UNI-T UT25CL cable detector

This product comes with a 3-year warranty. The UNI-T UT25CL cable detector is a powerful device consisting of a transmitter and a receiver. With state-of-the-art sensors, it effortlessly tracks cables and wires, saving time and preventing accidental damage during installations or repairs. This tool detects wires, identifies breaks or shorts, tracks underground cables and locates fuses and related equipment. It also detects short circuits and open circuits in in-floor heating, monitors metal water and heating pipes, and supports up to 8 transmitters.

It is ideal for residential or commercial projects.
The UT25CL hand-held detector can be used to detect the routing of low voltage cables buried in the ground (e.g. cables in the wall); to test and diagnose disconnects, shorts and other problems occurring on cables and to determine if the cable under test is live. The transmitter can display the corresponding voltage (power cable voltage: ≥8V), and the receiver can simultaneously display signal strength, transmitter code, transmitter power level, low battery, etc. UT25CL has many advantages including accurate measurement, easy operation, visualized display and more.
Wires etc. interruption of wires, short circuits on wires
- the route of wires buried in the ground
- fuse detection and current circuit assignment
- detection of broken wires and short-circuits in metal underfloor heating distributions
- laying metal pipes for water distribution and heating
- accidentally drawing distribution sockets under sockets hidden under plaster distribution sockets
- automatic or manual receiver sensitivity setting (3 adjustable levels, transmitter: 9 levels)
- flashlight and backlight functions
– automatic shut-off function
- one receiver can support up to 8 transmitters
- live wire detection: up to 480 V (AC/DC)<br/LED signal indication

Technical parameters:

Transmitter:
- output signal: 33 kHz
- Voltage range: 8 V - 480 V AC/DC, 50/60Hz (2.5%)
– LCD display
- display code value
- 0,1,2,3,4,5,6,7
- three signal strength levels: 1, 2, 3
- unipolar test: yes (live conductor test, max. voltage 480 V)
- bipolar test: yes (live conductor test, max. voltage 480 V) input LED
-/> 480 V input voltage indicator
-/> V exceeds 25V, the ELV LED will light up
2. as the voltage increases, the brightness of the ELV LED increases
3. in any other case, the ELV LED will be dimmed or not lit
- Power supply: 6 x 1.5V AA (LR06)
- dimensions: 96 x 1894 x approx. 528 g

Receiver:
- Reception signal: 33 kHz
- cable location mode: approx. 0 - 2.5 m (single-phase application), approx. 0 - 0.5 m (two-pole application)
- Voltage range NCV 80V ~ 1000 V, 50Hz/60Hz
- voltage sensing: approx. 0 - 0.4 m
- code value 0,1,2,2,3,4,5,6,7
- three signal strength levels: 1, 2, 3
– LCD display
- Power supply: 6 x 1.5V AAA (LR03)
- Dimensions: 226 x 68 x/38 mm
- weight: approx. 354g

Other:
- backlighting
- manual sensitivity setting
- overvoltage category CAT III 480V
- IP54 protection
- certificates: CE, RoHS