Lithium Battery LiFePO4 48V 5.12kWh, Pytes V5°, LiFePO4 48V 5.12kWh, Pytes V5°, Heated

Pytes V5° battery with integrated heating
How does it work?
The integrated battery heater is powered strictly by the charging source, such as the inverter or charge controller (regardless of the devices supplying current to charge the battery). The heater consumes up to 180 W from the charging source (per battery) and will heat the battery up to 10°C/hour. The heater operates within a typical operating range of -20°C to 10°C. If the battery temperature drops below 5°C, the heater will start using current from the charging source to increase the temperature to 10°C. If the battery temperature is between 2°C - 5°C, the heater will start and the battery will be charged (at the same time) until the battery reaches a temperature of 10°C, at which point the heater will stop and the battery will continue to be charged. If the battery is below 2°C, the charging current will only be directed into the heater until the battery rises above 5°C, at which point the battery will be charged normally. The heater will not affect the SOC of the battery.

The Pytes V5° battery requires 4U of space to allow the bus to properly connect between batteries and to facilitate adequate cooling. For example, you will need a minimum 12U server rack to allow for the installation of three batteries.

Features:
- Charging below freezing temperature
- Integrated long-life battery module with LFP cells, with ≥6000 life cycles
- Intelligent energy management with sophisticated BMS to maximize reliability and longevity, remote update
- Easy connection Up to 300 A in parallel
- High charge/discharge rate fully charged in 1 hour, high power output (1C)

Specifications:
Nominal voltage: 51.2 V
Rated capacity: 100 Ah
Nominal energy: 5.12 kWh
Chemistry: Lithium Iron Phosphate (LiFePO4)
Maximum continuous load current: 100A(1C)
Maximum continuous discharge rate: 100A(1C)
Communication protocol: RS485, CAN
Size (L*W*H): 44cm x 53cm x 14 cm
Weight: ~44kg
Including battery:
2 Flexible busbars 300A
1 CAN / RS485 cascade communication cable
1 grounding cable 10AWG

Download datasheet
Download list of compatible inverters (CAN/RS485)