UNI-T UT-CS07 current clamp sensor

This product comes with a 3-year warranty.

The UT-CS07 is a highly reliable and secure AC and DC clamp meter that serves as a support device for measuring the current of a multimeter. It measures the current passing through the sensor and converts the current value into a voltage value. The converted voltage is then transmitted to the multimeter via a cable, and the multimeter displays the corresponding values. It can measure up to 1000 A of AC/DC current.
Reliable measurement accuracy and unique external design make it a practical tool for current detection. .

Product parameters:

– compact design, easy to operate
– Using it together with a multimeter allows you to obtain accurate data.
– thin clips with a diameter of 35 mm, suitable for dense cabling
– Compatible with multimeters: UT1196C, UT1196C, UT1196C, UT197, UT197PV, and others
– AC/DC current: 1000A
– Frequency range: 45 Hz to 400 Hz
– Zero function
– AC/DC input protection 1000 A
– Measurement category: CAT III 1500V, CAT IV certification, C/60V:
RoHS

Technical parameters:

– AC current measurement:
100A / 10mV/A / ±(1.5%+0.5A)
1000A / 1mV/A / ±(1.5%+0.5A)
Measuring direct current:
<br/0. / ±(1.5%+0.5A), 45Hz to 200Hz, ± (2.0%+0.5A), 200Hz to 400Hz,
1000A / 1mV/A / ±(2.0%+0.5A), 45Hz to 200.0Hz, +0 (5.0Hz), ±0.2Hz, 400 Hz,

– jaw size: for 35 mm conductor or 65 x 8 mm busbar
– output ratio: 10 mV/A and 1 mV/A
– cord length: 1.1 m
– True RMS depends on the multimeter
– response time depends on frequency
– 40 Hz – 40 Hz Hz
– accuracy: depends on the multimeter
– power supply: AA(R06) 1.5V – 2 pcs; operating current: <50mA
– low battery indicator
– drop test: 1 m
– working environment: 0°C to 30°C (<75%RH), 30°C to 40°C (<50%RH)
– dimensions: 276 x 86 x 50 mm cable length
– approx. 1.1 m