calibrations can be performed using software.
The power supply contains an overload-controlled temperature fan by the laboratory power supply, the long temperature transformer power supply from the laboratory power supply is transformed by an overload fan. which shuts down the power supply when the limit value is reached and restarts it after cooling.

Product parameters:

– Fine software adjustment of output voltage and current
– Three four-digit displays for immediate control of voltage, current, and power
– voltage setting from 0 to 32V at a current resolution of 0 to 32V at 6mV with a resolution of 60V and a resolution of 1mA
– operation of the source in constant voltage (CV) or constant current (CC) mode
– overvoltage protection (OVP), overcurrent protection (OCP), overtemperature protection (OTP)
– a channel for charging, e.g., a mobile phone via the USB connector on the front panel
– USB interface, RS232, DIGITAL I/O on rear panel
– built-in buzzer to indicate status changes
– lock buttons to prevent unwanted changes to settings
– Smart temperature control from the cooling fan
– proper disconnection of the power supply in case of transformer overload
– on the back, input voltage selector 110V/120V/220V/230V (AC 50/60Hz)

Technical parameters:

– nominal output voltage: 0 to 32V
– nominal output current: 0 to 32V
– Nominal output current: 0 to approx. 192 W
– voltage/current setting resolution: 10 mV/1 mA
– Accuracy of voltage setting in CV mode: ≤ (0.01% of measured value +3mV)
– Current setting accuracy in DC mode: ≤ (0.1% of measured value and noise +3mA (-5 mA) 20MHz) at main output: ≤2mV RMS / ≤3mA RMS
– Nominal voltage/current protection at USB output: 5V ± 5%/3A
– temperature coefficient voltage//current: ≤ 300ppm/°C // ≤ 300ppm/°C // ≤ 300ppm/°C supply voltage
-°C 110V/120V/220V/230V / (50/60Hz)
– protection (at the 110/120V/AC power supply): tube fuse type: T6.3AL/250V (20x5mm)
– protection (with 220/230/230/AC power supply type: T6.3AL/250V/AC power supply): 35V/250V (20x5mm)
– dimensions (width x height x depth): 136 x 194 x 327 mm
– weight: approx. 7.5 kg

Contents of individual packaging:

– UDP1306C laboratory power supply: 1 pc.
– power cable: 1 piece
– USB-A to USB-B interface cable (UT-D14): 1 piece
– set of connection cables with crocodile clips:/-1 set of crocodile clips:/-1 piece
– instructions for use: 1 piece
– on request RS232 communication cable: 1 pc

Packaging for bulk customers:

– standard quantity per box: 1 piece
– standard box dimensions: 505 x 270 x 335 mm – gross weight of box: 6 kg

MANUFACTURER: UNI-T

PC software download link:
https://instruments.uni-trend.com/EU-EN/powersupplies/udp1306c.html