UNI-T UTG2062B function generator

UNI-T UTG2062B function generator
The UTG2062B arbitrary waveform generator is a modern dual-channel generator that uses direct digital synthesis technology to create a precise and stable output of arbitrary waveforms with a resolution of 1μHz, maximum output frequency of 60 MHz, and sampling rate of 320 MS/s. Signal modulation is available with various modulations such as AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep, etc. from an internal or external source, through linear and logarithmic sweeping. The panel is ergonomically designed for easy operation. The generator is intended for use in the design, development, testing, debugging, and repair of electronic and electroacoustic devices, such as circuits and test devices in cellular and wireless systems, radio and television systems, semiconductor component testing, etc. Thanks to DDS technology, it is capable of generating accurate and clear signals with minimal distortion. An easy-to-use panel with simple operation and a clear display allows you to work much more efficiently and quickly. It has a USB interface and powerful software for transferring data to a computer. Over 160 waveforms are stored in the independent power internal memory, for example, mathematical, bioelectric, medical, trigonometric, antitrigonometric, transients in machines, etc. It has an excellent price/performance ratio and many functions. It can be used in university laboratories, research institutes, etc. This device meets the safety requirements for electronic measuring instruments GB4793 and safety standards IEC 61010-1/2, meets the safety standards for isolated voltage CAT II 300V. possibility to connect both channels
– digital synthesis of DDS signals
– generation of sinusoidal signals with a frequency ranging from 1μHz to 60MHz
– generation of square wave signals with a frequency ranging from 1μHz to 60MHz
– generation of various other waveforms (sine, DC, noise, ramp, triangle, square, pulse) modulation types AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep
– use of modulation signal from internal and external source
– the possibility of entering the signal shape using a mathematical formula
– possibility to enter the phase of the signal in degrees or radians – supports burst signal in degrees or radians output
– accepts internal/external/manual triggering
– High-precision 6-bit frequency measurement up to 200MHz TTL-compatible external signals
– Signal output amplitude up to 10Vpp at 50Ω impedance or up to 20Vpp in high impedance mode
-protection of terminals against frequency overvoltage
201/20 MS
vertical bit resolution
– Ability to store up to 16 groups of variable digital waves
– Front panel USB interface for waveform input
– USB Host interface on rear panel, powerful PC software
– LAN connector on rear panel for firmware updates
– Multifunction button and numeric keypad for easy operation of the system with LCD display
– FT
– FT4. High resolution

Technical parameters:

– output channels: 2
– sampling frequency: 1.28 GS/s (interpolation), 320 MS/s (DDS mode)
– output frequency: up to 60MHz
– frequency resolution: 1μHz, vertical symbol
– frequency resolution: 1μHz inscriptions)
– wavelength of any shape: 8 pts to 16 Mpts
– Non-volatile memory: up to 160 groups of arbitrary curves can be stored
– types and frequencies of signals generated:
sinusoidal: from 1μHz to 60MHz: from 1μHz to 60MHz: rectangular: from 60MHz:
μHzaw:
μHzaw: ramp
from 1μHz to 3MHz
pulse: from 1μHz to 20MHz
anything: from 1μHz to 15MHz
Gaussian noise: up to 60MHz (-3dB)
– DC signal offset (AC+DC peak): ± 5V (high resistance/±-10Ω)V (minimum 50V) rise/fall time of any signal: typically < 7ns
– Amplitude range: 1 mVpp to 10 Vpp (50Ω), 2 mVpp to 20 Vpp (High Z)
– modulation types: AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSKUM, QPSK, OSKUM, operation
modes: output on/off, continuous, modulation, scanning, series
– measurement of TTL-compatible signal frequencies: yes, in the range 100 MHz – 200 MHz with an accuracy of ± 51 ppm
– output impedance: adjustable from 1Ω to 1kΩ, or output short circuit setting from 1Ω to 1kΩ, or short circuit setting
-50, high output factor
-50 yes
– terminal surge protection: at input voltage > ± 12.0V, frequency 100mVpp
– Terminal surge protection: at input voltage > ± 2.0V, frequency <10kHz, amplitude ≤100mVpp, total harmonic distortion 100mVpp
– (typical value): <0.2%
– Accuracy: ± 0.5 ppm at 25°C
– aging rate in the first year: 1 ppm
– temperature coefficient: ± 0.5 ppm /℃
– Temperature coefficient: ＜ 2 ppm /℃, LCD display with diagonal ＜ 2 ppm /℃:
– 4K, FT of 4. „, WVGA (480 x 272 pixels)
– USB device interface: yes
– Power supply: AC 100 V to 240 V, 45 Hz to 440 Hz, CAT II
– power consumption: <50W
– protection: 250 V fuse,-> dimensions: 2 A
– 2 kg 305 x 230 x 93 mm
– product color: white and gray

Contents of individual packaging:

– UTG2062B function generator: 1 pc.
– power cable: 1pc
– USB interface cable: 1 piece
– manual

– (BNC cable)
– 1 piece
– 1 piece

Packaging for wholesale customers:

– standard quantity per box: 2 pieces
– standard box dimensions: 380 x 330 x 320 mm
– gross weight of the box: approx. 8.5 kg

MANUFACTURER: UNI-TREND