UNI-T UT201R Clamp Meter

Clamp Multimeter UNI-T UT201R
This product comes with a 3 year warranty. The UT201R digital clamp is used for measuring AC and DC voltages up to 600V, AC currents up to 400A and voltage frequencies up to 600V. It has protection against voltages greater than 600V on all ranges and audible and optical alarms. Four-digit multi-segment display measuring 37 x 25 mm with backlight and fast refresh rate (3 times/s). Open jaws allow measurement on cables up to 28 mm in diameter. The non-contact electric field sensor (NCV) allows detection of live conductors in two sensitivities -EFLo and - EFHi for low voltage distribution 110V / 50 / 60Hz and 230V / 50 / 60Hz. Probe supplied - tip cover on test leads allows LV distribution measurement in CAT III category without risk of arcing. Without tip caps, test leads can only be measured on low voltage distribution lines in CAT II category. Power supply battery 2pcs 1.5V R03. Power consumption of the meter is approx. 1.8 mA. The circuit has an automatic power saving function. Sleep consumption is <11μA, which effectively extends the battery life to about 400 hours.

Product parameters:

- measurement of high voltage voltage, current and frequency up to 600 V
– non-contact detection of the electric field (NCV)
- alarm and visual protection display greater than audible signal/e.g. 600 V in intervals
– automatic interval switching
– accuracy is guaranteed in the range from 1% to 100% of the interval

Technical parameters:

1. AC current measurement (ranges/resolution/accuracy):

4.000A / 0.001A / 50Hz ~ 100Hz ± (4.0% + 10)
40.00A / 0.010A / 50Hz ~ 100Hz ± 100.0%
(2.0) 0.100A / 50Hz ~ 100Hz ± (2.0% + 10)
- the accuracy of frequency monitoring when measuring AC current in the range from 50 to 100 Hz is ± (1,0% + 5) at 0,1 Hz resolution
- 420A overload protection.
>

AC voltage measurement (range/resolution/accuracy):

4.000V / 0.001V / 10Hz ~ 10kHz ± (1.0% + 5)
40.00V / 0.010V / 10Hz ~ 10kHz ± 0.8%/> / 50.8%/> 0.100V / 10Hz ~ 10kHz ± (0.8% + 5)
600.0V / 1.000V / 10Hz ~ 10kHz ± (0.8% + 5)
- frequency monitoring accuracy when measuring AC voltage in the resolution range from 1,0 % ± 5 to 1,0kHz 0,01 Hz to 0,01 kHz
– overload protection at 600 Vrms
– input impedance approx. 10MGΩ

3. DC voltage measurement (range/resolution/accuracy):

400.0mV / 0.100mV / ± (0.7% + 3)
4.000V / 0.001V / ± (0.5% + 2)
40.00V / 0.00V / ±0.0. 3)
400.0V / 0.100V / ± (0.7% + 3)
600V / 1.000V / ± (0,7% + 3)
– input impedance approx. 10MΩ
– overload protection at 600 Vrms

4. Resistance measurement (range / resolution / accuracy):

400.0Ω / 0.1Ω / ± (1.0% + 2)
4.000kΩ / 0,001kΩ / ± (0,8% + 2)
40.00kΩ / 0.01kΩ / ± (0.01kΩ / ± (0.01kΩ) 2)
400.0kΩ / 0.1kΩ / ± (0.8% + 2)
4.000MΩ / 0.001MΩ / ± (2.0% + 5)
40.00MΩ / 0.01MΩ / ± (2.0% + 5)overload protection at 6.0% + 5)
-50 Vrms

5. Check circuit continuity:

– if the measured resistance is less than 10Ω, the DC circuit signal emits a buzzer
– if the measured resistance is greater than 31 ohms, the open circuit signal does not emit a buzzer
– open circuit voltage approximately 2.0V
– measurement in the field of overload protection
06 at overload
-0Ω Vrms

6. Diode measurement:

- in the forward direction, the voltage drop across the semiconductor junction is less than or equal to 2.0V
– for a silicon junction, a typical voltage drop is 0.5 to 0.8V
– open circuit voltage of approximately 2.2V
- in the measuring range 4.000 V

7. Non-contact electric field sensing (NCV):

- allows detection of live conductors in two sensitivities -EFLo and - EFHi for low voltage distribution 110V/50/60Hz and 230V/50/60Hz.

Other parameters:

- maximum and minimum HOLD measurement value
- anus
- low battery indication: ano
- automatic stop: ano
- 1.5 V battery (R03): 2pcs
– Backlit display size: 37 mm x 25 mm
– product dimensions: 215 mm x 63 mm x 36 mm
- net product weight: 2/4 g
– gray

Package contents:

- UT201R clamp multimeter: 1 pc 40 pcs
– standard box dimensions: 485 mm x 295 mm x 385 mm
- standard gross box weight: 16.6 kg

MANUFACTURER: UNI-TREND
https://www.uni-trend.com/