UNI-T UT-CS06A current clamp sensor

This product comes with a 3 year warranty. The UT-C506A is a highly reliable and safe AC current meter that serves as a supporting device for measuring current with a multimeter. It fits most UNI-T multimeters and has a small and convenient design that is an ideal tool for extending current multimeter ranges. Clamps are used in conjunction with a multimeter, measures current with a sensor and converts the measured current into a voltage, then transmits the voltage to the multimeter with a cable, which displays the corresponding values on the multimeter. The UT-CS06A is capable of measuring AC current up to 400 A. Its reliable measurement accuracy and unique exterior design make it a practical instrument.

Product parameters:

- compact design, easy to use
- light weight allowing one-handed operation, can be measured with several types of cables in the air
- several cable types can be measured. a maximum diameter of 28 mm
- use with a multimeter to get accurate readings without breaking the circuit
- ability to measure AC current up to 400 A, frequency response 50Hz-400Hz
- get a fast output reading of 1mV/A
- measurement category II00V, II CAT6: 300V

Technical parameters:

- current measurement: 1- 400 A AC
- resolution: 0.1A
- AC frequency A: 50 Hz to 400 Hz
- output ratio: 1mV/A
- accuracy ± 0,5%, ± 5,5% 60Hz ±(2.8% +0.5A), 60-400Hz
– drop resistance: 1 m
- suitable for most UNI-T multimeters
- maximum jaw opening: 28 mm
- cable length: 1,1m
- operating temperature: °3-4-10°C -10-50 °C (14-122 °F)
- size: 158 x 65 x 33 mm
- accuracy depends on multimeter
- the actual RMS value depends on the multimeter
- response time Depends on multimeter
- Power supply: no battery needed:
3.